Electrochemical and photon polarization modulation infrared reflection absorption spectroscopy study of the electric field driven transformations of a phospholipid bilayer supported at a gold electrode surface

Formulation of arginine-loaded mesoporous silica nanoparticles (Arg@MSNs) modified orthodontic adhesive

OBJECTIVES

The objective of this study was to synthesize arginine loaded mesoporous silica nanoparticles (Arg@MSNs), develop a novel orthodontic adhesive using Arg@MSNs as modifiers, and investigate the adhesive performance, antibacterial activity, and biocompatibility.

METHODS

Arg@MSNs were synthesized by immobilizing arginine into MSNs and characterized using transmission electron microscope (TEM), dynamic light scattering (DLS), and Fourier Transform Infrared Spectrometer (FT-IR). Arg@MSNs were incorporated into Transbond XT adhesive with different mass fraction to form functional adhesives. The degree of conversion (DC), arginine release behavior, adhesive performance, antibacterial activity against Streptococcus mutans biofilm, and cytotoxicity were comprehensively evaluated.

RESULTS

TEM, DLS, and FT-IR characterizations confirmed the successful preparation of Arg@MSNs. The incorporation of Arg@MSNs did not significantly affect DC and exhibited clinically acceptable bonding strength. Compared to the commercial control, the Arg@MSNs modified adhesives greatly suppressed the metabolic activity and polysaccharide production while increased the biofilm pH values. The cell counting kit (CCK)-8 test indicated no cytotoxicity.

CONCLUSIONS

The novel orthodontic adhesive containing Arg@MSNs exhibited significantly enhanced antibacterial activities and inhibitory effects on acid production compared to the commercial adhesive without compromising their bonding strength or biocompatibility.

CLINICAL SIGNIFICANCE

The novel orthodontic adhesive containing Arg@MSNs exhibits potential clinical benefits in preventing demineralization of enamel surfaces around or beneath orthodontic brackets due to its enhanced antibacterial activities and acid-producing inhibitory effects.

Enhancing Phototoxicity in Human Colorectal Tumor Cells Through Nanoarchitectonics for Synergistic Photothermal and Photodynamic Therapies

Phototherapies are promising for noninvasive treatment of aggressive tumors, especially when combining heat induction and oxidative processes. Herein, we show enhanced phototoxicity of gold shell-isolated nanorods conjugated with toluidine blue-O (AuSHINRs@TBO) against human colorectal tumor cells (Caco-2) with synergic effects of photothermal (PTT) and photodynamic therapies (PDT). Mitochondrial metabolic activity tests (MTT) performed on Caco-2 cell cultures indicated a photothermal effect from AuSHINRs owing to enhanced light absorption from the localized surface plasmon resonance (LSPR). The phototoxicity against Caco-2 cells was further increased with AuSHINRs@TBO where oxidative processes, such as hydroperoxidation, were also present, leading to a cell viability reduction from 85.5 to 39.0%. The molecular-level mechanisms responsible for these effects were investigated on bioinspired tumor membranes using Langmuir monolayers of Caco-2 lipid extract. Polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS) revealed that the AuSHINRs@TBO incorporation is due to attractive electrostatic interactions with negatively charged groups of the Caco-2 lipid extract, resulting in the expansion of surface pressure isotherms. Upon irradiation, Caco-2 lipid extract monolayers containing AuSHINRs@TBO (1:1 v/v) exhibited ca. 1.0% increase in surface area. This is attributed to the generation of reactive oxygen species (ROS) and their interaction with Caco-2 lipid extract monolayers, leading to hydroperoxide formation. The oxidative effects are facilitated by AuSHINRs@TBO penetration into the polar groups of the extract, allowing oxidative reactions with carbon chain unsaturations. These mechanisms are consistent with findings from confocal fluorescence microscopy, where the Caco-2 plasma membrane was the primary site of the cell death induction process.

Probing the Ion Transport Properties of Ultrashort Carbon Nanotubes Integrated with Supported Lipid Bilayers via Electrochemical Analysis

Supported lipid bilayers (SLBs) are commonly used to investigate interactions between cell membranes and their environment. These model platforms can be formed on electrode surfaces and analyzed using electrochemical methods for bioapplications. Carbon nanotube porins (CNTPs) integrated with SLBs have emerged as promising artificial ion channel platforms. In this study, we present the integration and ion transport characterization of CNTPs in in vivo environments. We combine experimental and simulation data obtained from electrochemical analysis to analyze the membrane resistance of the equivalent circuits. Our results show that carrying CNTPs on a gold electrode results in high conductance for monovalent cations (K⁺ and Na⁺) and low conductance for divalent cations (Ca²⁺).

Effect of Anionic Lipids on Mammalian Plasma Cell Membrane Properties

The effect of lipid composition on models of the inner leaflet of mammalian cell membranes has been investigated. Grazing incidence X-ray diffraction and X-ray and neutron reflectivity have been used to characterize lipid packing and solvation, while electrochemical and infrared spectroscopic methods have been employed to probe phase behavior in an applied electric field. Introducing a small quantity of the anionic lipid dimyristoylphosphatidylserine (DMPS) into bilayers of zwitterionic dimyristoylphosphatidylethanolamine (DMPE) results in a significant change in the bilayer response to an applied field: the tilt of the hydrocarbon chains increases before returning to the original tilt angle on detachment of the bilayer. Equimolar mixtures, with slightly closer chain packing, exhibit a similar but weaker response. The latter also tend to incorporate more solvent during this electrochemical phase transition, at levels similar to those of pure DMPS. Reflectivity measurements reveal greater solvation of lipid layers for DMPS > 30 mol %, matching the greater propensity for DMPS-rich bilayers to incorporate water. Taken together, the data indicate that the range of 10-35 mol % DMPS provides optimum bilayer properties (in flexibility and function as a barrier), which may explain why the DMPS content of cell membranes tends to be found within this range.

