Quantitative capillary electrophoretic analysis for calcium and magnesium in sodium–matrix waters

Prediction and understanding system peaks in capillary zone electrophoresis

Introduction of a sample into the separation column (microchip channel) in capillary zone electrophoresis (microchip electrophoresis) will cause a disturbance in the originally uniform composition of the background electrolyte. The disturbance, a system zone, can move in some electrolyte systems along the separation channel and, on reaching the position of the detector, cause a system peak. As shown by the linear theory of electromigration based on linearized continuity equations formulated in matrix form, the mobility of the system zone--the system eigenmobility--can be obtained as the eigenvalue of the matrix. Progress in the theory of electromigration allows us to predict the existence and mobilities of the system zones, even in very complex electrolyte systems consisting of several multivalent weak electrolytes, or in micellar systems (systems with SDS micelles) used for protein sizing in microchips. The theory is implemented in PeakMaster software, which is available as freeware (www.natur.cuni.cz/gas). The linearized theory also predicts background electrolytes having no stationary injection zone (water zone, water gap, water dip, EO zone) or unstable electrolyte systems exhibiting oscillations and creating periodic structures. The oscillating systems have complex system eigenmobilities (eigenvalues of the matrix are complex). This paper reviews the theoretical background of the system peaks (system eigenpeaks) and gives practical hints for their prediction and for preparing background electrolytes not perturbed by the occurrence of system peaks and by excessive peak broadening.

System zones in capillary zone electrophoresis

When working with capillary zone electrophoresis (CZE), the analyst has to be aware that the separation system is not homogeneous anymore as soon as a sample is brought into the background electrolyte (BGE). Upon injection, the analyte creates a disturbance in the concentration of the BGE, and the system retains a kind of memory for this inhomogeneity, which is propagated with time and leads to so-called system zones (or system eigenzones) migrating in an electric field with a certain eigenmobility. If recordable by the detector, they appear in the electropherogram as system peaks (or system eigenpeaks). However, although their appearance can not be forecasted and explained easily, they are inherent for the separation system. The progress in the theory of electromigration (accompanied by development of computer software) allows to treat the phenomenon of system zones and system peaks now also in very complex BGE systems, consisting of several multivalent weak electrolytes, and at all pH ranges. It also allows to predict the existence of BGEs having no stationary injection zone (or water zone, EO zone, gap, dip). Our paper reviews the theoretical background of the origin of the system zones (system peaks, system eigenpeaks), discusses the validity of the Kohlrausch regulating function, and gives practical hints for preparing BGEs with good separation ability not deteriorated by the occurrence of system peaks and by excessive peak-broadening.

Determination of trace metals by capillary electrophoresis

A new analytical procedure is developed using a strong complexing agent, 1,10-phenanthroline (Phen), for direct UV detection of Zn, Mn, Cu, Co, Cd, and Fe at microg/L concentrations in environmental water samples. The metal chelates formed showed different electrophoretic mobilities and solved the comigration problem for capillary electrophoresis (CE) separation of free metal ions. To obtain stable metal-Phen chelates during the capillary zone electrophoresis (CZE) run, both pre-column and on-column complexation are required and threefold excess of Phen over metal ions should be added to the sample. The optimized background electrolyte (BGE) consists of 30 mM hydroxylamine hydrochloride and 0.1% methanol at pH 3.6. Under hydrodynamic sampling, CE run at + 20 kV in 65 cm x 0.05 mm ID fused-silica column with detection at 265 nm, baseline separation, satisfactory working ranges (10 microg/L to 5.5 mg/L), sensitive detection limits (1-3 microg/L), good repeatability for migration times (relative standard deviation, RSD 0.36-0.81%, n = 5), peak area (RSD 3.2-4.2%, n = 5) and peak height (RSD 3.2-4.5%, n = 5) were obtained for the metal cations investigated. The reliability of the method was established by parallel determination using the inductively coupled plasma-atomic emission spectrometry (ICP-AES) method giving results within statistical variation. The procedure developed is shown to provide a quick, sensitive, precise, and economic method for simultaneous determination of metal cations that can form stable chelates with Phen.

Recent progress in capillary electrophoresis of metal ions

Advances in the fundamental studies and methodology of capillary electrophoresis (CE) as applied to metal ion analysis over the last two years are reviewed, with the objective of providing the interested reader with a state-of-the-art picture of technique's potentialities in the area. In particular, novel strategies for separation selectivity control and CE system innovations designed to enhance the detection sensitivity are described. In addition, a brief overview of the primary metal analytes and samples for which the technique appears to be best suited is given. The current limitations of the technique regarding most of all the implementation for routine use are considered along with the approaches on how they could be addressed. Finally, some pointers as to the likely trends in the future research are discussed.