Ca2+-mediated interaction between dextran sulfate and dimyristoyl-sn-glycero-3-phosphocholine surfaces studied by 2H nuclear magnetic resonance

Analytical challenges of glycosaminoglycans at biological interfaces

The analysis of glycosaminoglycans (GAGs) is a challenging task due to their high structural heterogeneity, which results in diverse GAG chains with similar chemical properties. Simultaneously, it is of high importance to understand their role and behavior in biological systems. It has been known for decades now that GAGs can interact with lipid molecules and thus contribute to the onset of atherosclerosis, but their interactions at and with biological interfaces, such as the cell membrane, are yet to be revealed. Here, analytical approaches that could yield important knowledge on the GAG-cell membrane interactions as well as the synthetic and analytical advances that make their study possible are discussed. Due to recent developments in laser technology, we particularly focus on nonlinear spectroscopic methods, especially vibrational sum-frequency generation spectroscopy, which has the potential to unravel the structural complexity of heterogeneous biological interfaces in contact with GAGs, in situ and in real time.

Calcium bridging drives polysaccharide co-adsorption to a proxy sea surface microlayer

Saccharides comprise a significant mass fraction of organic carbon in sea spray aerosol (SSA), but the mechanisms through which saccharides are transferred from seawater to the ocean surface and eventually into SSA are unclear. It is hypothesized that saccharides cooperatively adsorb to other insoluble organic matter at the air/sea interface, known as the sea surface microlayer (SSML). Using a combination of surface-sensitive infrared reflection-absorption spectroscopy and all-atom molecular dynamics simulations, we demonstrate that the marine-relevant, anionic polysaccharide alginate co-adsorbs to an insoluble palmitic acid monolayer via divalent cationic bridging interactions. Ca2+ induces the greatest extent of alginate co-adsorption to the monolayer, evidenced by the ∼30% increase in surface coverage, whereas Mg2+ only facilitates one-third the extent of co-adsorption at seawater-relevant cation concentrations due to its strong hydration propensity. Na+ cations alone do not facilitate alginate co-adsorption, and palmitic acid protonation hinders the formation of divalent cationic bridges between the palmitate and alginate carboxylate moieties. Alginate co-adsorption is largely confined to the interfacial region beneath the monolayer headgroups, so surface pressure, and thus monolayer surface coverage, only changes the amount of alginate co-adsorption by less than 5%. Our results provide physical and molecular characterization of a potentially significant polysaccharide enrichment mechanism within the SSML.

Analysis of zwitterionic membrane fouling mechanism caused by HPAM in the presence of electrolytes

Membrane fouling has always been a tough issue that is urgent to solve. Electrolytes which are prevalent in wastewater have a major influence on membrane fouling. Therefore, it is of great significance to understand the role and fouling mechanism of electrolytes in the membrane fouling process. In this work, the zwitterionic membrane is used to process hydrolyzed poly(acrylamide) (HPAM) with the addition of electrolytes (CaCl₂, NaCl). Meanwhile, the effect of different electrolytes on the zwitterionic membrane fouling process by hydrolyzed poly(acrylamide) (HPAM) is systematically investigated. It was found that the flux recovery ratio (FRR) of the zwitterionic membrane is nearly 100% after treating HPAM with the addition of electrolytes. Therefore, molecular dynamics (MD) simulations were applied to illustrate the impact of electrolytes on the change of foulant structures and confirm the consequent effect of electrolytes on membrane fouling. According to the experiment and MD simulation results, it is found that the positive ion layer which exists between the HPAM and zwitterionic surface results in the excellent fouling resistance performance of the zwitterionic membrane. The zwitterionic membrane fouling mechanism is analyzed, which is helpful to the understanding of zwitterionic membrane fouling in high salinity wastewater.