Molecular organization of dengue fusion peptide in phospholipid monolayers revealed by tensiometry and vibrational spectroscopy

The interaction of Dengue fusion peptide (FLAg) in selected lipid Langmuir monolayers was characterized with surface pressure-area isotherms and infrared spectroscopy to investigate the role of the membrane charge and molecular organization in the peptide-lipid binding. Surface pressure-area isotherms were employed to analyze the thermodynamic and mechanical properties of the FLAg-lipid monolayer, showing that charged lipid monolayers showed different peptide adsorption patterns for an optimized peptide concentration (maximum membrane adsorption). Polarization modulation infrared reflection-absorption spectroscopy pointed out that incorporating FLAg changed the dipole orientations for the lipid polar head groups, as confirmed in PG-containing monolayers. Also, FLAg reorients the lipid film when it interacts with the phosphate and choline groups. Finally, analysis of the 3₁₀-helix bands suggests that FLAg assumes a configuration as a hairpin, an essential premise for the beginning of the membrane fusion process.

Membrane Potentials Trigger Molecular-Scale Rearrangements in the Outer Membrane of Gram-Negative Bacteria

The structural complexity of the cell envelope of Gram-negative bacteria limits the fabrication of realistic models of bacterial cell membranes. A vertical Langmuir-Blodgett withdrawing was used to deposit a 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) monolayer on the Au(111) surface. The second leaflet composed of di[3-deoxy-D-manno-octulosonyl]-lipid A (KLA) was deposited using Langmuir-Schaefer transfer. The use of an electrode material as a support for the POPE-KLA bilayer allowed electrochemical control of the membrane's stability, compactness, and structure. Capacitance-potential curves showed a typical pattern for the supported lipid bilayers electrochemical characteristic. The minimum membrane capacitance was ∼4 μF cm^-2 and did not change in the following desorption-adsorption cycles, indicating the presence of a stable bilayer structure with an asymmetric composition of both leaflets. However, at a molecular scale, as elucidated in spectroelectrochemical experiments, large differences in the response of both leaflets to electric potentials were observed. The acyl chains in POPE and KLA existed in a liquid state. The quantitative analysis of the CH stretching modes indicated potential-driven reorientations in the hydrophobic fragment of the bilayer, already in the adsorbed state. To assign observed rearrangements to POPE and KLA lipids in both leaflets, per-deuterated d₃₁-POPE was transferred into the inner leaflet. Since no potential-dependent changes of the CD₂ stretching modes in the d₃₁-POPE-KLA bilayer were observed, reorientations in the acyl chain region were assigned to the KLA molecules. Mg²⁺ ions were bound to the polar head groups of KLA. The strength of electrostatic interactions in the polar head group region of KLA was dependent on the direction of the electric field. At negative electric potentials, the binding of divalent cations weakened, which gave the KLA molecules increased orientational flexibility. This behavior in electric fields is peculiar for the outer membrane and indicates that the microbial cell membranes have different electrochemical properties than phospholipid bilayers.

Generation of singlet oxygen via iron-dependent lipid peroxidation and its role in Ferroptosis

Ferroptosis is a cell death pathway mediated by iron-dependent accumulation of lipid peroxide. However, the specific downstream molecular events of iron-dependent lipid peroxidation are yet to be elucidated. In this study, based on various spectral analyses, we have found evidence that singlet oxygen is produced through the Russell mechanism during the self-reaction of lipid peroxyl radicals generated via iron-dependent lipid peroxidation regardless of the presence of cholesterol. Significantly reduced generation of singlet oxygen was observed in the absence of iron. The generated singlet oxygen accelerated the oxidative damage of lipid membranes by propagating lipid peroxidation and facilitated ferroptotic cancer cell death initiated by erastin. In this work, singlet oxygen has been revealed to be a new reactive species that participates in ferroptosis, thus improving the understanding on iron-dependent lipid peroxidation and the mechanism of ferroptosis.

Molecular Nature of Structured Water in the Light-Induced Interfacial Capacitance Changes at the Bioelectric Interface

Uncovering the function of structured water in the interfacial capacitance at the molecular level is the basis for the development of the concept and model of the electric double layer; however, the limitation of the available technology makes this task difficult. Herein, using surface-enhanced infrared absorption spectroscopy combined with electrochemistry, we revealed the contribution of the cleavage of loosely bonded tetrahedral water to the enhancement of model membrane capacitance. Upon further combination with ionic perturbation, we found that the interface hydrogen bonding environment in the stern layer was greatly significant for the light-induced cleavage of tetrahedral water and thus the conversion of optical signals into electrical signals. Our work has taken an important step toward gaining experimental insight into the relationship between water structure and capacitance at the bioelectric interface.

