Determination of phthalates in water samples using polystyrene solid-phase extraction and liquid chromatography quantification

Determination of partition coefficients of phthalic acid esters between polydimethylsiloxane and water and its field application to surface waters

Phthalic acid esters (PAEs) or phthalates are endocrine-disrupting chemicals and among the most frequently detected hydrophobic organic pollutants, which can be gradually released from consumer products into the environment (e.g., water). This study measured the equilibrium partition coefficients for 10 selected PAEs, with a wide range of logarithms of the octanol-water partition coefficient (log K_ow) from 1.60 to 9.37, between poly(dimethylsiloxane) (PDMS) and water (K_PDMSw) using the kinetic permeation method. The desorption rate constant (k_d) and K_PDMSw for each PAEs were calculated from kinetic data. The experimental log K_PDMSw for the PAEs ranges from 0.8 to 5.9, which is linearly correlated with log K_ow values up to 8 from the literature (R² > 0.94); however, it slightly deviated for the PAEs with log K_ow values greater than 8. In addition, K_PDMSw decreased with the temperature and enthalpy for PAEs partitioning in PDMS-water in an exothermic manner. Furthermore, the effects of dissolved organic matter and ionic strength on the partitioning of PAEs in PDMS were investigated. PDMS was used as a passive sampler to determine the aqueous concentration of plasticizers in river surface water. The results of this study can be used to evaluate the bioavailability and risk of phthalates in real environmental samples.

Efficient biodegradation of di-(2-ethylhexyl) phthalate by a novel strain Nocardia asteroides LMB-7 isolated from electronic waste soil

The di-2-ethylhexyl phthalate (DEHP) degrading strain LMB-7 was isolated from electronic waste soil. According to its biophysical/biochemical characteristics and 16S rRNA gene analysis, the strain was identified as Nocardia asteroides. Optimal pH and temperature for DEHP degradation were 8.0 and 30 °C, respectively, and DEHP removal reached 97.11% after cultivation for 24 h at an initial concentration of 400 mg/L. As degradation intermediates, di-butyl phthalates, mono-2-ethylhexyl phthalate and 2-ethylhexanol could be identified, and it could be confirmed that DEHP was completely degraded by strain LMB-7. To our knowledge, this is a new report of DEHP degradation by a strain of Nocardia asteroides, at rates higher than those reported to date. This finding provides a new way for DEHP elimination from environment.

Analysis of Polycyclic Aromatic Hydrocarbons and Phthalate Esters in Soil and Food Grains from the Balkan Peninsula: Implication on DNA Adduct Formation by Aristolochic Acid I and Balkan Endemic Nephropathy

Balkan endemic nephropathy (BEN) is a chronic tubulointerstitial nephropathy affecting residents of rural farming areas in many Balkan countries. Although it is generally believed that BEN is an environmental disease caused by multiple geochemical factors with much attention on aristolochic acids (AAs), its etiology remains controversial. In this study, we tested the hypothesis that environmental contamination and subsequent food contamination by polycyclic aromatic hydrocarbons (PAHs) and phthalate esters are AA toxicity factors and important to BEN development. We identified significantly higher concentrations of phenanthrene, anthracene, diethyl phthalate (DEP), dibutyl phthalate (DBP), and benzyl butyl phthalate (BBP) in both maize and wheat grain samples collected from endemic villages than from nonendemic villages. Other PAHs and phthalate esters were also detected at higher concentrations in the soil samples from endemic villages. Subsequent genotoxicity testing of cultured human kidney cells showed an alarming phenomenon that phenanthrene, DEP, BBP, and DBP can interact synergistically with AAs to form elevated levels of AA-DNA adducts, which are associated with both the nephrotoxicity and carcinogenicity of AAs, further increasing their disease risks. This study provides direct evidence that prolonged coexposure to these environmental contaminants via dietary intake may lead to greater toxicity and accelerated development of BEN.