Integration of Cell-Free Expression and Solid-State NMR to Investigate the Dynamic Properties of Different Sites of the Growth Hormone Secretagogue Receptor

Cell-free expression represents an attractive method to produce large quantities of selectively labeled protein for NMR applications. Here, cell-free expression was used to label specific regions of the growth hormone secretagogue receptor (GHSR) with NMR-active isotopes. The GHSR is a member of the class A family of G protein-coupled receptors. A cell-free expression system was established to produce the GHSR in the precipitated form. The solubilized receptor was refolded in vitro and reconstituted into DMPC lipid membranes. Methionines, arginines, and histidines were chosen for ¹³C-labeling as they are representative for the transmembrane domains, the loops and flanking regions of the transmembrane α-helices, and the C-terminus of the receptor, respectively. The dynamics of the isotopically labeled residues was characterized by solid-state NMR measuring motionally averaged ¹H-¹³C dipolar couplings, which were converted into molecular order parameters. Separated local field DIPSHIFT experiments under magic-angle spinning conditions using either varying cross polarization contact times or direct excitation provided order parameters for these residues showing that the C-terminus was the segment with the highest motional amplitude. The loop regions and helix ends as well as the transmembrane regions of the GHSR represent relatively rigid segments in the overall very flexible receptor molecule. Although no site resolution could be achieved in the experiments, the previously reported highly dynamic character of the receptor concluded from uniformly ¹³C labeled receptor samples could be further specified by this segmental labeling approach, leading to a more diversified understanding of the receptor dynamics under equilibrium conditions.

Mechanical Stability of Lipid Membranes Decorated with Dextran Sulfate

Lipid vesicles decorated with polysaccharides have been proposed as vehicles for drug delivery because the polymers confer to the vesicles an enhanced stability, increasing the probability of the drug for reaching the target cell. Here, we first test the affinity of dextran sulfate (DS) for two different vesicle composition, and afterward, we study the effect of DS on the liposome mechanical properties. We found that DS binds to both tested membrane compositions. The interaction of DS with the anionic membranes studied here is mediated by the metal ions present in the aqueous solution (Na⁺ and Ca²⁺), being higher in the presence of Ca²⁺. Binding occurs preferentially in regions of closely packed lipids. Strikingly, DS did not affect the stability against detergent and the membrane rigidity of none of the vesicles. Thus, the proposed stability increase induced by this kind of polymers in drug delivery systems is not related with a modulation of the membrane thermodynamic properties but to other biochemical factors.

Discrepancies in the in vitro and in vivo role of scavenger receptors in clearance of nanoparticles by Kupffer cells

Nanoparticles are recognized and cleared by Kupffer cells (KCs) in the liver. This process complicates the development of targeted nanoparticles because of significant reduction of number of nanoparticles that can reach target tissues. Macrophage scavenger receptor SR type AI/II is the central phagocytic receptor that has been shown to promote in vitro uptake of many nanoparticle types. In this paper, the authors set out to clarify the role of SR-AI/II in the in vivo liver clearance of 10kDa dextran superparamagnetic iron oxide (SPIO) Feridex-IV® and 20kDa dextran-coated SPIO nanoworms (SPIO NWs). Feridex showed efficient SR-AI/II-dependent uptake by isolated KCs in vitro, whereas SPIO NWs showed no uptake by KCs. Both Feridex and SPIO NWs showed a very short and nearly identical circulation half-life and efficient uptake by KCs in vivo. The SR-AI/II inhibitor, polyinosinic acid, prolonged the circulation half-life of both Feridex and SPIO NWs, but did not reduce the KC uptake. The circulation half-life and KC uptake of Feridex and SPIO NWs were identical in SR-AI/II-deficient mice and wild-type mice. These data suggest: (1) there is a limited correlation between in vitro and in vivo uptake mechanisms of nanoparticles in KCs; and (2) redundant, SR-AI/II independent mechanisms play a significant role in the nanoparticle recognition by KCs in vivo. Understanding the complexity of nanoparticle clearance assays and mechanisms is an important step to improving the design of “stealthy” nanoparticles.

