On-line preconcentration system for lanthanum determination in urine using FI–ICP-AES

ICP-AES detection of ultratrace aluminum(III) and chromium(III) ions with a microcolumn preconcentration system using dynamically immobilized 8-hydroxyquinoline on TiO2 nanoparticles

Titanium dioxide nanoparticle dynamically loaded with 8-hydroxyquinoline (nanometer TiO2-Oxine) was used as a solid-phase extractant for the preconcentration of trace amounts of aluminum(III) and chromium(III) prior to their determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). The optimal conditions for preparing nanometer TiO2-Oxine were obtained. Also, the separation/preconcentration conditions of analytes, including the effects of the pH, the sample flow rate and the volume, the elution solution and the interfering ions on the recovery of the analytes were investigated. At pH 6.0, the adsorption capacity of nanometer TiO2-Oxine was found to be 5.23 mg g(-1) and 9.58 mg g(-1) for Al(III) and Cr(III), respectively. An enrichment factor of 50 was achieved by this method, and the detection limits (3sigma) for Al(III) and Cr(III) were 1.96 and 0.32 microg L(-1) respectively. The proposed method was applied for the determination of trace Al(III) and Cr(III) in biological samples and lake water with satisfactory results.

Development and application of acousto-optic background correction for inductively coupled plasma atomic emission spectrometry

In two configurations, a solid-state acousto-optic (AO) deflector or modulator is mounted in a 0.5 m monochromator for background correction with inductively coupled plasma atomic emission spectrometry (ICP-AES). A fused silica acousto-optic modulator (AOM) is used in the ultraviolet (UV) spectral region applications while a glass AO deflector (AOD) is used for the visible (VIS) region. The system provides rapid sequential observation of adjacent on- and off-line wavelengths for background correction. Seventeen elements are examined using pneumatic nebulization (PN) and electrothermal vaporization (ETV) sample introduction. Calibration plots were obtained with each sample introduction technique. Potable water and vitamin tablets were analyzed. Flame atomic absorption (FAA) was used to verify the accuracy of the AO background correction system.

On-line preconcentration and determination of chromium in parenteral solutions by flow injection-flame atomic absorption spectrometry

An on-line chromium preconcentration and determination system implemented with flame atomic absorption spectrometry (FAAS) associated to flow injection (FI) was studied. For the retention of chromium, 4-(2-Thiazolylazo)-resorcinol (TAR) and Amberlite XAD-16 were used, at pH 5.0. The Cr-TAR complex was removed from the micro-column with ethanol. An enrichment factor of 50 was obtained for the preconcentration of 50 ml of sample solution. The detection limit value for the preconcentration of 50 ml of aqueous solution of Cr was 20 ng l(-1). The precision for ten replicate determinations at the 5 microg l(-1) Cr levels was 2.9% relative standard deviation (RSD), calculated from the peak heights obtained. The calibration graph using the preconcentration system for chromium was linear with a correlation coefficient of 0.9997 at levels near the detection limits up to at least 100 microg l(-1). The method was successfully applied to the determination of chromium in parenteral solution samples.

Quinoline-8-ol and its derivatives as preconcentration agents in flow injection analysis coupled to atomic and molecular spectrometric techniques

Quinoline-8-ol, one of the most popular and versatile organic reagents, is known to react with several metals, because it has both a basic nitrogen and a phenolic group. Hence, quinoline-8-ol and its derivatives have been widely used as chelating and/or sorbent extraction agents in on-line flow injection analysis (FIA) along with a suitable detection technique. The state of the art for using quinoline-8-ol and its derivatives in FIA was studied in terms of the selectivity, sensitivity and precision. Emphasis was placed on validating these procedures by analyzing certified reference materials and applying these analytical methodologies to real samples for the determination of inorganics.