Measurement of membrane binding between recoverin, a calcium-myristoyl switch protein, and lipid bilayers by AFM-based force spectroscopy

Chain-Length Dependence of Peptide-Lipid Bilayer Interaction Strength and Binding Kinetics: A Combined Theoretical and Experimental Approach

Physical interactions between polypeptide chains and lipid membranes underlie critical cellular processes. Yet, despite fundamental importance, key mechanistic aspects of these interactions remain elusive. Bulk experiments have revealed a linear relationship between free energy and peptide chain length in a model system, but does this linearity extend to the interaction strength and to the kinetics of lipid binding? To address these questions, we utilized a combination of coarse-grained molecular dynamics (CG MD) simulations, analytical modeling, and atomic force microscopy (AFM)-based single molecule force spectroscopy. Following previous bulk experiments, we focused on interactions between short hydrophobic peptides (WLn, n = 1, ..., 5) with 1-palmitoyl-2-oleoyl-glycero-3-phosphocholine (POPC) bilayers, a simple system that probes peptide primary structure effects. Potentials of mean force extracted from CG MD recapitulated the linearity of free energy with the chain length. Simulation results were quantitatively connected to bulk biochemical experiments via a single scaling factor of order unity, corroborating the methodology. Additionally, CG MD revealed an increase in the distance to the transition state, a result that weakens the dependence of the dissociation force on the peptide chain length. AFM experiments elucidated rupture force distributions and, through modeling, intrinsic dissociation rates. Taken together, the analysis indicates a rupture force plateau in the WLn-POPC system, suggesting that the final rupture event involves the last 2 or 3 residues. In contrast, the linear dependence on chain length was preserved in the intrinsic dissociation rate. This study advances the understanding of peptide-lipid interactions and provides potentially useful insights for the design of peptides with tailored membrane-interacting properties.

Investigating the Effect of Tyrosine Kinase Inhibitors on the Interaction between Human Serum Albumin by Atomic Force Microscopy

It is important for elucidating the regulation mechanism of life activities, as well as for the prevention, diagnosis, and drug design of diseases, to study protein–protein interactions (PPIs). Here, we investigated the interactions of human serum albumin (HSA) in the presence of tyrosine kinase inhibitors (TKIs: imatinib, nilotinib, dasatinib, bosutinib, and ponatinib) using atomic force microscopy (AFM). The distribution of rupture events including the specific interaction force F_i and the non-specific interaction force F₀ between HSA pairs was analyzed. Based on the force measurements, F_i and F₀ between HSA pairs in the control experiment were calculated to be 47 ± 1.5 and 116.1 ± 1.3 pN. However, F_i was significantly decreased in TKIs, while F₀ was slightly decreased. By measuring the rupture forces at various loading rates and according to the Bell equation, the kinetic parameters of the complexes were investigated in greater detail. Molecular docking was used as a complementary means by which to explore the force of this effect. The whole measurements indicated that TKIs influenced PPIs in a variety of ways, among which hydrogen bonding and hydrophobic interactions were the most important. In conclusion, these outcomes give us a better insight into the mechanisms of PPIs when there are exogenous compounds present as well as in different liquid environments.

Mechanical force can enhance c-Src kinase activity by impairing autoinhibition

Cellular mechanosensing is pivotal for virtually all biological processes, and many molecular mechano-sensors and their way of function are being uncovered. In this work, we suggest that c-Src kinase acts as a direct mechano-sensor. c-Src is responsible for, among others, cell proliferation, and shows increased activity in stretched cells. In its native state, c-Src has little basal activity, because its kinase domain binds to an SH2 and SH3 domain. However, it is known that c-Src can bind to p130Cas, through which force can be transmitted to the membrane. Using molecular dynamics simulations, we show that force acting between the membrane-bound N-terminus of the SH3 domain and p130Cas induces partial SH3 unfolding, thereby impeding rebinding of the kinase domain onto SH2/SH3 and effectively enhancing kinase activity. Forces involved in this process are slightly lower or similar to the forces required to pull out c-Src from the membrane through the myristoyl linker, and key interactions involved in this anchoring are salt bridges between negative lipids and nearby basic residues in c-Src. Thus, c-Src appears to be a candidate for an intriguing mechanosensing mechanism of impaired kinase inhibition, which can be potentially tuned by membrane composition and other environmental factors.

Towards a Quantitative Understanding of Protein-Lipid Bilayer Interactions at the Single Molecule Level: Opportunities and Challenges

Protein-lipid interfaces are among the most fundamental in biology. Yet applying conventional techniques to study the biophysical attributes of these systems is challenging and has left many unknowns. For example, what is the kinetic pathway and energy landscape experienced by a polypeptide chain when in close proximity to a fluid lipid bilayer? Here we review the experimental and theoretical progress we have made in addressing this question from a single molecule perspective. Some remaining impediments are also discussed.

Characterizing the Locus of a Peripheral Membrane Protein-Lipid Bilayer Interaction Underlying Protein Export Activity in E. coli

Quantitative characterization of the strength of peripheral membrane protein-lipid bilayer interactions is fundamental in the understanding of many protein targeting pathways. SecA is a peripheral membrane protein that plays a central role in translocating precursor proteins across the inner membrane of E. coli. The membrane binding activity of the extreme N-terminus of SecA is critical for translocase function. Yet, the mechanical strength of the interaction and the kinetic pathways that this segment of SecA experiences when in proximity of an E. coli polar lipid bilayer has not been characterized. We directly measured the N-terminal SecA-lipid bilayer interaction using precision single molecule atomic force microscope (AFM)-based dynamic force spectroscopy. To provide conformational data inaccessible to AFM, we also performed all-atom molecular dynamics simulations and circular dichroism measurements. The N-terminal 10 amino acids of SecA have little secondary structure when bound to zwitterionic lipid head groups, but secondary structure, which rigidifies the lipid-bound protein segment, emerges when negatively charged lipids are present. Analysis of the single molecule protein-lipid dissociation data converged to a well-defined lipid-bound-state lifetime in the absence of force, τ₀^lipid = 0.9 s, which is well separated from and longer than the fundamental time scale of the secretion process, defined as the time required to translocate a single amino acid residue (∼50 ms). This value of τ₀^lipid is likely to represent a lower limit of the in vivo membrane-bound lifetime due to factors including the minimal system employed here.