Concepts and Methods of Solid-State NMR Spectroscopy Applied to Biomembranes

Concepts of solid-state NMR spectroscopy and applications to fluid membranes are reviewed in this paper. Membrane lipids with ²H-labeled acyl chains or polar head groups are studied using ²H NMR to yield knowledge of their atomistic structures in relation to equilibrium properties. This review demonstrates the principles and applications of solid-state NMR by unifying dipolar and quadrupolar interactions and highlights the unique features offered by solid-state ²H NMR with experimental illustrations. For randomly oriented multilamellar lipids or aligned membranes, solid-state ²H NMR enables direct measurement of residual quadrupolar couplings (RQCs) due to individual C-²H-labeled segments. The distribution of RQC values gives nearly complete profiles of the segmental order parameters S_CD⁽ⁱ⁾ as a function of acyl segment position (i). Alternatively, one can measure residual dipolar couplings (RDCs) for natural abundance lipid samples to obtain segmental S_CH order parameters. A theoretical mean-torque model provides acyl-packing profiles representing the cumulative chain extension along the normal to the aqueous interface. Equilibrium structural properties of fluid bilayers and various thermodynamic quantities can then be calculated, which describe the interactions with cholesterol, detergents, peptides, and integral membrane proteins and formation of lipid rafts. One can also obtain direct information for membrane-bound peptides or proteins by measuring RDCs using magic-angle spinning (MAS) in combination with dipolar recoupling methods. Solid-state NMR methods have been extensively applied to characterize model membranes and membrane-bound peptides and proteins, giving unique information on their conformations, orientations, and interactions in the natural liquid-crystalline state.

Calcium binding-mediated sustained release of minocycline from hydrophilic multilayer coatings targeting infection and inflammation

Infection and inflammation are common complications that seriously affect the functionality and longevity of implanted medical implants. Systemic administration of antibiotics and anti-inflammatory drugs often cannot achieve sufficient local concentration to be effective, and elicits serious side effects. Local delivery of therapeutics from drug-eluting coatings presents a promising solution. However, hydrophobic and thick coatings are commonly used to ensure sufficient drug loading and sustained release, which may limit tissue integration and tissue device communications. A calcium-mediated drug delivery mechanism was developed and characterized in this study. This novel mechanism allows controlled, sustained release of minocycline, an effective antibiotic and anti-inflammatory drug, from nanoscale thin hydrophilic polyelectrolyte multilayers for over 35 days at physiologically relevant concentrations. pH-responsive minocycline release was observed as the chelation between minocycline and Ca(2+) is less stable at acidic pH, enabling 'smart' drug delivery in response to infection and/or inflammation-induced tissue acidosis. The release kinetics of minocycline can be controlled by varying initial loading, Ca(2+) concentration, and Ca(2+) incorporation into different layers, enabling facile development of implant coatings with versatile release kinetics. This drug delivery platform can potentially be used for releasing any drug that has high Ca(2+) binding affinity, enabling its use in a variety of biomedical applications.

The structure of ions and zwitterionic lipids regulates the charge of dipolar membranes