Magnetic solid-phase extraction based on magnetic carbon particles from coffee grounds for determining phthalic acid esters in plastic bottled water

Newly developed magnetic carbon particles prepared from coffee grounds were used as the sorbent for the magnetic solid-phase extraction of eight phthalic acid esters (PAEs) from plastic bottled water prior to their analysis by GC-MS. The method, which uses coffee-ground particles coated with iron oxide, was validated, and exhibited linearities for the eight PAEs, with coefficients of determination above 0.998 in the 0.005 to 0.1 mg/L concentration range. Limits of detection and limits of quantification of 0.00003 to 0.002 mg/L and 0.0001 to 0.005 mg/L, respectively, were achieved, with recoveries (%) ranging between 77% and 120%, and relative standard deviations for intra- and interday precisions below 16.3% at three fortification levels. No PAE residues were detected when the developed and validated method was applied to 10 real plastic bottled water samples. Taken together, the developed magnetic solid-phase extraction method is a useful tool for monitoring phthalate esters in aqueous samples. PRACTICAL APPLICATION: The development of a new, inexpensive, and efficient magnetic sorption material derived from spent coffee grounds, and its ability to determine phthalate esters in aqueous solutions was described by GC-MS/MS. The developed magnetic solid-phase extraction method is a useful tool for monitoring phthalate esters in aqueous samples.

DEHP Nanodroplets Leached From Polyvinyl Chloride IV Bags Promote Aggregation of IVIG and Activate Complement in Human Serum

Concerns regarding the impact of subvisible particulate impurities on the safety and efficacy of therapeutic protein products have led manufacturers to implement strategies to minimize protein aggregation and particle formation during manufacturing, storage, and shipping. However, once these products are released, manufacturers have limited control over product handling. In this work, we investigated the effect of di(2-ethylhexyl) phthalate (DEHP) nanodroplets generated in polyvinyl chloride (PVC) bags of intravenous (IV) saline on the stability and immunogenicity of IV immunoglobulin (IVIG) formulations. We showed that PVC IV bags containing saline can release DEHP droplets into the solution when agitated or transported using a pneumatic tube transportation system in a clinical setting. We next investigated the effects of emulsified DEHP nanodroplets on IVIG stability and immunogenicity. IVIG adsorbed strongly to DEHP nanodroplets, forming a monolayer. In addition, DEHP nanodroplets accelerated IVIG aggregation in agitated samples. The immunogenicity of DEHP nanodroplets and IVIG aggregates generated in these formulations were evaluated using an in vitro assay of complement activation in human serum. The results suggested DEHP nanodroplets shed from PVC IV bags could reduce protein stability and induce activation of the complement system, potentially contributing to adverse immune responses during the administration of therapeutic proteins.

Optimization of Sample Preparation for Detection of 10 Phthalates in Non-Alcoholic Beverages in Northern Vietnam

A novel method was developed for the sensitive, cheap and fast quantitation of 10 phthalates in non-alcoholic beverages by liquid–liquid extraction (LLE) combined with gas chromatography tandem mass spectrometry (GC-MS/MS). The best results were obtained when n-hexane was used as extraction solvent. A central composite design (CCD) was applied to select the most appreciated operating condition. The method performance was evaluated according to the SANTE/11945/2015 guidelines and was linear in the 0.1 to 200 µg/L range for 10 phthalate compounds, with r² > 0.996 and individual residuals <15%. Repeatability (RSD_r), within-laboratory reproducibility (RSD_wr), and the trueness range were from 2.7 to 9.1%, from 3.4 to 14.3% and from 91.5 to 118.1%, respectively. The limit of detection (LOD) was between 0.5 to 1.0 ng/L and the limit of quantitation (LOQ) was between 1.5 to 3.0 ng/L for all 10 compounds. The developed method was successfully applied to the analysis of non-alcoholic beverages.

Abnormal adsorption and desorption behavior of pharmaceutical drugs on polystyrene microspheres

We report an abnormal adsorption and desorption behavior where a stronger adsorption interaction between polystyrene particles and pharmaceutical drugs results in preferable desorption behavior.

