Immobilization of oligonucleotides on poly(ethylene glycol) brush-coated Si surfaces

Modeling Effects of Surface Properties and Probe Density for Nanoscale Biosensor Design: A Case Study of DNA Hybridization near Surfaces

Electrochemical biosensors have extremely robust applications while offering ease of preparation, miniaturization, and tunability. By adjusting the arrangement and properties of immobilized probes on the sensor surface to optimize target-probe association, one can design highly sensitive and efficient sensors. In electrochemical nucleic acid biosensors, a self-assembled monolayer (SAM) is widely used as a tunable surface with inserted DNA or RNA probes to detect target sequences. The effects of inhomogeneous probe distribution across surfaces are difficult to study experimentally due to inadequate resolution. Regions of high probe density may inhibit hybridization with targets, and the magnitude of the effect may vary depending on the hybridization mechanism on a given surface. Another fundamental question concerns diffusion and hybridization of DNA taking place on surfaces and whether it speeds up or hinders molecular recognition. We used all-atom Brownian dynamics simulations to help answer these questions by simulating the hybridization process of single-stranded DNA (ssDNA) targets with a ssDNA probe on polar, nonpolar, and anionic SAMs at three different probe surface densities. Moreover, we simulated three tightly packed probe clusters by modeling clusters with different interprobe spacing on two different surfaces. Our results indicate that hybridization efficiency depends strongly on finding a balance that allows attractive forces to steer target DNA toward probes without anchoring it to the surface. Furthermore, we found that the hybridization rate becomes severely hindered when interprobe spacing is less than or equal to the target DNA length, proving the need for a careful design to both enhance target-probe association and avoid steric hindrance. We developed a general kinetic model to predict hybridization times and found that it works accurately for typical probe densities. These findings elucidate basic features of nanoscale biosensors, which can aid in rational design efforts and help explain trends in experimental hybridization rates at different probe densities.

Functionalization of Metal Surface via Thiol-Ene Click Chemistry: Synthesis, Adsorption Behavior, and Postfunctionalization of a Catechol- and Allyl-Containing Copolymer

Surface functionalization tailors the interfacial properties without impacts on the mechanical strength, which is beneficial for industry and daily applications of various metallic materials. Herein, a two-step surface functionalization strategy, (1) catechol-mediated immobilization of clickable agent and (2) postfunctionalization based on thiol-ene click reaction, is achieved using a copolymer, namely poly[2-(methacryloyloxy)ethylundec-10-enoate]-co-(N-(3,4-dihydroxyphenethyl) methacrylamide) [P(MEUE-co-DPMAm)]. To reduce the potential side reactions of allylic double bonds in allyl methacrylate during the polymerization, the MEUE are designed and synthesized with better control over the polymer chain growth. The surface functionalization via the two-step method is demonstrated using various thiols, e.g., hydrophobic, hydrophilic, and polymeric thiols under room conditions. Additionally, the hydrophobic-thiol-functionalized anodic aluminum oxide is found to be a candidate for the oil/water separation with a separation efficiency of ∼99.2%. This surface modifier provides practical insights into the further design of functional materials.

DNA hairpin stabilization on a hydrophobic surface

DNA hybridization in the vicinity of surfaces is a fundamental process for self-assembled nanoarrays, nanocrystal superlattices, and biosensors. It is widely recognized that solid surfaces alter molecular forces governing hybridization relative to a bulk solution, and these effects can either favor or disfavor the hybridized state depending on the specific sequence and surface. Results presented here provide new insights into the dynamics of DNA hairpin-coil conformational transitions in the vicinity of hydrophilic oligo(ethylene glycol) (OEG) and hydrophobic trimethylsilane (TMS) surfaces. Single-molecule methods are used to observe the forward and reverse hybridization hairpin-coil transition of adsorbed species while simultaneously measuring molecular surface diffusion in order to gain insight into surface interactions with individual DNA bases. At least 35 000 individual molecular trajectories are observed on each type of surface. It is found that unfolding slows and the folding rate increases on TMS relative to OEG, despite stronger attractions between TMS and unpaired nucleobases. These rate differences lead to near-complete hairpin formation on hydrophobic TMS and significant unfolding on hydrophilic OEG, resulting in the surprising conclusion that hydrophobic surface coatings are preferable for nanotechnology applications that rely on DNA hybridization near surfaces.