In pure water, zwitterionic lipids form lamellar phases with an equilibrium water gap on the order of 2 to 3 nm as a result of the dominating van der Waals attraction between dipolar bilayers. Monovalent ions can swell those neutral lamellae by a small amount. Divalent ions can adsorb onto dipolar membranes and charge them. Using solution X-ray scattering, we studied how the structure of ions and zwitterionic lipids regulates the charge of dipolar membranes. We found that unlike monovalent ions that weakly interact with all of the examined dipolar membranes, divalent and trivalent ions adsorb onto membranes containing lipids with saturated tails, with an association constant on the order of ∼10 M(-1). One double bond in the lipid tail is sufficient to prevent divalent ion adsorption. We suggest that this behavior is due to the relatively loose packing of lipids with unsaturated tails that increases the area per lipid headgroup, enabling their free rotation. Divalent ion adsorption links two lipids and limits their free rotation. The ion-dipole interaction gained by the adsorption of the ions onto unsaturated membranes is insufficient to compensate for the loss of headgroup free-rotational entropy. The ion-dipole interaction is stronger for cations with a higher valence. Nevertheless, polyamines behave as monovalent ions near dipolar interfaces in the sense that they interact weakly with the membrane surface, whereas in the bulk their behavior is similar to that of multivalent cations. Advanced data analysis and comparison with theory provide insight into the structure and interactions between ion-induced regulated charged interfaces. This study models biologically relevant interactions between cell membranes and various ions and the manner in which the lipid structure governs those interactions. The ability to monitor these interactions creates a tool for probing systems that are more complex and forms the basis for controlling the interactions between dipolar membranes and charged proteins or biopolymers for encapsulation and delivery applications.

Interaction of heparins and dextran sulfates with a mesoscopic protein nanopore

A mechanism of how polyanions influence the channel formed by Staphylococcus aureus alpha-hemolysin is described. We demonstrate that the probability of several types of polyanions to block the ion channel depends on the presence of divalent cations and the polyanion molecular weight and concentration. For heparins, a 10-fold increase in molecular weight decreases the half-maximal inhibitory concentration, IC(50), nearly 10(4)-fold. Dextran sulfates were less effective at blocking the channel. The polyanions are significantly more effective at reducing the conductance when added to the trans side of this channel. Lastly, the effectiveness of heparins on the channel conductance correlated with their influence on the zeta-potential of liposomes. A model that includes the binding of polyanions to the channel-membrane complex via Ca(2+)-bridges and the asymmetry of the channel structure describes the data adequately. Analysis of the single channel current noise of wild-type and site-directed mutant versions of alpha-hemolysin channels suggests that a single polyanion enters the pore due to electrostatic forces and physically blocks the ion conduction path. The results might be of interest for pharmacology, biomedicine, and research aiming to design mesoscopic pore blockers.

Flexible macromolecules attached to lipid bilayers: impact on fluidity, curvature, permeability and stability of the membranes

This review summarizes recent investigations on the association of macromolecules on lipid bilayers. Hydrophilic and flexible polymers can form soft coronae tenuously adsorbed or anchored on the lipid membrane. Other synthetic macromolecules are embedded in the apolar region of the membrane. Recent experimental and theoretical works focus on the perturbation of lipid properties achieved depending on the nature and strength of binding. Of importance to biomimicry, to tethered model membranes, and drug carriers, the effects achievable include modulation of the lateral diffusivity of lipids, shape distortions, lateral segregations, formation of well-defined nanopores and ultimately the stimuli responsive disruption of the membrane.

The nucleolar channel system of human endometrium is related to endoplasmic reticulum and R-rings

The nucleolar channel system (NCS) is a well-established ultrastructural hallmark of the postovulation endometrium. Its transient presence has been associated with human fertility. Nevertheless, the biogenesis, composition, and function of these intranuclear membrane cisternae are unknown. Membrane systems with a striking ultrastructural resemblance to the NCS, termed R-rings, are induced in nuclei of tissue culture cells by overexpression of the central repeat domain of the nucleolar protein Nopp140. Here we provide a first molecular characterization of the NCS and compare the biogenesis of these two enigmatic organelles. Like the R-rings, the NCS consists of endoplasmic reticulum harboring the marker glucose-6-phosphatase. R-ring formation initiates at the nuclear envelope, apparently by a calcium-mediated Nopp140-membrane interaction, as supported by the calcium-binding ability of Nopp140, the inhibition of R-ring formation by calcium chelators, and the concentration of Nopp140 and complexed calcium in R-rings. Although biogenesis of the NCS may initiate similarly, the reduced presence of complexed calcium and Nopp140 suggests the involvement of additional factors.