Effect of Molecular Structure on Electrochemical Phase Behavior of Phospholipid Bilayers on Au(111)

Lipid bilayers form the basis of biological cell membranes, selective and responsive barriers vital to the function of the cell. The structure and function of the bilayer are controlled by interactions between the constituent molecules and so vary with the composition of the membrane. These interactions also influence how a membrane behaves in the presence of electric fields they frequently experience in nature. In this study, we characterize the electrochemical phase behavior of dipalmitoylphosphatidylcholine (DPPC), a glycerophospholipid prevalent in nature and often used in model systems and healthcare applications. DPPC bilayers were formed on Au(111) electrodes using Langmuir-Blodgett and Langmuir-Schaefer deposition and studied with electrochemical methods, atomic force microscopy (AFM) and in situ polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS). The coverage of the substrate determined with AFM is in accord with that estimated from differential capacitance measurements, and the bilayer thickness is slightly higher than for bilayers of the similar but shorter-chained lipid, dimyristoylphosphatidylcholine (DMPC). DPPC bilayers exhibit similar electrochemical response to DMPC bilayers, but the organization of molecules differs, particularly at negative charge densities. Infrared spectra show that DPPC chains tilt as the charge density on the metal is increased in the negative direction, but, unlike in DMPC, the chains then return to their original tilt angle at the most negative potentials. The onset of the increase in the chain tilt angle coincides with a decrease in solvation around the ester carbonyl groups, and the conformation around the acyl chain linkage differs from that in DMPC. We interpret the differences in behavior between bilayers formed from these structurally similar lipids in terms of stronger dispersion forces between DPPC chains and conclude that relatively subtle changes in molecular structure may have a significant impact on a membrane's response to its environment.

Structural changes in the model of the outer cell membrane of Gram-negative bacteria interacting with melittin: an in situ spectroelectrochemical study

The cell membrane of Gram-negative bacteria interacting with an antimicrobial peptide presents a complex supramolecular assembly. Fabrication of models of bacterial cell membranes remains a large experimental challenge. Langmuir-Blodgett and Langmuir-Schaefer (LS-LB) transfer makes possible the deposition of multicomponent asymmetric lipid bilayers onto a gold surface. Two lipids: 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) and di[3-deoxy-D-manno-octulosonyl]-lipid A (KLA) were used to deposit a model of the outer membrane of Gram-negative bacteria on the Au(111) substrate. The use of gold as the solid substrate enables control of the membrane potential. Molecular scale changes in the model membrane exposed to physiological electric fields and interacting with melittin antimicrobial peptide are discussed in this paper. The interaction of the outer membrane with melittin leads to an increase in the membrane capacitance and permeability to ions and water. The stability of the outer membrane with bound melittin decreases at positive membrane potentials. In situ polarization modulation infrared reflection absorption spectroscopy is used to investigate membrane potential-dependent changes in the structure of the outer membrane interacting with melittin. The hydration of the ester carbonyl groups is not affected by the interaction with melittin. However, the orientation and hydrogen bond network with the carboxylate groups in KLA changes drastically after POPE-KLA bilayer interacts with melittin. We propose that the positively charged groups in the amino acids present at the C-terminus of the peptide interact directly with the polar head group of KLA. Simultaneously, the packing order in hydrocarbon chains in the membrane with bound melittin increases. A hydrophobic match between the chains in the lipids and the peptide, which spans the membrane, seems to be responsible for the ordering of the hydrocarbon chains region of the bilayer. The N-terminus enters into the hydrophobic region of the membrane and forms a channel to the hydrophilic head groups in POPE.

Plasma membrane permeabilization to explain erythrosine B phototoxicity on in vitro breast cancer cell models

Lipid oxidation is ubiquitous in cell life under oxygen and essential for photodynamic therapy (PDT) of carcinomas. However, the mechanisms underlying lipid oxidation in rather complex systems such as plasma membranes remain elusive. Herein, Langmuir monolayers were assembled with the lipid extract of glandular breast cancer (MCF7) cells and used to probe the molecular interactions allowing adsorption of the photosensitizer (PS) erythrosine B and subsequent photooxidation outcomes. Surface pressure (π) versus area (cm²/mL) isotherms of MCF7 lipid extract shifted to larger areas upon erythrosine incorporation, driven by secondary interactions that affected the orientation of the carbonyl groups and lipid chain organization. Light-irradiation increased the surface area of the MCF7 lipid extract monolayer containing erythrosine owing to the lipid hydroperoxidation, which may further undergo decomposition, resulting in the chain cleavage of phospholipids and membrane permeabilization. Incorporation of erythrosine by MCF7 cells induced slight toxic effects on in vitro assays, differently of the severe phototoxicity caused by light-irradiation, which significantly decreased cell viability by more than 75% at 2.5 × 10^-6 mol/L of erythrosine incubated for 3 and 24 h, reaching nearly 90% at 48 h of incubation. The origin of the phototoxic effects is in the rupture of the plasma membrane shown by the frontal (FSC) and side (SSC) light scattering of flow cytometry. Consistent with hydroperoxide decomposition, membrane permeabilization was also confirmed by cleaved lipids detected in mass spectrometry and subsidizes the necrotic pathway of cell death.

Boosting Antimicrobial Activity of Ciprofloxacin by Functionalization of Mesoporous Silica Nanoparticles

Mesoporous silica nanoparticles (MSNs) are very promising nanomaterials for treating bacterial infections when combined with pharmaceutical drugs. Herein, we report the preparation of two nanomaterials based on the immobilization of ciprofloxacin in mesoporous silica nanoparticles, either as the counter-ion of the choline derivative cation (MSN-[Ch][Cip]) or via anchoring on the surface of amino-group modified MSNs via an amide bond (MSN-Cip). Both nanomaterials were characterized by TEM, FTIR and solution ¹H NMR spectroscopies, elemental analysis, XRD and N₂ adsorption at 77 K in order to provide the desired structures. No cytotoxicity from the prepared mesoporous nanoparticles on 3T3 murine fibroblasts was observed. The antimicrobial activity of the nanomaterials was determined against Gram-positive (Staphylococcus aureus and Bacillus subtilis) and Gram-negative (Klebsiella pneumoniae) bacteria and the results were promising against S. aureus. In the case of B. subtilis, both nanomaterials exhibited higher antimicrobial activity than the precursor [Ch][Cip], and in the case of K. pneumoniae they exhibited higher activity than neutral ciprofloxacin.

