Differential interaction of equinatoxin II with model membranes in response to lipid composition

Sticholysin recognition of ceramide-phosphoethanolamine

Actinoporins are pore-forming toxins produced by sea anemones. They exert their activity by binding to the membranes of target cells. There, they oligomerize, forming cation-selective pores, and inducing cell death by osmotic shock. In the early days of the field, it was shown that accessible sphingomyelin (SM) in the bilayer is required for the activity of actinoporins. While these toxins can also act on membranes composed solely of phosphatidylcholine (PC) with a high amount of cholesterol (Chol), consensus is that SM acts as a lipid receptor for actinoporins. It has been shown that the 2NH and 3OH moieties of SM are essential for actinoporin recognition. Hence, we wondered if ceramide-phosphoethanolamine (CPE) could also be recognized. Like SM, CPE has the 2NH and 3OH groups, and a positively charged headgroup. While actinoporins have been observed to affect membranes containing CPE, Chol was always also present, with the recognition of CPE remaining unclear. To test this possibility, we used sticholysins, produced by the Caribbean Sea anemone Stichodactyla helianthus. Our results show that sticholysins can induce calcein release on vesicles composed only of PC and CPE, in absence of Chol, in a way that is comparable to that induced on PC:SM membranes.

Cys mutants as tools to study the oligomerization of the pore-forming toxin sticholysin I

Sticholysin I (StI) is a water-soluble protein with the ability to bind membranes where it oligomerizes and forms pores leading to cell death. Understanding the assembly property of this protein may be valuable for designing potential biotechnological tools, such as stable or structurally defined nanopores. In order to get insights into the stabilization of StI oligomers by disulfide bonds, we designed and characterized single and double cysteine mutants at the oligomerization interface. The oligomer formation was induced in the presence of lipid membranes and visualized by SDS-PAGE. The contribution of the oligomeric structures to the membrane binding and pore-forming capacities of StI was assessed. Single and double cysteine introduction at the protein-protein oligomerization interface does not considerably affect the conformation and function of the monomeric protein. In the presence of membranes, a cysteine double mutation at positions 15 and 59 favored formation of different size oligomers stabilized by disulfide bonds. The results of this work highlight the relevance of these positions (15 and 59) to be considered for developing biosensors based on nanopores from StI.

Determination of the boundary lipids of sticholysins using tryptophan quenching

Sticholysins are α-pore-forming toxins produced by the sea-anemone Stichodactyla helianthus. These toxins exert their activity by forming pores on sphingomyelin-containing membranes. Recognition of sphingomyelin by sticholysins is required to start the process of pore formation. Sphingomyelin recognition is coupled with membrane binding and followed by membrane penetration and oligomerization. Many features of these processes are known. However, the extent of contact with each of the different kinds of lipids present in the membrane has received little attention. To delve into this question, we have used a phosphatidylcholine analogue labeled at one of its acyl chains with a doxyl moiety, a known quencher of tryptophan emission. Here we present evidence for the contact of sticholysins with phosphatidylcholine lipids in the sticholysin oligomer, and for how each sticholysin isotoxin is affected differently by the inclusion of cholesterol in the membrane. Furthermore, using phosphatidylcholine analogs that were labeled at different positions of their structure (acyl chains and headgroup) in combination with a variety of sticholysin mutants, we also investigated the depth of the tryptophan residues of sticholysins in the bilayer. Our results indicate that the position of the tryptophan residues relative to the membrane normal is deeper when cholesterol is absent from the membrane.

Sea Anemones, Actinoporins, and Cholesterol

Spanish or Spanish-speaking scientists represent a remarkably populated group within the scientific community studying pore-forming proteins. Some of these scientists, ourselves included, focus on the study of actinoporins, a fascinating group of metamorphic pore-forming proteins produced within the venom of several sea anemones. These toxic proteins can spontaneously transit from a water-soluble fold to an integral membrane ensemble because they specifically recognize sphingomyelin in the membrane. Once they bind to the bilayer, they subsequently oligomerize into a pore that triggers cell-death by osmotic shock. In addition to sphingomyelin, some actinoporins are especially sensible to some other membrane components such as cholesterol. Our group from Universidad Complutense of Madrid has focused greatly on the role played by sterols in this water–membrane transition, a question which still remains only partially solved and constitutes the main core of the article below.

The pore-forming activity of sticholysin I is enhanced by the presence of a phospholipid hydroperoxide in membrane

