The lipid charge density at the bilayer surface modulates the effects of melittin on membranes

Host Defense Peptide Piscidin and Yeast-Derived Glycolipid Exhibit Synergistic Antimicrobial Action through Concerted Interactions with Membranes

Developing new antimicrobials as alternatives to conventional antibiotics has become an urgent race to eradicate drug-resistant bacteria and to save human lives. Conventionally, antimicrobial molecules are studied independently even though they can be cosecreted in vivo. In this research, we investigate two classes of naturally derived antimicrobials: sophorolipid (SL) esters as modified yeast-derived glycolipid biosurfactants that feature high biocompatibility and low production cost; piscidins, which are host defense peptides (HDPs) from fish. While HDPs such as piscidins target the membrane of pathogens, and thus result in low incidence of resistance, SLs are not well understood on a mechanistic level. Here, we demonstrate that combining SL-hexyl ester (SL-HE) with subinhibitory concentration of piscidins 1 (P1) and 3 (P3) stimulates strong antimicrobial synergy, potentiating a promising therapeutic window. Permeabilization assays and biophysical studies employing circular dichroism, NMR, mass spectrometry, and X-ray diffraction are performed to investigate the mechanism underlying this powerful synergy. We reveal four key mechanistic features underlying the synergistic action: (1) P1/3 binds to SL-HE aggregates, becoming α-helical; (2) piscidin-glycolipid assemblies synergistically accumulate on membranes; (3) SL-HE used alone or bound to P1/3 associates with phospholipid bilayers where it induces defects; (4) piscidin-glycolipid complexes disrupt the bilayer structure more dramatically and differently than either compound alone, with phase separation occurring when both agents are present. Overall, dramatic enhancement in antimicrobial activity is associated with the use of two membrane-active agents, with the glycolipid playing the roles of prefolding the peptide, coordinating the delivery of both agents to bacterial surfaces, recruiting the peptide to the pathogenic membranes, and supporting membrane disruption by the peptide. Given that SLs are ubiquitously and safely used in consumer products, the SL/peptide formulation engineered and mechanistically characterized in this study could represent fertile ground to develop novel synergistic agents against drug-resistant bacteria.

The Effect of Charge on Melittin-Induced Changes in Membrane Structure and Morphology

The binding of melittin to a range of phospholipid bilayers was studied using dual polarisation interferometry and atomic force microscopy. The phospholipid model membranes included zwitterionic dimyristylphosphatidylcholine (DMPC), together with mixtures of DMPC/dimyristylphosphatidylglycerol (DMPG) and DMPC/DMPG/cholesterol. Melittin caused significant disruption on all bilayers, but differences in morphological changes during binding were different on each membrane. Overall, the results demonstrate that the process of membrane disruption follows distinct structural changes for different lipid mixtures irrespective of the strength of binding to the membrane surface.

Role of the Cationic C-Terminal Segment of Melittin on Membrane Fragmentation

The widespread distribution of cationic antimicrobial peptides capable of membrane fragmentation in nature underlines their importance to living organisms. In the present work, we determined the impact of the electrostatic interactions associated with the cationic C-terminal segment of melittin, a 26-amino acid peptide from bee venom (net charge +6), on its binding to model membranes and on the resulting fragmentation. In order to detail the role played by the C-terminal charges, we prepared a melittin analogue for which the four cationic amino acids in positions 21-24 were substituted with the polar residue citrulline, providing a peptide with the same length and amphiphilicity but with a lower net charge (+2). We compared the peptide bilayer affinity and the membrane fragmentation for bilayers prepared from 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC)/1,2-dipalmitoyl-sn-glycero-3-phospho-l-serine (DPPS) mixtures. It is shown that neutralization of the C-terminal considerably increased melittin affinity for zwitterionic membranes. The unfavorable contribution associated with transferring the cationic C-terminal in a less polar environment was reduced, leaving the hydrophobic interactions, which drive the peptide insertion in bilayers, with limited counterbalancing interactions. The presence of negatively charged lipids (DPPS) in bilayers increased melittin binding by introducing attractive electrostatic interactions, the augmentation being, as expected, greater for native melittin than for its citrullinated analogue. The membrane fragmentation power of the peptide was shown to be controlled by electrostatic interactions and could be modulated by the charge carried by both the membrane and the lytic peptide. The analysis of the lipid composition of the extracted fragments from DPPC/DPPS bilayers revealed no lipid specificity. It is proposed that extended phase separations are more susceptible to lead to the extraction of a lipid species in a specific manner than a specific lipid-peptide affinity. The present work on the lipid extraction by melittin and citrullinated melittin with model membranes emphasizes the complex relation between the affinity, the lipid extraction/membrane fragmentation, and the lipid specificity.