The Binding Properties and Physiological Functions of Recoverin

Recoverin (Rcv) is a low molecular-weight, neuronal calcium sensor (NCS) primarily located in photoreceptor outer segments of the vertebrate retina. Calcium ions (Ca²⁺)-bound Rcv has been proposed to inhibit G-protein-coupled receptor kinase (GRKs) in darkness. During the light response, the Ca²⁺-free Rcv releases GRK, which in turn phosphorylates visual pigment, ultimately leading to the cessation of the visual transduction cascade. Technological advances over the last decade have contributed significantly to a deeper understanding of Rcv function. These include both biophysical and biochemical approaches that will be discussed in this review article. Furthermore, electrophysiological experiments uncovered additional functions of Rcv, such as regulation of the lifetime of Phosphodiesterase-Transducin complex. Recently, attention has been drawn to different roles in rod and cone photoreceptors.This review article focuses on Rcv binding properties to Ca²⁺, disc membrane and GRK, and its physiological functions in phototransduction and signal transmission.

Binding of a Myristoylated Protein to the Lipid Membrane Influenced by Interactions with the Polar Head Group Region

Many cytoplasmic proteins contain a hydrophobic acyl chain, which facilitates protein binding to cell membranes. Hydrophobic interactions between the exposed acyl chain of the protein and hydrocarbon chains of lipids in the cell membrane are the driving force for this specific lipid-protein interaction. Recent studies point out that in addition to hydrophobic interactions the charge-charge and charge-dipole interactions between the polar head groups and basic amino acids contribute significantly to the binding process. Recoverin possesses a myristoyl chain at the N-terminus. In the presence of Ca²⁺ ions, the protein undergoes structural rearrangements, leading to the extrusion of the myristoyl chain, facilitating the protein binding to the membrane. In this work, we investigate the impact of interactions between the polar head group region of lipid molecules and recoverin which binds to the model membrane. The interaction with a planar lipid bilayer composed of phosphatidylcholine and cholesterol with myristoylated and nonmyristoylated recoverin is studied by in situ polarization modulation infrared reflection absorption spectroscopy. The binding of recoverin to the lipid bilayer depends on the transmembrane potential, indicating that the orientation of the permanent surface dipole in the supramolecular assembly of the lipid membrane influences the protein attachment to the membrane surface. Analysis of the amide I' mode indicates that the orientation of recoverin bound to the lipid bilayer is independent of the presence of myristoyl chain in the protein and of the folding of the protein into the tense or relaxed state. In contrast, it changes as a function of the membrane potential. At positive transmembrane potentials, the α-helical fragments of recoverin are oriented predominantly parallel to the bilayer surface. This orientation facilitates the insertion of the acyl chain of the protein into the hydrophobic region of the bilayer. At negative transmembrane potentials, the α-helical fragments of recoverin change their orientation with respect to the membrane surface, which is followed by the removal of the myristoyl chain from the membrane.

Impact of the protein myristoylation on the structure of a model cell membrane in a protein bound state

The neuronal calcium sensor protein recoverin is expressed in retinal rod and cone cells and is involved in the calcium-dependent control of receptor (rhodopsin) phosphorylation and receptor inactivation. In its Ca²⁺-saturated form recoverin is attached to membranes by an exposed myristoyl group and responds to oscillating changes of intracellular Ca²⁺-concentration by performing a so-called Ca²⁺-myristoyl switch. In this work we analyze changes in a liquid lipid bilayer interacting with myristoylated and non-myristoylated recoverin by employing polarization modulation infrared reflection absorption spectroscopy (PM IRRAS) with electrochemical control. The lipid bilayer is transferred onto a polycrystalline gold electrode using Langmuir-Blodgett Langmuir-Schaefer transfer at the surface pressure π = 30 mN m^-1 which ensures, necessary for the lipid-protein interaction, liquid state of the hydrocarbon chains of phospholipids. The model lipid bilayers are adsorbed directly on the Au electrode surface at transmembrane potentials -0.2 < ∆ϕM|S < 0.25 V. The interaction with recoverin leads to a stabilization of the adsorbed state of the lipid bilayer at positive transmembrane potentials. The interaction leads to a decrease in the surface charge density that accumulates on the membrane covered electrode surface, indicating changes in the lateral interactions in the lipid membrane. In situ spectroelectrochemical studies confirm orientation changes in the hydrophobic environment of the model membrane. Insertion of the myristoyl group of recoverin into the membrane is connected with an increase in the tilt of the hydrocarbon chains with respect to the surface normal and decrease in the bilayer thickness. Potential-induced pore formation and desorption of the lipid bilayer from the membrane surface is accompanied by the removal of the acyl chains of recoverin from the membrane.

Protein Lipidation: Occurrence, Mechanisms, Biological Functions, and Enabling Technologies

Protein lipidation, including cysteine prenylation, N-terminal glycine myristoylation, cysteine palmitoylation, and serine and lysine fatty acylation, occurs in many proteins in eukaryotic cells and regulates numerous biological pathways, such as membrane trafficking, protein secretion, signal transduction, and apoptosis. We provide a comprehensive review of protein lipidation, including descriptions of proteins known to be modified and the functions of the modifications, the enzymes that control them, and the tools and technologies developed to study them. We also highlight key questions about protein lipidation that remain to be answered, the challenges associated with answering such questions, and possible solutions to overcome these challenges.