Sticholysin I (StI) is a pore-forming toxin (PFT) belonging to the actinoporin protein family characterized by high permeabilizing activity in membranes. StI readily associates with sphingomyelin (SM)-containing membranes originating pores that can lead to cell death. Binding and pore-formation are critically dependent on the physicochemical properties of membrane. 1-palmitoyl-2-oleoylphosphatidylcholine hydroperoxide (POPC-OOH) is an oxidized phospholipid (OxPL) containing an -OOH moiety in the unsaturated hydrocarbon chain which orientates towards the bilayer interface. This orientation causes an increase in the lipid molecular area, lateral expansion and decrease in bilayer thickness, elastic and bending modulus, as well as modification of lipid packing. Taking advantage of membrane structural changes promoted by POPC-OOH, we investigated its influence on the permeabilizing ability of StI. Here we report the action of StI on Giant Unilamellar Vesicles (GUVs) made of 1-palmitoyl-2-oleoylphosphatidylcholine (POPC) and SM containing increasing amount of POPC-OOH to assess vesicle permeability changes when compared to OxPL-lacking membranes. Inclusion of POPC-OOH in membranes did not promote spontaneous vesicle leaking but resulted in increased membrane permeability due to StI action. StI activity did not modify the fluid-gel phase coexistence boundaries neither in POPC:SM or POPC-OOH:SM membranes. However, the StI insertion mechanism in membrane seems to differ between POPC:SM and POPC-OOH:SM mixtures as suggested by changes in the time course of monolayer surface tension measurements, even though a preferable binding of the toxin to OxPL-containing systems could not be here demonstrated. In summary, modifications in the membrane imposed by lipid hydroperoxidation favor StI permeabilizing activity.

Structural and functional analysis of Hydra Actinoporin-Like Toxin 1 (HALT-1)

Actinoporins are a family of α-pore-forming toxins (α-PFTs) that have been identified in sea anemones. Recently, a freshwater Hydra Actinoporin-Like Toxin (HALT) gene family was found in Hydra magnipapillata. Unlike sea anemone actinoporins that use sphingomyelin as their main recognition target, the HALTs proteins may recognise alternative lipid molecules as their target. To unveil the structural insights into lipid preference of HALTs protein as compared to sea anemone actinoporins, we have determined the first crystal structure of actinoporin-like toxin, HALT-1 at 1.43 Å resolution with an acetylated lysine residue K76. Despite the overall structure of HALT-1 sharing a high structural similarity to sea anemone actinoporins, the atomic resolution structure revealed several unique structural features of HALT-1 that may influence the lipid preference and oligomerisation interface. The HALT-1 contains a RAG motif in place of the highly conserved RGD motif found in sea anemone actinoporins. The RAG motif contributed to a sharper β9-β10 turn, which may sway its oligomerisation interface in comparison to sea anemone actinoporins. In the lipid-binding region, the HALT-1 contains a shorter α2 helix and a longer α2-β9 loop due to deletion and subsequently an insertion of five amino acid residues in comparison to the sea anemone actinoporins. Structure comparison and molecular docking analysis further revealed that the HALT-1 lipid-binding site may favour sphingolipids with sulfate or phosphate head group more than the sphingomyelin. The structure of HALT-1 reported here provides a new insight for a better understanding of the evolution and lipid recognition mechanism of actinoporin.

Structural foundations of sticholysin functionality

Actinoporins constitute a family of α pore-forming toxins produced by sea anemones. The soluble fold of these proteins consists of a β-sandwich flanked by two α-helices. Actinoporins exert their activity by specifically recognizing sphingomyelin at their target membranes. Once there, they penetrate the membrane with their N-terminal α-helices, a process that leads to the formation of cation-selective pores. These pores kill the target cells by provoking an osmotic shock on them. In this review, we examine the role and relevance of the structural features of actinoporins, down to the residue level. We look at the specific amino acids that play significant roles in the function of actinoporins and their fold. Particular emphasis is given to those residues that display a high degree of conservation across the actinoporin sequences known to date. In light of the latest findings in the field, the membrane requirements for pore formation, the effect of lipid composition, and the process of pore formation are also discussed.

Lipid interactions of an actinoporin pore-forming oligomer

The actinoporins are cytolytic toxins produced by sea anemones. Upon encountering a membrane, preferably containing sphingomyelin, they oligomerize and insert their N-terminal helix into the membrane, forming a pore. Whether sphingomyelin is specifically recognized by the protein or simply induces phase coexistence in the membrane has been debated. Here, we perform multi-microsecond molecular dynamics simulations of an octamer of fragaceatoxin C, a member of the actinoporin family, in lipid bilayers containing either pure 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) or a 1:1 mixture of DOPC and palmitoyl sphingomyelin (PSM). The complex is highly stable in both environments, with only slight fraying of the inserted helices near their N-termini. Analyzing the structural parameters of the mixed membrane in the course of the simulation, we see signs of a phase transition for PSM in the inner leaflet of the bilayer. In both leaflets, cross-interactions between lipids of different type decrease over time. Surprisingly, the aromatic loop thought to be responsible for sphingomyelin recognition interacts more with DOPC than PSM by the end of the simulation. These results support the notion that the key membrane property that actinoporins recognize is lipid phase coexistence.

Molecular basis for the activation of actinoporins by lipids

Actinoporins are a family of homologous pore forming proteins from sea anemones. They are one of the few families of eukaryotic toxins that have been characterized in depth. Actinoporins are activated by lipids in the context of bilayers, especially in cell and in model membranes containing the lipid sphingomyelin. These proteins must undergo conformational changes induced upon interaction with lipids in the membrane, where they form cytotoxic pores causing cell death and lethality. Herein we review a list of procedures and techniques to study this family of toxins, with the goal of elucidating the physicochemical, thermodynamic and structural basis for their activation by lipids. The emerging picture indicates that actinoporins undergo a stepwise process that includes binding to the membrane, oligomerization, and pore formation, in this order. The key transformation from the inactive oligomer to the active pore is catalyzed by sphingomyelin, explaining the key role of this lipid in the function of actinoporins.