Effects of divalent cations on the formation and structure of solid supported lipid films

The interaction of glassy carbon-supported thin wetting films of lecithin with some divalent cations is investigated by impedimetry and voltammetry. The influence of Ca2+, Mg2+, and Mn2+ on the film structure is explored in two different cases--the divalent cations are added to the electrolyte either before or after the formation of the film. When the film has been previously formed, the addition of divalent cations in millimolar concentrations leads to changes in the passive electrical parameters and the blocking properties of the films. On the one hand the dielectric properties of the film measured in 0.1 M KCl seem to improve after the interaction with divalent cations--the film capacitance decreases, the resistance and resistivity of the film increase. On the other hand the increase of the redox current in the presence of 1 mM Fe(CN)6(3-/4-) in the electrolyte suggests the formation of some defects in the lipid structure of the film after the action of divalent cations. It is shown that the amount of these defects could be significantly decreased when the divalent cations are present in the electrolyte solution before the film formation. The effect of divalent cations on the film stability is tested by applying negative potential to the film. In 0.1 M KCl the films are not stable at potential of - 0.8 V (vs. Ag/AgCl) and are destroyed. The addition of divalent cations stabilizes the films and at certain millimolar concentrations the films remain intact after the action of the negative potential. The effect of Mn2+ is more pronounced, the Ca2+ and Mg2+ have smaller commensurate effect. It is proposed that the changes in the films' properties could be related with more tight packing of the lipid molecules with the divalent cations inserted in the film and that some defects could be opened during the rearrangement of the lipids when the film has been previously formed.

DNA condensation and interaction with zwitterionic phospholipids mediated by divalent cations

Artificial viruses are considered to be a promising tool in gene therapy. To find lipid-DNA complexes with high transfection efficiency but without toxicity is a fundamental aim. Although cationic lipids are frequently toxic for cells, neutral lipids are completely nontoxic. Zwitterionic lipids do not interact with DNA directly; however, the interaction can be mediated by divalent cations. Langmuir monolayers represent a well-defined model system to study the DNA-lipid complexes at the air/water interface (quasi-2D systems). In this work, isotherms, infrared reflection absorption spectroscopy (IRRAS), X-ray reflectivity (XR), grazing incidence X-ray diffraction (GIXD), and Brewster angle microscopy (BAM) measurements are used to study the interaction of calf thymus DNA with DMPE (1,2-dimyristoyl-phosphatidylethanolamine) monolayers mediated by Ca2+ or Mg2+ ions. DNA adsorption is observed only in the presence of divalent cations. At low lateral pressure, the DNA partially penetrates into the lipid monolayer but is squeezed out at high pressure. The adsorption layer has a thickness of 18-19 A. Additionally, GIXD provides information about a one-dimensional ordering of adsorbed DNA. The periodic distance between DNA strands depends on the type of the divalent cation.

Chondroitin 6-sulfate and dextran sulfate promote hypochlorite-induced peroxidation of phosphatidylcholine liposomes

In this work, we studied whether chondroitin sulfates and dextran sulfates (DXSs) can influence hypochlorite-induced peroxidation of phosphatidylcholine (PC) liposomes. Multilamellar liposomes (2 mg lipid/ml) were prepared in phosphate buffer, pH 7.4, with NaCl or not and exposed to reagent HOCl/ClO- (1mM) at 37 degrees C in the presence of different concentrations of chondroitin 6-sulfate (C6S), chondroitin 4-sulfate (C4S), DXS 8000, DXS 40,000, and DXS 500,000. Lipid peroxidation was assessed by thiobarbituric acid-reactive substance (TBARS) production. DXSs and C6S enhanced TBARS production in a dose-dependent manner. The decline in TBARS production at the relatively high C6S concentrations may be attributed to C4S present in C6S, since in contrast to C6S, C4S is known to react with hypochlorite. Dextrans, nonsulfated analogues of DXS, failed to modulate TBARS production. This fact indicates the important role of negatively charged sulfate groups for DXS to facilitate hypochlorite-induced peroxidation of PC liposomes. The electrostatic nature of the mechanism providing for the pro-oxidative effect of DXS was also supported by the influence of liposome surface charge and solution ionic strength on the extent of liposome peroxidation. The addition of calcium ions to the incubation mixture did not prevent the pro-oxidative action of DXS. The relevance of the results to atherogenesis is discussed.

