Multi-analyte explosive detection using a fiber optic biosensor

Flexible Stacked Perovskite Photodetectors for High-Efficiency Multicolor Fluorescence Detection

A flexible, multicolor detector based on stacked perovskite layers with graded band gaps was presented. Different perovskite layers generate a series of photocurrents corresponding to light intensities at different wavelengths. Experimentally, the flexible detector demonstrated acceptable long-term stability and temperature stability in the bending state. To demonstrate the advantages of the flexible multicolor detector in biological applications, a tubular-shaped multicolor fluorescence detector that embraces the sample cell was constructed. As a result, the detection limits of three kinds of CdTe quantum dots (QDs) with central wavelengths of 545, 625, and 730 nm were 0.52, 0.85, and 0.43 nM, respectively, which was significantly improved by more than 10 times compared to those of planar detectors. Additionally, the detector was able to detect three kinds of QDs simultaneously in a mixed solution, and the relative deviation was smaller than 10% compared to the preset concentration. These results demonstrate that the flexible stacked perovskite detector and the tubular-shaped detection configuration hold promise for the simultaneous fluorescent detection of multiple biomolecules.

Emerging strategies of engineering retinal organoids and organoid-on-a-chip in modeling intraocular drug delivery: current progress and future perspectives

Retinal diseases are a rising concern as major causes of blindness in an aging society; therapeutic options are limited, and the precise pathogenesis of these diseases remains largely unknown. Intraocular drug delivery and nanomedicines offering targeted, sustained, and controllable delivery are the most challenging and popular topics in ocular drug development and toxicological evaluation. Retinal organoids (ROs) and organoid-on-a-chip (ROoC) are both emerging as promising in-vitro models to faithfully recapitulate human eyes for retinal research in the replacement of experimental animals and primary cells. In this study, we review the generation and application of ROs resembling the human retina in cell subtypes and laminated structures and introduce the emerging engineered ROoC as a technological opportunity to address critical issues. On-chip vascularization, perfusion, and close inter-tissue interactions recreate physiological environments in vitro, whilst integrating with biosensors facilitates real-time analysis and monitoring during organogenesis of the retina representing engineering efforts in ROoC models. We also emphasize that ROs and ROoCs hold the potential for applications in modeling intraocular drug delivery in vitro and developing next-generation retinal drug delivery strategies.

Repetitive Immunosensor with a Fiber-Optic Device and Antibody-Coated Magnetic Beads for Semi-Continuous Monitoring of Escherichia coli O157:H7

A rapid and reproducible fiber-optic immunosensor for Escherichia coli O157:H7 (E. coli O157:H7) was described. The biosensor consisted of a flow cell, an optical fiber with a thin Ni layer, and a PC linked fluorometer. First, the samples with E. coli O157:H7 were incubated with magnetic beads coated with anti-E. coli O157:H7 antibodies and anti-E. coli O157:H7 antibodies labeled cyanine 5 (Cy5) to make sandwich complexes. Then the Cy5-(E. coli O157:H7)-beads were injected into a flow cell and pulled to the magnetized Ni layer on the optical fiber set in the flow cell. An excitation light (λ = 635 nm) was used to illuminate the optical fiber, and the Cy5 florescent molecules facing the optical fiber were exposed to an evanescent wave from the optical fiber. The 670 nm fluorescent light was measured using a photodiode. Finally, the magnetic intensity of the Ni layer was removed and the Cy5-E. coli O157:H7-beads were washed out for the next immunoassay. E. coli O157:H7, diluted with phosphate buffer (PB), was measured from 1 × 10⁵ to 1 × 10⁷ cells/mL. The total time required for an assay was less than 15 min (except for the pretreatment process) and repeating immunoassay on one optical fiber was made possible.