Functional and Structural Variation among Sticholysins, Pore-Forming Proteins from the Sea Anemone Stichodactyla helianthus

Venoms constitute complex mixtures of many different molecules arising from evolution in processes driven by continuous prey-predator interactions. One of the most common compounds in these venomous cocktails are pore-forming proteins, a family of toxins whose activity relies on the disruption of the plasmatic membranes by forming pores. The venom of sea anemones, belonging to the oldest lineage of venomous animals, contains a large amount of a characteristic group of pore-forming proteins known as actinoporins. They bind specifically to sphingomyelin-containing membranes and suffer a conformational metamorphosis that drives them to make pores. This event usually leads cells to death by osmotic shock. Sticholysins are the actinoporins produced by Stichodactyla helianthus. Three different isotoxins are known: Sticholysins I, II, and III. They share very similar amino acid sequence and three-dimensional structure but display different behavior in terms of lytic activity and ability to interact with cholesterol, an important lipid component of vertebrate membranes. In addition, sticholysins can act in synergy when exerting their toxin action. The subtle, but important, molecular nuances that explain their different behavior are described and discussed throughout the text. Improving our knowledge about sticholysins behavior is important for eventually developing them into biotechnological tools.

Self-association and folding in membrane determine the mode of action of peptides from the lytic segment of sticholysins

Sticholysin I and II (Sts: St I and St II) are proteins of biomedical interest that form pores upon the insertion of their N-terminus in the plasma membrane. Peptides spanning the N-terminal residues of StI (StI_1-31) or StII (StII_1-30) can mimic the permeabilizing ability of these toxins, emerging as candidates to rationalize their potential biomedical applications. These peptides have different activities that correlate with their hydrophobicity. However, it is not clear how this property contributes to peptide folding in solution or upon binding to membranes. Here we compared the conformational properties of these peptides and shorter versions lacking the hydrophobic segment 1-11 of StI (StI_12-31) or 1-10 of StII (StII_11-30). Folding of peptides was assessed in solution and in membrane mimetic systems and related with their ability to bind to membranes and to permeabilize lipid vesicles. Our results suggest that the differences in activity among peptides could be ascribed to their different folding propensity and different membrane binding properties. In solution, StII_1-30 tends to acquire α-helical conformation coexisting with self-associated structures, while StI_1-31 remains structureless. Both peptides fold as α-helix in membrane; but StII_1-30 also self-associates in the lipid environment, a process that is favored by its higher affinity for membrane. We stress the contribution of the non-polar/polar balance of the 1-10 amino acid sequence of the peptides as a determining factor for different self-association capabilities. Such difference in hydrophobicity seems to determine the molecular path of peptides folding upon binding to membranes, with an impact in their permeabilizing activity. This study contributes to a better understanding of the molecular mechanisms underlying the permeabilizing activity of Sts N-terminal derived peptides, with connotation for the exploitation of these small molecules as alternative of the full-length toxins in clinical settings.

Haemolytic actinoporins interact with carbohydrates using their lipid-binding module

Pore-forming toxins (PFTs) are proteins endowed with metamorphic properties that enable them to stably fold in water solutions as well as in cellular membranes. PFTs produce lytic pores on the plasma membranes of target cells conducive to lesions, playing key roles in the defensive and offensive molecular systems of living organisms. Actinoporins are a family of potent haemolytic toxins produced by sea anemones vigorously studied as a paradigm of α-helical PFTs, in the context of lipid-protein interactions, and in connection with nanopore technologies. We have recently reported that fragaceatoxin C (FraC), an actinoporin, engages biological membranes with a large adhesive motif allowing the simultaneous attachment of up to four lipid molecules prior to pore formation. Since actinoporins also interact with carbohydrates, we sought to understand the molecular and energetic basis of glycan recognition by FraC. By employing structural and biophysical methodologies, we show that FraC engages glycans with low affinity using its lipid-binding module. Contrary to other PFTs requiring separate domains for glycan and lipid recognition, the small single-domain actinoporins economize resources by achieving dual recognition with a single binding module. This mechanism could enhance the recruitment of actinoporins to the surface of target tissues in their marine environment.This article is part of the themed issue 'Membrane pores: from structure and assembly, to medicine and technology'.

One single salt bridge explains the different cytolytic activities shown by actinoporins sticholysin I and II from the venom of Stichodactyla helianthus

Sticholysins I and II (StnI and StnII), α-pore forming toxins from the sea anemone Stichodactyla helianthus, are water-soluble toxic proteins which upon interaction with lipid membranes of specific composition bind to the bilayer, extend and insert their N-terminal α-helix, and become oligomeric integral membrane structures. The result is a pore that leads to cell death by osmotic shock. StnI and StnII show 93% of sequence identity, but also different membrane pore-forming activities. The hydrophobicity profile along the first 18 residues revealed differences which were canceled by substituting StnI amino acids 2 and 9. Accordingly, the StnID9A mutant, and the corresponding StnIE2AD9A variant, showed enhanced hemolytic activity. They also revealed a key role for an exposed salt bridge between Asp9 and Lys68. This interaction is not possible in StnII but appears conserved in the other two well-characterized actinoporins, equinatoxin II and fragaceatoxin C. The StnII mutant A8D showed that this single replacement was enough to transform StnII into a version with impaired pore-forming activity. Overall, the results show the key importance of this salt bridge linking the N-terminal stretch to the β-sandwich core. A conclusion of general application for the understanding of salt bridges role in protein design, folding and stability.