Efficient self-assembly of DNA-functionalized fluorophores and gold nanoparticles with DNA functionalized silicon surfaces: the effect of oligomer spacers

Although strategies for the immobilization of DNA oligonucleotides onto surfaces for bioanalytical and top-down bio-inspired nanobiofabrication approaches are well developed, the effect of introducing spacer molecules between the surface and the DNA oligonucleotide for the hybridization of nanoparticle–DNA conjugates has not been previously assessed in a quantitative manner. The hybridization efficiency of DNA oligonucleotides end-labelled with gold nanoparticles (1.4 or 10 nm diameter) with DNA sequences conjugated to silicon surfaces via hexaethylene glycol phosphate diester oligomer spacers (0, 1, 2, 6 oligomers) was found to be independent of spacer length. To quantify both the density of DNA strands attached to the surfaces and hybridization with the surface-attached DNA, new methodologies have been developed. Firstly, a simple approach based on fluorescence has been developed for determination of the immobilization density of DNA oligonucleotides. Secondly, an approach using mass spectrometry has been created to establish (i) the mean number of DNA oligonucleotides attached to the gold nanoparticles and (ii) the hybridization density of nanoparticle–oligonucleotide conjugates with the silicon surface–attached complementary sequence. These methods and results will be useful for application with nanosensors, the self-assembly of nanoelectronic devices and the attachment of nanoparticles to biomolecules for single-molecule biophysical studies.

New protocol for oligonucleotide microarray fabrication using SU-8-coated glass microslides

Microarray technology has become an important tool for detection and analysis of nucleic acid targets. Immobilization of modified and unmodified oligonucleotides on epoxy-functionalized glass surfaces is often used in microarray fabrication. Here, we demonstrate a protocol that employs coating of SU-8 (glycidyl ether of bisphenol A) onto glass microslides to obtain high density of epoxy functions for efficient immobilization of aminoalkyl-, thiophosphoryl-, and phosphorylated oligonucleotides with uniform spot morphology. The resulting microarrays exhibited high immobilization (∼65%) and hybridization efficiency (30-36%) and were sufficiently stable over a range of temperature and pH conditions. The prominent feature of the protocol is that spots can be visualized distinctly at 0.05 μM probe (a 20-mer oligonucleotide) concentration. The constructed microarrays were subsequently used for detection of base mismatches and bacterial diseases (meningitis and typhoid).

Evaluation of non-specific binding suppression schemes for neutravidin and alkaline phosphatase at the surface of reticulated vitreous carbon electrodes

Non-specific binding (NSB) of high-molecular-weight proteins onto electrode surfaces can complicate the application of electroanalytical techniques to clinical and environmental research, particularly in biosensor applications. We present herein various strategies to modify the surface of reticulated vitreous carbon (RVC) electrodes to suppress non-specific binding of biomolecules onto its surface. Non-specific binding and specific binding (SB) of two enzyme conjugates, neutravidin-alkaline phosphatase (NA-ALP) and biotinylated alkaline phosphatase (B-ALP), and also neutravidin itself, were studied using hydroquinone diphosphate (HQDP) as an enzyme substrate for ALP inside the pores of RVC electrodes that had been subjected to various modification schemes. The extent of NSB and SB of these biomolecules inside RVC pores was assessed by measuring the initial rate of generation of an electroactive product, hydroquinone (HQ), of the enzyme-catalyzed reaction, using linear scan voltammetry (LSV) for HQ detection. Electrodes functionalized with phenylacetic acid and poly(ethylene glycol) (PEG) showed low NSB and high SB (when biotin capture ligands were included in the modification scheme) in comparison with unmodified electrodes and RVC electrodes modified in other ways. A simple sandwich bioassay for neutravidin was performed on the RVC electrode with the lowest NSB. A concentration detection limit of 52+/-2 ng mL(-1) and an absolute detection limit of 5.2+/-0.2 ng were achieved for neutravidin when this assay was performed using a 100 microL sample size.