Identification of peptide sequences that selectively bind to pentaerythritol trinitrate hemisuccinate-a surrogate of PETN, via phage display technology

The present research investigates the identification of amino acid sequences that selectively bind to a pentaerythritol tetranitrate (PETN) explosive surrogate. Through the use of a phage display technique and enzyme-linked immunosorbent assays (ELISA), a peptide library was tested against pentaerythritol trinitrate hemisuccinate (PETNH), a surrogate of PETN, to screen for those with amino acids having affinity toward the explosive. The results suggest that the library contains peptides selective to PETNH. Following three rounds of panning, clones were picked and tested for specificity toward PETNH. ELISA results from these samples show that each phage clone has some level of selectivity for binding to PETNH. The peptides from these clones have been sequenced and shown to contain certain common amino acid segments among them. This work represents a technological platform for identifying amino-acid sequences selective toward any bio-chem analyte of interest.

Evaluation of optical detection platforms for multiplexed detection of proteins and the need for point-of-care biosensors for clinical use

This review investigates optical sensor platforms for protein multiplexing, the ability to analyze multiple analytes simultaneously. Multiplexing is becoming increasingly important for clinical needs because disease and therapeutic response often involve the interplay between a variety of complex biological networks encompassing multiple, rather than single, proteins. Multiplexing is generally achieved through one of two routes, either through spatial separation on a surface (different wells or spots) or with the use of unique identifiers/labels (such as spectral separation-different colored dyes, or unique beads-size or color). The strengths and weaknesses of conventional platforms such as immunoassays and new platforms involving protein arrays and lab-on-a-chip technology, including commercially-available devices, are discussed. Three major public health concerns are identified whereby detecting medically-relevant markers using Point-of-Care (POC) multiplex assays could potentially allow for a more efficient diagnosis and treatment of diseases.

Fabrication of surface plasmon resonance sensor surface with control of the non-specific adsorption and affinity for the detection of 2,4,6-trinitrotoluene using an antifouling copolymer

We fabricated a surface plasmon resonance (SPR) sensor using a hydrophilic polymer for the highly sensitive detection of 2,4,6-trinitrotoluene (TNT). The hydrophilic polymer was made from mono-2-(methacryloyloxy)ethylsuccinate (MES) and 2-hydroxyethylmethacrylate (HEMA) by surface-initiated atom transfer radical polymerization. The detection of TNT was carried out by displacement assay with the SPR measurement. In displacement assay, the affinity between anti-TNT antibody and the sensor surface, affects to the sensitivity. In the SPR measurement, non-specific adsorption should be controlled because SPR sensor cannot discriminate between specific and non-specific adsorption. Therefore, the affinity and non-specific adsorption were controlled by changing the ratio of HEMA to MES. A detection limit of 0.4 ng/ml (ppb) for TNT was achieved using a sensor surface with the lowest affinity without non-specific adsorption.

Immunoassays and biosensors for the detection of cyanobacterial toxins in water

Algal blooms are a frequent phenomenon in nearly all kinds of fresh water. Global warming and eutrophication by waste water, air pollution and fertilizers seem to lead to an increased frequency of occurrence. Many cyanobacteria produce hazardous and quite persistent toxins, which can contaminate the respective water bodies. This may limit the use of the raw water for many purposes. The purification of the contaminated water might be quite costly, which makes a continuous and large scale treatment economically unfeasible in many cases. Due to the obvious risks of algal toxins, an online or mobile detection method would be highly desirable. Several biosensor systems have been presented in the literature for this purpose. In this review, their mode of operation, performance and general suitability for the intended purpose will be described and critically discussed. Finally, an outlook on current developments and future prospects will be given.

Campylobacter spp. detection in the 21st century: a review of the recent achievements in biosensor development

Campylobacter spp. are an important cause of acute bacterial diseases in humans worldwide. Many bacterial species in the Campylobacter genus are considered harmful and may cause several infectious diseases. Currently, there are no commercial biosensors available to detect Campylobacter spp. in food matrices, and little to no testing has been done in research laboratories with actual food matrices. Biosensors potentially provide a powerful means to detect Campylobacter spp. with the advantages of high sensitivity (low limits of detection with a high signal to noise ratio), high specificity (able to selectively detect the target among several similar targets), real time sensing, and in-site monitoring. This review summarizes the latest research in biosensing technologies for detection of Campylobacter spp. based on a variety of transducers and recognition elements. Finally, a comparison is made among all recently reported biosensors for the detection of Campylobacter spp.