High-Resolution AFM-Based Force Spectroscopy

Atomic force microscopy (AFM)-based force spectroscopy is a powerful technique which has seen significant enhancements in both force and time resolution in recent years. This chapter details two AFM cantilever modification procedures that yield high force precision over different temporal bandwidths. Specifically, it explains a fairly straightforward method to achieve sub-pN force precision and stability at low frequencies (<50 Hz) by removing the metal coatings from a commercially available cantilever. A more involved procedure utilizing a focused ion beam milling machine is required to maintain high force precision at enhanced bandwidths. Both modification methods allow site-specific attachment of biomolecules onto the apex area of the tips for force spectroscopy. The chapter concludes with a comparative demonstration using the two cantilever modification methods to study a lipid-protein interaction.

Membrane Binding of Recoverin: From Mechanistic Understanding to Biological Functionality

Recoverin is a neuronal calcium sensor involved in vision adaptation that reversibly associates with cellular membranes via its calcium-activated myristoyl switch. While experimental evidence shows that the myristoyl group significantly enhances membrane affinity of this protein, molecular details of the binding process are still under debate. Here, we present results of extensive molecular dynamics simulations of recoverin in the proximity of a phospholipid bilayer. We capture multiple events of spontaneous membrane insertion of the myristoyl moiety and confirm its critical role in the membrane binding. Moreover, we observe that the binding strongly depends on the conformation of the N-terminal domain. We propose that a suitable conformation of the N-terminal domain can be stabilized by the disordered C-terminal segment or by binding of the target enzyme, i.e., rhodopsin kinase. Finally, we find that the presence of negatively charged lipids in the bilayer stabilizes a physiologically functional orientation of the membrane-bound recoverin.

Single-Molecule Peptide-Lipid Affinity Assay Reveals Interplay between Solution Structure and Partitioning

Interactions between short protein segments and phospholipid bilayers dictate fundamental aspects of cellular activity and have important applications in biotechnology. Yet, the lack of a suitable methodology for directly probing these interactions has hindered the mechanistic understanding. We developed a precision atomic force microscopy-based single-molecule force spectroscopy assay and probed partitioning into lipid bilayers by measuring the mechanical force experienced by a peptide. Protein segments were constructed from the peripheral membrane protein SecA, a key ATPase in bacterial secretion. We focused on the first 10 amino-terminal residues of SecA (SecA2-11) that are lipophilic. In addition to the core SecA2-11 sequence, constructs with nearly identical chemical composition but with differing geometry were used: two copies of SecA2-11 linked in series and two copies SecA2-11 linked in parallel. Lipid bilayer partitioning interactions of peptides with differing structures were distinguished. To model the energetic landscape, a theory of diffusive barrier crossing was extended to incorporate a superposition of potential barriers with variable weights. Analysis revealed two dissociation pathways for the core SecA2-11 sequence with well-separated intrinsic dissociation rates. Molecular dynamics simulations showed that the three peptides had significant conformational differences in solution that correlated well with the measured variations in the propensity to partition into the bilayer. The methodology is generalizable and can be applied to other peptide and lipid species.

Site-specific fluorescent labeling to visualize membrane translocation of a myristoyl switch protein

Fluorescence approaches have been widely used for elucidating the dynamics of protein-membrane interactions in cells and model systems. However, non-specific multi-site fluorescent labeling often results in a loss of native structure and function, and single cysteine labeling is not feasible when native cysteines are required to support a protein's folding or catalytic activity. Here, we develop a method using genetic incorporation of non-natural amino acids and bio-orthogonal chemistry to site-specifically label with a single fluorescent small molecule or protein the myristoyl-switch protein recoverin, which is involved in rhodopsin-mediated signaling in mammalian visual sensory neurons. We demonstrate reversible Ca(2+)-responsive translocation of labeled recoverin to membranes and show that recoverin favors membranes with negative curvature and high lipid fluidity in complex heterogeneous membranes, which confers spatio-temporal control over down-stream signaling events. The site-specific orthogonal labeling technique is promising for structural, dynamical, and functional studies of many lipid-anchored membrane protein switches.

Membrane binding of Neuronal Calcium Sensor-1 (NCS1)

Neuronal Calcium Sensor-1 (NCS1) belongs to the family of Neuronal Calcium Sensor (NCS) proteins. NCS1 is composed of four EF-hand motifs and an N-terminal myristoylation. However, the presence of a calcium-myristoyl switch in NCS1 and its role in the membrane binding are controversial. The model of Langmuir lipid monolayers is thus used to mimic the cell membrane in order to characterize the membrane interactions of NCS1. Two binding parameters are calculated from monolayer measurements: the maximum insertion pressure, up to which protein binding is energetically favorable, and the synergy, reporting attractive or repulsive interactions with the lipid monolayers. Binding membrane measurements performed in the presence of myristoylated NCS1 reveal better binding interactions for phospholipids composed of phosphoethanolamine polar head groups and unsaturated fatty acyl chains. In the absence of calcium, the membrane binding measurements are drastically modified and suggest that the protein is more strongly bound to the membrane. Indeed, the binding of calcium by three EF-hand motifs of NCS1 leads to a conformation change. NCS1 arrangement at the membrane could thus be reshuffled for better interactions with its substrates. The N-terminal peptide of NCS1 is composed of two amphiphilic helices involved in the membrane interactions of NCS1. Moreover, the presence of the myristoyl group has a weak influence on the membrane binding of NCS1 suggesting the absence of a calcium-myristoyl switch mechanism in this protein. The myristoylation could thus have a structural role required in the folding/unfolding of NCS1 which is essential to its multiple biological functions.

