Disposable DNA electrochemical biosensors for environmental monitoring

Electrochemical DNA sensors for drug determination

In this review, recent achievements in the development of the DNA biosensors developed for the drug determination have been presented with particular emphasis to the main principles of their assembling and signal measurement approaches. The design of the DNA sensors is considered with characterization of auxiliary components and their necessity for the biosensor operation. Carbon nanomaterials, metals and their complexes as well as electropolymerized polymers are briefly described in the assembly of DNA sensors. The performance of the DNA sensors is summarized within 2017-2022 for various drugs and factors influencing the sensitivity and selectivity of the response are discussed. Special attention is paid to the mechanism of the signal generation and possible drawbacks in the analysis of real samples.

Electrochemical DNA Sensor Based on Carbon Black-Poly(Methylene Blue)-Poly(Neutral Red) Composite

The detection of small molecules interacting with DNA is important for the assessment of potential hazards related to the application of rather toxic antitumor drugs, and for distinguishing the factors related to thermal and oxidative DNA damage. In this work, a novel electrochemical DNA sensor has been proposed for the determination of antitumor drugs. For DNA sensor assembling, a glassy carbon electrode was modified with carbon black dispersed in DMF. After that, pillar [5]arene was adsorbed and Methylene blue and Neutral red were consecutively electropolymerized onto the carbon black layer. To increase sensitivity of intercalator detection, DNA was first mixed with water-soluble thiacalixarene bearing quaternary ammonium groups in the substituents at the lower rim. The deposition of the mixture on the electropolymerized dyes made it possible to detect doxorubicin as model intercalator by suppression of the redox activity of the polymerization products. The DNA sensor made it possible to determine 0.5 pM-1.0 nM doxorubicin (limit of detection 0.13 pM) with 20 min of incubation. The DNA sensor was successfully tested on spiked samples of human plasma and doxorubicin medication.

Phytochemicals toward Green (Bio)sensing

Because of numerous inherent and unique characteristics of phytochemicals as bioactive compounds derived from plants, they have been widely used as one of the most interesting nature-based compounds in a myriad of fields. Moreover, a wide variety of phytochemicals offer a plethora of fascinating optical and electrochemical features that pave the way toward their development as optical and electrochemical (bio)sensors for clinical/health diagnostics, environmental monitoring, food quality control, and bioimaging. In the current review, we highlight how phytochemicals have been tailored and used for a wide variety of optical and electrochemical (bio)sensing and bioimaging applications, after classifying and introducing them according to their chemical structures. Finally, the current challenges and future directions/perspective on the optical and electrochemical (bio)sensing applications of phytochemicals are discussed with the goal of further expanding their potential applications in (bio)sensing technology. Regarding the advantageous features of phytochemicals as highly promising and potential biomaterials, we envisage that many of the existing chemical-based (bio)sensors will be replaced by phytochemical-based ones in the near future.

Label-Free Electrochemical Detection of DNA Hybridization Related to Anthrax Lethal Factor by using Carbon Nanotube Modified Sensors

Background:

Anthrax Lethal Factor (ANT) is the dominant virulence factor produced by B. anthracis and is the major cause of death of infected animals. In this paper, pencil graphite electrodes GE were modified with single-walled and multi-walled carbon nanotubes (CNTs) for the detection of hybridization related to the ANT DNA for the first time in the literature.

Methods:

The electrochemical monitoring of label-free DNA hybridization related to ANT DNA was explored using both SCNT and MCNT modified PGEs with differential pulse voltammetry (DPV). The performance characteristics of ANT-DNA hybridization on disposable GEs were explored by measuring the guanine signal in terms of optimum analytical conditions; the concentration of SCNT and MCNT, the concentrations of probe and target, and also the hybridization time. Under the optimum conditions, the selectivity of probe modified electrodes was tested and the detection limit was calculated.

Results:

The selectivity of ANT probes immobilized onto MCNT-GEs was tested in the presence of hybridization of probe with NC no response was observed and with MM, smaller responses were observed in comparison to full-match DNA hybridization case. Even though there are unwanted substituents in the mixture samples containing both the target and NC in the ratio 1:1 and both the target and MM in the ratio 1:1, it has been found that ANT probe immobilized CNT modified graphite sensor can also select its target by resulting with 20.9% decreased response in comparison to the one measured in the case of full-match DNA hybridization case Therefore, it was concluded that the detection of direct DNA hybridization was performed by using MCNT-GEs with an acceptable selectivity.

