A Fourier transform infrared spectroscopic study of the interaction of alkaline earth cations with the negatively charged phospholipid 1, 2-dimyristoyl-sn-glycero-3-phosphoglycerol

Extraction and characterization of exosomes from the exhaled breath condensate and sputum of lung cancer patients and vulnerable tobacco consumers-potential noninvasive diagnostic biomarker source

Noninvasive sample sources of exosomes, such as exhaled breath and sputum, which are in close proximity to the tumor microenvironment and may contain biomarkers indicative of lung cancer, are far more permissive than invasive sample sources for biomarker screening. Standardized exosome extraction and characterization approaches for low-volume noninvasive samples are critically needed. We isolated and characterized exhaled breath condensate (EBC) and sputum exosomes from healthy nonsmokers (n= 30), tobacco smokers (n= 30), and lung cancer patients (n= 40) and correlated the findings with invasive sample sources. EBC samples were collected by using commercially available R-Tubes. To collect sputum samples the participants were directed to take deep breaths, hold their breath, and cough in a collection container. Dynamic light scattering, nanoparticle tracking analysis, and transmission electron microscopy were used to evaluate the exosome morphology. Protein isolation, western blotting, exosome quantification via EXOCET, and Fourier transform infrared spectroscopy were performed for molecular characterization. Exosomes were successfully isolated from EBC and sputum samples, and their yields were adequate and sufficiently pure for subsequent downstream processing and characterization. The exosomes were confirmed based on their size, shape, and surface marker expression. Remarkably, cancer exosomes were the largest in size not only in the plasma subgroups, but also in the EBC (p < 0.05) and sputum (p= 0.0036) subgroups, according to our findings. A significant difference in exosome concentrations were observed between the control sub-groups (p < 0.05). Our research confirmed that exosomes can be extracted from noninvasive sources, such as EBC and sputum, to investigate lung cancer diagnostic biomarkers for research, clinical, and early detection in smokers.

Investigation of the deactivation and regeneration of an Fe2O3/Al2O3•SiO2 catalyst used in catalytic ozonation of coal chemical industry wastewater

Catalyst deactivation is an ongoing concern for industrial application of catalytic ozonation processes. In this study, we systematically investigated the performance of a catalytic ozonation process employing Fe₂O₃/Al₂O₃•SiO₂ catalyst for the treatment of coal chemical industry (CCI) wastewater using pilot-scale and laboratory-scale systems. Our results show that the activity of the Fe₂O₃/Al₂O₃•SiO₂ catalyst for organic contaminant removal deteriorated over time due to formation of a dense and thin carbonaceous layer on the Fe₂O₃ catalyst surface. EPR and fluorescence imaging analysis confirm that the passivation layer essentially inhibited the O₃-catalyst interaction thereby minimizing formation of surficial ^•OH and associated oxidation of organic contaminants on the catalyst surface. Calcination was demonstrated to be effective in restoring the activity of the catalyst since the carbonaceous layer could be efficiently combusted during calcination to re-establish the surficial ^•OH-mediated oxidation process. The combustion of the carbonaceous layer and restoration of the Fe layer on the surface on calcination was confirmed based on SEM-EDX, FTIR and thermogravimetric analysis. Cost analysis indicates that regeneration using calcination is economically viable compared to catalyst replacement. The results of this study are expected to pave the way for developing appropriate regeneration techniques for deactivated catalysts and optimising the catalyst synthesis procedure.

Localized Delivery of Bioactives using Structured Liposomal Gels

Liposomes have gained a lot of interest for drug delivery applications, and some of these preparations have been commercialized. These are formulated with biocompatible components and can be used for delivering a wide range of payloads differing in aqueous solubility and molecular weight. Liposome-based delivery approaches are limited mainly by two factors: (a) poor dispersion stability, and (b) pre-mature leakage of payloads. In this review, we have discussed the stabilization of liposomal vesicles by their entrapment in hydrogels. Studies reveal that such hydrogels can maintain the structural integrity of liposomes. Release of liposomes from the hydrogel network can be modulated through careful screening of matrix former and degree of its cross-linking. Accordingly, we have reviewed the approaches of stabilizing liposomal vesicles through entrapment in hydrogels. Application of liposome-embedded hydrogels has been reviewed in context of localized drug delivery. Our discussion is focussed on the delivery of bioactives to the skin. Such an approach appears alluring from the standpoint of minimizing the undesirable distribution of payload(s) the systemic circulation and off-target sites.