Rapid detection of nitroaromatic and nitramine explosives on chromatographic paper and their reflectometric sensing on PVC tablets

Rapid and inexpensive sensing of explosive traces in soil and post-blast debris for environmental and criminological purposes with optical sensors has recently gained importance. The developed sensing method for nitro-aromatic and nitramine-based explosives is based on dropping an acetone solution of the analyte to an adsorbent surface, letting the solvent to dry, spraying an analytical reagent to produce a persistent spot, and indirectly measuring its reflectance by means of a miniature spectrometer. This method proved to be useful for on-site determination of nitro-aromatics (trinitrotoluene (TNT), 2,4,6-trinitrophenylmethylnitramine (tetryl) and dinitrotoluene (DNT)) and nitramines (1,3,5-trinitro-1,3,5-triazacyclohexane (RDX) and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX)) pre-adsorbed on a poly vinyl chloride (PVC) surface, with the use of different spray reagents for each group of explosives producing different colors. The calibration equations of the tested compounds as reflectance vs. concentration showed excellent linearity (correlation coefficient: 0.998-0.999). The linear quantification interval in terms of absolute quantity of analyte was 0.1-0.5 μg. The developed method was successfully tested for the analysis of military explosives Comp B and Octol, and was validated against high performance liquid chromatography (HPLC). The reflectometric sensing method could also be used for qualitative identification of the nitrated explosives on a chromatographic paper. The reagent-impregnated paper could also serve as sensor, enabling semi-quantitative determinations of TNT and tetryl.

Early events in 2,4,6-trinitrotoluene (TNT) degradation by porphyrins: binding of TNT to porphyrin by hydrophobic and hydrogen bonds

The interaction of meso-tri(4-sulfonatophenyl)mono(4-carboxyphenyl) porphyrin (C1TPP) with 2,4,6-trinitrotoluene (TNT) has been explored by UV-vis and fluorescence spectroscopy. The influence of temperature on the interaction has also been studied. C1TPP binds to TNT at pH 7.0 at room temperature via 1.94 kcal/mole hydrogen bonds with absorbance loss at 412-413 nm and the appearance of a new peak at 422-424 nm. The hydrogen binding of TNT to C1TPP was confirmed by the dissolution of the complex upon the addition of urea. Increasing the temperature results in the appearance of a new absorbance peak at 540 nm and absorbance loss at 515 nm with activation energy of 29.7 kcal/mole in the range of the hydrophobic bond energy. This suggests the hydrophobic bonding of TNT with the pyrrole nitrogens in the porphyrin. Increasing the concentration of the TNT in the solution quenches the fluorescence of the porphyrin following the Stern-Volmer equation. The association constants calculated from absorbance and fluorescence are expectedly similar.

Sensitive electrochemical immunoassay for 2,4,6-trinitrotoluene based on functionalized silica nanoparticle labels

We present a poly(guanine)-functionalized silica nanoparticle (NP) label-based electrochemical immunoassay for sensitively detecting 2,4,6-trinitrotoluene (TNT). This immunoassay takes advantage of magnetic bead-based platform for competitive displacement immunoreactions and separation, and use electroactive nanoparticles as labels for signal amplification. For this assay, anti-TNT-coated magnetic beads interacted with TNT analog-conjugated poly(guanine)-silica NPs and formed analog-anti-TNT immunocomplexes on magnetic beads. The immunocomplexes coated magnetic beads were exposed to TNT samples, which resulted in displacing the analog conjugated poly(guanine) silica NPs into solution by TNT. In contrast, there are no guanine residues releasing into the solution in the absence of TNT. The reaction solution was then separated from the magnetic beads and transferred to the electrode surface for electrochemical measurements of guanine oxidation with Ru(bpy)3(2+) as mediator. The sensitivity of this TNT assay was greatly enhanced through dual signal amplifications: (1) a large amount of guanine residues on silica nanoparticles are introduced into the test solution by displacement immunoreactions and (2) a Ru(bpy)3(2+)-induced guanine catalytic oxidation further enhances the electrochemical signal. Some experimental parameters for the nanoparticle label-based electrochemical immunoassay were studied and the performance of this assay was evaluated. The method is found to be very sensitive and the detection limit of this assay is approximately 0.1 ng mL(-1) TNT. The electrochemical immunoassay based on the poly[guanine]-functionalized silica NP label offers a new approach for sensitive detection of explosives.