Methods for the Determination of Endocrine-Disrupting Phthalate Esters

Phthalates are endocrine disruptors frequently occurring in the general and industrial environment and in many industrial products. Moreover, they are also suspected of being carcinogenic, teratogenic, and mutagenic, and they show diverse toxicity profiles depending on their structures. The European Union and the United States Environmental Protection Agency (US EPA) have included many phthalates in the list of priority substances with potential endocrine-disrupting action. They are: dimethyl phthalate (DMP), diethyl phthalate (DEP), dibutyl phthalate (DBP), butylbenzyl phthalate (BBP), diethylhexyl phthalate (DEHP), di-iso-nonyl phthalate (DINP), di-iso-decyl phthalate (DIDP), di-n-decyl phthalate (DnDP), and dioctyl phthalate (DOP). There is an ever-increasing demand for new analytical methods suitable for monitoring different phthalates in various environmental, biological, and other matrices. Separation and spectrometric methods are most frequently used. However, modern electroanalytical methods can also play a useful role in this field because of their high sensitivity, reasonable selectivity, easy automation, and miniaturization, and especially low investment and running costs, which makes them suitable for large-scale monitoring. Therefore, this review outlines possibilities and limitations of various analytical methods for determination of endocrine-disruptor phthalate esters in various matrices, including somewhat neglected electroanalytical methods.

Determination of phthalate esters in distillates by ultrasound-vortex-assisted dispersive liquid-liquid micro-extraction (USVADLLME) coupled with gas chromatography/mass spectrometry

A method for the extraction of phthalate esters (PAEs) by Ultrasound-Vortex-Assisted Dispersive Liquid-Liquid Micro-Extraction (USVADLLME) approach was optimised and applied for the first time to a historical series of brandies. These contaminants are widely spread in the environment as a consequence of about half century of use in different fields of applications. The concern about these substances and the recent legal restrictions of China in distillates import need a quick and sensitive method for their quantification. The proposed method, moreover, is environmentally oriented due to the disposal of micro-quantities of solvent required. In fact, sub-ppm-limits of detection were achieved with a solvent volume as low as 160μL. The analysed samples were within the legal limits, except for some very ancient brandies whose contamination was probably due to a PAEs concentration effect as a consequence of long ageing and for the use of plastic pipelines no more operative.

Fast analysis of phthalates in freeze-dried baby foods by ultrasound-vortex-assisted liquid-liquid microextraction coupled with gas chromatography-ion trap/mass spectrometry

This paper is focused on the determination of phthalates (PAEs), compounds "plausibly" endocrine disruptors, in baby food products by means of a method based on ultrasound-vortex-assisted liquid-liquid microextraction coupled with GC-IT/MS (UVALLME-GC-IT/MS). Particularly, the whole procedure allows the determination of six phthalates such as DMP, DEP, DBP, iBcEP, BBP and DEHP. After dissolution of 0.1g product sample and addition of anthracene as Internal Standard, 250μL of n-heptane are used as extraction solvent. The solution, held for 5min on the vortex mixer and for 6min in an ultrasonic bath at 100W for favoring the solvent dispersion and consequently the analyte extraction, is centrifuged at 4000rpm for 30min. About 100μL of heptane are recovered and 1μL is injected into the GC-IT/MS. All the analytical parameters investigated are deeply discussed: under the best conditions, the percentage recoveries range between 96.2 and 109.2% with an RSD ≤10.5% whereas the Limit of Detections (LODs) and the Limit of Quantifications (LOQs) are below 11 and 20ngg^-1, respectively, for all the PAEs except for iBcEP (23 and 43ngg^-1, respectively). The linear dynamic range of this procedure is between 10 and 5000ngg^-1 with R² ≥0.92. The method has been applied to real commercial freeze-dried samples (chicken and turkey meats) available on the Italian pharmaceutical market: three PAEs were preliminary identified, i.e. DEP (14ngg^-1), DBP (11ngg^-1) and DEHP (64ngg^-1).

Phenols, flame retardants and phthalates in water and wastewater - a global problem

Organic pollutants in water and wastewater have been causing serious environmental problems. The arbitrary discharge of wastewater by industries, and handling, use, and disposal constitute a means by which phenols, flame retardants (FRs), phthalates (PAEs) and other toxic organic pollutants enter the ecosystem. Moreover, these organic pollutants are not completely removed during treatment processes and might be degraded into highly toxic derivatives, which has led to their occurrence in the environment. Phenols, FRs and PAEs are thus highly toxic, carcinogenic and mutagenic, and are capable of disrupting the endocrine system. Therefore, investigation to understand the sources, pathways, behavior, toxicity and exposure to phenols, FRs and PAEs in the environment is necessary. Formation of different by-products makes it difficult to compare the efficacy of the treatment processes, most especially when other organic matters are present. Hence, high levels of phenols, FRs and PAEs removal could be attained with in-line combined treatment processes.