Interaction mechanism of chitosan oligomers in pure water with cell membrane models studied by SFG vibrational spectroscopy

Chitosan is a versatile and biocompatible cationic antimicrobial polymer obtained from sustainable sources that is effective against a wide range of microorganisms. Although it is soluble only at low pH, chitosan oligomers (ChitO) are soluble in pure water and thus more appropriate for antibacterial applications. Although there is a vast literature on chitosan's antimicrobial activity, the molecular details of its interaction with biomembranes remain unclear. Here we investigate these molecular interactions by resorting to phospholipid Langmuir films (zwitterionic DPPC and anionic DPPG) as simplified membrane models (for mammalian and bacterial membranes, respectively), and using SFG vibrational spectroscopy to probe lipid tail conformation, headgroup dynamics and interfacial water orientation. For comparison, we also investigate the interactions of another simple cationic antimicrobial polyelectrolyte, poly(allylamine) hydrochloride - PAH. By forming the lipid films over the polyelectrolyte solutions, we found that both have only a very small interaction with DPPC, but PAH adsorption is able to invert the interfacial water orientation (membrane potential). This might explain why ChitO is compatible with mammalian cells, while PAH is toxic. In contrast, their interaction with DPPG films is much stronger, even more so for ChitO, with both insertion within the lipid film and interaction with the oppositely charged headgroups. Again, PAH adsorption inverts the membrane potential, while ChitO does not. Finally, ChitO interaction with DPPG is weaker if the antimicrobial is injected underneath a pre-assembled Langmuir film, and its interaction mode depends on the time interval between end of film compression and ChitO injection. These differences between ChitO and PAH effects on the model membranes highlight the importance of molecular structure and intermolecular interactions for their bioactivity, and therefore this study may provide insights for the rational design of more effective antimicrobial molecules.

Solution Structures of Anionic-Amphoteric Surfactant Mixtures near the Two-Phase Region at Fixed pH

We examine the solution structures in a mixed surfactant system of sodium dodecyl sulfate (SDS) and N,N-dimethyldodecylamine N-oxide (DDAO) in water, on both sides of the two-phase boundary, employing dynamic light scattering, small-angle neutron scattering, and Fourier transform infrared spectroscopy. The precipitate phase boundary was accessed by lowering pH to 8, from its floating pH 9.5 value, and was experimentally approached from the monomeric and micellar regions in three ways: at fixed DDAO or SDS concentrations and at a fixed (70:30) SDS:DDAO molar ratio. We characterize the size, shape, and interactions of micelles, which elongate approaching the boundary, leading to the formation of disk-like aggregates within the biphasic region, coexisting with micelles and monomers. Our data, from both monomeric and micellar solutions, indicate that the two phase structures formed are largely pathway-independent, with dimensions influenced by both pH and mixed surfactant composition. Precipitation occurs at intermediate stoichiometries with a similar SDS:DDAO ratio, whereas asymmetric stoichiometries form a re-entrant transition, returning to the mixed micelle phase. Overall, our findings demonstrate the effect of stoichiometry and solution pH on the synergistic interaction of mixed surfactants and their impact on phase equilibrium and associated micellar and two-phase structures.

The Electrostatic Basis of Diacylglycerol Pyrophosphate—Protein Interaction

Diacylglycerol pyrophosphate (DGPP) is an anionic phospholipid formed in plants, yeast, and parasites under multiple stress stimuli. It is synthesized by the phosphorylation action of phosphatidic acid (PA) kinase on phosphatidic acid, a signaling lipid with multifunctional properties. PA functions in the membrane through the interaction of its negatively charged phosphomonoester headgroup with positively charged proteins and ions. DGPP, like PA, can interact electrostatically via the electrostatic-hydrogen bond switch mechanism but differs from PA in its overall charge and shape. The formation of DGPP from PA alters the physicochemical properties as well as the structural dynamics of the membrane. This potentially impacts the molecular and ionic binding of cationic proteins and ions with the DGPP enriched membrane. However, the results of these important interactions in the stress response and in DGPP’s overall intracellular function is unknown. Here, using ³¹P MAS NMR, we analyze the effect of the interaction of low DGPP concentrations in model membranes with the peptides KALP23 and WALP23, which are flanked by positively charged Lysine and neutral Tryptophan residues, respectively. Our results show a significant effect of KALP23 on the charge of DGPP as compared to WALP23. There was, however, no significant effect on the charge of the phosphomonoester of DGPP due to the interaction with positively charged lipids, dioleoyl trimethylammonium propane (DOTAP) and dioleoyl ethyl-phosphatidylcholine (EtPC). Divalent calcium and magnesium cations induce deprotonation of the DGPP headgroup but showed no noticeable differences on DGPP’s charge. Our results lead to a novel model for DGPP—protein interaction.

P-enriched hydrochar for soil remediation: Synthesis, characterization, and lead stabilization

