Synthesis, control of substitution pattern and phase transitions of 2,3-di-O-methylcellulose

Advanced characterization of regioselectively substituted methylcellulose model compounds by DNP enhanced solid-state NMR spectroscopy

Dynamic Nuclear Polarization MAS NMR is introduced to characterize model methylcellulose ether compounds at natural isotopic abundance. In particular an approach is provided to determine the position of the methyl ether group within the repeating unit. Specifically, natural abundance ¹³C-¹³C correlation experiments are used to characterize model 3-O-methylcellulose and 2,3-O-dimethylcellulose, and identify changes in chemical shifts with respect to native cellulose. We also probe the use of through space connectivity to the closest carbons to the CH₃ to identify the substitution site on the cellulose ether. To this end, a series of methylcellulose ethers was prepared by a multistep synthesis approach. Key intermediates in these reactions were 2,6-O-diprotected thexyldimethylsilyl (TDMS) cellulose and 6-O-monoprotected TDMS cellulose methylated under homogeneous conditions. The products had degrees of substitution of 0.99 (3-O-methylcellulose) and 2.03 (2,3-O-dimethylcellulose) with exclusively regioselective substitution. The approaches developed here will allow characterization of the substitution patterns in cellulose ethers.

Determination of mole fractions of ethyl-cellulose-containing monomers by NMR

Three samples of ethyl cellulose (EC) with different degrees of substitution (DS)-0.51, 1.41, and 2.28-were prepared by a slurry method using ethyl bromide as the etherification reagent. ¹H-¹³C HSQC and HSQC-TOCSY NMR spectral analysis allowed for complete assignment of the ¹H and ¹³C chemical shifts, respectively, of eight anhydroglucose units (AGUs) comprising EC chains-un-, 2-mono-, 3-mono-, 6-mono-, 2,3-di-, 2,6-di-, 3,6-di-, and 2,3,6-tri-substituted AGUs. In addition, the lineshape of the quantitative ¹³C NMR spectra of the three EC samples provided change in the mole fractions of these AGUs against DS, making it possible to estimate the reaction mechanism for the production of EC, elucidating reactivities of the hydroxyl groups at the 2, 3, and 6 positions of cellulose and interactions between the substituent groups within the same AGU and vicinal AGUs.

Enzymic degradation of hydroxyethyl cellulose and analysis of the substitution pattern along the polysaccharide chain

The enzymatic degradation behavior of hydroxyethyl cellulose (HEC) samples with different molar substitutions (MS) values was investigated. The changes in the molecular structure of HEC treated with enzymatic approach in comparison to the native HEC were studied through nuclear magnetic resonance (NMR), fourier transform infrared spectra (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques and kinetics of degradation was studied by viscometry. The cleavage of HEC chains could be observed from FTIR and kinetics results. Moreover, reduce in molecular weight (Mw) of polymer and liberated glucose concentration was investigated by gel permeation chromatography (GPC) analysis during enzymatic degradation. And all these results indicated that HEC with lower MS is more susceptible to degrade and provided a better understanding of the mechanism operating during enzymatic hydrolysis of HEC by cellulases. Furthermore, by complete degradation and quantification of liberated glucose, the substitution index (SI) and the distribution of substituents along the HEC chain were investigated. The results suggested that the HEC samples differed in hydroxyethyl molar substitutions (MS) and possible distribution of the hydroxyethyl groups. Impressively, our efforts established a facile analytical method for the elucidation of the distribution of substituents along the HEC chain.