Reliable quantification of phthalates in environmental matrices (air, water, sludge, sediment and soil): a review

Because of their widespread application, phthalates or phthalic acid esters (PAEs) are ubiquitous in the environment. Their presence has attracted considerable attention due to their potential impacts on ecosystem functioning and on public health, so their quantification has become a necessity. Various extraction procedures as well as gas/liquid chromatography and mass spectrometry detection techniques are found as suitable for reliable detection of such compounds. However, PAEs are ubiquitous in the laboratory environment including ambient air, reagents, sampling equipment, and various analytical devices, that induces difficult analysis of real samples with a low PAE background. Therefore, accurate PAE analysis in environmental matrices is a challenging task. This paper reviews the extensive literature data on the techniques for PAE quantification in natural media. Sampling, sample extraction/pretreatment and detection for quantifying PAEs in different environmental matrices (air, water, sludge, sediment and soil) have been reviewed and compared. The concept of "green analytical chemistry" for PAE determination is also discussed. Moreover useful information about the material preparation and the procedures of quality control and quality assurance are presented to overcome the problem of sample contamination and these encountered due to matrix effects in order to avoid overestimating PAE concentrations in the environment.

Anionic surfactant micelle-mediated extraction coupled with dispersive magnetic microextraction for the determination of phthalate esters

A novel and easy two-step microextraction technique combining anionic surfactant coacervation phase (CAP) extraction and dispersive microsolid-phase extraction (D-μ-SPE) was developed for the high-performance liquid chromatography-ultraviolet detection to determination of phthalate esters (PEs) in water samples. The method started with the phase separation of sodium dodecylbenzenesulfonic acid (SDBSA) obtained by adding NaCl, whereas the target analytes were extracted in the CAP. The CAP was then retrieved using diatomaceous earth-supported magnetite nanoparticles. The effects of solution acidity, SDBSA, and electrolyte concentration, extraction time, magnetic material quantity, and elution solvent volume were discussed. Under optimal extraction conditions, the extraction recoveries ranged from 48.6 to 84.8%, and relative standard deviations ranged from 3.9 to 5.7% (n = 10). The detection limits ranged from 0.5 to 5.0 ng mL(-1) for the five PEs. The proposed method was used to determine the five PEs in the water samples and recoveries between 85.7 and 105.5%.

Graphene-dispersive solid-phase extraction of phthalate acid esters from environmental water

Graphene is a novel carbon nanomaterial with an ultra-high specific surface area. In this paper, we explored graphene as adsorbent for efficient enrichment of 15 phthalate acid esters (PAEs) under different water matrixes (ultrapure water, river and sea). A simple and inexpensive method of dispersive solid-phase extraction (DSPE) combined with gas chromatography-mass spectrometry (GC-MS) was used and acceptable results were provided for most PAEs with overall average recoveries between 71 and 117%. The extraction conditions such as the amount of graphene, the desorption solvent, adsorption time, desorption time and the solution pH were optimized. Finally, the method was applied for the determination of PAEs in environmental water samples including 9 rivers and 2 seas from 7 areas in China.

Dummy molecularly imprinted solid-phase extraction for selective determination of five phthalate esters in plastic bottled functional beverages

In this paper, a highly selective sample cleanup procedure combing dummy molecular imprinting and solid-phase extraction (DMI-SPE) was developed for the simultaneous isolation and determination of five phthalate esters in plastic bottled beverages. The new imprinted microspheres were synthesized via precipitation polymerization using diisononyl phthalate as a dummy template that showed high selectivity and affinity to the five kinds of phthalate esters and were successfully applied as selective sorbents of DMI-SPE for the simultaneous determination of the phthalate esters from plastic bottled beverages. Good linearity was obtained in a range of 5.0-750.0 μg/L, and the average recoveries of the five phthalate esters at three spiked levels ranged from 84.3 to 96.2% with the relative standard deviations less than 5.49%. The developed extraction protocol eliminated the effect of template leakage on quantitative analysis and could be applied for the determination of phthalate esters in complicated functional beverages products.