One-step synthesis of multifunctional materials using biomass waste for environmental remediation is a current research hotspot. In this study, a novel P-enriched hydrochar was obtained by co-hydrothermal treatment of biomass (bamboo or hickory) with concentrated H₃PO₄ (biomass: H₃PO₄ = 1:4) at 200 °C for 7 h. The characteristics of the P-enriched hydrochar were determined and its effect on the stabilization of Pb in soils was investigated. Compared to pristine hydrochar, the weight yield of the P-enriched hydrochar was greater (by over 2 times). This was due to the enrichment of P (over 20% by weight), as the C, N, and H weight content was reduced. Moreover, the aromaticity, thermal stability, and surface functionality of P-enriched hydrochar were all higher than that of pristine hydrochar. Addition of the pristine hydrochar to a simulated 1300 mg·kg^-1 Pb-contaminated soil at 3% (w/w) resulted in a 20%-40% reduction in leached Pb only after 4 weeks, compared to the control without hydrochar amendment. However, addition of the P-enriched hydrochar to the spiked Pb-contaminated soil reduced Pb leaching by about 60% after only 1 week and about 90% after 3 weeks. Besides, using a real Pb-contaminated soil (149,000 mg·kg^-1 Pb), P-enriched hydrochar addition at 5% (w/w) resulted in a 100% decrease in Pb leaching in the first week and maintained leached Pb levels at <2 mg L^-1, meeting U.S.-E.P.A. standards. Thus, P-enriched hydrochar stabilized Pb in both simulated and real Pb-contaminated soil quickly and efficiently. Hence, the potential of one-step co-hydrothermal carbonization of biomass with H₃PO₄ to produce a novel and sustainable P-enriched hydrochar with properties suitable for environmental remediation of cationic metals.

Characterisation of α-amylase inhibitors in marigold plants via bioassay-guided high-performance thin-layer chromatography and attenuated total reflectance-Fourier transform infrared spectroscopy

A high-performance thin-layer chromatography with microchemical derivatization and bioassay guided detection was used for bioanalytical profiling of selected marigold plant extracts. Anisaldehyde/sulfuric acid reagent and thymol/sulfuric acid reagent were used to visualize separated components on the chromatograms. Antioxidant activity and α-amylase inhibition were assessed with 2 bioassays, DPPH assay to detect free radical scavengers and starch-iodineassay method to detect compounds that inhibit α-amylase. The highest antioxidant activity of 10.12 μg of gallic acid equivalents (GAE) per 20 µL of extract was measured in extract from Tagetes flowers and the lowest in the extract from Calendula leaves with 5.10 μg of GAE. Multiple zones of α-amylase inhibition were detected. A detailed analysis of the ATR-FTIR spectra from the bands at RF = 0.24 suggest that faradiol esters and saturated fatty acids esters, palmitic acid, myristic acid, and lauric acid are responsible for α-amylase inhibition, unsaturated fatty acids for the band at RF = 0.51 and phytoecdysteroids for the band at RF = 0.53.

DNA-Mediated Stack Formation of Nanodiscs

Membrane-scaffolding proteins (MSPs) derived from apolipoprotein A-1 have become a versatile tool in generating nano-sized discoidal membrane mimetics (nanodiscs) for membrane protein research. Recent efforts have aimed at exploiting their controlled lipid protein ratio and size distribution to arrange membrane proteins in regular supramolecular structures for diffraction studies. Thereby, direct membrane protein crystallization, which has remained the limiting factor in structure determination of membrane proteins, would be circumvented. We describe here the formation of multimers of membrane-scaffolding protein MSP1D1-bounded nanodiscs using the thiol reactivity of engineered cysteines. The mutated positions N42 and K163 in MSP1D1 were chosen to support chemical modification as evidenced by fluorescent labeling with pyrene. Minimal interference with the nanodisc formation and structure was demonstrated by circular dichroism spectroscopy, differential light scattering and size exclusion chromatography. The direct disulphide bond formation of nanodiscs formed by the MSP1D1_N42C variant led to dimers and trimers with low yield. In contrast, transmission electron microscopy revealed that the attachment of oligonucleotides to the engineered cysteines of MSP1D1 allowed the growth of submicron-sized tracts of stacked nanodiscs through the hybridization of nanodisc populations carrying complementary strands and a flexible spacer.

Phospholipid-induced silk fibroin hydrogels and their potential as cell carriers for tissue regeneration

Silk fibroin (SF) hydrogels can be obtained via self-assembly, but this process takes several days or weeks, being unfeasible to produce cell carrier hydrogels. In this work, a phospholipid, namely, 1,2-dimyristoyl-sn-glycero-3-phospho-(1'-rac-glycerol) sodium salt (DMPG), was used to induce and accelerate the gelation process of SF solutions. Due to the amphipathic nature and negative charge of DMPG, electrostatic and hydrophobic interactions between the phospholipids and SF chains will occur, inducing the structural transition of SF chains to the beta sheet and consequently a rapid gel formation is observed (less than 50 min). Moreover, the gelation time can be controlled by varying the lipid concentration. To assess the potential of the hydrogels as cell carriers, several mammalian cell lines, including L929, NIH/3T3, SaOS-2, and CaSki, were encapsulated into the hydrogel. The silk-based hydrogels supported the normal growth of fibroblasts, corroborating their cytocompatibility. Interestingly, an inhibition in the growth of cancer-derived cell lines was observed. Therefore, DMPG-induced SF hydrogels can be successfully used as a 3D platform for in situ cell encapsulation, opening promising opportunities in biomedical applications, such as in cell therapies and tissue regeneration.

