Facile chemiluminescent method for alkaline phosphatase determination

Polymer-enhanced peroxidase activity of ceria nanozyme for highly sensitive detection of alkaline phosphatase

Nanoceria have demonstrated a wide array of catalytic activity similar to natural enzymes, holding considerable significance in the colorimetric detection of alkaline phosphatase (ALP), which is a biomarker of various biological disorders. However, the issues of physiological stability and formation of protein corona, which are strongly related to their surface chemistry, limit their practical application. In this work, CeO2 nanoparticles characterized by enhanced dimensional uniformity and specific surface area were synthesized, followed by encapsulation with various polymers to further increase catalytic activity and physiological stability. Notably, the CeO2 nanoparticles encapsulated within each polymer exhibited improved catalytic characteristics, with PAA-capped CeO2 exhibiting the highest performance. We further demonstrated that the PAA-CeO2 obtained with enhanced catalytic activity was attributed to an increase in surface negative charge. PAA-CeO2 enabled the quantitative assessment of AA activity within a wide concentration range of 10 to 60 μM, with a detection limit of 0.111 μM. Similarly, it allowed for the evaluation of alkaline phosphatase activity throughout a broad range of 10 to 80 U/L, with a detection limit of 0.12 U/L. These detection limits provided adequate sensitivity for the practical detection of ALP in human serum.

A simple enzyme-catalyzed reaction induced "switch" type fluorescence biosensor based on carbon nitride nanosheets for the assay of alkaline phosphatase activity

An enzyme-catalyzed fluorescence "switch" type sensor was constructed for the determination of alkaline phosphatase (ALP) activity by combining the fluorescence quenching effect of Ag+ on ultrathin g-C3N4 nanosheets (CNNSs) with the simple redox reaction of AA and Ag+. Briefly, Ag+ exhibits a significant quenching effect on the fluorescence of CNNSs. Thus the fluorescence signal of the CNNS-Ag+ system is extremely weak even in the presence of l-ascorbic acid-2-phosphate (AAP) ("off" state). When ALP coexists in the system, the enzyme can specifically catalyze the hydrolysis of AAP to form ascorbic acid (AA), which reduces Ag+ to Ag0. In this case, the fluorescence signal of the system is recovered ("on" state). Based on this principle, a signal-enhanced CNNS fluorescence sensor was developed to determine the activity of alkaline phosphatase. The experimental results show that the detection range of alkaline phosphatase is 0.5-20 U L-1, and the detection limit is 0.05 U L-1 (S/N = 3). Meanwhile, this method was used to assay ALP in serum samples.

Overview of Optical and Electrochemical Alkaline Phosphatase (ALP) Biosensors: Recent Approaches in Cells Culture Techniques

Alkaline phosphatase (ALP), which catalyzes the dephosphorylation process of proteins, nucleic acids, and small molecules, can be found in a variety of tissues (intestine, liver, bone, kidney, and placenta) of almost all living organisms. This enzyme has been extensively used as a biomarker in enzyme immunoassays and molecular biology. ALP is also one of the most commonly assayed enzymes in routine clinical practice. Due to its close relation to a variety of pathological processes, ALP's abnormal level is an important diagnostic biomarker of many human diseases, such as liver dysfunction, bone diseases, kidney acute injury, and cancer. Therefore, the development of convenient and reliable assay methods for monitoring ALP activity/level is extremely important and valuable, not only for clinical diagnoses but also in the area of biomedical research. This paper comprehensively reviews the strategies of optical and electrochemical detection of ALP and discusses the electrochemical techniques that have been addressed to make them suitable for ALP analysis in cell culture.

Immunochemical Micro Imaging Analyses for the Detection of Proteins in Artworks

The present review is aimed at reporting on the most advanced and recent applications of immunochemical imaging techniques for the localization of proteins within complex and multilayered paint stratigraphies. Indeed, a paint sample is usually constituted by the superimposition of different layers whose characterization is fundamental in the evaluation of the state of conservation and for addressing proper restoration interventions. Immunochemical methods, which are based on the high selectivity of antigen-antibody reactions, were proposed some years ago in the field of cultural heritage. In addition to enzyme-linked immunosorbent assays for protein identification, immunochemical imaging methods have also been explored in the last decades, thanks to the possibility to localize the target analytes, thus increasing the amount of information obtained and thereby reducing the number of samples and/or analyses needed for a comprehensive characterization of the sample. In this review, chemiluminescent, spectroscopic and electrochemical imaging detection methods are discussed to illustrate potentialities and limits of advanced immunochemical imaging systems for the analysis of paint cross-sections.