Conclusion:

Disposable SCNT/MCNT modified GEs bring some important advantages to our assay including easy use, cost-effectiveness and giving a response in a shorter time compared to unmodified PGE, carbon paste electrode and glassy carbon electrode developed for electrochemical monitoring of DNA hybridization. Consequently, the detection of DNA hybridization related to the ANT DNA by MCNT modified sensors was performed by using lower CNT, probe and target concentrations, in a shorter hybridization time and resulting in a lower detection limit according to the SCNT modified sensors. In conclusion, MCNT modified sensors can yield the possibilities leading to the development of nucleic acid sensors platforms for the improvement of fast and cost-effective detection systems with respect to DNA chip technology.

Biosensors for wastewater monitoring: A review

Water pollution and habitat degradation are the cause of increasing water scarcity and decline in aquatic biodiversity. While the freshwater availability has been declining through past decades, water demand has continued to increase particularly in areas with arid and semi-arid climate. Monitoring of pollutants in wastewater effluents are critical to identifying water pollution area for treatment. Conventional detection methods are not effective in tracing multiple harmful components in wastewater due to their variability along different times and sources. Currently, the development of biosensing instruments attracted significant attention because of their high sensitivity, selectivity, reliability, simplicity, low-cost and real-time response. This paper provides a general overview on reported biosensors, which have been applied for the recognition of important organic chemicals, heavy metals, and microorganisms in dark waters. The significance and successes of nanotechnology in the field of biomolecular detection are also reviewed. The commercially available biosensors and their main challenges in wastewater monitoring are finally discussed.

Gold Nanoparticles dotted Reduction Graphene Oxide Nanocomposite Based Electrochemical Aptasensor for Selective, Rapid, Sensitive and Congener-Specific PCB77 Detection

Gold nanoparticles (AuNP) dotted reduction graphene oxide (RGO-AuNP) is used as a platform for an aptamer biosensor to selectively detect 3,3′4,4′-polychlorinated biphenyls (PCB77). By anchoring aptamers onto the binding sites of RGO-AuNP and making use of the synergy effect of RGO and AuNP, the RGO-AuNP based biosensor exhibits superior analytical performances to AuNP based biosensor in terms of sensitivity and repeatability. The sensitivity of RGO-AuNP based aptamers (RGO-AuNP-Ap) biosensor (226.8 μA cm⁻²) is nearly two times higher than that of Au based biosensors (AuNP-Ap/Au electrode, 147.2 μA cm⁻²). The RGO-AuNP-Ap/Au biosensor demonstrated a linear response for PCB77 concentrations between 1 pg L⁻¹ and 10 μg L⁻¹, with a low limit of detection (LOD) of 0.1 pg L⁻¹. The superb LOD satisfies the exposure thresholds (uncontaminated water < 0.1 ng L⁻¹) set out by International Agency for Research on Cancer (IARC) and the Environmental Protection Agency (EPA). The proposed biosensor can be a powerful tool for rapid, sensitive and selective detection of PCBs on site.

Biosensors for the Detection of Environmental and Urban Pollutions

Release of harmful pollutants such as heavy metals, pesticides, and pharmaceuticals to the environment is a global concern. Rapid and reproducible detection of these pollutants is thus necessary. Biosensors are the sensitive and high specific tools for detection of environmental pollutants. Broad range various types of biosensors have been fabricated for this purpose. This review focuses on the feature and application of biosensors developed for environmental and urban pollutants detection. J. Cell. Biochem. 119: 207-212, 2018. © 2017 Wiley Periodicals, Inc.

Label-free electrochemiluminescence detection of specific-sequence DNA based on DNA probes capped ion nanochannels

A label-free electrochemiluminescence method for detecting specific-sequence DNA has been developed based on DNA probes capped ion nanochannels. This method is simple, inexpensive, and can be potentially expanded for the design of different types of ECL aptasensors.