Polymer supported synthesis of aminooxyalkylated oligonucleotides, and some applications in the fabrication of microarrays

A new protocol has been described for solid phase preparation of 3'- and 5'-aminooxylalkylated oligonucleotides using commercially available reagents. This involves attachment of linker 4 either with an LCAA-CPG support via succinoylation followed by synthesis (3'-aminooxyalkylated oligomers) or formation of its phosphoramidite 6 followed by coupling with desired oligomer (for generating 5'-aminooxyalkylated oligomers). Both the routes produced modified oligonucleotides in sufficiently high yields and purity (on HPLC) via conventional oligonucleotide synthesis on an automated synthesizer and deprotection step using aqueous ammonia (16 h, 60 degrees C). Aminooxyalkylated oligonucleotides were used to construct microarrays on glass surface (biochips). The performance of the biochips was evaluated by immobilizing modified oligonucleotides on epoxylated glass microslides under different sets of conditions with respect to pH, temperature and time. Further, the constructed microarrays were successfully used for detection of nucleotide mismatches and bacterial typhoid.

Comparison of the nonspecific binding of DNA-conjugated gold nanoparticles between polymeric and monomeric self-assembled monolayers

The nonspecific binding of DNA-conjugated gold nanoparticles (AuNPs) to solid surfaces is more difficult to control than that of DNA molecules due to the more attractive interactions from the large number of DNA molecules per AuNP. This paper reports that the polymeric self-assembled monolayers (SAMs) formed on indium-tin oxide (ITO) electrodes significantly inhibit the nonspecific binding of DNA-conjugated AuNPs. The random copolymers used to prepare the polymeric SAMs consist of three functional parts: an ITO-reactive silane group, a DNA-blocking poly(ethylene glycol) (PEG) group, and an amine-reactive N-acryloxysuccinimide group. In order to compare the polymeric SAMs with various monomeric SAMs, the relative nonspecific binding of the DNA-conjugated AuNPs to the ITO electrodes modified with (3-aminopropyl)triethoxysilane (APTES), 3-aminopropylphosphonic acid, 3-phosphonopropionic acid, or 11-phosphonoundecanoic acid is examined by measuring the electrocatalytic anodic current of hydrazine caused by the nonspecifically absorbed AuNPs and by counting the AuNPs adsorbed onto modified ITO electrodes. Carboxylic-acid-terminated and amine-terminated monomeric SAMs cause high levels of nonspecific binding of DNA-conjugated AuNPs. The monomeric SAM modified with the carboxylic-acid-terminated poly(amidoamine) dendrimer shows low levels of nonspecific binding (2.0% nonspecific binding relative to APTES) due to the high surface density of the negative charge. The simply prepared polymeric SAM produces the lowest level of nonspecific binding (0.8% nonspecific binding relative to APTES), resulting from the combined effect of (i) DNA-blocking PEG and carboxylic acid groups and (ii) dense polymeric SAMs. Therefore, thin and dense polymeric SAMs may be effective in electrochemical detection and easy DNA immobilization along with low levels of nonspecific binding.

Construction of oligonucleotide microarrays (biochip) using heterobifunctional reagents

A number of hetero- and homobifunctional reagents have been reported to immobilize biomolecules on a variety of supports. However, efforts are on to search for a method, which is relatively simple, involving minimum of steps, cost effective, easy to reproduce, and that produces stable oligonucleotide arrays. Two new reagents, viz., [N-(2-trifluoroethanesulfonatoethyl)-N-(methyl)-triethoxysilylpropyl-3-amine], and [N-(3-trifluoroethanesulfonyloxypropyl)anthraquinone-2-carboxamide] have been designed considering the above points. These reagents contain different functional groups at their two ends. In [N-(2-trifluoroethanesulfonatoethyl)-N-(methyl)-triethoxysilylpropyl-3-amine], one end (triethoxysilyl) is capable of binding to the virgin glass surface and the other one consists of trifluoroethanesulfonate (tresyl) function specific toward aminoalkyl and mercaptoalkyl functionalities, which are easy to introduce at the 3'- or 5'-end of oligonucleotides. Likewise, in [N-(3-trifluoroethanesulfonyloxypropyl)anthraquinone-2-carboxamide], one end consists of photoactivatable moiety (anthraquinone) capable of reacting to a C-H containing surface and the tresyl function at the other end reacts specifically with aminoalkyl and mercaptoalkyl functionalities in modified oligonucleotides. These reagents have successfully been utilized to construct a number of oligonucleotide arrays and subsequently used for the detection of mismatches.