Evaluation of the molecular recognition of monoclonal and polyclonal antibodies for sensitive detection of 2,4,6-trinitrotoluene (TNT) by indirect competitive surface plasmon resonance immunoassay

Detection of TNT is an important environmental and security concern all over the world. We herein report the performance and comparison of four immunoassays for rapid and label-free detection of 2,4,6-trinitrotoluene (TNT) based on surface plasmon resonance (SPR). The immunosensor surface was constructed by immobilization of a home-made 2,4,6-trinitrophenyl-keyhole limpet hemocyanin (TNPh-KLH) conjugate onto an SPR gold surface by simple physical adsorption within 10 min. The immunoreaction of the TNPh-KLH conjugate with four different antibodies, namely, monoclonal anti-TNT antibody (M-TNT Ab), monoclonal anti-trinitrophenol antibody (M-TNP Ab), polyclonal anti-trinitrophenyl antibody (P-TNPh Ab), and polyclonal anti-TNP antibody (P-TNP Ab), was studied by SPR. The principle of indirect competitive immunoreaction was employed for quantification of TNT. Among the four antibodies, the P-TNPh Ab prepared by our group showed highest sensitivity with a detection limit of 0.002 ng/mL (2 ppt) TNT. The lowest detection limits observed with other commercial antibodies were 0.008 ng/mL (8 ppt), 0.25 ng/mL (250 ppt), and 40 ng/mL (ppb) for M-TNT Ab, P-TNP Ab, and M-TNP Ab, respectively, in the similar assay format. The concentration of the conjugate and the antibodies were optimized for use in the immunoassay. The response time for an immunoreaction was 36 s and a single immunocycle could be done within 2 min, including the sensor surface regeneration using pepsin solution. In addition to the quantification of TNT, all immunoassays were evaluated for robustness and cross-reactivity towards several TNT analogs.

Fluorophore-mediated, fiber-optic, multi-analyte, immunosensing system for rapid diagnosis and prognosis of cardiovascular diseases

A prototype of a fiber-optic, multi-analyte, immunobiosensing system was developed to simultaneously quantify disease-representing biomarkers in blood plasma. This system was for simultaneous quantification of two different groups of multi-biomarkers related to cardiovascular diseases (CVD): anticoagulants (protein C, protein S, antithrombin III, and plasminogen) for deficiency diagnosis; and cardiac markers (B-type natriuretic peptide, cardiac troponin I, myoglobin, and C-reactive protein) for coronary heart disease diagnosis. As an initial effort towards the development of a disposable and easy-to-use sensing cartridge as a rapid diagnostic tool for CVD related diseases, a prototype of a flow control system was also developed to automatically perform simultaneous four-analyte quantification. Currently, the system is capable of quantifying the multiple anticoagulants in their clinically significant sensing ranges within 5 minutes, at an average signal-to-noise (S/N) ratio of 25. A simultaneous assay of the four cardiac markers can be performed within 10 min, at an average S/N ratio of 20. When this highly portable multi-analyte sensing system is completed and successfully tested for CVD patient's plasma, it can provide rapid (<10 min) and reliable diagnostic and prognostic information at a patient's bedside.

State of the art and recent advances in immunoanalytical systems

This article is an overview the state of the art and the recent developments in immunosensors. Homogeneous immunosensors, heterogeneous immunosensors, integrated immunosensors and biochip format immunosensors are presented, based on optical, electrochemical, magnetic or mechanical detection/transduction systems.

Evanescent wave fluorescence biosensors

Since discovery and first use in the mid-1970s, evanescent wave fluorescence biosensors have developed into a diverse range of instruments, each designed to meet a particular detection need. In this review, we provide a brief synopsis of what evanescent wave fluorescence biosensors are, how they work, and how they are used. In addition, we have summarized the important patents that have impacted the evolution from laboratory curiosities to fully automated commercial products. Finally, we address the critical issues that evanescent wave fluorescence biosensors will face in the coming years.