Electrochemical Biosensors Based on Membrane-Bound Enzymes in Biomimetic Configurations

In nature, many enzymes are attached or inserted into the cell membrane, having hydrophobic subunits or lipid chains for this purpose. Their reconstitution on electrodes maintaining their natural structural characteristics allows for optimizing their electrocatalytic properties and stability. Different biomimetic strategies have been developed for modifying electrodes surfaces to accommodate membrane-bound enzymes, including the formation of self-assembled monolayers of hydrophobic compounds, lipid bilayers, or liposomes deposition. An overview of the different strategies used for the formation of biomimetic membranes, the reconstitution of membrane enzymes on electrodes, and their applications as biosensors is presented.

Molecular-level effects on cell membrane models to explain the phototoxicity of gold shell-isolated nanoparticles to cancer cells

Metallic nanoparticles are promising agents for photothermal cancer therapy (PTT) owing to their photostability and efficient light-to-heat conversion, but their possible aggregation remains an issue. In this paper, we report on the photoinduced heating of gold shell-isolated nanoparticles (AuSHINs) in in vitro experiments to kill human oropharyngeal (HEp-2) and breast (BT-474 and MCF-7) carcinoma cells, with cell viability reducing below 50 % with 2.2 × 10¹² AuSHINs/mL and 6 h of incubation. This toxicity to cancer cells is significantly higher than in previous works with gold nanoparticles. Considering the AuSHINs dimensions we hypothesize that cell uptake is not straightforward, and the mechanism of action involves accumulation on phospholipid membranes as the PTT target for photoinduced heating and subsequent generation of reactive oxygen species (ROS). Using Langmuir monolayers as simplified membrane models, we confirmed that AuSHINs have a larger effect on 1,2-dioleoyl-sn-glycero-3-phospho-l-serine (DOPS), believed to represent cancer cell membranes, than on 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) taken as representative of healthy eukaryotic cells. In particular, data from polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) revealed an increased conformational order of DOPS tails due to the stronger adsorption of AuSHINs. Furthermore, light irradiation reduced the stability of AuSHINs containing DOPC and DOPS monolayers owing to oxidative reactions triggered by ROS upon photoinduced heating. Compared to DOPC, DOPS lost nearly twice as much material to the subphase, which is consistent with a higher rate of ROS formation in the vicinity of the DOPS monolayer.

Role of Toluidine Blue-O Binding Mechanism for Photooxidation in Bioinspired Bacterial Membranes

The alarming increase in bacterial resistance to antibiotics has demanded new strategies for microbial inactivation, which include photodynamic therapy whose activity relies on the photoreaction damage to the microorganism membrane. Herein, the binding mechanisms of the photosensitizer toluidine blue-O (TBO) on simplified models of bacterial membrane with Langmuir monolayers of 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) and 1,2-dioleoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DOPG) were correlated to the effects of the photoinduced lipid oxidation. Langmuir monolayers of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) were also used as a reference of mammalian membranes. The surface pressure isotherms combined with polarization-modulated infrared reflection absorption spectroscopy revealed that TBO expands DOPC, DOPE, and DOPG monolayers owing to electrostatic interactions with the negatively charged groups in the phospholipids, with a stronger adsorption on DOPG, which has a net surface charge. Light irradiation made the TBO-containing DOPC and DOPE monolayers less unstable as a result of the singlet oxygen (¹O₂) reaction with the chain unsaturation and hydroperoxide formation. In contrast, the decreased stability of the irradiated TBO-containing DOPG monolayer suggests the cleavage of carbon chains. The anionic nature of DOPG allowed a deeper penetration of TBO into the chain region, favoring contact-dependent reactions between the excited triplet state of TBO and lipid unsaturations or/and hydroperoxide groups, which is the key for the cleavage reactions and further membrane permeabilization.

The shape of lipid molecules affects potential-driven molecular-scale rearrangements in model cell membranes on electrodes

Planar asymmetric lipid bilayers composed of phosphatidylethanolamine and phosphatidylglycerol lipids are transferred onto a gold electrode surface. Lipids containing two saturated, one monounsaturated and two monounsaturated hydrocarbon chains compose the model membranes. Results of electrochemically controlled polarization modulation infrared reflection absorption spectroscopy and quartz crystal microbalance with energy dissipation studies reveal two different types of electric potential-dependent structural rearrangements in the bilayers. They are correlated with the geometry of the lipid molecule. Packing parameter correlates the cross-section area of the hydrophobic and hydrophilic parts of amphiphilic molecules. In bilayers composed of lipids with the packing parameter <1, the hydrocarbon chains are tilted with respect to the bilayer plane and the polar head groups are well hydrated. At a threshold potential an abrupt flow of water through the bilayer is connected with membrane dehydration and upward orientation of the chains. In bilayers composed of lipids with packing parameter ≥1, electric potentials have negligible effect on the membrane structure. A simple rule correlating the packing parameter with molecular scale changes occurring at electrified membranes has a large diagnostic implication for biomimetic studies and our understanding of molecular processes occurring in biological cell membranes.