Conjugates of methylated cyclodextrin derivatives and hydroxyethyl starch (HES): Synthesis, cytotoxicity and inclusion of anaesthetic actives

The mono-6-deoxy-6-azides of 2,6-di-O-methyl-β-cyclodextrin (DIMEB) and randomly methylated-β-cyclodextrin (RAMEB) were conjugated to propargylated hydroxyethyl starch (HES) by Cu(+)-catalysed [2 + 3] cycloaddition. The resulting water soluble polymers showed lower critical solution temperatures (LCST) at 52.5 °C (DIMEB-HES) and 84.5 °C (RAMEB-HES), respectively. LCST phase separations could be completely avoided by the introduction of a small amount of carboxylate groups at the HES backbone. The methylated CDs conjugated to the HES backbone exhibited significantly lower cytotoxicities than the corresponding monomeric CD derivatives. Since the binding potentials of these CD conjugates were very high, they are promising candidates for new oral dosage forms of anaesthetic actives.

Synthesis of uniform cyclodextrin thioethers to transport hydrophobic drugs

Methyl and ethyl thioether groups were introduced at all primary positions of α-, β-, and γ-cyclodextrin by nucleophilic displacement reactions starting from the corresponding per-(6-deoxy-6-bromo)cyclodextrins. Further modification of all 2-OH positions by etherification with iodo terminated triethylene glycol monomethyl ether (and tetraethylene glycol monomethyl ether, respectively) furnished water-soluble hosts. Especially the β-cyclodextrin derivatives exhibit very high binding potentials towards the anaesthetic drugs sevoflurane and halothane. Since the resulting inclusion compounds are highly soluble in water at temperatures ≤37 °C they are good candidates for new aqueous dosage forms which would avoid inhalation anaesthesia.

Structure and properties of aqueous methylcellulose gels by small-angle neutron scattering

Cold, semidilute, aqueous solutions of methylcellulose (MC) are known to undergo thermoreversible gelation when warmed. This study focuses on two MC materials with much different gelation performance (gel temperature and hot gel modulus) even though they have similar metrics of their coarse-grained chemical structure (degree-of-methylether substitution and molecular weight distribution). Small-angle neutron scattering (SANS) experiments were conducted to probe the structure of the aqueous MC materials at pre- and postgel temperatures. One material (MC1, higher gel temperature) exhibited a single almost temperature-insensitive gel characteristic length scale (ζ(c) = 1090 ± 50 Å) at postgelation temperatures. This length scale is thought to be the gel blob size between network junctions. It also coincides with the length scale between entanglement sites measured with rheology studies at pregel temperatures. The other material (MC2, lower gel temperature) exhibited two distinct length scales at all temperatures. The larger length scale decreased as temperature increased. Its value (ζ(c1) = 1046 ± 19 Å) at the lowest pregel temperature was indistinguishable from that measured for MC1, and reached a limiting value (ζ(c1) = 450 ± 19 Å) at high temperature. The smaller length scale (ζ(c2) = 120 to 240 Å) increased slightly as temperature increased, but remained on the order of the chain persistence length (130 Å) measured at pregel temperatures. The smaller blob size (ζ(c1)) of MC2 suggests a higher bond energy or a stiffer connectivity between network junctions. Moreover, the number density of these blobs, at the same reduced temperature with respect to the gel temperature, is orders of magnitude higher for the MC2 gels. Presumably, the smaller gel length scale and higher number density lead to higher hot gel modulus for the low gel temperature material.

Regioselective esterification and etherification of cellulose: a review

Deep understanding of the structure-property relationships of polysaccharide derivatives depends on the ability to control the position of the substituents around the monosaccharide ring and along the chain. Equally important is the ability to analyze position of substitution. Historically, both synthetic control and analysis of regiochemistry have been very difficult for cellulose derivatives, as for most other polysaccharide derivatives. With the advent of cellulose solvents that are suitable for chemical transformations, it has become possible to carry out cellulose derivatization under conditions sufficiently mild to permit increasingly complete regiochemical control, particularly with regard to the position of the substituents around the anhydroglucose ring. In addition, new techniques for forming cellulose and its derivatives from monomers, either by enzyme-catalyzed processes or chemical polymerization, permit us to address new frontiers in regiochemical control. We review these exciting developments in regiocontrolled synthesis of cellulose derivatives and their implications for in-depth structure-property studies.