A gold nanoparticles-based colorimetric assay for alkaline phosphatase detection with tunable dynamic range

In this report, a simple and label-free colorimetric assay was developed for detecting alkaline phosphatase (ALP). Based on the conjugated gold nanoparticle/adenosine triphosphate (AuNP/ATP) sensing system, this assay is highly sensitive and selective. In this system, ATP induces the aggregation of cetyltrimethylammonium bromide (CTAB)-capped AuNPs and ALP stimulates the disaggregation of AuNPs by converting ATP into adenosine through an enzymatic dephosphorylation reaction. Hence, the presence of ALP can be visually observed (gray-to-red color change) and monitored by the shift of the surface plasmon resonance (SPR) absorption band of AuNPs. Furthermore, the dynamic range of the method can be varied by addition of different metal ions (e.g. 100-600unit/L to 5.0-100unit/L and 0.2-20unit/L in the presence of Ca(2+) and Pb(2+), respectively). The feasibility of this sensitive and specific assay with a tunable dynamic range was demonstrated to be consistent even in human serum samples.

8-Quinolyl phosphate as a substrate for the fluorimetric determination of alkaline phosphatase

BACKGROUND

Alkaline phosphatase (ALP) is an important target for clinical analysis. 8-Quinolyl phosphate (QP) was developed as a new substrate for the fluorimetric determination of ALP activity.

METHODS

QP is a strong fluorescent substance and the product of the enzyme reaction is 8-hydroxyquinoline (HQ), which has no fluorescence. Under the optimal conditions for the determination of ALP, the decreased fluorescence intensity via the enzyme reaction is proportional to ALP activity. The fluorescence intensity was measured at lambdaex/lambdaem=318/495 nm before and after the enzyme reaction.

RESULTS

QP reacted with ALP in the buffer solution of pH=9.5 and incubated for 20 min at 37.0 degrees C were selected as the optimal conditions for the determination of ALP. The linear range and detection limit for the determination of ALP are 1.0-16.0 and 0.229 U/l, respectively. With this method, ALP could be applied to assess ALP in human serum and the results were evaluated by comparison with a standard colorimetric assay using p-nitrophenyl phosphate as ALP substrate.

CONCLUSIONS

This method is simple, practical and can be used as an alternative to assess ALP in clinical analysis.

Detection of Alkaline Phosphatase Using Surface-Enhanced Raman Spectroscopy

A new approach was developed to detect the activity of alkaline phosphatase (ALP) enzyme at ultralow concentrations using a surface-enhanced Raman scattering (SERS) technique. The approach is based on the use of gold nanoparticles as a SERS material whereas 5-bromo-4-chloro-3-indolyl phosphate (BCIP) is used as a substrate of ALP. The enzymatic hydrolysis of BCIP led to the formation of indigo dye derivatives, which were found to be highly SERS active. For the first time, we were able to detect ALP at a concentration of approximately 4 x 10(-15) M or at single-molecule levels when ALP was incubated with BCIP for 1 h in the Tris-HCl buffer. The same technique also was successfully employed to detect surface-immobilized avidin, and a detection limit of 10 ng/mL was achieved. This new technique allows the detection of both free and labeled ALP as a Raman probe in enzyme immunoassays, immunoblotting, and DNA hybridization assays at ultralow concentrations.

Rapid and highly sensitive electrochemical determination of alkaline phosphatase using a composite tyrosinase biosensor

The use of an amperometric graphite-Teflon composite tyrosinase biosensor for the rapid monitoring of alkaline phosphatase (ALP), with no need of an incubation step and using phenyl phosphate as the substrate, is reported. Phenol generated by the action of ALP is monitored at the tyrosinase composite electrode through the electrochemical reduction of the o-quinone produced to catechol, which produces a cycle between the tyrosinase substrate and the electroactive product, giving rise to the amplification of the biosensor response and to the sensitive detection of ALP. The current was measured at -0.10 V 5 min after the addition of ALP. As a compromise between high ALP activity and high sensitivity for the detection of phenol, a pH of 8.5 was chosen. The substrate concentration was also optimized. A linear calibration plot was obtained for ALP between 2.0 x 10(-13) and 2.5 x 10(-11), with a detection limit of 6.7 x 10(-14) M. Different types of milk were analyzed with good results, using an extremely simple and rapid procedure.