A new amperometric biosensor for salicylate based on salicylate hydroxylase immobilized on polipyrrole film doped with hexacyanoferrate

Ultrasensitive detection of the reduced form of nicotinamide adenine dinucleotide based on carbon nanotube field effect transistor

We developed a simple, ultrasensitive, and quantitative detection method for the reduced form of nicotinamide adenine dinucleotide (NADH), based on carbon nanotube field effect transistors (CNTFETs). Following the injection of NADH at different concentrations, we obtained different electrical signals from a semiconductor characterization system mimicking biological catalysis of NADH dehydrogenase (CoI). Here, FET was fabricated via photolithography, attaching silicon wells, as the detection chamber, on the channel area of the single wall carbon nanotube (SWCNT). SWCNTs were functionalized with phenazine derivant, a counterpart of the key functional prosthetic group of CoI enzyme. In the presence of NADH, electrons transferred to phenazine derivant through SWCNT, by analogous means of the electron transport chain formed by a series of iron-sulfur (FeS) clusters in CoI. Using this method, the limit of detection was as low as 1 pM, and the range of linear response was 10 pM to 500 nM. Significantly, this approach possesses great potential for applications in real-time detection of NADH at extremely low concentrations, and rigorous analysis for NADH in electrochemical fields.

Anodic Determination of Acetylsalicylic Acid at a Mildly Oxidized Boron-Doped Diamond Electrode in Sodium Sulphate Medium

Differential pulse voltammetry (DPV) and chronoamperometry (CA) were used to detect and determine acetylsalicylic acid (ASA) at a mildly oxidized boron-doped diamond (BDD) electrode in a neutral sodium sulphate solution as supporting electrolyte. ASA determination in unbuffered medium was achieved using neutralized standard and real samples. Over the concentration range of 0.01 mM–0.1 mM, linear calibration plots of anodic current peaks in DPV and anodic currents in CA experiments versus concentration were obtained with very high correlation coefficients and good sensitivity values. The limits of detection were situated around 1 μM. The association of DPV and CA techniques with standard addition method represented a suitable option for the determination of ASA in real samples such as pharmaceutical formulations.

Electrochemical biosensors in pharmaceutical analysis

Given the increasing demand for practical and low-cost analytical techniques, biosensors have attracted attention for use in the quality analysis of drugs, medicines, and other analytes of interest in the pharmaceutical area. Biosensors allow quantification not only of the active component in pharmaceutical formulations, but also the analysis of degradation products and metabolites in biological fluids. Thus, this article presents a brief review of biosensor use in pharmaceutical analysis, focusing on enzymatic electrochemical sensors.

Salicylic acid determination in cow urine and drugs using a bienzymatic sensor

An enzymatic biosensor was developed for salicylic acid (salicylate ion) determined using a Clark type gas diffusion electrode and two enzymes (tyrosinase and salicylate hydroxylase) entrapped in a cellulose triacetate membrane. After optimization, the method was applied to the determination of salicylic acid in cow urine. Relatively good recoveries were achieved, between about 83% and 109%, using the calibration curve, and acceptable precision (R.S.D. about 8%). The method is now being tested for the determination of salicylic acid contained in commercially available drug specialities or galenic products. So far agreement with nominal values has been found to be between 75% and 110% with a R.S.D. of less than 8%.

A bioelectrochemical polypyrrole-containing Fe(CN)6(3-) interface for the design of a NAD-dependent reagentless biosensor

Ferricyanide ions were immobilized on a platinum electrode surface by means of an electrochemically grown polypyrrole film. The entrapped Fe(CN)6(3-)/Fe(CN)6(4-) redox system displayed a high heterogeneous electron transfer rate. The resulting modified electrode was efficient for the ferricyanide-mediated NADH oxidation catalyzed by a diaphorase. The bioelectrochemical interface was applied to the design of a reagentless amperometric D-lactate biosensor. A weakly polarized two polypyrrole-containing Fe(CN)6(3-) modified electrode system was involved without any reference. An enzymatic solution containing D-lactate dehydrogenase, diaphorase and NAD-dextran was further confined on the sensing electrode using a semi-permeable membrane. The sensitivity and the response time of the reagentless biosensor were similar to those of the analogous sensor working with soluble mediator and cofactor, i.e. 25 microA mM(-1) cm(-2) and 120 s, respectively. The other analytical performances were less satisfactorily: the detection limit was 5 x 10 mmol L(-1) and the linearity range was comprised between 0.1 and 0.5 mmol L(-1).

Cofactor recycling with immobilized heterologous cytochrome P450 105D1 (CYP105D1)

Immobilisation of cells and enzymes can be a convenient and rapid way for testing and transforming substances. Cytochromes P450 may be useful in numerous biotransformations of varied lipophilic substrates, performing both regio- and stereo-specific monooxygenation reactions. However, one limitation of their use in vitro is the requirement of cofactor for the supply of electrons in the catalytic cycle. Here we report CYP105D1 from Streptomyces griseus expressed in Escherichia coli can be immobilised from cell-free extracts using DE52, that the immobilised protein is active in bioconversions and that a requirement for cofactor can be sustained by a recycling system for NADH regeneration.