Identification of a target protein of Hydra actinoporin-like toxin-1 (HALT-1) using GST affinity purification and SILAC-based quantitative proteomics

Hydra actinoporin-like toxin-1 (HALT-1) is a 20.8 kDa pore-forming toxin isolated from Hydra magnipapillata. HALT-1 shares structural similarity with actinoporins, a family that is well known for its haemolytic and cytolytic activity. However, the precise pore-forming mechanism of HALT-1 remains an open question since little is known about the specific target binding for HALT-1. For this reason, a comprehensive proteomic analysis was performed using affinity purification and SILAC-based mass spectrometry to identify potential protein-protein interactions between mammalian HeLa cell surface proteins and HALT-1. A total of 4 mammalian proteins was identified, of which only folate receptor alpha was further verified by ELISA. Our preliminary results highlight an alternative-binding mode of HALT-1 to the human plasma membrane. This is the first evidence showing that HALT-1, an actinoporin-like protein, binds to a membrane protein, the folate receptor alpha. This study would advance our understanding of the molecular basis of toxicity of pore-forming toxins and provide new insights in the production of more potent inhibitors for the toxin-membrane receptor interactions.

Disrupting a key hydrophobic pair in the oligomerization interface of the actinoporins impairs their pore-forming activity

Crystallographic data of the dimeric and octameric forms of fragaceatoxin C (FraC) suggested the key role of a small hydrophobic protein-protein interaction surface for actinoporins oligomerization and pore formation in membranes. However, site-directed mutagenesis studies supporting this hypothesis for others actinoporins are still lacking. Here, we demonstrate that disrupting the key hydrophobic interaction between V60 and F163 (FraC numbering scheme) in the oligomerization interface of FraC, equinatoxin II (EqtII), and sticholysin II (StII) impairs the pore formation activity of these proteins. Our results allow for the extension of the importance of FraC protein-protein interactions in the stabilization of the oligomeric intermediates of StII and EqtII pointing out that all of these proteins follow a similar pathway of membrane disruption. These findings support the hybrid pore proposal as the universal model of actinoporins pore formation. Moreover, we reinforce the relevance of dimer formation, which appears to be a functional intermediate in the assembly pathway of some different pore-forming proteins.

Differential Effect of Membrane Composition on the Pore-Forming Ability of Four Different Sea Anemone Actinoporins

Sea anemone actinoporins constitute a protein family of multigene pore-forming toxins (PFT). Equinatoxin II (EqtII), fragaceatoxin C (FraC), and sticholysins I and II (StnI and StnII, respectively), produced by three different sea anemone species, are the only actinoporins whose molecular structures have been studied in depth. These four proteins show high sequence identities and practically coincident three-dimensional structures. However, their pore-forming activity can be quite different depending on the model lipid system employed, a feature that has not been systematically studied before. Therefore, the aim of this work was to evaluate and compare the influence of several distinct membrane conditions on their particular pore-forming behavior. Using a complex model membrane system, such as sheep erythrocytes, StnII showed hemolytic activity much higher than those of the other three actinoporins studied. In lipid model systems, pore-forming ability when assayed against 4:1 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC)/sphingomyelin (SM) vesicles, with the membrane binding being the rate-limiting step, decreased in the following order: StnI > StnII > EqtII > FraC. When using 1:1:1 DOPC/SM/cholesterol LUVs, the presence of Chol not only enhanced membrane binding affinities by ∼2 orders of magnitude but also revealed how StnII was much faster than the other three actinoporins in producing calcein release. This ability agrees with the proposal that explains this behavior in terms of their high sequence variability along their first 30 N-terminal residues. The influence of interfacial hydrogen bonding in SM- or dihydro-SM-containing bilayers was also shown to be a generalized feature of the four actinoporins studied. It is finally hypothesized that this observed variable ability could be explained as a consequence of their distinct specificities and/or membrane binding affinities. Eventually, this behavior can be modulated by the nature of their natural target membranes or the interaction with not yet characterized isotoxin forms from the same sea anemone species.

Identification of a Membrane-bound Prepore Species Clarifies the Lytic Mechanism of Actinoporins

Pore-forming toxins (PFTs) are cytolytic proteins belonging to the molecular warfare apparatus of living organisms. The assembly of the functional transmembrane pore requires several intermediate steps ranging from a water-soluble monomeric species to the multimeric ensemble inserted in the cell membrane. The non-lytic oligomeric intermediate known as prepore plays an essential role in the mechanism of insertion of the class of β-PFTs. However, in the class of α-PFTs, like the actinoporins produced by sea anemones, evidence of membrane-bound prepores is still lacking. We have employed single-particle cryo-electron microscopy (cryo-EM) and atomic force microscopy to identify, for the first time, a prepore species of the actinoporin fragaceatoxin C bound to lipid vesicles. The size of the prepore coincides with that of the functional pore, except for the transmembrane region, which is absent in the prepore. Biochemical assays indicated that, in the prepore species, the N terminus is not inserted in the bilayer but is exposed to the aqueous solution. Our study reveals the structure of the prepore in actinoporins and highlights the role of structural intermediates for the formation of cytolytic pores by an α-PFT.