Interaction between the barley allelochemical compounds gramine and hordenine and artificial lipid bilayers mimicking the plant plasma membrane

Some plants affect the development of neighbouring plants by releasing secondary metabolites into their environment. This phenomenon is known as allelopathy and is a potential tool for weed management within the framework of sustainable agriculture. While many studies have investigated the mode of action of various allelochemicals (molecules emitted by allelopathic plants), little attention has been paid to their initial contact with the plant plasma membrane (PPM). In this paper, this key step is explored for two alkaloids, gramine and hordenine, that are allelochemicals from barley. Using in vitro bioassays, we first showed that gramine has a greater toxicity than hordenine towards a weed commonly found in northern countries (Matricaria recutita L.). Then, isothermal titration calorimetry was used to show that these alkaloids spontaneously interact with lipid bilayers that mimic the PPM. The greater impact of gramine on the thermotropic behaviour of lipids compared to hordenine was established by means of infrared spectroscopy. Finally, the molecular mechanisms of these interactions were explored with molecular dynamics simulations. The good correlation between phytotoxicity and the ability to disturb lipid bilayers is discussed. In this study, biophysical tools were used for the first time to investigate the interactions of allelochemicals with artificial PPM.

Molecular dynamics study of structure and vibrational spectra at zwitterionoic lipid/aqueous KCl, NaCl, and CaCl2 solution interfaces

Molecular dynamics (MD) simulations of KCl, NaCl, and CaCl₂ solution/dipalmytoylphosphatidylcholine lipid interfaces were performed to analyze heterodyne-detected vibrational sum frequency generation (HD-VSFG) spectra in relation to the interfacial water structure. The present MD simulation well reproduces the experimental spectra and elucidates a specific cation effect on the interfacial structure. The K⁺, Na⁺, and Ca²⁺ cation species penetrate in the lipid layer more than the anions in this order, due to the electrostatic interaction with negative polar groups of lipid, and the electric double layer between the cations and anions cancels the intrinsic orientation of water at the water/lipid interface. These mechanisms explain the HD-VSFG spectrum of the water/lipid interface and its spectral perturbation by adding the ions. The lipid monolayer reverses the order of surface preference of the cations at the solution/lipid interface from that at the solution/air interface.

Binding of trivalent metal ions (Al3+, In3+, La3+) with phosphatidylcholine liposomal membranes investigated by microelectrophoresis

Interactions between trivalent metal ions (Al³⁺, In³⁺, La³⁺) and phosphatidylcholine (PC) liposomes are studied by microelectrophoresis. The dependence of the PC membrane surface charge density and zeta potential on [Formula: see text] ([Formula: see text] range from 2 to 10) of the aqueous metal chloride solutions is determined. The obtained results indicate the adsorption of Al³⁺, In³⁺ and La³⁺ ions on phosphatidylcholine model membranes, leading to changes in the electrical properties of the membranes. The theoretical considerations on equilibria occurring between phosphatidylcholine liposomal membrane and trivalent metal ions are presented. A mathematical model describing the interactions in a quantitative way is proposed.

Probing molecular forces in multi-component physiological membranes

Biological membranes are remarkably heterogeneous, composed of diverse lipid mixtures with distinct chemical structure and composition. By combining molecular dynamics simulations and the newly developed Lipid-Force Distribution Analysis (L-FDA), we explore force transmission in complex multi-component membrane models mimicking eukaryotic organelles. We found that the chemical-moiety based segmentation at membrane interfaces revealed a distinctive distribution of bonded and non-bonded forces in diverse membrane environment. Our molecular stress analysis could have far-reaching implications in describing the relationship between membrane mechanical properties and functional states of chemically distinct lipids.

Understanding the interactions of imidazolium-based ionic liquids with cell membrane models

IL–phospholipid interactions were studied using Langmuir monolayers and molecular simulations.

Nanoscale Junction Formation by Gas-Phase Monolayer Doping

A major challenge in transistor technology scaling is the formation of controlled ultrashallow junctions with nanometer-scale thickness and high spatial uniformity. Monolayer doping (MLD) is an efficient method to form such nanoscale junctions, where the self-limiting nature of semiconductor surfaces is utilized to form adsorbed monolayers of dopant-containing molecules followed by rapid thermal annealing (RTA) to diffuse the dopants to a desired depth. Unlike ion implantation, the process does not induce crystal damage, thus making it highly attractive for nanoscale transistor processing. To date, reported MLD processes have relied on solution processing for monolayer formation. Gas-phase processing, however, benefits from higher intra- and interwafer uniformity and conformal coverage of 3D structures and is more desirable for manufacturing. In this regard, we report a new approach for MLD in silicon and germanium using gas-phase monolayer formation. We call this technology gas-phase monolayer doping (GP-MLD). This method relies on sequential pulse-purge cycles of gas-phase dopant-containing molecules to form a boron- or phosphorus-containing monolayer on a target semiconductor surface. Here, we show the feasibility of our approach through the formation of ultrashallow B- and P-doped junctions on Si and Ge surfaces. The mechanism of adsorption is characterized using Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. Sub-5 nm junction depths with high dopant dose are obtained as characterized by secondary ion mass spectrometry and sheet resistance measurements. Additionally, we demonstrate that area selectivity can be achieved via lithographic patterning of the monolayer dopants before the diffusion step. The results demonstrate the versatility of the GP-MLD approach for formation of controlled and ultrashallow junctions.