Binding of a Myristoylated Protein to the Lipid Membrane Influenced by Interactions with the Polar Head Group Region

Many cytoplasmic proteins contain a hydrophobic acyl chain, which facilitates protein binding to cell membranes. Hydrophobic interactions between the exposed acyl chain of the protein and hydrocarbon chains of lipids in the cell membrane are the driving force for this specific lipid-protein interaction. Recent studies point out that in addition to hydrophobic interactions the charge-charge and charge-dipole interactions between the polar head groups and basic amino acids contribute significantly to the binding process. Recoverin possesses a myristoyl chain at the N-terminus. In the presence of Ca²⁺ ions, the protein undergoes structural rearrangements, leading to the extrusion of the myristoyl chain, facilitating the protein binding to the membrane. In this work, we investigate the impact of interactions between the polar head group region of lipid molecules and recoverin which binds to the model membrane. The interaction with a planar lipid bilayer composed of phosphatidylcholine and cholesterol with myristoylated and nonmyristoylated recoverin is studied by in situ polarization modulation infrared reflection absorption spectroscopy. The binding of recoverin to the lipid bilayer depends on the transmembrane potential, indicating that the orientation of the permanent surface dipole in the supramolecular assembly of the lipid membrane influences the protein attachment to the membrane surface. Analysis of the amide I' mode indicates that the orientation of recoverin bound to the lipid bilayer is independent of the presence of myristoyl chain in the protein and of the folding of the protein into the tense or relaxed state. In contrast, it changes as a function of the membrane potential. At positive transmembrane potentials, the α-helical fragments of recoverin are oriented predominantly parallel to the bilayer surface. This orientation facilitates the insertion of the acyl chain of the protein into the hydrophobic region of the bilayer. At negative transmembrane potentials, the α-helical fragments of recoverin change their orientation with respect to the membrane surface, which is followed by the removal of the myristoyl chain from the membrane.

Impact of the protein myristoylation on the structure of a model cell membrane in a protein bound state

The neuronal calcium sensor protein recoverin is expressed in retinal rod and cone cells and is involved in the calcium-dependent control of receptor (rhodopsin) phosphorylation and receptor inactivation. In its Ca²⁺-saturated form recoverin is attached to membranes by an exposed myristoyl group and responds to oscillating changes of intracellular Ca²⁺-concentration by performing a so-called Ca²⁺-myristoyl switch. In this work we analyze changes in a liquid lipid bilayer interacting with myristoylated and non-myristoylated recoverin by employing polarization modulation infrared reflection absorption spectroscopy (PM IRRAS) with electrochemical control. The lipid bilayer is transferred onto a polycrystalline gold electrode using Langmuir-Blodgett Langmuir-Schaefer transfer at the surface pressure π = 30 mN m^-1 which ensures, necessary for the lipid-protein interaction, liquid state of the hydrocarbon chains of phospholipids. The model lipid bilayers are adsorbed directly on the Au electrode surface at transmembrane potentials -0.2 < ∆ϕM|S < 0.25 V. The interaction with recoverin leads to a stabilization of the adsorbed state of the lipid bilayer at positive transmembrane potentials. The interaction leads to a decrease in the surface charge density that accumulates on the membrane covered electrode surface, indicating changes in the lateral interactions in the lipid membrane. In situ spectroelectrochemical studies confirm orientation changes in the hydrophobic environment of the model membrane. Insertion of the myristoyl group of recoverin into the membrane is connected with an increase in the tilt of the hydrocarbon chains with respect to the surface normal and decrease in the bilayer thickness. Potential-induced pore formation and desorption of the lipid bilayer from the membrane surface is accompanied by the removal of the acyl chains of recoverin from the membrane.

The Role of Water Distribution Controlled by Transmembrane Potentials in the Cytochrome c-Cardiolipin Interaction: Revealing from Surface-Enhanced Infrared Absorption Spectroscopy

The interaction of cytochrome c (cyt c) with cardiolipin (CL) plays a crucial role in apoptotic functions, however, the changes of the transmembrane potential in governing the protein behavior at the membrane-water interface have not been studied due to the difficulties in simultaneously monitoring the interaction and regulating the electric field. Herein, surface-enhanced infrared absorption (SEIRA) spectroelectrochemistry is employed to study the mechanism of how the transmembrane potentials control the interaction of cyt c with CL membranes by regulating the electrode potentials of an Au film. When the transmembrane potential decreases, the water content at the interface of the membranes can be increased to slow down protein adsorption through decreasing the hydrogen-bond and hydrophobic interactions, but regulates the redox behavior of CL-bound cyt c through a possible water-facilitated proton-coupled electron transfer process. Our results suggest that the potential drop-induced restructure of the CL conformation and the hydration state could modify the structure and function of CL-bound cyt c on the lipid membrane.

Electrochemical extraction of gold from wastes as nanoparticles stabilized by phospholipids

A simple one-step method for the extraction of gold from wastes as nanoparticles stabilized by phospholipids is demonstrated. This is achieved by applying an AC voltage for 5s to the gold-containing wastes, which act as the electrodes in a buffer solution containing a dispersed phospholipid (1,2-dioleoyl-sn-glycero-3-phosphocholine, DOPC). This is an environmentally friendly and rapid method for recovering gold from wastes. The extracted gold nanoparticles have significant potential as a catalyst or biomedical material.

Effects of Alkali Cations and Halide Anions on the Self-Assembly of Phosphatidylcholine in Oils

The interactions between ions and phospholipids are closely associated with the structures and functions of cell membrane. Instead of conventional aqueous systems, we systematically investigated the effects of inorganic ions on the self-assembly of lecithin, a zwitterionic phosphatidylcholine, in cyclohexane. Previous studies have shown that addition of inorganic salts with specific divalent and trivalent cations can transform lecithin organosols into organogels. In this study, we focused on the effect of monovalent alkali halides. Fourier transform infrared spectroscopy was used to demonstrate that the binding strength of the alkali cations with the phosphate of lecithin is in the order Li⁺ > Na⁺ > K⁺. More importantly, the cation-phosphate interaction is affected by the paired halide anions, and the effect follows the series I^- > Br^- > Cl^-. The salts of stronger interactions with lecithin, including LiCl, LiBr, LiI, and NaI, were found to induce cylindrical micelles sufficiently long to form organogels, while others remain organosols. A mechanism based on the charge density of ions and the enthalpy change of the ion exchange between alkali halides and lecithin headgroup is provided to explain the contrasting interactions and the effectiveness of the salts to induce organogelation.

