Particle transport and capture at the membrane surface in cross-flow microfiltration

Crude Oil Drop Penetration into Permeates Using a Slotted Pore Membrane

The primary focus of the presented research is to come up with a model that could be utilized to evaluate the permeate content (concentration) of oil drops using a straight (nonconverging) slotted microstructured membrane. The content (concentration) of crude drops in the permeate with a nonconverging slit structure membrane has not been studied before, and the study presented would be a good contribution to the literature. A comparison between the use of a converging (narrowing toward the inside) and a nonconverging slotted pore microstructured membrane is made for the purpose of removing oil content from the produced water. Due to the drag force, the droplets pass through the membrane slots; however, the static force acts in the opposite direction and tries to reject droplets by the membrane. At a certain point, these two forces balance the effect of each other, which is known as "100% cutoff through the membrane". A linear line is obtained by joining the 100% cutoff or rejection point to the 0% rejection point, which is referred to as the "linear fit" in this paper. The linear fit approach could be utilized for estimating rejection below the 100% cutoff point. Various types of crude oil drops obtained from different locations were analyzed experimentally, and the results were compared with the presented model. The proposed model was found to be in agreement with the different types of oil drops. Experimental and predicted results showed that the nonconverging slotted microstructured membrane provided low friction to oil drops through the membrane as compared to the converging slots. Furthermore, the developed model can be utilized to predict the overall oil content in the permeate. This research has great importance and will allow researchers around the globe to estimate crude oil concentration within the allowable limits.

Monte Carlo simulation of pore blocking phenomena in cross-flow microfiltration

An off-lattice Monte Carlo method was developed to examine the pore blocking phenomena in cross-flow microfiltration. Membranes were generated by randomly distributed pores with a given pore size distribution on a two-dimensional plane. The permeability of particles through the membrane pores was calculated, and the effects of crucial factors on the reduction of permeability were discussed. Reasonable fouling rules for simulations were examined and selected. At the initial stage the flux decreases sharply as the filtration time increases and then a steady state is reached. The results fit the pore blocking mechanism well. The simulation model developed in this study can be effectively used for analyzing a number of factors influencing physical fouling of membranes.

Colloidal surface interactions and membrane fouling: investigations at pore scale

In this paper, we examine the contributions of colloidal surface interaction in filtration processes. In a first part, we describe the way surface interactions affect the transport of colloidal particles or macromolecules towards a membrane, and its theoretical description. The concept of critical flux is introduced and linked to particle-membrane wall and particle-particle surface interactions. From this review, it seems important to consider how surface interactions occur at pore scale and control the development of fouling layers. In this context, we report in a second part experiments where the capture of micron-sized particles is observed in a poly-dimethylsiloxane (PDMS) microfluidic filtration device. Direct observations of the filtering part by video-microscopy allow to investigate the way the fouling of the microchannels by the particles is taking place. The experimental results underline the important role played by the particle-wall interactions on the way particles are captured during filtration. A small change in surface properties of the PDMS has important consequences in the way pore clogging occurs: in more hydrophobic conditions the particles first form arches at the microchannels entrance, then leading to the growth of a filtration cake, whereas in more hydrophilic conditions the particles are captured on the walls between the microchannels, then leading to the progressive formation of dendrites. To conclude, both experimental and theoretical approaches show the important role played by surface interactions in filtration processes. The complex interplay between multi-body surface interactions and hydrodynamics at nanometric scale leads to clogging phenomena observed experimentally in microfluidic systems that have not been predicted by numerical simulations. In the future, the two way coupling between simulation and experimental approaches at the pore scale have to progress in order to reach a full understanding of the contribution of colloid science in membrane processes.