Chemical structure analysis of starch and cellulose derivatives

Starch and cellulose are the most abundant and important representatives of renewable biomass. Since the mid-19th century their properties have been changed by chemical modification for commercial and scientific purposes, and there substituted polymers have found a wide range of applications. However, the inherent polydispersity and supramolecular organization of starch and cellulose cause the products resulting from their modification to display high complexity. Chemical composition analysis of these mixtures is therefore a challenging task. Detailed knowledge on substitution patterns is fundamental for understanding structure-property relationships in modified cellulose and starch, and thus also for the improvement of reproducibility and rational design of properties. Substitution patterns resulting from kinetically or thermodynamically controlled reactions show certain preferences for the three available hydroxyl functions in (1→4)-linked glucans. Spurlin, seventy years ago, was the first to describe this in an idealized model, and nowadays this model has been extended and related to the next hierarchical levels, namely, the substituent distribution in and over the polymer chains. This structural complexity, with its implications for data interpretation, and the analytical approaches developed for its investigation are outlined in this article. Strategies and methods for the determination of the average degree of substitution (DS), monomer composition, and substitution patterns at the polymer level are presented and discussed with respect to their limitations and interpretability. Nuclear magnetic resonance spectroscopy, chromatography, capillary electrophoresis, and modern mass spectrometry (MS), including tandem MS, are the main instrumental techniques employed, in combination with appropriate sample preparation by chemical and enzymatic methods.

Cellulose: fascinating biopolymer and sustainable raw material

As the most important skeletal component in plants, the polysaccharide cellulose is an almost inexhaustible polymeric raw material with fascinating structure and properties. Formed by the repeated connection of D-glucose building blocks, the highly functionalized, linear stiff-chain homopolymer is characterized by its hydrophilicity, chirality, biodegradability, broad chemical modifying capacity, and its formation of versatile semicrystalline fiber morphologies. In view of the considerable increase in interdisciplinary cellulose research and product development over the past decade worldwide, this paper assembles the current knowledge in the structure and chemistry of cellulose, and in the development of innovative cellulose esters and ethers for coatings, films, membranes, building materials, drilling techniques, pharmaceuticals, and foodstuffs. New frontiers, including environmentally friendly cellulose fiber technologies, bacterial cellulose biomaterials, and in-vitro syntheses of cellulose are highlighted together with future aims, strategies, and perspectives of cellulose research and its applications.

Preparation and Characterization of Monolayer and Multilayer Langmuir−Blodgett Films of a Series of 6-O-Alkylcelluloses

Monolayer and multilayer Langmuir-Blodgett (LB) films of 6-O-alkylcelluloses with various chain lengths were prepared and studied. The surface pressure (pi)-area (A) isotherms of 6-O-alkylcelluloses exhibited characteristic behaviors depending on the length of the alkyl chain and temperature. 6-O-Stearylcellulose on the subphase formed a homogeneous monolayer at 10 mN m(-1). By transfer ratio, FT-IR, and contact angle measurements, it was proved that the monolayer of 6-O-stearylcellulose on the water surface was transferred successfully onto a substrate by a vertical dipping method to form a Z-type LB film. The transmission and reflection absorption IR spectrum indicated that the hydrocarbon chains had all-trans rotamers and were oriented nearly perpendicular to the surface in the film. AFM section analysis revealed that the thickness per layer was calculated to be 2.35 nm. These results suggested that the hydrocarbon chains were inclined at an angle of about 25.3 degrees to have high packing density in the alkyl region.