Physicochemical Studies on Orientation and Conformation of a New Bacteriocin BacSp222 in a Planar Phospholipid Bilayer

The behavior, secondary structure, and orientation of a recently discovered bacteriocin-like peptide BacSp222 in a lipid model system supported at a gold electrode was investigated by chronocoulometry, polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS), and attenuated total reflectance infrared (ATR-IR) spectroscopy. The IR spectra show that the secondary structure of BacSp222 is predominantly α-helical. Analysis of the spectra in the amide I region shows that the α-helical fragment of the peptide is inserted into bilayer at the potential range at which the bilayer is stable and attached to the Au(111) surface, i.e., from -0.5 to 0.3 V vs Ag/AgCl. Insertion of BacSp222 to the membrane significantly changes the conformation of the acyl chains of lipid molecules, from all-trans to partially melted; however, the chains become less tilted. Based on these results, we propose that BacSp222 interacts with the DMPC bilayer through the barrel-stave pore formation. In this model, α-helix of BacSp222 inserts into the membrane with an angle between the α-helix axis and membrane normal equal to ∼18°. The changes in orientation of the α-helical fragment of the peptide indicate that the orientation of BacSp222 with respect to the bilayer surface is potential-dependent. The peptide is inserted into the membrane driven by the electrostatic field generated by negative charge at the metal surface. It is not inserted at negative potentials where the membrane is detached from the metal and no longer exposed to the electrostatic field of the metal.

Molecular-Level Modifications Induced by Photo-Oxidation of Lipid Monolayers Interacting with Erythrosin

Incorporation into cell membranes is key for the action of photosensitizers in photomedicine treatments, with hydroperoxidation as the prominent pathway of lipid oxidation. In this paper, we use Langmuir monolayers of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) as cell membrane models to investigate adsorption of the photosensitizer erythrosin and its effect on photoinduced lipid oxidation. From surface pressure isotherms and polarization-modulated infrared reflection-absorption spectroscopy (PM-IRRAS) data, erythrosin was found to adsorb mainly via electrostatic interaction with the choline in the head groups of both DOPC and DPPC. It caused larger monolayer expansion in DOPC, with possible penetration into the hydrophobic unsaturated chains, while penetration into the DPPC saturated chains was insignificant. Easier penetration is due to the less packed DOPC monolayer, in comparison to the more compact DPPC according to the monolayer compressibility data. Most importantly, light irradiation at 530 nm made the erythrosin-containing DOPC monolayer become less unstable, with a relative surface area increase of ca. 19%, in agreement with previous findings for bioadhesive giant vesicles. The relative area increase is consistent with hydroperoxidation, supporting the erythrosin penetration into the lipid chains, which favors singlet oxygen generation close to double bonds, an important requirement for photodynamic efficiency.

Surface-Enhanced Infrared Spectroscopy and Neutron Reflectivity Studies of Ubiquinone in Hybrid Bilayer Membranes under Potential Control

Surface-enhanced infrared adsorption spectroscopy (SEIRAS) and neutron reflectometry (NR) were employed to characterize ubiquinone (UQ) containing hybrid bilayer membranes. The biomimetic membrane was prepared by fusing phospholipid vesicles on a hydrophobic octadecanethiol monolayer self-assembled on a thin gold film. Using SEIRAS, the assembly of the membrane is monitored in situ. The presence of ubiquinone is verified by the characteristic carbonyl peaks from the quinone ester. A well-ordered distal lipid leaflet results from fusion of vesicles with and without the addition of ubiquinone. With applied potential, the hybrid bilayer membrane in the absence of UQ behaves in the same way as previously reported solid supported phospholipid membranes. When ubiquinone is incorporated in the membrane, electric field induced changes in the distal leaflet are suppressed. Changes in the infrared vibrations of the ubiquinone due to applied potential indicate the head groups are located in both polar and nonpolar environments. The spectroscopic data reveal that the isoprenoid unit of the ubiquinone is likely lying in the midplane of the lipid bilayer while the head has some freedom to move within the hydrophobic core. The SEIRAS experiments show redox behavior of UQ incorporated in a model lipid membrane that are otherwise inaccessible with traditional electrochemistry techniques.

Effect of Deuteration on Phase Behavior of Supported Phospholipid Bilayers: A Spectroelectrochemical Study

Differences in molecular organization of two sides of a chemically symmetric, planar bilayer supported on a Au(111) substrate have been monitored with charge density measurements and in situ polarization modulation infrared reflection-absorption spectroscopy (PM-IRRAS). Isotopic substitution of the hydrogen atoms in the hydrocarbon chains with deuterium atoms in one monolayer was employed to allow the monitoring of C-H vibrations from that monolayer alone. Charge density measurements of bilayers formed from dimyristoylphosphatidylethanolamine (DMPE) showed that the effect of placing the deuterated layer next to the substrate or electrolyte had little impact on the electrical barrier properties. In situ PM-IRRAS studies revealed that the structure of the two monolayers was the same at negative potentials, where the bilayer is separated from the Au substrate, but different at more positive potentials or small charge densities, where the bilayer is expected to be directly adsorbed on the Au surface. Thus, the differences observed for the related molecule dimyristoylphosphatidylcholine (DMPC) persist in planar structures, although to a lesser extent. A small but observable variation in the tilt angle was also apparent in the spectra of both isotopically asymmetric DMPE bilayers during the electrochemical phase transition. The fact that this effect was not previously observed for hydrogenous bilayers means that the dynamic behavior of deuterated DMPE and/or of bilayers composed of different monolayers is different from that of hydrogenous DMPE bilayers. These results have implications for future studies in which isotopic substitution is used to extract selectively information from one layer or component of lipid bilayers in spectroscopic or neutron measurements.