The complex nature of calcium cation interactions with phospholipid bilayers

Understanding interactions of calcium with lipid membranes at the molecular level is of great importance in light of their involvement in calcium signaling, association of proteins with cellular membranes, and membrane fusion. We quantify these interactions in detail by employing a combination of spectroscopic methods with atomistic molecular dynamics simulations. Namely, time-resolved fluorescent spectroscopy of lipid vesicles and vibrational sum frequency spectroscopy of lipid monolayers are used to characterize local binding sites of calcium in zwitterionic and anionic model lipid assemblies, while dynamic light scattering and zeta potential measurements are employed for macroscopic characterization of lipid vesicles in calcium-containing environments. To gain additional atomic-level information, the experiments are complemented by molecular simulations that utilize an accurate force field for calcium ions with scaled charges effectively accounting for electronic polarization effects. We demonstrate that lipid membranes have substantial calcium-binding capacity, with several types of binding sites present. Significantly, the binding mode depends on calcium concentration with important implications for calcium buffering, synaptic plasticity, and protein-membrane association.

Self-Organisation, Thermotropic and Lyotropic Properties of Glycolipids Related to their Biological Implications

Glycolipids are amphiphilic molecules which bear an oligo- or polysaccharide as hydrophilic head group and hydrocarbon chains in varying numbers and lengths as hydrophobic part. They play an important role in life science as well as in material science. Their biological and physiological functions are quite diverse, ranging from mediators of cell-cell recognition processes, constituents of membrane domains or as membrane-forming units. Glycolipids form an exceptional class of liquid-crystal mesophases due to the fact that their self-organisation obeys more complex rules as compared to classical monophilic liquid-crystals. Like other amphiphiles, the supra-molecular structures formed by glycolipids are driven by their chemical structure; however, the details of this process are still hardly understood. Based on the synthesis of specific glycolipids with a clearly defined chemical structure, e.g., type and length of the sugar head group, acyl chain linkage, substitution pattern, hydrocarbon chain lengths and saturation, combined with a profound physico-chemical characterisation of the formed mesophases, the principles of the organisation in different aggregate structures of the glycolipids can be obtained. The importance of the observed and formed phases and their properties are discussed with respect to their biological and physiological relevance. The presented data describe briefly the strategies used for the synthesis of the used glycolipids. The main focus, however, lies on the thermotropic as well as lyotropic characterisation of the self-organised structures and formed phases based on physico-chemical and biophysical methods linked to their potential biological implications and relevance.

Dual drug encapsulation in a novel nano-vesicular carrier for the treatment of cutaneous melanoma: characterization and in vitro/in vivo evaluation

The objective of this research was to develop and evaluate a dual drug-loaded dermal targeted vesicle for the treatment of cutaneous melanoma.

Microelectrophoretic investigation of the interactions between liposomal membranes formed from a phosphatidylcholine-phosphatidylglycerol mixture and monovalent ions

In this paper, we characterized the interactions between two-component liposomal membranes and monovalent electrolyte ions. Liposomes were formed from neutral (phosphatidylcholine) and anionic (phosphatidylglycerol) lipids mixed in various ratios. Microelectrophoresis was used to determine the dependence of the membrane surface charge density on the p H of the electrolyte solution. Changes in the membrane electric charge caused by the adsorption of Na(+), Cl(-), H(+), and OH(-) ions were observed, and the equilibria among these ions and the phosphatidylcholine-phosphatidylglycerol membrane surface were quantified. We proposed a mathematical model for characterizing these equilibria. Using this model, together with experimental data of the membrane surface charge density, we determined association constants characterizing the equilibria. Knowledge of these parameters was necessary to calculate the theoretical curves of the model. We validated the model by curve-fitting the experimental data points to simulated data generated by the model.

Formation of lysozyme oligomers at model cell membranes monitored with sum frequency generation spectroscopy

A growing number of studies suggest that the formation of toxic oligomers, precursors of amyloid fibrils, is initiated at the cell membrane and not in the cytosolic compartments of the cell. Studies of membrane-induced protein oligomerization are challenging due to the difficulties of probing small numbers of proteins present at membrane surfaces. Here, we employ surface-sensitive vibrational sum frequency generation (VSFG) to investigate the secondary structure of lysozyme at the surface of lipid monolayers. We investigate lysozyme aggregation at negatively charged 1,2-dipalmitoyl-sn-glycero-3-(phospho-rac-1-glycerol) (DPPG) lipid monolayers under different pH conditions. The changes in the molecular vibrations of lipids, proteins, and water as a function of pH and surface pressure allow us to simultaneously monitor details of the conformation state of lysozyme, the organization of lipids, and the state of lipid-bound water. At pH = 6 lysozyme induces significant disordering of the lipid layer, and it exists in two states: a monomeric state with a predominantly α-helix content and an oligomeric (za-mer) state. At pH ≤ 3, all membrane-bound lysozyme self-associates into oligomers characterized by an antiparallel β-sheet structure. This is different from the situation in bulk solution, for which circular dichroism (CD) shows that the protein maintains an α-helix conformation, under both neutral and acidic pH conditions. The transition from monomers to oligomers is also associated with a decreased hydration of the lipid monolayer resulting in an increase of the lipid acyl chains ordering. The results indicate that oligomerization requires cooperative action between lysozyme incorporated into the lipid membrane and peripherally adsorbed lysozyme and is associated with the membrane dehydration and lipid reorganization. Membrane-bound oligomers with antiparallel β-sheet structure are found to destabilize lipid membranes.