Surface-charge differentiation of streptavidin and avidin by atomic force microscopy-force spectroscopy

Chemical information can be obtained by using atomic force microscopy (AFM) and force spectroscopy (FS) with atomic or molecular resolution, even in liquid media. The aim of this paper is to demonstrate that single molecules of avidin and streptavidin anchored to a biotinylated bilayer can be differentiated by using AFM, even though AFM topographical images of the two proteins are remarkably alike. At physiological pH, the basic glycoprotein avidin is positively charged, whereas streptavidin is a neutral protein. This charge difference can be determined with AFM, which can probe electrostatic double-layer forces by using FS. The force curves, owing to the electrostatic interaction, show major differences when measured on top of each protein as well as on the lipid substrate. FS data show that the two proteins are negatively charged. Nevertheless, avidin and streptavidin can be clearly distinguished, thus demonstrating the sensitivity of AFM to detect small changes in the charge state of macromolecules.

Ca2+ binding enhanced mechanical stability of an archaeal crystallin

Structural topology plays an important role in protein mechanical stability. Proteins with β-sandwich topology consisting of Greek key structural motifs, for example, I27 of muscle titin and ¹⁰FNIII of fibronectin, are mechanically resistant as shown by single-molecule force spectroscopy (SMFS). In proteins with β-sandwich topology, if the terminal strands are directly connected by backbone H-bonding then this geometry can serve as a “mechanical clamp”. Proteins with this geometry are shown to have very high unfolding forces. Here, we set out to explore the mechanical properties of a protein, M-crystallin, which belongs to β-sandwich topology consisting of Greek key motifs but its overall structure lacks the “mechanical clamp” geometry at the termini. M-crystallin is a Ca²⁺ binding protein from Methanosarcina acetivorans that is evolutionarily related to the vertebrate eye lens β and γ-crystallins. We constructed an octamer of crystallin, (M-crystallin)₈, and using SMFS, we show that M-crystallin unfolds in a two-state manner with an unfolding force ∼90 pN (at a pulling speed of 1000 nm/sec), which is much lower than that of I27. Our study highlights that the β-sandwich topology proteins with a different strand-connectivity than that of I27 and ¹⁰FNIII, as well as lacking “mechanical clamp” geometry, can be mechanically resistant. Furthermore, Ca²⁺ binding not only stabilizes M-crystallin by 11.4 kcal/mol but also increases its unfolding force by ∼35 pN at the same pulling speed. The differences in the mechanical properties of apo and holo M-crystallins are further characterized using pulling speed dependent measurements and they show that Ca²⁺ binding reduces the unfolding potential width from 0.55 nm to 0.38 nm. These results are explained using a simple two-state unfolding energy landscape.

Single-molecule dissection of the high-affinity cohesin-dockerin complex

Cellulose-degrading enzyme systems are of significant interest from both a scientific and technological perspective due to the diversity of cellulase families, their unique assembly and substrate binding mechanisms, and their potential applications in several key industrial sectors, notably cellulose hydrolysis for second-generation biofuel production. Particularly fascinating are cellulosomes, the multimodular extracellular complexes produced by numerous anaerobic bacteria. Using single-molecule force spectroscopy, we analyzed the mechanical stability of the intermolecular interfaces between the cohesin and the dockerin modules responsible for self-assembly of the cellulosomal components into the multienzyme complex. The observed cohesin-dockerin rupture forces (>120 pN) are among the highest reported for a receptor-ligand system to date. Using an atomic force microscope protocol that quantified single-molecule binding activity, we observed force-induced dissociation of calcium ions from the duplicated loop-helix F-hand motif located within the dockerin module, which in the presence of EDTA resulted in loss of affinity to the cohesin partner. A cohesin amino acid mutation (D39A) that eliminated hydrogen bonding with the dockerin's critically conserved serine residues reduced the observed rupture forces. Consequently, no calcium loss occurred and dockerin activity was maintained throughout multiple forced dissociation events. These results offer insights at the single-molecule level into the stability and folding of an exquisite class of high-affinity protein-protein interactions that dictate fabrication and architecture of cellulose-degrading molecular machines.

Unbinding forces of single pertussis toxin-antibody complexes measured by atomic force spectroscopy correlate with their dissociation rates determined by surface plasmon resonance

An inactivated form of pertussis toxin (PTX) is the primary component of currently available acellular vaccines against Bordetella pertussis, the causative agent of whooping cough. The PTX analyzed here is purified at industrial scale and is subsequently inactivated using glutaraldehyde. The influence of this treatment on antibody recognition is of crucial importance and is analyzed in this study. Surface plasmon resonance (SPR) experiments using PTX and its inactivated form (toxoid) with 10 different monoclonal antibodies were conducted. PTX was found to recognize the antibodies with an average affinity of 1.34 ± 0.50 nM, and chemical inactivation caused only a modest decrease in affinity by a factor of approximately 4.5. However, glutaraldehyde treatment had contrary effects on the kinetic association constant k(a) and the dissociation constant k(d) . A significant reduction in k(a) was observed, whereas the dissociation of the toxoid from the bound antibody occurred slower than PTX. These data indicate that the chemical inactivation of PTX not only reduces the velocity of antibody recognition but also stabilizes the interaction with antibodies as shown by a reduction in k(d) . The same interactions were also studied by dynamic force spectroscopy (DFS). Data reveal a correlation between the k(d) values determined by SPR and the mean unbinding force as measured by DFS. The unbinding forces of one complex were determined as a function of the loading rate to directly estimate the k(d) value. Several interactions were impossible to be analyzed using SPR because of ultratight binding. Using DFS, the unbinding forces of these interactions were determined, which in turn could be used to estimate k(d) values. The use of DFS as a technique to study ultratight binding is discussed.