Synergistic Action of Actinoporin Isoforms from the Same Sea Anemone Species Assembled into Functionally Active Heteropores

Among the toxic polypeptides secreted in the venom of sea anemones, actinoporins are the pore-forming toxins whose toxic activity relies on the formation of oligomeric pores within biological membranes. Intriguingly, actinoporins appear as multigene families that give rise to many protein isoforms in the same individual displaying high sequence identities but large functional differences. However, the evolutionary advantage of producing such similar isotoxins is not fully understood. Here, using sticholysins I and II (StnI and StnII) from the sea anemone Stichodactyla helianthus, it is shown that actinoporin isoforms can potentiate each other's activity. Through hemolysis and calcein releasing assays, it is revealed that mixtures of StnI and StnII are more lytic than equivalent preparations of the corresponding isolated isoforms. It is then proposed that this synergy is due to the assembly of heteropores because (i) StnI and StnII can be chemically cross-linked at the membrane and (ii) the affinity of sticholysin mixtures for the membrane is increased with respect to any of them acting in isolation, as revealed by isothermal titration calorimetry experiments. These results help us understand the multigene nature of actinoporins and may be extended to other families of toxins that require oligomerization to exert toxicity.

Pore-forming toxins: Properties, diversity, and uses as tools to image sphingomyelin and ceramide phosphoethanolamine

Pore-forming toxins (PFTs) represent a unique class of highly specific lipid-binding proteins. The cytotoxicity of these compounds has been overcome through crystallographic structure and mutation studies, facilitating the development of non-toxic lipid probes. As a consequence, non-toxic PFTs have been utilized as highly specific probes to visualize the diversity and dynamics of lipid nanostructures in living and fixed cells. This review is focused on the application of PFTs and their non-toxic analogs as tools to visualize sphingomyelin and ceramide phosphoethanolamine, two major phosphosphingolipids in mammalian and insect cells, respectively. This article is part of a Special Issue entitled: Pore-Forming Toxins edited by Mauro Dalla Serra and Franco Gambale.

Pore formation by actinoporins, cytolysins from sea anemones

Actinoporins (APs) from sea anemones are ~20 kDa pore forming toxins with a β-sandwich structure flanked by two α-helices. The molecular mechanism of APs pore formation is composed of several well-defined steps. APs bind to membrane by interfacial binding site composed of several aromatic amino acid residues that allow binding to phosphatidylcholine and specific recognition of sphingomyelin. Subsequently, the N-terminal α-helix from the β-sandwich has to be inserted into the lipid/water interphase in order to form a functional pore. Functional studies and single molecule imaging revealed that only several monomers, 3-4, oligomerise to form a functional pore. In this model the α-helices and surrounding lipid molecules build toroidal pore. In agreement, AP pores are transient and electrically heterogeneous. On the contrary, crystallized oligomers of actinoporin fragaceatoxin C were found to be composed of eight monomers with no lipids present between the adjacent α-helices. This article is part of a Special Issue entitled: Pore-Forming Toxins edited by Maur Dalla Serra and Franco Gambale.

A pore-forming toxin requires a specific residue for its activity in membranes with particular physicochemical properties

The physicochemical landscape of the bilayer modulates membrane protein function. Actinoporins are a family of potent hemolytic proteins from sea anemones acting at the membrane level. This family of cytolysins preferentially binds to target membranes containing sphingomyelin, where they form lytic pores giving rise to cell death. Although the cytolytic activity of the actinoporin fragaceatoxin C (FraC) is sensitive to vesicles made of various lipid compositions, it is far from clear how this toxin adjusts its mechanism of action to a broad range of physiochemical landscapes. Herein, we show that the conserved residue Phe-16 of FraC is critical for pore formation in cholesterol-rich membranes such as those of red blood cells. The interaction of a panel of muteins of Phe-16 with model membranes composed of raft-like lipid domains is inactivated in cholesterol-rich membranes but not in cholesterol-depleted membranes. These results indicate that actinoporins recognize different membrane environments, resulting in a wider repertoire of susceptible target membranes (and preys) for sea anemones. In addition, this study has unveiled promising candidates for the development of protein-based biosensors highly sensitive to the concentration of cholesterol within the membrane.

Structural basis for self-assembly of a cytolytic pore lined by protein and lipid

Pore-forming toxins (PFT) are water-soluble proteins that possess the remarkable ability to self-assemble on the membrane of target cells, where they form pores causing cell damage. Here, we elucidate the mechanism of action of the haemolytic protein fragaceatoxin C (FraC), a α-barrel PFT, by determining the crystal structures of FraC at four different stages of the lytic mechanism, namely the water-soluble state, the monomeric lipid-bound form, an assembly intermediate and the fully assembled transmembrane pore. The structure of the transmembrane pore exhibits a unique architecture composed of both protein and lipids, with some of the lipids lining the pore wall, acting as assembly cofactors. The pore also exhibits lateral fenestrations that expose the hydrophobic core of the membrane to the aqueous environment. The incorporation of lipids from the target membrane within the structure of the pore provides a membrane-specific trigger for the activation of a haemolytic toxin.