Surface plasmon resonance immunosensor for highly sensitive detection of 2,4,6-trinitrotoluene

We have examined the sensing characteristics of a surface plasmon resonance (SPR) immunoassay for the detection of 2,4,6-trinitrotoluene (TNT) using an immunoreaction between 2,4,6-trinitrophenol-ovalbumin (TNP-OVA) conjugate and anti-2,4,6-trinitrophenol antibody (anti-TNP antibody). TNP-OVA conjugate was attached to a SPR-gold sensing surface by means of physical immobilization, which undergoes binding interaction with anti-TNP antibody. Both the immobilization and binding processes were studied from a change in the SPR-resonance angle. The quantification of TNT is based on the principle of indirect competitive immunoassay, in which the immunoreaction between the TNP-OVA conjugate and anti-TNP antibody was inhibited in the presence of free TNT in solution. The decrease in the resonance angle shift is proportional to an increase in concentration of TNT used for incubation. The immunoassay exhibited excellent sensitivity for the detection of TNT in the concentration range from 0.09 to 1000 ng/ml with good stability and reproducibility. The immunosensor developed could detect TNT as low as 0.09 ng/ml, within a response time of approximately 22 min. The sensor surface was regenerated by a brief flow of pepsin solution, which disrupts the antigen-antibody complex without destroying the conjugate biofilm. Cross-reactivity of the SPR sensor to some structurally related nitroaromatic derivative and the detection of TNT in the presence of these nitroaromatic compounds were investigated. The cross-reactivity of the SPR sensor to 2,4-dinitrotoluene (2,4-DNT), 1,3-dinitrobenzene (1,3-DNB), 2-amino-4,6-dinitrotoluene (2A-4,6-DNT) and 4-amino-2,6-dinitrotoluene (4A-2,6-DNT) were very low (< or =1.1%). The analytical characteristics of the proposed immunosensor are highly promising for the development of new field-portable sensors for on-site detection of landmines.

A novel approach to improve specificity of algal biosensors using wild-type and resistant mutants: an application to detect TNT

A new genetic approach was developed for increasing specificity of microalgal biosensors. This method is based on the use of two different genotypes jointly to detect a given pollutant: (i) a sensitive genotype to obtain sensitivity; and (ii) a resistant mutant to obtain specificity. The method was tested by the development of a microalgal biosensor for the detection of the explosive 2,4,6-trinitrotoluene (TNT) using a wild-type strain (DcG1wt) of Dictyosphaerium chlorelloides (Chlorophyceae) as the sensitive organism, and a TNT-resistant mutant, obtained from DcG1wt strain by a modified Luria-Delbrück fluctuation analysis. The inhibition of chlorophyll a fluorescence of PSII by TNT was used as the biological signal. Significant differences in maximal fluorescence of light-adapted algae (F'(m)) between wild-type DcG1wt cells and TNT-resistant mutants, were observed in all the TNT concentrations tested (from 0.5 to 31.3 mg l(-1)) after only 3 min of exposure. Resistant mutants always exhibited significant higher F'(m) values in the presence of TNT than wild-type cells. These results suggest that the use of two different genotypes (sensitive and resistant to a given pollutant) jointly is a useful method to improve microalgal biosensors specificity.

Recent developments, characteristics, and potential applications of electrochemical biosensors

The objective of this study is to analyze the technical importance, performance, techniques, advantages, and disadvantages of the biosensors in general and of the electrochemical biosensors in particular. A product of reaction diffuses to the transducer in the first generation biosensors (based on Clark biosensors). The mediated biosensors or second generation biosensors use specific mediators between the reaction and the transducer to improve sensitivity. The second generation biosensors involve two steps: first, there is a redox reaction between enzyme and substrate that is reoxidized by the mediator, and eventually the mediator is oxidized by the electrode. No normal product or mediator diffusion is directly involved in the third generation biosensors, direct biosensors. Based on the type of transducer, current biosensors are divided into optical, mass, thermal, and electrochemical sensors. They are used in medical diagnostics, food quality controls, environmental monitoring, and other applications. These biosensors are also grouped under two broad categories of sensors: direct and indirect detection systems. Moreover, these systems could be further grouped into continuous or batch operation. Therefore, amperometric biosensors and their current applications are focused on more in detail since they are the most commonly used biosensors in monitoring and diagnosing tests in clinical analysis. Problems related to the commercialization of medical, environmental, and industrial biosensors as well as their performance characteristics, their competitiveness in comparison to the conventional analytical tools, and their costs determine the future development of these biosensors.