Dengue virus capsid protein binding to hepatic lipid droplets (LD) is potassium ion dependent and is mediated by LD surface proteins

Dengue virus (DENV) affects millions of people, causing more than 20,000 deaths annually. No effective treatment for the disease caused by DENV infection is currently available, partially due to the lack of knowledge on the basic aspects of the viral life cycle, including the molecular basis of the interaction between viral components and cellular compartments. Here, we characterized the properties of the interaction between the DENV capsid (C) protein and hepatic lipid droplets (LDs), which was recently shown to be essential for the virus replication cycle. Zeta potential analysis revealed a negative surface charge of LDs, with an average surface charge of -19 mV. The titration of LDs with C protein led to an increase of the surface charge, which reached a plateau at +13.7 mV, suggesting that the viral protein-LD interaction exposes the protein cationic surface to the aqueous environment. Atomic force microscopy (AFM)-based force spectroscopy measurements were performed by using C protein-functionalized AFM tips. The C protein-LD interaction was found to be strong, with a single (un)binding force of 33.6 pN. This binding was dependent on high intracellular concentrations of potassium ions but not sodium. The inhibition of Na(+)/K(+)-ATPase in DENV-infected cells resulted in the dissociation of C protein from LDs and a 50-fold inhibition of infectious virus production but not of RNA replication, indicating a biological relevance for the potassium-dependent interaction. Limited proteolysis of the LD surface impaired the C protein-LD interaction, and force measurements in the presence of specific antibodies indicated that perilipin 3 (TIP47) is the major DENV C protein ligand on the surface of LDs.

Linking of sensor molecules with amino groups to amino-functionalized AFM tips

The measuring tip of an atomic force microscope (AFM) can be upgraded to a specific biosensor by attaching one or a few biomolecules to the apex of the tip. The biofunctionalized tip is then used to map cognate target molecules on a sample surface or to study biophysical parameters of interaction with the target molecules. The functionality of tip-bound sensor molecules is greatly enhanced if they are linked via a thin, flexible polymer chain. In a typical scheme of tip functionalization, reactive groups are first generated on the tip surface, a bifunctional cross-linker is then attached with one of its two reactive ends, and finally the probe molecule of interest is coupled to the free end of the cross-linker. Unfortunately, the most popular functional group generated on the tip surface is the amino group, while at the same time, the only useful coupling functions of many biomolecules (such as antibodies) are also NH₂ groups. In the past, various tricks or detours were applied to minimize the undesired bivalent reaction of bifunctional linkers with adjacent NH₂ groups on the tip surface. In the present study, an uncompromising solution to this problem was found with the help of a new cross-linker (“acetal-PEG-NHS”) which possesses one activated carboxyl group and one acetal-protected benzaldehyde function. The activated carboxyl ensures rapid unilateral attachment to the amino-functionalized tip, and only then is the terminal acetal group converted into the amino-reactive benzaldehyde function by mild treatment (1% citric acid, 1–10 min) which does not harm the AFM tip. As an exception, AFM tips with magnetic coating become demagnetized in 1% citric acid. This problem was solved by deprotecting the acetal group before coupling the PEG linker to the AFM tip. Bivalent binding of the corresponding linker (“aldehyde-PEG-NHS”) to adjacent NH₂ groups on the tip was largely suppressed by high linker concentrations. In this way, magnetic AFM tips could be functionalized with an ethylene diamine derivative of ATP which showed specific interaction with mitochondrial uncoupling protein 1 (UCP1) that had been purified and reconstituted in a mica-supported planar lipid bilayer.

Analysis of the contribution of saturated and polyunsaturated phospholipid monolayers to the binding of proteins

The binding of peripheral proteins to membranes results in different biological effects. The large diversity of membrane lipids is thought to modulate the activity of these proteins. However, information on the selective binding of peripheral proteins to membrane lipids is still largely lacking. Lipid monolayers at the air/water interface are useful model membrane systems for studying the parameters responsible for peripheral protein membrane binding. We have thus measured the maximum insertion pressure (MIP) of two proteins from the photoreceptors, Retinitis pigmentosa 2 (RP2) and recoverin, to estimate their binding to lipid monolayers. Photoreceptor membranes have the unique characteristic that more than 60% of their fatty acids are polyunsaturated, making them the most unsaturated natural membranes known to date. These membranes are also thought to contain significant amounts of saturated phospholipids. MIPs of RP2 and recoverin have thus been measured in the presence of saturated and polyunsaturated phospholipids. MIPs higher than the estimated lateral pressure of biomembranes have been obtained only with a saturated phospholipid for RP2 and with a polyunsaturated phospholipid for recoverin. A new approach was then devised to analyze these data properly. In particular, a parameter called the synergy factor allowed us to highlight the specificity of RP2 for saturated phospholipids and recoverin for polyunsaturated phospholipids as well as to demonstrate clearly the preference of RP2 for saturated phospholipids that are known to be located in microdomains.

The applications of atomic force microscopy to vision science

The atomic force microscope (AFM) is widely used in materials science and has found many applications in biological sciences but has been limited in use in vision science. The AFM can be used to image the topography of soft biological materials in their native environments. It can also be used to probe the mechanical properties of cells and extracellular matrices, including their intrinsic elastic modulus and receptor-ligand interactions. In this review, the operation of the AFM is described along with a review of how it has been thus far used in vision science. It is hoped that this review will serve to stimulate vision scientists to consider incorporating AFM as part of their research toolkit.

A review on: atomic force microscopy applied to nano-mechanics of the cell

Since its introduction in 1986, AFM has been applied to biological studies along with its widespread use in physics, chemistry and engineering fields. Due to its dual capabilities of imaging nano-materials with an atomic level resolution and of directly manipulating samples with high precision, AFM is now considered an indispensable instrument for nano-technological researchers especially in physically oriented fields. In biology in general, however, and in biotechnology in particular, its usefulness must be critically examined and, if necessary as it certainly is, further explored from a practical point of view. In this review, a new trend of applying AFM based technology to elucidate the mechanical basis of the cellular structure and its interaction with the extracellular matrix including cell to cell interaction is reviewed. Some of the recent studies done by using other force measuring or force exerting methods are also covered in the hope that all the nano-mechanical work on the cellular level will eventually contribute to the emergence of the mechano-chemical view of the cell in a unified manner.