Microchip Immobilized Enzyme Reactors for Hydrolysis of Methyl Cellulose

Microchip immobilized enzyme reactors (microIMERs) with immobilized endoglucanases were applied for the hydrolysis of methyl cellulose (MC). MCs of various molecular weights were hydrolyzed using two microIMERs containing immobilized celloendoglucanase Cel 5A from Bacillus agaradhaerens (BaCel 5A) connected in series. Hydrolysis by the microIMER could be confirmed from the average molar masses and molar mass distributions measured by size exclusion chromatography (SEC) with online multiangle light scattering and refractive index detection. Methylated cellooligosaccharides with degrees of polymerization (DP) between 1 and 6 formed during hydrolysis were analyzed by direct infusion electrospray ionization ion-trap mass spectrometry (ESI-ITMS). Mass spectra of microIMER- and batch-hydrolyzed samples were compared and no significant differences were found, indicating that microIMER hydrolysis was as efficient as conventional batch hydrolysis. A fast and automated hydrolysis with online MS detection was achieved by connecting the microIMER to high-performance liquid chromatography and ESI-ITMS. This online separation reduced the relative intensities of interfering signals and increased the signal-to-noise ratios in MS. The microIMER hydrolysates were also subjected to SEC interfaced with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. With this technique, oligomers with DP 3-30 could be detected. The hydrolysis by the microIMER was performed within 60 min, i.e. significantly faster compared with batch hydrolysis usually performed for at least 24 h. The microIMER also allowed hydrolysis after 10 days of continuous use. The method presented in this work offers new approaches for the analysis of derivatized cellulose and provides the possibility of convenient online, fast, and more versatile analysis compared with the traditional batch method.

Analytical Approaches to Improved Characterization of Substitution in Hydroxypropyl Cellulose

Chemical characterization of cellulose derivatives is of high importance as it provides information about the often inhomogeneous substitution that may seriously affect the properties of these polymers in various applications. A detailed mapping of the chemical structure of these derivatives requires several advanced techniques to be employed. In this study, the average substitution and the substitution heterogeneity in two hydroxypropyl cellulose (HPC) samples from different suppliers were studied by means of NMR spectroscopy, MALDI-TOF MS, and HPAEC-PAD. (1)H and (13)C NMR provided information on the molar substitution, a parameter that could be analyzed by MALDI-TOF MS as well. In addition, the latter technique was used for determination of the distribution of the number of hydroxypropyl groups per glucose unit present in the two polymers. The heterogeneity of the substitution was studied by determining the amount of unsubstituted glucose units in the HPC samples, which was accomplished by HPAEC-PAD analysis. The results obtained suggest that the two HPC samples differ in both hydroxypropoxy content and distribution of the hydroxypropyl groups. Further, the benefits and importance of employing several analytical methods when investigating the cellulose ether substitution are demonstrated, as each method provides different kinds of information on the chemical content.

Synthesis and characterization of 2,3-di-O-alkylated amyloses: hydrophobic substitution destabilizes helical conformation

Amylose was selectively alkylated in the 2,3-O position of each anhydroglucose unit after trityl protection of the 6-OH groups. Alkyl iodides of varying chain length (C(2), C(5), C(8)) were coupled to amylose, and degrees of substitution (DSs) were varied between 0.3 and 1.8, as assessed by NMR analysis. Increasing amounts of methyl groups per anhydroglucose unit increased solubility in nonaqueous media, while at the same time reducing the ability of modified amylose to form a complex with iodine. The tendency to form inclusion complexes with the surfactant N-dodecyl pyridinium bromide decreased in the order beta-cyclodextrin >> amylose approximately solubilized starch, indicating that the frozen macrocycle of beta-cyclodextrin was the most efficient inclusion host. Introduction of the bulky trityl group abolished the helical amylose conformation, which is not readily reassumed in the presence of hydrophobic substitution of the C2 and C3 positions. These results indicated that a polar outer surface is necessary but not sufficient for the formation of a stable amylose helix.

A new model for the substitution patterns in the polymer chain of polysaccharide derivatives

A new mathematical model is presented for the analysis of the substituent distribution in the polymer chain of polysaccharide derivatives. For the first time, the influence of substitution on the reactivity of neighbored monomer units is taken into account. The model was applied to various cellulose and amylose ethers and esters and excellently fits the experimental data.