Detection of low levels of Listeria monocytogenes cells by using a fiber-optic immunosensor

Biosensor technology has a great potential to meet the need for sensitive and nearly real-time microbial detection from foods. An antibody-based fiber-optic biosensor to detect low levels of Listeria monocytogenes cells following an enrichment step was developed. The principle of the sensor is a sandwich immunoassay where a rabbit polyclonal antibody was first immobilized on polystyrene fiber waveguides through a biotin-streptavidin reaction to capture Listeria cells on the fiber. Capture of cells on the fibers was confirmed by scanning electron microscopy. A cyanine 5-labeled murine monoclonal antibody, C11E9, was used to generate a specific fluorescent signal, which was acquired by launching a 635-nm laser light from an Analyte 2000 and collected by a photodetector at 670 to 710 nm. This immunosensor was specific for L. monocytogenes and showed a significantly higher signal strength than for other Listeria species or other microorganisms, including Escherichia coli, Enterococcus faecalis, Salmonella enterica, Lactobacillus plantarum, Carnobacterium gallinarum, Hafnia alvei, Corynebacterium glutamicum, Enterobacter aerogenes, Pseudomonas aeruginosa, and Serratia marcescens, in pure or in mixed-culture setup. Fiber-optic results could be obtained within 2.5 h of sampling. The sensitivity threshold was about 4.3 x 10(3) CFU/ml for a pure culture of L. monocytogenes grown at 37 degrees C. When L. monocytogenes was mixed with lactic acid bacteria or grown at 10 degrees C with 3.5% NaCl, the detection threshold was 4.1 x 10(4) or 2.8 x 10(7) CFU/ml, respectively. In less than 24 h, this method could detect L. monocytogenes in hot dog or bologna naturally contaminated or artificially inoculated with 10 to 1,000 CFU/g after enrichment in buffered Listeria enrichment broth.

Characterization and performance evaluation of in vivo and in vitro produced monoclonal anti-TNT antibodies for the detection of TNT

In this paper are the experimental results used to characterize four distinct monoclonal anti-TNT antibodies (in vivo and in vitro cloned) for potential use in a field-portable immunosensor. Direct and competitive enzyme-linked immunosorbent assays (ELISA) were performed to determine their affinity for TNT and a fluorescently labeled analog of TNT for use in an immunosensor. Effective concentrations (EC(50)), inhibition concentration (IC(50)) and cross-reactivity measurements to related nitroaromatics (e.g., 2,4,6-trinitrobenzene [TNB], methyl-2,4,6-trinitrophenyl nitramine [tetryl], 2-amino-4,6-dinitrotoluene [2A-4,6-DNT], 2,4-dinitrotoluene [2,4-DNT] and 1,3-dinitrotoluene [1,3-DNT]) were measured. Final characterization of the monoclonal antibodies was based on performance (measured by fluorescence dose response) using a fluorescence-based microcapillary displacement assay. Analytical techniques showed a high degree of affinity for TNT and varying degrees of cross-reactivity with each respective monoclonal antibody. Microcapillary displacement immunoassays with each of the antibodies resulted in detection capabilities at the lowest applied TNT concentration (10 ng/ml).