Mechanism of Lipid Vesicles Spreading and Bilayer Formation on a Au(111) Surface

Spreading of small unilamellar vesicles on solid surfaces is one of the most common ways to obtain supported lipid bilayers. Although the method has been used successfully for many years, the details of this process are still the subject of intense debate. Particularly controversial is the mechanism of bilayer formation on metallic surfaces like gold. In this work, we have employed scanning probe microscopy techniques to evaluate the details of lipid vesicles spreading and formation of the lipid bilayer on a Au(111) surface in a phosphate-buffered saline solution. Nanoscale imaging revealed that the mechanism of this process differs significantly from that usually assumed for hydrophilic surfaces such as mica, glass, and silicon oxide. Formation of the bilayer on gold involves several steps. Initially, the vesicles accumulate on a gold surface and release lipid molecules that adsorb on a Au(111) surface, giving rise to the appearance of highly ordered stripelike domains. The latter serve as a template for the buildup of a hemimicellar film, which contributes to the increased hydrophilicity of the external surface and facilitates further adsorption and rupture of the vesicles. As a result, the bilayer is spread over a hemimicellar film, and then it is followed by slow fusion between coupled layers leading to formation of a single bilayer supported on a gold surface. We believe that the results presented in this work may provide some new insights into the area of research related to supported lipid bilayers.

Binding of methylene blue onto Langmuir monolayers representing cell membranes may explain its efficiency as photosensitizer in photodynamic therapy

We provide evidence for the electrostatic interactions between the cationic photosensitizer methylene blue (MB) and cell membrane models represented by neat and mixed Langmuir monolayers of dioleylphosphatidylcholine (DOPC) and 1,1',2,2'-tetraoleoylcardiolipin (CL). From surface pressure measurements, MB was found to adsorb strongly and expand CL-containing monolayers, while it caused an apparent decreasing in molecular area on neat DOPC monolayer. The binding site of MB could be inferred from data with the surface-specific polarization-modulated infrared reflection-absorption spectroscopy (PM-IRRAS) technique, where changes induced by MB were observed in the vibrational modes of the phosphate groups of both CL and DOPC. The incorporation of MB also affected the carbonyl groups and the packing of the alkyl chains, thus indicating that MB binding site favors singlet oxygen generation close to the double bonds in the alkyl chains, an important requirement for photodynamic efficiency. Significantly, the data presented here demonstrate that MB may act in membranes composed by PCs, such as mammalian plasma membranes, and in those containing CL, as in bacterial and inner mitochondrial membranes.

Tethered bilayer lipid membranes (tBLMs): interest and applications for biological membrane investigations

Biological membranes play a central role in the biology of the cell. They are not only the hydrophobic barrier allowing separation between two water soluble compartments but also a supra-molecular entity that has vital structural functions. Notably, they are involved in many exchange processes between the outside and inside cellular spaces. Accounting for the complexity of cell membranes, reliable models are needed to acquire current knowledge of the molecular processes occurring in membranes. To simplify the investigation of lipid/protein interactions, the use of biomimetic membranes is an approach that allows manipulation of the lipid composition of specific domains and/or the protein composition, and the evaluation of the reciprocal effects. Since the middle of the 80's, lipid bilayer membranes have been constantly developed as models of biological membranes with the ultimate goal to reincorporate membrane proteins for their functional investigation. In this review, after a brief description of the planar lipid bilayers as biomimetic membrane models, we will focus on the construction of the tethered Bilayer Lipid Membranes, the most promising model for efficient membrane protein reconstitution and investigation of molecular processes occurring in cell membranes.

Mercury-supported biomimetic membranes for the investigation of antimicrobial peptides

Tethered bilayer lipid membranes (tBLMs) consist of a lipid bilayer interposed between an aqueous solution and a hydrophilic "spacer" anchored to a gold or mercury electrode. There is great potential for application of these biomimetic membranes for the elucidation of structure-function relationships of membrane peptides and proteins. A drawback in the use of mercury-supported tBLMs with respect to gold-supported ones is represented by the difficulty in applying surface sensitive, spectroscopic and scanning probe microscopic techniques to gather information on the architecture of these biomimetic membranes. Nonetheless, mercury-supported tBLMs are definitely superior to gold-supported biomimetic membranes for the investigation of the function of membrane peptides and proteins, thanks to a fluidity and lipid lateral mobility comparable with those of bilayer lipid membranes interposed between two aqueous phases (BLMs), but with a much higher robustness and resistance to electric fields. The different features of mercury-supported tBLMs reconstituted with functionally active membrane proteins and peptides of bacteriological or pharmacological interest may be disclosed by a judicious choice of the most appropriate electrochemical techniques. We will describe the way in which electrochemical impedance spectroscopy, potential-step chronocoulometry, cyclic voltammetry and phase-sensitive AC voltammetry are conveniently employed to investigate the structure of mercury-supported tBLMs and the mode of interaction of antimicrobial peptides reconstituted into them.