Actinoporins are water-soluble pore-forming toxins that self-assemble in the membranes of target cells. Here, the authors provide insight into the mechanism of membrane pore formation by solving the structures of several states of the hemolytic protein fragaceatoxin C, including the fully assembled pore.

A cholesterol recognition motif in human phospholipid scramblase 1

Human phospholipid scramblase 1 (SCR) catalyzes phospholipid transmembrane (flip-flop) motion. This protein is assumed to bind the membrane hydrophobic core through a transmembrane domain (TMD) as well as via covalently bound palmitoyl residues. Here, we explore the possible interaction of the SCR TMD with cholesterol by using a variety of experimental and computational biophysical approaches. Our findings indicate that SCR contains an amino acid segment at the C-terminal region that shows a remarkable affinity for cholesterol, although it lacks the CRAC sequence. Other 3-OH sterols, but not steroids lacking the 3-OH group, also bind this region of the protein. The newly identified cholesterol-binding region is located partly at the C-terminal portion of the TMD and partly in the first amino acid residues in the SCR C-terminal extracellular coil. This finding could be related to the previously described affinity of SCR for cholesterol-rich domains in membranes.

Biological functions of sphingomyelins

Sphingomyelin (SM) is a dominant sphingolipid in membranes of mammalian cells and this lipid class is specifically enriched in the plasma membrane, the endocytic recycling compartment, and the trans Golgi network. The distribution of SM and cholesterol among cellular compartments correlate. Sphingolipids have extensive hydrogen-bonding capabilities which together with their saturated nature facilitate the formation of sphingolipid and SM-enriched lateral domains in membranes. Cholesterol prefers to interact with SMs and this interaction has many important functional consequences. In this review, the synthesis, regulation, and intracellular distribution of SMs are discussed. The many direct roles played by membrane SM in various cellular functions and processes will also be discussed. These include involvement in the regulation of endocytosis and receptor-mediated ligand uptake, in ion channel and G-protein coupled receptor function, in protein sorting, and functioning as receptor molecules for various bacterial toxins, and for non-bacterial pore-forming toxins. SM is also an important constituent of the eye lens membrane, and is believed to participate in the regulation of various nuclear functions. SM is an independent risk factor in the development of cardiovascular disease, and new studies have shed light on possible mechanism behind its role in atherogenesis.

Pores of the toxin FraC assemble into 2D hexagonal clusters in both crystal structures and model membranes

The recent high-resolution structure of the toxin FraC derived from the sea anemone Actinia fragacea has provided new insight into the mechanism of pore formation by actinoporins. In this work, we report two new crystal forms of FraC in its oligomeric prepore conformation. Together with the previously reported structure, these two new structures reveal that ring-like nonamers of the toxin assemble into compact two-dimensional hexagonal arrays. This supramolecular organization is maintained in different relative orientations adopted by the oligomers within the crystal layers. Analyses of the aggregation of FraC pores in both planar and curved (vesicles) model membranes show similar 2D hexagonal arrangements. Our observations support a model in which hexagonal pore-packing is a clustering mechanism that maximizes toxin-driven membrane damage in the target cell.

The behavior of sea anemone actinoporins at the water-membrane interface

Actinoporins constitute a group of small and basic α-pore forming toxins produced by sea anemones. They display high sequence identity and appear as multigene families. They show a singular behaviour at the water-membrane interface: In aqueous solution, actinoporins remain stably folded but, upon interaction with lipid bilayers, become integral membrane structures. These membranes contain sphingomyelin, display phase coexistence, or both. The water soluble structures of the actinoporins equinatoxin II (EqtII) and sticholysin II (StnII) are known in detail. The crystalline structure of a fragaceatoxin C (FraC) nonamer has been also determined. The three proteins fold as a β-sandwich motif flanked by two α-helices, one of them at the N-terminal end. Four regions seem to be especially important: A cluster of aromatic residues, a phosphocholine binding site, an array of basic amino acids, and the N-terminal α-helix. Initial binding of the soluble monomers to the membrane is accomplished by the cluster of aromatic amino acids, the array of basic residues, and the phosphocholine binding site. Then, the N-terminal α-helix detaches from the β-sandwich, extends, and lies parallel to the membrane. Simultaneously, oligomerization occurs. Finally, the extended N-terminal α-helix penetrates the membrane to build a toroidal pore. This model has been however recently challenged by the cryo-EM reconstruction of FraC bound to phospholipid vesicles. Actinoporins structural fold appears across all eukaryotic kingdoms in other functionally unrelated proteins. Many of these proteins neither bind to lipid membranes nor induce cell lysis. Finally, studies focusing on the therapeutic potential of actinoporins also abound.