Interfacial interaction between dextran sulfate and lipid monolayers: an electrochemical study

The interaction between dextran sulfate (DS) with zwitterionic dipalmitoylphosphatidylcholine (DPPC) and negatively charged dipalmitoylphosphatidic acid monolayers at different surface pressures at air-liquid and liquid-liquid interfaces was studied using Langmuir-Blodgett (LB) and electrochemical techniques. The negatively charged DS can bind to phospholipids via calcium ions. To investigate the mechanism of the adsorption of DS on lipid monolayers, compression isotherms (pi-A) and capacitance-potential curves were measured, and a theoretical model was developed to interpret the capacitance data. The compression of lipid monolayers in the presence of DS led to a more condensed hybrid layer, removing the LE-LC phase transition of DPPC. Lower surface pressures improved the binding of DS on the lipid monolayers via calcium bridges due to the electrostatic attraction. Alternating current voltammetry and cyclic voltammetry were used to monitor the transfer of a cationic beta-blocker (metoprolol) across lipid monolayers in the absence and presence of the polyelectrolyte and to compare with the transfer of the standard probe, tetraethylammonium cation. Results showed a strong dependence on (i) the surface pressure, (ii) the applied potential, and, (iii) in the case of the hybrid layer, the charge of the phospholipid headgroup. Finally, results were also confirmed by attenuated total reflection Fourier transform infrared spectroscopy, performed after transferring lipid multilayers onto a solid substrate by the LB method.

Interaction of poly(L-lysine)-g-poly(ethylene glycol) with supported phospholipid bilayers

Interactions between the graft copolymer poly(L-lysine)-g-poly(ethylene glycol), PLL-g-PEG, and two kinds of surface-supported lipidic systems (supported phospholipid bilayers and supported vesicular layers) were investigated by a combination of microscopic and spectroscopic techniques. It was found that the application of the copolymer to zwitterionic or negatively charged supported bilayers in a buffer of low ionic strength led to their decomposition, with the resulting formation of free copolymer-lipid complexes. The same copolymer had no destructive effect on a supported vesicular layer made up of vesicles of identical composition. A comparison between poly(L-lysine), which did not induce decomposition of supported bilayers, and PLL-g-PEG copolymers with various amounts of PEG side chains per backbone lysine unit, suggested that steric repulsion between the PEG chains that developed upon adsorption of the polymer to the nearly planar surface of a supported phospholipid bilayer (SPB) was one of the factors responsible for the destruction of the SPBs by the copolymer. Other factors included the ionic strength of the buffer used and the quality of the bilayers, pointing toward the important role defects present in the SPBs play in the decomposition process.

Model study of interactions of high-molecular dextran sulfate with lipid monolayers and foam films