Evolution of vertebrate rod and cone phototransduction genes

Vertebrate cones and rods in several cases use separate but related components for their signal transduction (opsins, G-proteins, ion channels, etc.). Some of these proteins are also used differentially in other cell types in the retina. Because cones, rods and other retinal cell types originated in early vertebrate evolution, it is of interest to see if their specific genes arose in the extensive gene duplications that took place in the ancestor of the jawed vertebrates (gnathostomes) by two tetraploidizations (genome doublings). The ancestor of teleost fishes subsequently underwent a third tetraploidization. Our previously reported analyses showed that several gene families in the vertebrate visual phototransduction cascade received new members in the basal tetraploidizations. We here expand these data with studies of additional gene families and vertebrate species. We conclude that no less than 10 of the 13 studied phototransduction gene families received additional members in the two basal vertebrate tetraploidizations. Also the remaining three families seem to have undergone duplications during the same time period but it is unclear if this happened as a result of the tetraploidizations. The implications of the many early vertebrate gene duplications for functional specialization of specific retinal cell types, particularly cones and rods, are discussed.

Cellular uptake of cationic gadolinium-DOTA peptide conjugates with and without N-terminal myristoylation

Cellular and nuclear uptake of dual labelled conjugates could be of great value for chemotherapy and cancer diagnostics. Therefore we designed conjugates in which gadolinium (Gd)-1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid (DOTA), a contrast agent for magnetic resonance imaging and fluorescein isothiocyanate (FITC), a fluorescence marker were coupled to membrane translocation sequences (MTS). The MTSs we employed were the third helix of the Antennapedia homeodomain, the HIV-1 Tat peptide and the N-myristoylated HIV-1 Tat peptide. We used confocal laser scanning microscopy, fluorescence activated cell sorting, magnetic resonance imaging (MRI) and viability tests to examine the cellular and nuclear uptake of these conjugates into U373 glioma cells, as well as their cytotoxic effects. We found that the Antennapedia conjugate was taken up by no more than 20% of the cells. The HIV-1 Tat conjugate showed even lower uptake into less than 3% of cells. Interestingly, N-myristoylation of the HIV-1 Tat conjugate drastically improved its cellular uptake. Up to 70% of cells showed cellular and nuclear uptake of the N-myristoylated HIV-1 Tat conjugate. Conjugate cytotoxicity appears to correlate with cellular uptake.

Membrane binding of the neuronal calcium sensor recoverin - modulatory role of the charged carboxy-terminus

BACKGROUND

The Ca2+-binding protein recoverin operates as a Ca2+-sensor in vertebrate photoreceptor cells. It undergoes a so-called Ca2+-myristoyl switch when cytoplasmic Ca2+-concentrations fluctuate in the cell. Its covalently attached myristoyl-group is exposed at high Ca2+-concentrations and enables recoverin to associate with lipid bilayers and to inhibit its target rhodopsin kinase. At low Ca2+-concentrations the myristoyl group is inserted into a hydrophobic pocket of recoverin thereby relieving inhibitory constraint on rhodopsin kinase. Hydrophobic and electrostatic interactions of recoverin with membranes have not been clearly determined, in particular the function of the positively charged carboxy-terminus in recoverin 191QKVKEKLKEKKL202 in this context is poorly understood.

RESULTS

Binding of myristoylated recoverin to lipid bilayer depends on the charge distribution in phospholipids. Binding was tested by equilibrium centrifugation and surface plasmon resonance (SPR) assays. It is enhanced to a certain degree by the inclusion of phosphatidylserine (up to 60%) in the lipid mixture. However, a recoverin mutant that lacked the charged carboxy-terminus displayed the same relative binding amplitudes as wildtype (WT) recoverin when bound to neutral or acidic lipids. Instead, the charged carboxy-terminus of recoverin has a significant impact on the biphasic dissociation of recoverin from membranes. On the other hand, the nonmyristoylated WT and truncated mutant form of recoverin did not bind to lipid bilayers to a substantial amount as binding amplitudes observed in SPR measurements are similar to bulk refractive index changes.

CONCLUSION

Our data indicate a small, but evident electrostatic contribution to the overall binding energy of recoverin association with lipid bilayer. Properties of the charged carboxy-terminus are consistent with a role of this region as an internal effector region that prolongs the time recoverin stays on the membrane by influencing its Ca2+-sensitivity.

Determination of the contribution of the myristoyl group and hydrophobic amino acids of recoverin on its dynamics of binding to lipid monolayers

It has been postulated that myristoylation of peripheral proteins would facilitate their binding to membranes. However, the exact involvement of this lipid modification in membrane binding is still a matter of debate. Proteins containing a Ca(2+)-myristoyl switch where the extrusion of their myristoyl group is dependent on calcium binding is best illustrated by the Ca(2+)-binding recoverin, which is present in retinal rod cells. The parameters responsible for the modulation of the membrane binding of recoverin are still largely unknown. This study was thus performed to determine the involvement of different parameters on recoverin membrane binding. We have used surface pressure measurements and PM-IRRAS spectroscopy to monitor the adsorption of myristoylated and nonmyristoylated recoverin onto phospholipid monolayers in the presence and absence of calcium. The adsorption curves have shown that the myristoyl group and hydrophobic residues of myristoylated recoverin strongly accelerate membrane binding in the presence of calcium. In the case of nonmyristoylated recoverin in the presence of calcium, hydrophobic residues alone are responsible for its much faster monolayer binding than myristoylated and nonmyristoylated recoverin in the absence of calcium. The infrared spectra revealed that myristoylated and nonmyristoylated recoverin behave very different upon adsorption onto phospholipid monolayers. Indeed, PM-IRRAS spectra indicated that the myristoyl group allows a proper orientation and organization as well as faster and stronger binding of myristoylated recoverin to lipid monolayers compared to nonmyristoylated recoverin. Simulations of the spectra have allowed us to postulate that nonmyristoylated recoverin changes conformation and becomes hydrated at large extents of adsorption as well as to estimate the orientation of myristoylated recoverin with respect to the monolayer plane. In addition, adsorption measurements and electrophoresis of trypsin-treated myristoylated recoverin in the presence of zinc or calcium demonstrated that recoverin has a different conformation but a similar extent of monolayer binding in the presence of such ions.