Binding of a ruthenium complex to a thioether ligand embedded in a negatively charged lipid bilayer: a two-step mechanism

The interaction between the ruthenium polypyridyl complex [Ru(terpy)(dcbpy)(H2O)](2+) (terpy = 2,2';6',2"-terpyridine, dcbpy = 6,6'-dichloro-2,2'-bipyridine) and phospholipid membranes containing either thioether ligands or cholesterol were investigated using UV-visible spectroscopy, Langmuir-Blodgett monolayer surface pressure measurements, and isothermal titration calorimety (ITC). When embedded in a membrane, the thioether ligand coordinated to the dicationic metal complex only when the phospholipids of the membrane were negatively charged, that is, in the presence of attractive electrostatic interaction. In such a case coordination is much faster than in homogeneous conditions. A two-step model for the coordination of the metal complex to the membrane-embedded sulfur ligand is proposed, in which adsorption of the complex to the negative surface of the monolayers or bilayers occurs within minutes, whereas formation of the coordination bond between the surface-bound metal complex and ligand takes hours. Finally, adsorption of the aqua complex to the membrane is driven by entropy. It does not involve insertion of the metal complex into the hydrophobic lipid layer, but rather simple electrostatic adsorption at the water-bilayer interface.

Mechanical and electrokinetic effects of polyamines/phospholipid interactions in model membranes

The mechanical and electrical properties of phospholipids layers influenced by interaction with polyamines were determined by measuring surface pressure and compression modulus of monolayers and zeta potential of liposomes. The saturated derivative of phosphatidic acid (DPPA) formed layers of the organization varying with compression degree. Contact of DPPA layers with polyamines present in the subphase resulted in changing their mechanical properties and the conditions in which the layer reorganization appears. The parameters corresponding to the layer reorganization depended on the size and charge of polyamines' molecules. The values of: area per DPPA molecule, surface pressure at the point of layer structure reorganization, and surface pressure at the point of collapse characterizing of DPPA layers in the studied systems were determined. It was found that polyamines influenced to a much lesser extent the mechanical properties of monolayers formed from unsaturated derivative of phosphatidic acid slightly increasing its mechanical resistance in the range of higher molecular packing. The results of electrokinetic measurements revealed that surface charge of phosphatidic acid liposomes was effectively neutralized in the presence of polyamines. A similar effect was observed for phosphatidyl glycerol and for negatively charged polystyrene latex particles used as a reference. The influence of polyamines on the mechanical properties of DPPA layers was interpreted assuming a possibility of penetration of the lipid layer by polyamines' molecules. Comparison of action of putrescine and calcium ions and effects of polyamines on phosphatidyl glycerol provided additional justification for the proposed interpretation of the observed effects.

Modulation of human α-synuclein aggregation by a combined effect of calcium and dopamine

Parkinson's disease is characterized by the deposition of aggregated α-syn and its familial mutants into Lewy bodies leading to death of dopaminergic neurons. α-syn is involved in Ca(II) and dopamine (DA) signaling and their adequate balance inside neuronal cytoplasm is essential for maintaining healthy dopaminergic neurons. We have probed the binding energetics of Ca(II) and DA to human α-syn and its familial mutants A30P, A53T and E46K using isothermal titration calorimetry and have investigated the conformational and aggregation aspects using circular dichroism and fluorescence spectroscopy. While binding of Ca(II) to α-syn and its familial mutants was observed to be endothermic in nature, interaction of DA with α-syn was not detectable. Ca(II) enhanced fibrillation of α-syn and its familial mutants while DA promoted the formation of oligomers. However, Ca(II) and DA together critically favored the formation of protofibrils that are more cytotoxic than the mature fibrils. Using fluorescently labeled cysteine mutant A90C, we have shown that different aggregating species of α-syn formed in the presence of Ca(II) and DA are internalized into the human neuroblastoma cells with different rates and are responsible for the differential cytotoxicity depending on their nature. The findings put together suggest that an interplay between the concentrations of Ca(II), DA and α-syn can critically regulate the formation of various aggregating species responsible for the survival of dopaminergic neurons. Modulating this balance leading to either complete suppression of α-syn aggregation or promoting the formation of mature fibrils could be used as a strategy for the development of drugs to cure Parkinson's disease.