Incorporation of ubiquinone in supported lipid bilayers on ITO

Ubiquinone (UQ) is one of the main electron and proton shuttle molecules in biological systems, and dipalmitoylphosphatidylcholine (DPPC) is one of the most used model lipids. Supported planar bilayers (SPBs) are extensively accepted as biological model membranes. In this study, SPBs have been deposited on ITO, which is a semiconductor with good electrical and optical features. Specifically, topographic atomic force microscopy (AFM) images and force curves have been performed on SPBs with several DPPC:UQ ratios to study the location and the interaction of UQ in the SPB. Additionally, cyclic voltammetry has been used to understand the electrochemical behavior of DPPC:UQ SPBs. Obtained results show that, in our case, UQ is placed in two main different positions in SPBs. First, between the DPPC hydrophobic chains, fact that originates a decrease in the breakthrough force of the bilayer, and the second between the two leaflets that form the SPBs. This second position occurs when increasing the UQ content, fact that eventually forms UQ aggregates at high concentrations. The formation of aggregates produces an expansion of the SPB average height and a bimodal distribution of the breakthrough force. The voltammetric response of UQ depends on its position on the bilayer.

Potential-dependent interaction of DOPC liposomes with an octadecanol-covered Au(111) surface investigated using electrochemical methods coupled with in situ fluorescence microscopy

The potential-controlled incorporation of DOPC liposomes (100 nm diameter) into an adsorbed octadecanol layer on Au(111) was studied using electrochemical and in situ fluorescence microscopy. The adsorbed layer of octadecanol included a small amount of a lipophilic fluorophore-octadecanol modified with BODIPY-to enable fluorescence imaging. The deposited octadecanol layer was found not to allow liposomes to interact unless the potential was less than -0.4 V/SCE, which introduces defects into the adsorbed layer. Small increases in the capacitance of the adsorbed layer were measured after introducing the defects, allowing the liposomes to interact with the defects and then annealing the defects at 0 V/SCE. A change in the adsorbed layer was also signified by a more positive desorption potential for the liposome-modified adsorbed layer as compared to that for an adsorbed layer that was porated in a similar fashion but without liposomes present in the electrolyte. These subtle changes in capacitance are difficult to interpret, so an in situ spectroscopic study was performed to provide a more direct measure of the interaction. The incorporation of liposomes should result in an increase in the fluorescence measured because the fluorophore should become further separated from the gold surface, reducing the efficiency of fluorescence quenching. No significant increase in the fluorescence of the adsorbed layer was observed during the potential pulses used in the poration procedure in the absence of liposomes. In the presence of liposomes, the fluorescence intensity was found to depend on the potential and time used for poration. At 0 V/SCE, no significant change in the fluorescence was observed for defect-free adsorbed layers. Changing the poration potential to -0.4 V/SCE caused significant increases in the fluorescence and the appearance of new structural features in the adsorbed layers that were more easily observed during the desorption procedure. The extent of fluorescence changes was found to be strongly dependent on the nature of the adsorbed layer under investigation, which suggests that the poration and liposome interaction are dependent on the quality of the adsorbed layer and its ease of poration through changes in the electrode potential.

Effect of headgroup on the physicochemical properties of phospholipid bilayers in electric fields: size matters

The effect of molecular structure on ensemble structure of phospholipid films has been investigated. Bilayers of dimyristoyl phosphatidylethanolamine (DMPE) were prepared on Au(111) electrodes using Langmuir-Blodgett and Langmuir-Schaeffer deposition. Capacitance and charge density measurements were used to investigate the adsorption behavior and barrier properties of the lipid bilayers. In situ polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) was employed to investigate the organization of the molecules within the bilayer. DMPE bilayers exhibit lower capacitance than bilayers formed from the related lipid, dimyristoyl phosphatidylcholine (DMPC). The infrared data show that these results can be explained by structural differences between the bilayers formed from each molecule. DMPE organizes into bilayers with hydrocarbon chains tilted at a smaller angle to the surface normal, which results in a thicker film. The hydrocarbon chains contain few conformational defects. Spectra in the carbonyl and phosphate stretching mode regions indicate low solvent content of DMPE films. Both of these effects combine to produce films with lower capacitance and enhanced barrier properties. The results are explained in terms of the differences in structure between the constituent molecules.

Atomic force microscopy studies of a floating-bilayer lipid membrane on a Au(111) surface modified with a hydrophilic monolayer

The surface of a gold electrode was functionalized with a hydrophilic monolayer of 1-thio-β-D-glucose formed by spontaneous self-assembly. The Langmuir-Blodgett/Langmuir-Schaefer (LB/LS) method was then used to assemble a bilayer onto the modified Au(111) surface. The bilayer lipid membrane (BLM) was separated from the Au(111) electrode surface by incorporating the monosialoganglioside GM1 into the inner leaflet of a bilayer composed of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and cholesterol. To make the inner leaflet, monolayers of GM1/DMPC/cholesterol with mole ratios of 1:6:3, 2:5:3, and 3:4:3 were used. The outer leaflet was composed of a 7:3 mole ratio of DMPC/cholesterol. Because of the amphiphilic properties of GM1, the hydrophobic acyl chains were incorporated into the BLM, whereas the large hydrophilic carbohydrate headgroups were physically adsorbed to the Au(111) electrode surface, creating a "floating" BLM (fBLM). This model contained a water-rich reservoir between the BLM and the gold surface. In addition, because of the bilayer being physically adsorbed onto the support, the fluidity of the BLM was maintained. The compression isotherms were measured at the air/water interface to determine the phase behavior and optimal transfer conditions. The images acquired using atomic force microscopy (AFM) and the force-distance measurements showed that the structure of the fBLM evolved with increasing GM1 content from 10 to 30 mol %, undergoing a transition from a corrugated to a homogeneous phase. This change was associated with a significant increase in bilayer thickness (from ∼5.3 to 7.3 nm). The highest-quality fBLM was produced with 30 mol % GM1.