Solid-state NMR and simulation studies of equinatoxin II N-terminus interaction with lipid bilayers

The interaction with model membranes of a peptide, EqtII(1-32), corresponding to the N-terminal region of the pore-forming toxin equinatoxin II (EqtII) has been studied using solid-state NMR and molecular dynamics (MD) simulations. The distances between specifically labeled nuclei in [(19)F-para]Phe16-[1-(13)C]Leu19 and [(19)F-para]Phe16-[(15)N]Leu23 analogs of EqtII(1-32) measured by REDOR in lyophilized peptide were in agreement with published crystal and solution structures. However, in both DMPC and mixed DMPC:SM membrane environments, significant changes in the distances between the labeled amino acid pairs were observed, suggesting changes in helical content around the experimentally studied region, 16-23, in the presence of bilayers. (19)F-(31)P REDOR experiments indicated that the aromatic ring of Phe16 is in contact with lipid headgroups in both membrane environments. For the DMPC:SM mixed bilayers, a closer interaction between Phe16 side chains and lipid headgroups was observed, but an increase in distances was observed for both labeled amino acid pairs compared with those measured for EqtII(1-32) in pure DMPC bilayers. The observed differences between DMPC and DMPC:SM bilayers may be due to the greater affinity of EqtII for the latter. MD simulations of EqtII(1-32) in water, on a pure DMPC bilayer, and on a mixed DMPC:SM bilayer indicate significant peptide secondary structural differences in the different environments, with the DMPC-bound peptide adopting helical formations at residues 16-24, whereas the DMPC:SM-bound peptide exhibits a longer helical stretch, which may contribute to its enhanced activity against PC:SM compared with pure PC bilayers. Proteins 2010. (c) 2009 Wiley-Liss, Inc.

Purification, cloning and characterization of fragaceatoxin C, a novel actinoporin from the sea anemone Actinia fragacea

Actinia fragacea is commonly called the "strawberry" anemone because of the distinctive yellow or green spots displayed on its red column. Its venom contains several haemolytic proteins with a molecular mass of approximately 20 kDa that can be separated by ion-exchange column chromatography. One of them was purified to homogeneity and was named fragaceatoxin C (FraC). Its 15 N-terminal residues were identified by Edman degradation and served to obtain its complete DNA coding sequence by RT-PCR. The coding region of FraC was amplified and cloned in the expression vector pBAT-4. Purified recombinant FraC consists of 179 amino acids and multiple sequence alignment with other actinoporins clearly indicates that FraC belongs to this protein family. The secondary structure, thermal stability and lytic activity of native and recombinant FraC were practically identical and exhibit the same basic features already described for equinatoxin-II and sticholysin-II.

Structures of sea anemone toxins

Sea anemones produce a variety of toxic peptides and proteins, including many ion channel blockers and modulators, as well as potent cytolysins. This review describes the structures that have been determined to date for the major classes of peptide and protein toxins. In addition, established and emerging methods for structure determination are summarized and the prospects for modelling newly described toxins are evaluated. In common with most other classes of proteins, toxins display conformational flexibility which may play a role in receptor binding and function. The prospects for obtaining atomic resolution structures of toxins bound to their receptors are also discussed.

Calorimetric scrutiny of lipid binding by sticholysin II toxin mutants

The mechanisms by which pore-forming toxins are able to insert into lipid membranes are a subject of the highest interest in the field of lipid-protein interaction. Eight mutants affecting different regions of sticholysin II, a member of the pore-forming actinoporin family, have been produced, and their hemolytic and lipid-binding properties were compared to those of the wild-type protein. A thermodynamic approach to the mechanism of pore formation is also presented. Isothermal titration calorimetry experiments show that pore formation by sticholysin II is an enthalpy-driven process that occurs with a high affinity constant (1.7x10(8) M(-1)). Results suggest that conformational flexibility at the N-terminus of the protein does not provide higher affinity for the membrane, although it is necessary for correct pore formation. Membrane binding is achieved through two separate mechanisms, that is, recognition of the lipid-water interface by a cluster of aromatic residues and additional specific interactions that include a phosphocholine-binding site. Thermodynamic parameters derived from titration experiments are discussed in terms of a putative model for pore formation.

The effects of lipids on the structure of the eukaryotic cytolysin equinatoxin II: a synchrotron radiation circular dichroism spectroscopic study

Synchrotron radiation circular dichroism (SRCD) spectroscopy studies of the eukaryotic pore-forming protein equinatoxin II (EqtII) were carried out in solution and in the presence of micelles or small unilamellar vesicles (SUV) of different lipid composition. The SRCD structural data was correlated with calcein leakage from SUV and with partitioning of EqtII to liposomes, and micelles, according to haemolysis assays. The structure of EqtII in water and dodecylphosphocholine micelles as determined by SRCD was similar to the values calculated from crystal and solution structures of the protein, and no changes were observed with the addition of sphingomyelin (SM). SM is required to trigger pore formation in biological and model membranes, but our results suggest that SM alone is not sufficient to trigger dissociation of the N-terminal helix and further structural rearrangements required to produce a pore. Significant changes in conformation of EqtII were detected with unsaturated phospholipid (DOPC) vesicles when SM was added, but not with saturated phospholipids (DMPC), which suggests that not only is membrane curvature important, but also the fluidity of the bilayer. The SRCD data indicated that the EqtII structure in the presence of DOPC:SM SUV represents the 'bound' state and the 'free' state is represented by spectra for DOPC or DOPC:Chol vesicles, which correlates with the high lytic activity for SUV of DOPC:SM. The SRCD results provide insight into the lipid requirements for structural rearrangements associated with EqtII toxicity and lysis.

