Study of retention interactions of solute and stationary phase in the light of the solvation model theory

Quantitative structure-(chromatographic) retention relationships

Since the pioneering works of Kaliszan (R. Kaliszan, Quantitative Structure-Chromatographic Retention Relationships, Wiley, New York, 1987; and R. Kaliszan, Structure and Retention in Chromatography. A Chemometric Approach, Harwood Academic, Amsterdam, 1997) no comprehensive summary is available in the field. Present review covers the period of 1996-August 2006. The sources are grouped according to the special properties of kinds of chromatography: Quantitative structure-retention relationship in gas chromatography, in planar chromatography, in column liquid chromatography, in micellar liquid chromatography, affinity chromatography and quantitative structure enantioselective retention relationships. General tendencies, misleading practice and conclusions, validation of the models, suggestions for future works are summarized for each sub-field. Some straightforward applications are emphasized but standard ones. The sources and the model compounds, descriptors, predicted retention data, modeling methods and indicators of their performance, validation of models, and stationary phases are collected in the tables. Some important conclusions are: Not all physicochemical descriptors correlate with the retention data strongly; the heat of formation is not related to the chromatographic retention. It is not appropriate to give the errors of Kovats indices in percentages. The apparently low values (1-3%) can disorient the reviewers and readers. Contemporary mean interlaboratory reproducibility of Kovats indices are about 5-10 i.u. for standard non polar phases and 10-25 i.u. for standard polar phases. The predictive performance of QSRR models deteriorates as the polarity of GC stationary phase increases. The correlation coefficient alone is not a particularly good indicator for the model performance. Residuals are more useful than plots of measured and calculated values. There is no need to give the retention data in a form of an equation if the numbers of compounds are small. The domain of model applicability of models should be given in all cases.

Revised solute descriptors for characterizing retention properties of open-tubular columns in gas chromatography and their application to a carborane–siloxane copolymer stationary phase

An iteration procedure is used to calculate revised solute descriptors for 103 varied compounds suitable for characterizing the retention properties of stationary phases for gas chromatography using the solvation parameter model. The iteration procedure utilizes a database of retention factors obtained on up to 39 open-tubular columns and up to five temperatures in the range 60-140 degrees C for the 103 solutes. The average of the standard deviation [Sigma(logk(exp)-logk(calc))(2)/(n(c)-1)](0.5) where logk(exp) is the experimental retention factor, logk(calc) the model predicted retention factor, and n(c) the total number of retention factors) on all columns is 0.018 for the revised solute descriptors compared with 0.045 for the original values. When used to characterize the retention properties of six open-tubular columns selected to represent different selectivity groups the revised solute descriptors afford improved values for the multiple correlation coefficient and standard deviations of the system constants, and about a three-fold improvement in the standard error of the estimate compared with the original solute descriptors. The revised solute descriptors were used to model retention on the carborane-siloxane copolymer stationary phase Stx-500. This phase has low cohesion, is weakly electron lone pair repulsive, weakly dipolar/polarizable, and weakly hydrogen-bond basic. It has no hydrogen-bond acidity. Its separation properties are similar to those of the poly(diphenyldimethylsiloxane) stationary phases containing 5% diphenylsiloxane monomer, but it is not selectivity equivalent to these phases, being more dipolar/polarizable and a weaker hydrogen-bond base.

Solvation parameters

An improvement in the characterization and the determination of the solvation parameters allows, not only a better knowledge of solutions, but also of some biological phenomena. In this paper, we test several published data and approaches in the field of solubility and solvation parameters in two ways: (i) the mutual independence of the parameters and (ii) their ability to take into account recently published gas-liquid chromatographic data. From this enquiry it arises that the most suitable published values are those of Abraham concerning 314 solutes. It also arises that the parameters of dispersion and orientation of this published data set are appreciably improved using two simple equations. In addition, a new set of optimized values for 133 solutes is given, by derivation from retention indices in gas-liquid chromatography (GLC) on five selected stationary phases, published by Kováts and co-workers and in the present study. The two sets have a total of 373 defined compounds.

