NH4+-sensitive chemically modified field effect transistors based on siloxane membranes for flow-cell applications

Use of organofunctionalized nanoporous silica gel to improve the lifetime of carbon paste electrode for determination of copper(II) ions

A new functionalized nanoporous silica gel with dipyridyl group (DPNSG) was synthesized. Then, the potentiometric response of the copper(II) ion was investigated at a carbon paste electrode chemically modified with this newly designed functionalized nanoporous silica gel. The electrodes with DPNSG proportions of 15.0% (w/w) demonstrated very stable potentials. Calibration plots with Nernstian slopes for Cu2+ were observed, 28.4 (+/-1.0) mV decade(-1), over a wide linear concentration range (1.0x10(-7) to 1.0x10(-2) M). The electrode exhibited a detection limit of 8.0x10(-8) M. Moreover, the selectivity coefficients measured by the match potential method in acetate buffer, pH 5.5, were investigated. The electrode presented a response time of approximately 50s, high performance, high sensitivity in a wide range of cation activities and good long-term stability (more than 9 months). The method was satisfactory and was used to determine the copper ion concentration in waste waters, contaminated by this metal.

Tailored chemosensors for chloroaromatic acids using molecular imprinted TiO2 thin films on ion-sensitive field-effect transistors

The SiO2 gate of an ion-sensitive field-effect transistor, (ISFET), is functionalized with a TiO2 film that includes imprinted molecular sites for 4-chlorophenoxy acetic acid, (1), or 2,4-dichlorophenoxy acetic acid, (2). The functionalized devices that include the imprinted interfaces reveal an impressive selectivity in the sensing of the imprinted substrates Na+ -1 or Na+ -2. The detection limit for Na+ -1 is (5+/-2) x 10(-4) M, which corresponds to 38 mV x dec(-1) in the concentration range of 0.5 to 6 mM. The detection limit for the analysis of Na+ -2 is (1.0+/-0.2) x 10(-5) M, which corresponds to 28 mV dec(-1) in the concentration range 0.1-9.0 mM. The equilibration time of the devices is ca. 5 min.