The interaction of high-molecular dextran sulfate (DS-5000) with dimyristoylphosphatidylcholine (DMPC) monolayers and foam films (FF) at the air-water interface in the presence of Ca2+ and Na+ ions was studied. DS-5000 was added in monolayer films (MF) and in FF as monomer molecules and in liposomal form. When added in liposomal form in FF, DS-5000 decreased the stability of DMPC common black films (CBF), and no formation of Newton black films (NBF) was observed. However, when included as monomer molecules in FF, DS-5000 caused film thinning, and drastically decreased the expansion rate of the black spots and transition of thick films to NBF, thus avoiding formation of CBF. The above effects were observed in both gel and liquid-crystalline phase states of DMPC in the presence of Ca2+ ions only, and not in the presence of Na+ ions. We postulate that the interaction of DMPC with DS-5000 in the plane of FF is mediated by Ca2+ bridges and results in dehydration of the DMPC polar heads. The interaction between DMPC and DS-5000 in monolayers resulted in slower adsorption and spreading of DMPC molecules at the interface, lower monolayer surface pressure, and penetration of DS-5000 molecules to DMPC monolayers when surface lipid density was higher than 50 A2 per DMPC molecule. The applicability of the FF model for studying the interactions of phospholipids with polysaccharides at interfaces surrounded by bulk solution, and for modeling such interactions in biological systems, e.g. LDL adhesion to the arterial walls, aggregation and fusion of liposomes, etc., is discussed.

Intranuclear endoplasmic reticulum induced by Nopp140 mimics the nucleolar channel system of human endometrium

Exogenous expression of the characteristic repeat domain of the nucleolar chaperone Nopp140 induces the formation of intranuclear structures, termed R-rings. Here, the R-rings are identified as extensive stacks of membrane cisternae in the otherwise membrane-free nucleus. They consist of bona fide endoplasmic reticulum (ER) containing integral membrane proteins of the smooth and rough ER. Although lacking nuclear pore complexes and lamina, the R-rings derive specifically from the inner nuclear membrane. These findings are consistent with the idea that all transmembrane proteins synthesized in the ER and the outer nuclear membrane can freely diffuse through the pore membrane domain into the inner membrane. Uniquely, the soluble transfected Nopp140 is directly involved in the generation of these membrane stacks as it localizes to the electron dense matrix in which they are embedded. The only well-documented example of intranuclear membrane proliferation is the nucleolar channel system of the postovulation human endometrium. The transient emergence of the nucleolar channel system correlates precisely with the readiness of the endometrium for the implantation of the fertilized egg. The nucleolar channel system exhibits an ultrastructure that is indistinguishable from R-rings, and nuclei of human endometrium harbor Nopp140 and ER marker containing structures. Therefore, the nucleolar channel system appears to be identical to the R-rings, suggesting a role for Nopp140 in human reproduction.

Investigation of phospholipid area compression induced by calcium-mediated dextran sulfate interaction

The association of anionic polyelectrolytes such as dextran sulfate (DS) to zwitterionic phospholipid surfaces via Ca(2+) bridges results in a perturbation of lipid packing at physiologically relevant Ca(2+) concentrations. Lipid area compression was investigated in 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) multilamellar bilayer dispersions by (2)H-NMR and in monolayer studies. Binding of DS to DMPC surfaces via Ca(2+) results in denser lipid packing, as indicated by higher lipid chain order. DMPC order parameters are homogeneously increased throughout the lipid bilayer. Higher order translates into more extended hydrocarbon chains and decreased average lipid area per molecule. Area compression is reported as a function of DS concentration and molecular weight. Altering the NaCl and Ca(2+) concentrations modified electrostatic interactions between DS and phospholipid. A maximal area reduction of DeltaA = 2.7 A(2) per DMPC molecule is observed. The lipid main-phase transition temperature increases upon formation of DMPC/Ca(2+)/DS-complexes. Lipid area compression after addition of DS and Ca(2+) to the subphase was also observed in monolayer experiments. A decrease in surface tension of up to 3.5 mN/m at constant molecular area was observed. DS binds to the lipid headgroups by formation of Ca(2+) bridges without penetrating the hydrophobic region. We suggest that area compression is the result of an attractive electrostatic interaction between neighboring lipid molecules induced by high local Ca(2+) concentration due to the presence of DS. X-ray diffraction experiments demonstrate that DS binding to apposing bilayers reduces bilayer separation. We speculate that DS binding alters the phase state of low-density lipoproteins that associate with polyelectrolytes of the arterial connective tissue in the early stages of arteriosclerosis.