Changes in the order of elution of some organic compounds in high-resolution gas chromatography on polar columns depending on the injection method and water content in the sample

During the GC analysis of apple aroma essence using a capillary column with polar stationary phases, i.e., bonded/crosslinked polyethylene glycol (HP-Innowax) and acid-modified polyethylene glycol (FFAP) the phenomenon of changing the elution order of some compounds was observed ("cross-over phenomenon"). The elution order within two pairs of closely eluting compounds: 2-methylbutyl acetate/pentan-3-ol (internal standard) and trans-2-hexen-1-al/2-methylbutan-1-ol differed between samples introduced onto the column with direct injection and with static headspace method. Experiments carried out on standard solutions of investigated compounds in water-acetone mixtures of gradually reduced water ratio (99:1 to 0:100) proved that changes of elution times leading first to co-elution and subsequently to reversion of elution order of compounds within both pairs depended on the amount of water in the injected sample. The same effect was observed while the amount of water was diminished by reducing the sample volume introduced into the column.

Column selectivity from the perspective of the solvation parameter model

The solvation parameter model is a useful tool for delineating the contribution of defined intermolecular interactions to retention of neutral molecules in separation systems based on a solute equilibrium between a gas, liquid or fluid mobile phase and a liquid or solid stationary phase. The free energy for this process is decomposed into contributions for cavity formation and the set up of intermolecular interactions identified as dispersion, electron lone pair, dipole-type and hydrogen bonding. The relative contribution of these interactions is indicated by a series of system constants determined by the difference of the defined interaction in the two phases. The interpretation of these system constants as a function of experimental factors that affect retention in the chromatographic system provides the connection between relative retention (selectivity) and the control variables for the separation system. To aid in the understanding of these processes we perform an analysis of system constants for gas chromatography, liquid chromatography, supercritical fluid chromatography and micellar electrokinetic chromatography as a function of different experimental variables as a step towards gaining a theoretical understanding of selectivity optimization for method development.

Selectivity assessment of DB-200 and DB-VRX open-tubular capillary columns

The solvation parameter model is used to study the influence of composition and temperature on the selectivity of two poly(siloxane) stationary phases used for open-tubular capillary column gas chromatography. The poly(methyltrifluoropropyldimethylsiloxane) stationary phase, DB-200, has low cohesion, intermediate dipolarity/polarizability, low hydrogen-bond basicity, no hydrogen-bond acidity, and repulsive electron lone pair interactions. The DB-VRX stationary phase has low cohesion, low dipolarity/polarizability, low hydrogen-bond basicity and no hydrogen-bond acidity and no capacity for electron lone pair interactions. The selectivity of the two stationary phases is complementary to those in a database of 11 stationary phase chemistries determined under the same experimental conditions.

Selectivity assessment of popular stationary phases for open-tubular column gas chromatography

The solvation parameter model is used to study the influence of temperature and composition on the selectivity of nine poly(siloxane) and two poly(ethylene glycol) stationary phase chemistries for open-tubular column gas chromatography. A database of system constants for the temperature range 60-140 degrees C was constructed from literature values with additional results determined for HP-50+, DB-210, DB-1701, DB-225 and SP-2340 columns. The general contribution of monomer composition (methyl, phenyl, cyanopropyl, and trifluoropropyl substituents) on the capacity of poly(siloxane) stationary phases for dispersion, electron lone pair, dipole-type and hydrogen-bond interactions is described. The selectivity coverage of the open-tubular column stationary phases is compared with a larger database for packed column stationary phases at a reference temperature of 120 degrees C. The open-tubular column stationary phases provide reasonable coverage of the range of dipole-type and hydrogen-bond base interactions for non-ionic packed column stationary phases. Deficiencies are noted in the coverage of electron lone pair interactions. None of the open-tubular column stationary phases are hydrogen-bond acids. The system constants are shown to change approximately linearly with temperature over the range 60-140 degrees C. The intercepts and slopes of these plots are used to discuss the influence of temperature on stationary phase selectivity.