A PCR based magnetic assembled sensor for ultrasensitive DNA detection

An ultrasensitive method for DNA detection based on magnetic assembly induced by polymerase chain reaction (PCR) was developed. The sensor showed a low limit of detection (LOD) of 4.26 aM with a wide range of target DNA from 0.01 fM to 10,000 fM.

Determination for Enterobacter cloacae based on a europium ternary complex labeled DNA probe

The fast detection and accurate diagnosis of the prevalent pathogenic bacteria is very important for the treatment of disease. Nowadays, fluorescence techniques are important tools for diagnosis. A two-probe tandem DNA hybridization assay was designed for the detection of Enterobacter cloacae based on time-resolved fluorescence. In this work, the authors synthesized a novel europium ternary complex Eu(TTA)(3)(5-NH(2)-phen) with intense luminescence, high fluorescence quantum yield and long lifetime before. We developed a method based on this europium complex for the specific detection of original extracted DNA from E. cloacae. In the hybridization assay format, the reporter probe was labeled with Eu(TTA)(3)(5-NH(2)-phen) on the 5'-terminus, and the capture probe capture probe was covalent immobilized on the surface of the glutaraldehyde treated glass slides. The original extracted DNA of samples was directly used without any DNA purification and amplification. The detection was conducted by monitoring the fluorescence intensity from the glass surface after DNA hybridization. The detection limit of the DNA was 5×10(-10) mol L(-1). The results of the present work proved that this new approach was easy to operate with high sensitivity and specificity. It could be conducted as a powerful tool for the detection of pathogen microorganisms in the environment.

Label-free electrochemical detection of the specific oligonucleotide sequence of dengue virus type 1 on pencil graphite electrodes

A biosensor that relies on the adsorption immobilization of the 18-mer single-stranded nucleic acid related to dengue virus gene 1 on activated pencil graphite was developed. Hybridization between the probe and its complementary oligonucleotides (the target) was investigated by monitoring guanine oxidation by differential pulse voltammetry (DPV). The pencil graphite electrode was made of ordinary pencil lead (type 4B). The polished surface of the working electrode was activated by applying a potential of 1.8 V for 5 min. Afterward, the dengue oligonucleotides probe was immobilized on the activated electrode by applying 0.5 V to the electrode in 0.5 M acetate buffer (pH 5.0) for 5 min. The hybridization process was carried out by incubating at the annealing temperature of the oligonucleotides. A time of five minutes and concentration of 1 μM were found to be the optimal conditions for probe immobilization. The electrochemical detection of annealing between the DNA probe (TS-1P) immobilized on the modified electrode, and the target (TS-1T) was achieved. The target could be quantified in a range from 1 to 40 nM with good linearity and a detection limit of 0.92 nM. The specificity of the electrochemical biosensor was tested using non-complementary sequences of dengue virus 2 and 3.

Preparation and characterization of zinc oxide nanoparticles and their sensor applications for electrochemical monitoring of nucleic acid hybridization

In this study, ZnO nanoparticles (ZNP) of approximately 30 nm in size were synthesized by the hydrothermal method and characterized by X-ray diffraction (XRD), Braun-Emmet-Teller (BET) N2 adsorption analysis and transmission electron microscopy (TEM). ZnO nanoparticles enriched with poly(vinylferrocenium) (PVF+) modified single-use graphite electrodes were then developed for the electrochemical monitoring of nucleic acid hybridization related to the Hepatitis B Virus (HBV). Firstly, the surfaces of polymer modified and polymer-ZnO nanoparticle modified single-use pencil graphite electrodes (PGEs) were characterized using scanning electron microscopy (SEM). The electrochemical behavior of these electrodes was also investigated using differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS). Subsequently, the polymer-ZnO nanoparticle modified PGEs were evaluated for the electrochemical detection of DNA based on the changes at the guanine oxidation signals. Various modifications in DNA oligonucleotides and probe concentrations were examined in order to optimize the electrochemical signals that were generated by means of nucleic acid hybridization. After the optimization studies, the sequence-selective DNA hybridization was investigated in the case of a complementary amino linked probe (target), or noncomplementary (NC) sequences, or target and mismatch (MM) mixture in the ratio of (1:1).