Block copolymer-oligonucleotide conjugates for genotyping on microarrays

Polymer-oligonucleotide conjugates were synthesized from the amphiphilic block copolymer poly(tert-butylacrylamide-b-(N-acryloylmorpholine-co-N-acryloxysuccinimide)) using an original solid-phase DNA synthesis strategy. This method provided conjugates highly functionalized with oligonucleotides throughout the polymer chain. After purification, block copolymer-oligonucleotide conjugates were spotted on a multidetection microarray system developed by Apibio using a standard nanodroplet piezo inkjet spotting technique to develop the oligosorbent assay (OLISA). Two genotyping models (HLA-DQB1 and platelet glycoproteins [GPs]), which are particularly difficult to study with standard systems, were evaluated. For both models, block copolymer-oligonucleotide conjugates used as capture probes amplified the responses of in vitro diagnostic assays. The detection limit reached by using conjugates was estimated at 15 pM for a 219-bp DNA target (HLA-DQB1 model). Moreover, single nucleotide polymorphism was detected in the platelet GPs genotyping model. The use of polymer conjugates led to a significant improvement in both sensitivity and specificity of standard hybridization assays even when applied to complex biological models.

Protein repellant silicone surfaces by covalent immobilization of poly(ethylene oxide)

Polydimethylsiloxane elastomers were surface modified with passivating polyethylene oxide (PEO) polymers of different molecular weights, both monofunctional and bifunctional. Following the introduction of Si-H groups on the surfaces by acid-catalyzed equilibration in the presence of polymethylhydrosiloxane, the PEO was linked by platinum-catalyzed hydrosilylation. ATR-FTIR, X-ray photoelectron spectroscopy (XPS) and water contact angle results confirmed that the PEO was successfully grafted to the silicone rubber. Atomic force microscopy and XPS suggested that surface coverage with PEO was very high on the modified surfaces but not complete. The protein-resistant properties of the PEO-modified surfaces were demonstrated by measuring the adsorption of fibrinogen from both buffer and plasma. Fibrinogen adsorption from buffer to the PEO-modified surfaces was reduced by more than 90% compared with controls.

Patterning protein molecules on poly(ethylene glycol) coated Si(111)

We demonstrate spatially localized immobilization of protein molecules on high-density poly(ethylene glycol) (PEG) coated Si(111). Patterns of HO- and CH3O-terminated PEG regions are formed on silicon surfaces based on soft lithography techniques and an efficient reaction between alcohol functional groups and chlorine-terminated silicon. Activation of the HO-terminated PEG brush is achieved via either partial oxidation to form aldehyde groups or via attachment of efficient leaving groups. Protein molecules are covalently immobilized to these activated regions on the PEG/Si surface.

Invasive cleavage reactions on DNA-modified diamond surfaces

Recently developed DNA-modified diamond surfaces exhibit excellent chemical stability to high-temperature incubations in biological buffers. The stability of these surfaces is substantially greater than that of gold or silicon surfaces, using similar surface attachment chemistry. The DNA molecules attached to the diamond surfaces are accessible to enzymes and can be modified in surface enzymatic reactions. An important application of these surfaces is for surface invasive cleavage reactions, in which target DNA strands added to the solution may result in specific cleavage of surface-bound probe oligonucleotides, permitting analysis of single nucleotide polymorphisms (SNPs). Our previous work demonstrated the feasibility of performing such cleavage reactions on planar gold surfaces using PCR-amplified human genomic DNA as target. The sensitivity of detection in this earlier work was substantially limited by a lack of stability of the gold surface employed. In the present work, detection sensitivity is improved by a factor of approximately 100 (100 amole of DNA target compared with 10 fmole in the earlier work) by replacing the DNA-modified gold surface with a more stable DNA-modified diamond surface.