Detection of 2,4,6-trinitrotoluene in seawater using a reversed-displacement immunosensor

Reported in this study are the experimental design and results of an immunosensor for the detection of the explosive, 2,4,6-trinitrotoluene (TNT) in seawater using a reversed-displacement format. This reversed-displacement immunosensor methodology has successfully measured TNT in seawater by direct injection, eliminating the need for preconcentration or pretreatment of samples. A microcolumn containing an Affi-Gel resin derivatized with a 2,4,6-trinitrobenzene (TNB) moiety and a fluorophore-labeled anti-TNT antibody composed the immunoassay reactive chamber. Fluorophore-labeled anti-TNT antibody was incubated with the modified Affi-Gel resin until binding equilibrium was reached. Under a constant flow, samples containing TNT were introduced into the flow stream displacing the fluorophore-labeled TNT antibody. Limits of detection were 2.5ng/mL or part-per-billion (ppb) for TNT in saline buffer and 25ppb in seawater with an analysis time of 10 min. Two anti-TNT antibodies with differing binding affinities were compared in the reversed-displacement assay format, and a correlation between affinity and detection limits was observed. Furthermore, we have demonstrated that the reversed-displacement format can be used to screen seawater samples containing TNT, remains effective after dozens of cycles, and provides significant fluorescence response before regeneration is required.

Demonstration of four immunoassay formats using the array biosensor

The ability of a fluorescence-based array biosensor to measure and quantify the binding of an antigen to an immobilized antibody has been demonstrated using the four different immunoassay formats: direct, competitive, displacement, and sandwich. A patterned array of antibodies specific for 2,4,6-trinitrotoluene (TNT) immobilized onto the surface of a planar waveguide and used to measure signals from different antigen concentrations simultaneously. For direct, competitive, and displacement assays, which are one-step assays, measurements were obtained in real time. Dose-response curves were calculated for all four assay formats, demonstrating the array biosensor's ability to quantify the amount of antigen present in solution.

Amperometric TNT biosensor based on the oriented immobilization of a nitroreductase maltose binding protein fusion

The preparation and characterization of an amperometric 2,4,6-trinitrotoluene (TNT) biosensor based on the surface immobilization of a maltose binding protein (MBP) nitroreductase (NR) fusion (MBP-NR) onto an electrode modified with an electropolymerized film of N-(3-pyrrol-1-ylpropyl)-4,4'-bipyridine (PPB) are described. The MBP domain of MBP-NR exhibits a high and specific affinity toward electropolymerized films of PPB with the immobilized enzyme retaining virtually all of its enzymatic activity. Under similar conditions, the wild-type NR enzyme (i.e., without the MBP domain) loses most of its enzymatic activity. The kinetics of the catalytic reaction between the biosensor and TNT and 2,4-dinitrotoluene (DNT) were characterized using rotated disk electrode and cyclic voltammetry techniques, and values of 1.4 x 10(4) and 7.1 x 10(4) M(-1) s(-1) were obtained for TNT and DNT, respectively. The apparent Michaelis-Menten constants (KM) for MBP-NR in solution and on the surface, using TNT as substrate, were determined to be 27 and 95 microM, respectively. The corresponding value for "wild-type" NR in solution containing TNT was 78 microM, which is very close to the value obtained for MBP-NR on the surface. The limits of detection for both TNT and DNT were estimated to be 2 microM, and the sensitivities were determined to be 205 and 222 nA/microM, respectively.

A liquid crystal pixel array for signal discrimination in array biosensors

A new optical design uses a liquid crystal pixel array (LCPA) to discriminate multiple fluorescence signals on a two-dimensional biosensor array. The LCPA can selectively control the transmission of fluorescence generated from multiple biosensing elements on a planar waveguide. This device sequentially acquires the fluorescence data from the substrate by making multiple individual measurements of the sensing elements on the waveguide. The biosensing elements are patterned according to the pixel layout of the LCPA and optically aligned so that each electronically driven pixel can either transmit or filter out the fluorescence signal as specified by the user. The primary advantage of this system is that a single detection channel (i.e. photomultiplier tube (PMT)) can be used to measure multiple fluorescence signals from a two-dimensional substrate while the LCPA provides for spatial resolution. We evaluate the performance of the LCPA by testing the optical homogeneity of the liquid crystal pixels and linear dynamic range for transmitting light. The LCPA is also used with well-developed biosensing chemistry modified for this optical format.