Review: Carbon nanotube based electrochemical sensors for biomolecules

Carbon nanotubes (CNTs) have been incorporated in electrochemical sensors to decrease overpotential and improve sensitivity. In this review, we focus on recent literature that describes how CNT-based electrochemical sensors are being developed to detect neurotransmitters, proteins, small molecules such as glucose, and DNA. Different types of electrochemical methods are used in these sensors including direct electrochemical detection with amperometry or voltammetry, indirect detection of an oxidation product using enzyme sensors, and detection of conductivity changes using CNT-field effect transistors (FETs). Future challenges for the field include miniaturizing sensors, developing methods to use only a specific nanotube allotrope, and simplifying manufacturing.

Voltammetric studies on the HIV-1 inhibitory drug Efavirenz: the interaction between dsDNA and drug using electrochemical DNA biosensor and adsorptive stripping voltammetric determination on disposable pencil graphite electrode

The interaction of Efavirenz (EFV) with fish sperm dsDNA immobilized onto pencil graphite electrode (PGE) has been studied by using differential pulse voltammetric technique using an electrochemical DNA biosensor. The guanine signal was lower with (double stranded-DNA) dsDNA-treated PGE than the untreated electrode after the interaction with EFV occurred. The changes in the experimental parameters such as the accumulation time and the concentration of EFV were also studied. All necessary parameters such as sensitivity, selectivity, accuracy and precision were calculated. In addition, the detection and determination limits, reproducibility and applicability of the analysis to pharmaceutical dosage forms were also investigated. These results showed that this DNA biosensor could be used for the sensitive, rapid simple and cost effective detection and determination of EFV-dsDNA interaction. The linearity was between 2 and 24 ppm of EFV concentration on guanine signal decreasing curve. EFV showed an irreversible oxidation behavior at all investigated pH values. This oxidation step was adsorption controlled on PGE. Hence, differential pulse adsorptive stripping (AdsDPV) voltammetric method was developed for the determination of EFV. Accumulation time and potential were optimized. Under these conditions, the current showed a linear dependence with concentration in the range between 0.018 and 2.56 ppm. Both determination methods were fully validated and applied for the analysis of EFV pharmaceutical dosage form.

Status of biomolecular recognition using electrochemical techniques

The use of nanoscale materials (e.g., nanoparticles, nanowires, and nanorods) for electrochemical biosensing has seen explosive growth in recent years following the discovery of carbon nanotubes by Sumio Ijima in 1991. Although the resulting label-free sensors could potentially simplify the molecular recognition process, there are several important hurdles to be overcome. These include issues of validating the biosensor on statistically large population of real samples rather than the commonly reported relatively short synthetic oligonucleotides, pristine laboratory standards or bioreagents; multiplexing the sensors to accommodate high-throughput, multianalyte detection as well as application in complex clinical and environmental samples. This article reviews the status of biomolecular recognition using electrochemical detection by analyzing the trends, limitations, challenges and commercial devices in the field of electrochemical biosensors. It provides a survey of recent advances in electrochemical biosensors including integrated microelectrode arrays with microfluidic technologies, commercial multiplex electrochemical biosensors, aptamer-based sensors, and metal-enhanced electrochemical detection (MED), with limits of detection in the attomole range. Novel applications are also reviewed for cancer monitoring, detection of food pathogens, as well as recent advances in electrochemical glucose biosensors.

Sensors and Biosensors for the Determination of Small Molecule Biological Toxins

The following review of sensors and biosensors focuses on the determination of commonly studied small molecule biological toxins, including mycotoxins and small molecule neurotoxins. Because of the high toxicity of small molecule toxins, an effective analysis technique for determining their toxicity is indispensable. Sensors and biosensors have emerged as sensitive and rapid techniques for toxicity analysis in the past decade. Several different sensors for the determination of mycotoxins and other small molecule neurotoxins have been reported in the literature, and many of these sensors such as tissue biosensors, enzyme sensors, optical immunosensors, electrochemical sensors, quartz crystal sensors, and surface plasmon resonance biosensors are reviewed in this paper. Sensors are a practical and convenient monitoring tool in the area of routine analysis, and their specificity, sensitivity, reproducibility and analysis stability should all be improved in future work. In addition, accuracy field portable sensing devices and multiplexing analysis devices will be important requirement for the future.