Organization, structure and activity of proteins in monolayers

Many different processes take place at the cell membrane interface. Indeed, for instance, ligands bind membrane proteins which in turn activate peripheral membrane proteins, some of which are enzymes whose action is also located at the membrane interface. Native cell membranes are difficult to use to gain information on the activity of individual proteins at the membrane interface because of the large number of different proteins involved in membranous processes. Model membrane systems, such as monolayers at the air-water interface, have thus been extensively used during the last 50 years to reconstitute proteins and to gain information on their organization, structure and activity in membranes. In the present paper, we review the recent work we have performed with membrane and peripheral proteins as well as enzymes in monolayers at the air-water interface. We show that the structure and orientation of gramicidin has been determined by combining different methods. Furthermore, we demonstrate that the secondary structure of rhodopsin and bacteriorhodopsin is indistinguishable from that in native membranes when appropriate conditions are used. We also show that the kinetics and extent of monolayer binding of myristoylated recoverin is much faster than that of the nonmyristoylated form and that this binding is highly favored by the presence polyunsaturated phospholipids. Moreover, we show that the use of fragments of RPE65 allow determine which region of this protein is most likely involved in membrane binding. Monomolecular films were also used to further understand the hydrolysis of organized phospholipids by phospholipases A2 and C.

Atomic force microscopy: Determination of unbinding force, off rate and energy barrier for protein–ligand interaction

Recently, atomic force microscopy (AFM) based force measurements have been applied biophysically and clinically to the field of molecular recognition as well as to the evaluation of dynamic parameters for various interactions between proteins and ligands in their native environment. The aim of this review is to describe the use of the AFM to measure the forces that control biological interaction, focusing especially on protein-ligand and protein-protein interaction modes. We first considered the measurements of specific and non-specific unbinding forces which together control protein-ligand interactions. As such, we will look at the theoretical background of AFM force measurement curves for evaluating the unbinding forces of protein-ligand complexes. Three AFM model dynamic parameters developed recently for use in protein-ligand interactions are reviewed: (i) unbinding forces, (ii) off rates, and (iii) binding energies. By reviewing the several techniques developed for measuring forces between biological structures and intermolecular forces in the literature, we show that use of an AFM for these applications provides an excellent tool in terms of spatial resolution and lateral resolution, especially for protein-protein and protein-ligand interactions.

Probing the interaction forces between hydrophobic peptides and supported lipid bilayers using AFM

Despite the vast body of literature that has accumulated on tilted peptides in the past decade, direct information on the forces that drive their interaction with lipid membranes is lacking. Here, we attempted to use atomic force microscopy (AFM) to explore the interaction forces between the Simian immunodeficiency virus peptide and phase-separated supported bilayers composed of various lipids, i.e. dipalmitoylphosphatidylcholine, dioleoylphosphatidylcholine, dioleoylphosphatidic acid and dipalmitoylphosphatidylethanolamine. Histidine-tagged peptides were attached onto AFM tips terminated with nitrilotriacetate and tri(ethylene glycol) groups, an approach expected to ensure optimal exposure of the C-terminal hydrophobic domain. Force-distance curves recorded between peptide-tips and the different bilayer domains always showed a long-range repulsion upon approach and a lack of adhesion upon retraction, in marked contrast with the hydrophobic nature of the peptide. To explain this unexpected behaviour, we suggest a mechanism in which lipids are pulled out from the bilayer due to strong interactions with the peptide-tip, in agreement with the very low force needed to extract lipids from supported bilayers.

Dynamic response of glucagon/anti-glucagon pairs to pulling velocity and pH studied by atomic force microscopy

We used atomic force microscopy (AFM) to measure the unbinding force between antigen coupled to an AFM tip and antibody coated on the substrate surface. Dynamic responses of glucagon/anti-glucagon pairs with multiple pull-off steps to pH and pulling velocity were studied by AFM. Force-distance curves of a specific glucagon-anti-glucagon interaction system with mono-, di-, and multi-unbinding events were recorded, which may be attributed to a single, sequential or multiple breaking of interacting bond(s) between glucagon and anti-glucagon. We studied the dynamic response of glucagon-anti-glucagon pairs to various pulling velocities (16.7-166.7 nm/s). It was found that the mean value of the unbinding force was shifted toward higher values with increasing pulling velocity at each pH. This indicates that the friction force between glucagon and anti-glucagon may contribute to the unbinding force. Moreover, the dynamic response of glucagon-anti-glucagon pairs to pH (4-10) with different pulling velocities was studied. Within the acid range, the bond strength between the glucagon/anti-glucagon complex showed a rapid increase from pH 4 to 7 and reached a maximum (256.4+/-48.9 pN at 166.7 nm/s) at neutrality, followed by a sharp decrease with increasing pH (pH 7-10). This could be attributed to the conformational change that occurred in glucagon when the pH value in solution was varied from the reference level at neutrality. This study demonstrated that the pH dependence of multiple antigen-antibody bond-rupture forces could be measured by a force-based AFM biosensor. Unraveling the relationship between inter-molecular force and intra-molecular conformational change in acid, neutral, and alkaline environments may provide new directions for future application of force measurements by AFM in proteomics or in the development of a clinical cantilever-based mechanical biosensor.