Hydrophobic segment of dengue virus C protein. Interaction with model membranes

Dengue virus (DENV) C protein is essential for viral assembly. DENV C protein associates with intracellular membranes through a conserved hydrophobic domain and accumulates around endoplasmic reticulum-derived lipid droplets which could provide a platform for capsid formation during assembly. In a previous work we described a region in DENV C protein which induced a nearly complete membrane rupture of several membrane model systems, which was coincident with the theoretically predicted highly hydrophobic region of the protein. In this work we have carried out a study of the binding to and interaction with model biomembranes of a peptide corresponding to this DENV C region, DENV2C6. We show that DENV2C6 partitions into phospholipid membranes, is capable of rupturing membranes even at very low peptide-to-lipid ratios and its membrane-activity is modulated by lipid composition. These results identify an important region in the DENV C protein which might be directly implicated in the DENV life cycle through the modulation of membrane structure.

N-terminal AH2 segment of protein NS4B from hepatitis C virus. Binding to and interaction with model biomembranes

HCV NS4B, a highly hydrophobic protein involved in the alteration of the intracellular host membranes forming the replication complex, plays a critical role in the HCV life cycle. NS4B is a multifunctional membrane protein that possesses different regions where diverse and significant functions are located. One of these important regions is the AH2 segment, which besides being highly conserved has been shown to play a significant role in NS4B functioning. We have carried out an in-depth biophysical study aimed at the elucidation of the capacity of this region to interact, modulate and disrupt membranes, as well as to study the structural and dynamic features relevant for that disruption. We show that a peptide derived from this region, NS4BAH2, is capable of specifically binding phosphatidyl inositol phosphates with high affinity, and its interfacial properties suggest that this segment could behave similarly to a pre-transmembrane domain partitioning into and interacting with the membrane depending on the membrane composition and/or other proteins. Moreover, NS4BAH2 is capable of rupturing membranes even at very low peptide-to-lipid ratios and its membrane-activity is modulated by lipid composition. NS4BAH2 is located in a shallow position in the membrane but it is able to affect the lipid environment from the membrane surface down to the hydrophobic core. The NS4B region where peptide NS4BAH2 resides might have an essential role in the membrane replication and/or assembly of the viral particle through the modulation of the membrane structure and hence the replication complex.

Cardiolipin Models for Molecular Simulations of Bacterial and Mitochondrial Membranes

Present in bacterial and mitochondrial membranes, cardiolipins have a unique dimeric structure, which carries up to two charges (i.e., one per phosphate group) and, under physiological conditions, can be unprotonated or singly protonated. Exhaustive models and characterization of cardiolipins are to date scarce; therefore we propose an ab initio parametrization of cardiolipin species for molecular simulation consistent with commonly used force fields. Molecular dynamics simulations using these models indicate a protonation dependent lipid packing. A peculiar interaction with solvating mono- and divalent cations is also observed. The proposed models will contribute to the study of the assembly of more realistic bacterial and mitochondrial membranes and the investigation of the role of cardiolipins for the biophysical and biochemical properties of membranes and membrane-embedded proteins.

Interaction with membranes of the full C-terminal domain of protein NS4B from hepatitis C virus

Hepatitis C virus (HCV) NS4B protein is a transmembrane highly hydrophobic protein responsible for many key aspects of the viral replication process. The C-terminal part of NS4B is essential for replication and is a potential target for HCV replication inhibitors. In this work we have carried out a study of the binding to and interaction with model biomembranes of a peptide corresponding to the C-terminal domain of NS4B, NS4B(Cter). We show that NS4B(Cter) partitions into phospholipid membranes, is capable of rupturing membranes even at very low peptide-to-lipid ratios and its membrane-activity is modulated by lipid composition. NS4B(Cter) is located in a shallow position in the membrane but it is able to affect the lipid environment from the membrane surface down to the hydrophobic core. Our results identify the C-terminal region of the HCV NS4B protein as a membrane interacting domain, and therefore directly implicated in the HCV life cycle and possibly in the formation of the membranous web.

Percutaneous penetration modifiers and formulation effects: thermal and spectral analyses

The study investigated the formulation effects of laurocapram and iminosulfurane derived penetration modifiers on human stratum corneum using thermal and spectral analyses. Firstly, formulations of penetration modifiers were assessed as enhancers/retardants using the model permeant, diethyl-m-toluamide followed by investigation of their mechanisms of action using differential scanning calorimetry (DSC) and attenuated total reflectance Fourier-transform infra-red spectroscopy. The penetration modifiers investigated were laurocapram, 3-dodecanoyloxazolidin-2-one (N-0915), S,S-dimethyl-N-(4-bromobenzoyl) iminosulfurane (DMBIS), S,S-dimethyl-N-(2-methoxycarbonylbenzenesulfonyl) iminosulfurane (DMMCBI) and tert-butyl 1-dodecyl-2-oxoazepan-3-yl-carbamate (TBDOC) that were formulated in either water, propylene glycol (PG), ethanol or polyethylene glycol 400 (PEG 400). The results explain the mechanism for the first time why an enhancer can become a retardant or vice versa depending upon the vehicle in which it is applied to the skin. DSC indicated that penetration modifier formulations enhanced permeation of active mainly by disruption and fluidization of the stratum corneum lipid bilayers while IR data indicated characteristic blue shifts with decreases in peak intensity. On the other hand, DSC of penetration modifier formulations showing retardation depicted elevated T (m2) with a strengthening of lipid-protein complex while IR results indicated formation of multiple peaks around 1,738 cm(-1) transition in stratum corneum spectra suggesting retardation may be caused by organization of SC lipids by increased H-bonding.