Equinatoxin II permeabilizing activity depends on the presence of sphingomyelin and lipid phase coexistence

Equinatoxin II is a pore-forming protein of the actinoporin family. After membrane binding, it inserts its N-terminal alpha-helix and forms a protein/lipid pore. Equinatoxin II activity depends on the presence of sphingomyelin in the target membrane; however, the role of this specificity is unknown. On the other hand, sphingomyelin is considered an essential ingredient of lipid rafts and promotes liquid-ordered/liquid-disordered phase separation in model membranes that mimic raft composition. Here, we used giant unilamellar vesicles to simultaneously investigate the effect of sphingomyelin and phase separation on the membrane binding and permeabilizing activity of Equinatoxin II. Our results show that Equinatoxin II binds preferentially to the liquid-ordered phase over the liquid-disordered one and that it tends to concentrate at domain interfaces. In addition, sphingomyelin strongly enhances membrane binding of the toxin but is not sufficient for membrane permeabilization. Under the same experimental conditions, Equinatoxin II formed pores in giant unilamellar vesicles containing sphingomyelin only when liquid-ordered and -disordered phases coexisted. Our observations demonstrate the importance of phase boundaries for Equinatoxin II activity and suggest a double role of sphingomyelin as a specific receptor for the toxin and as a promoter of the membrane organization necessary for Equinatoxin II action.

Membranes: a meeting point for lipids, proteins and therapies

Membranes constitute a meeting point for lipids and proteins. Not only do they define the entity of cells and cytosolic organelles but they also display a wide variety of important functions previously ascribed to the activity of proteins alone. Indeed, lipids have commonly been considered a mere support for the transient or permanent association of membrane proteins, while acting as a selective cell/organelle barrier. However, mounting evidence demonstrates that lipids themselves regulate the location and activity of many membrane proteins, as well as defining membrane microdomains that serve as spatio-temporal platforms for interacting signalling proteins. Membrane lipids are crucial in the fission and fusion of lipid bilayers and they also act as sensors to control environmental or physiological conditions. Lipids and lipid structures participate directly as messengers or regulators of signal transduction. Moreover, their alteration has been associated with the development of numerous diseases. Proteins can interact with membranes through lipid co-/post-translational modifications, and electrostatic and hydrophobic interactions, van der Waals forces and hydrogen bonding are all involved in the associations among membrane proteins and lipids. The present study reviews these interactions from the molecular and biomedical point of view, and the effects of their modulation on the physiological activity of cells, the aetiology of human diseases and the design of clinical drugs. In fact, the influence of lipids on protein function is reflected in the possibility to use these molecular species as targets for therapies against cancer, obesity, neurodegenerative disorders, cardiovascular pathologies and other diseases, using a new approach called membrane-lipid therapy.

Infrared spectroscopy study on the conformational changes leading to pore formation of the toxin sticholysin II

The structure of the actinoporin sticholysin II (StnII) in the pore state was investigated by Fourier transform infrared spectroscopy in the attenuated total reflection configuration. 1-Palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine/cholesterol unilamellar vesicles were employed. The alpha-helix content increases in approximately 30% upon lipid binding, which agrees with an extension of eight or nine residues at the N-terminal helix. Furthermore, analyses of dichroic spectra show that the extended N-terminal helix would have a 31 degrees tilt with respect to the membrane normal. The orientation of the central beta-sandwich was also estimated. In addition, it was detected that StnII alters the orientation of the lipid acyl chains. (1)H/(2)H exchange experiments sustain a mainly superficial interaction between StnII and the membrane, with no protection of the beta-sandwich. The implications of the results in the mechanism of pore formation are discussed.

Effect of sphingomyelin and cholesterol on the interaction of St II with lipidic interfaces

Sticholysin II (St II) is a cytolysin produced by the sea anemone Stichodactyla helianthus, characterized by forming oligomeric pores in natural and artificial membranes. In the present work the influence of the membrane lipidic components sphingomyelin (SM) and cholesterol (Cho) on binding and functional activity of St II, was evaluated using ELISA, lipid monolayers and liposomes. The aim of this work was to establish the promoting role of Cho and SM, both in St II binding and pore formation efficiency. In general the association (evaluated by ELISA and incorporation to phospholipid monolayers) of St II to lipids mixtures was better than to any one of the single components. Regarding the unique role of SM, it was found that, albeit inefficiently, St II binds to phosphatidylcholine (PC):Cho monolayers and liposomes, and is able to form active pores in these bilayers. The results in monolayers and liposomes show that the presence of SM and large amounts of Cho leads to the highest values of critical pressure and rate of association to monolayers, the most favorable interaction with liposomes, and the fastest rate of pore formation, in spite of the rigidity of the layers as suggested by the high generalized polarization (GP) of Laurdan incorporated to liposomes and FTIR data. Taken together, the present results show that the joint presence of SM and Cho, both in binary and ternary (PC containing) mixtures provide conditions particularly suitable for St II binding and function. We suggest that microdomains present in the bilayers could be important for toxin-membrane association.