Single-step purification of myristoylated and nonmyristoylated recoverin and substrate dependence of myristoylation level

Recoverin is cotranslationally modified by the covalent linkage of a myristoyl group to its N terminus. It is a member of a family of Ca(2+)-myristoyl switch proteins. Recombinant myristoylated revoverin is currently produced by the cotransformation of bacteria with recoverin and an enzyme that allows N-myristoylation and by supplementing the culture medium with myristic acid. A large variation in the myristoylation level of recoverin and in the amount of myristic acid supplied to the culture medium can be found in the literature. Moreover, although it is known to strongly affect bacterial growth, the amount of ethanol used to solubilize myristic acid is only scarcely mentioned. To improve our understanding of the parameters responsible for recombinant recoverin myristoylation, the effects of myristic acid and ethanol on recoverin myristoylation and expression levels have been systematically studied. In addition, a single-step purification procedure to produce purified myristoylated and nonmyristoylated recombinant recoverin has also been devised. Finally, sodium myristate has been used as an efficient alternative substrate to achieve high myristoylation and expression levels of recoverin. Given that a large number of proteins are myristoylated, these procedures could be applied to several other proteins in addition to recoverin.

Titration Force Microscopy on Supported Lipid Bilayers

The use of chemically modified atomic force microscopy (AFM) probes allows us to measure the surface charges of supported planar lipid bilayers with high sensitivity through the force spectroscopy operation mode. By controlling the chemistry of the tip, we can perform a classical analytical chemistry titration where the titration agent is a weak acid (attached to the AFM tip) with the particularity of being performed in surface rather than in solution and, especially, at the nanometric scale. Thus, the AFM tip acts as a real "nanosensor". The approaching curves of the force plots reveal that electrostatic interactions between the tip and the supported membrane play a key role. Besides, the plot of the adhesion force (measured from the retracting curve of the force plots) versus pH displays a nonsigmoidal shape with a peak in the adhesion force attributed to high-energy hydrogen bonds. One of these peaks corresponds to the pKa of the surface under study and the other to the pKa of the titrating probe attached to the tip.

Study of frictional properties of a phospholipid bilayer in a liquid environment with lateral force microscopy as a function of NaCl concentration

Friction properties of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC)-supported planar bilayers deposited on mica were tested in a liquid environment by lateral force microscopy. The presence of these bilayers was detected by imaging and force measurements with atomic force microscopy. To test how the presence of NaCl affects the frictional properties of the phospholipid bilayers, four DMPC bilayers were prepared on mica in saline media ranging from 0 to 0.1 M NaCl. Changes in the lateral vs vertical force curves were recorded as a function of NaCl concentration and related to structural changes induced in the DMPC bilayer by electrolyte ions. Three friction regimes were observed as the vertical force exerted by the tip on the bilayer increased. To relate the friction response to the structure of the DMPC bilayer, topographic images were recorded at the same time as friction data. Ions in solution screened charges present in DMPC polar heads, leading to more compact bilayers. As a consequence, the vertical force at which the bilayer broke during friction experiments increased with NaCl concentration. In addition, the topographic images showed that low-NaCl-concentration bilayers recover more easily due to the low cohesion between phospholipid molecules.

Effect of ion-binding and chemical phospholipid structure on the nanomechanics of lipid bilayers studied by force spectroscopy

The nanomechanical response of supported lipid bilayers has been studied by force spectroscopy with atomic force microscopy. We have experimentally proved that the amount of ions present in the measuring system has a strong effect on the force needed to puncture a 1,2-dimyristoyl-sn-glycero-3-phosphocholine bilayer with an atomic force microscope tip, thus highlighting the role that monovalent cations (so far underestimated, e.g., Na(+)) play upon membrane stability. The increase in the yield threshold force has been related to the increase in lateral interactions (higher phospholipid-phospholipid interaction, decrease in area per lipid) promoted by ions bound into the membrane. The same tendency has also been observed for other phosphatidylcholine bilayers, namely, 2-dilauroyl-sn-glycero-3-phosphocholine, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine, and 1,2-dioleoyl-sn-3-phosphocholine, and also for phosphatidylethanolamine bilayers such as 1-palmitoyl-2-oleoyl-sn-3-phosphoethanolamine. Finally, this effect has been also tested on a natural lipid bilayer (Escherichia coli lipid extract), showing the same overall tendency. The kinetics of the process has also been studied, together with the role of water upon membrane stability and its effect on membrane nanomechanics. Finally, the effect of the chemical structure of the phospholipid molecule on the nanomechanical response of the membrane has also been discussed.

Measurement of the anchorage force between GPI-anchored alkaline phosphatase and supported membranes by AFM force spectroscopy

Mammalian alkaline phosphatases (AP) are glycosylphosphatidylinositol (GPI) anchored proteins that are localized on the outer layer of the plasma membrane. The GPI anchors are covalently attached to the C-termini of proteins and consist of a glycan chain bonded to phosphatidylinositol with two acyl chains anchored into the membrane bilayer. Force spectroscopy, based on atomic force microscope (AFM) technology, was used to determine the adhesion of alkaline phosphatase in the absence and presence of anchors. The GPI anchors increase markedly the adhesion frequency (i.e., the protein affinity for the membrane). An adhesion force of 350 +/- 200 pN is measured between GPI-anchored AP (AP(GPI)) and supported phospholipid bilayers of dipalmitoylphosphatidylcholine (DPPC) presenting structural defects (holes). In the absence of defects, the adhesion force (103 +/- 17 pN) and the adhesion frequency are reduced. These results indicate that AP(GPI) poorly spontaneously insert into membranes in vivo and open new perspectives for the characterization of the interactions between GPI proteins and membranes.