The microstructure of the stratum corneum lipid barrier: mid-infrared spectroscopic studies of hydrated ceramide:palmitic acid:cholesterol model systems

The current mid-infrared spectroscopic study is a systematic investigation of hydrated stratum corneum lipid barrier model systems composed of an equimolar mixture of a ceramide, free palmitic acid and cholesterol. Four different ceramide molecules (CER NS, CER NP, CER NP-18:1, CER AS) were investigated with regard to their microstructure arrangement in a stratum corneum lipid barrier model system. Ceramide molecules were chosen from the sphingosine and phytosphingosine groups. The main differences in the used ceramide molecules result from their polar head group architecture as well as hydrocarbon chain properties. The mixing properties with cholesterol and palmitic acid are considered. This is feasible by using perdeuterated palmitic acid and proteated ceramides. Both molecules can be monitored separately, within the same experiment, using mid-infrared spectroscopy; no external label is necessary. At physiological relevant temperatures, between 30 and 35 degrees C, orthorhombic as well as hexagonal chain packing of the ceramide molecules is observed. The formation of these chain packings are extremely dependent on lipid hydration, with a decrease in ceramide hydration favouring the formation of orthorhombic hydrocarbon chain packing, as well as temperature. The presented data suggest in specific cases phase segregation in ceramide and palmitic acid rich phases. However, other ceramides like CER NP-18:1 show a rather high miscibility with palmitic acid and cholesterol. For all investigated ternary systems, more or less mixing of palmitic acid with cholesterol is observed. The investigated stratum corneum mixtures exhibit a rich polymorphism from crystalline domains with heterogeneous lipid composition to a "fluid" homogeneous phase. Thus, a single gel phase is not evident for the presented stratum corneum model systems. The study shows, that under skin physiological conditions (pH 5.5, hydrated, 30-35 degrees C) ternary systems composed of an equimolar ratio of ceramides, free palmitic acid and cholesterol may form gel-like domains delimitated by a liquid-crystalline phase boundary. The presented results support the microstructural arrangement of the stratum corneum lipids as suggested by the domain mosaic model.

ATR-FTIR studies of phospholipid vesicle interactions with alpha-FeOOH and alpha-Fe2O3 surfaces

Prior infrared spectroscopic studies of extracellular polymeric substances (EPS) and live bacterial cells have indicated that organic phosphate groups mediate cell adhesion to iron oxides via inner-sphere P-OFe surface complexation. Since cell membrane phospholipids are a potential source of organic phosphate groups, we investigated the adhesion of phospholipidic vesicles to the surfaces of the iron (oxyhydr)oxides goethite (alpha-FeOOH) and hematite (alpha-Fe2O3) using attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy. l-alpha-phosphatidylcholine (PC), phosphatidylethanolamine (PE) and phosphatidic acid (PA) were used because they are vesicle forming phospholipids representative of prokaryotic and eukaryotic cell surface membranes. Phospholipid vesicles, formed in aqueous suspension, were characterized by transmission electron microscopy (TEM), multi-angle laser light scattering (MALS) and quasi-elastic light scattering (QELS). Their adhesion to goethite and hematite surfaces was studied with ATR-FTIR at pH 5. Results indicate that PC and PE adsorption is affected by electrostatic interaction and H-bonding (PE). Conversely, adsorption of PA involves phosphate inner-sphere complexes, for both goethite and hematite, via P-OFe bond formation. Biomolecule adsorption at the interface was observed to occur on the scale of minutes to hours. Exponential and linear increases in peak intensity were observed for goethite and hematite, respectively. Our ATR-FTIR results on the PA terminal phosphate are in good agreement with those on EPS reacted with goethite and on bacterial cell adhesion to hematite. These findings suggest that the plasma membrane, and the PA terminal phosphate in particular, may play a role in mediating the interaction between bacteria and iron oxide surfaces during initial stages of biofilm formation.

Glycosyl-nucleoside lipids as low-molecular-weight gelators

A family of new glycosyl-nucleoside lipids (GNLs) that were prepared using a convenient "double click" chemistry route is described. Physicochemical studies (surface tension measurements, gelation properties, and transmission electron microscopy) indicate that these amphiphiles spontaneously assemble into supramolecular structures including fibers, vesicles, hydrogels, and organogels. GNLs possess unique gelation properties both in water and chloroform. A very low minimum gelation concentration of 0.1% (w/w) was observed in the case of the amide-saturated derivative in water.