Peptide-lipid interactions: experiments and applications

The interactions between peptides and lipids are of fundamental importance in the functioning of numerous membrane-mediated cellular processes including antimicrobial peptide action, hormone-receptor interactions, drug bioavailability across the blood-brain barrier and viral fusion processes. Moreover, a major goal of modern biotechnology is obtaining new potent pharmaceutical agents whose biological action is dependent on the binding of peptides to lipid-bilayers. Several issues need to be addressed such as secondary structure, orientation, oligomerization and localization inside the membrane. At the same time, the structural effects which the peptides cause on the lipid bilayer are important for the interactions and need to be elucidated. The structural characterization of membrane active peptides in membranes is a harsh experimental challenge. It is in fact accepted that no single experimental technique can give a complete structural picture of the interaction, but rather a combination of different techniques is necessary.

The role of electrostatic interactions in the membrane binding of melittin

The binding of melittin and the C-terminally truncated analogue of melittin (21Q) to a range of phospholipid bilayers was studied using surface plasmon resonance (SPR). The phospholipid model membranes included zwitterionic dimyristylphosphatidylcholine (DMPC) and dimyristylphosphatidylethanolamine (DMPE), together with mixtures DMPC/dimyristylphosphatidylglycerol (DMPG), DMPC/DMPG/cholesterol and DMPE/DMPG. Melittin bound rapidly to all membrane mixtures, whereas 21Q, which has a reduced charge, bound much more slowly on the DMPC and DMPC/DMPG mixtures reflecting the role of the initial electrostatic interaction. The loss of the cationic residues also significantly decreased the binding of 21Q with DMPC/DMPG/Cholesterol, DMPE and DMPE/DMPG. The role of electrostatics was also highlighted with NaCl in the buffer, which affected the way melittin bound to the different membranes, causing a more uniform, concentration dependant increase in response. The biosensor results were correlated with the conformation of the peptides determined by circular dichroism analysis, which indicated that high α-helicity was associated with high binding affinity. Overall, the results demonstrate that the positively charged residues at the C-terminus of melittin play an essential role in membrane binding, that modulation of peptide charge influences selectivity of binding to different phospholipids and that manipulation of the cationic regions of antimicrobial peptides can be used to modulate membrane selectivity.

Melittin: a membrane-active peptide with diverse functions

Melittin is the principal toxic component in the venom of the European honey bee Apis mellifera and is a cationic, hemolytic peptide. It is a small linear peptide composed of 26 amino acid residues in which the amino-terminal region is predominantly hydrophobic whereas the carboxy-terminal region is hydrophilic due to the presence of a stretch of positively charged amino acids. This amphiphilic property of melittin has resulted in melittin being used as a suitable model peptide for monitoring lipid-protein interactions in membranes. In this review, the solution and membrane properties of melittin are highlighted, with an emphasis on melittin-membrane interaction using biophysical approaches. The recent applications of melittin in various cellular processes are discussed.

Effect of propyl paraben on the dipalmitoyl phosphatidic acid vesicles

The effect of the preservative propyl paraben (PPB) on the phase transition and dynamics of dipalmitoyl phosphatidic acid (DPPA)-buffer (pH 7.4/9.3) vesicles has been studied using DSC and ((1)H and (31)P) NMR. These investigations were carried out with DPPA dispersion in both multilamellar vesicular (MLV) and unilamellar vesicular (ULV) forms. DSC results indicate that the mechanism by which PPB interact with the DPPA vesicles is similar in MLV and ULV and is independent of pH of the buffer used to form the dispersion. However, for a given concentration of PPB, the perturbation in DPPA bilayer is more when the dispersion is prepared in buffer pH 7.4. PPB affected both the thermotropic phase transition and the molecular mobility of the DPPA membrane. In the presence of PPB, the gel to liquid crystalline phase transition temperature (T(m)) of the DPPA vesicles decreases hence increases membrane fluidity due to reduced headgroup-headgroup interaction. For all concentrations, the PPB molecules seem to get intercalated between the polar groups of the phospholipids with its alkyl chain penetrating into the co-operative region. At high PPB concentration, additional transitions are observed whose intensity increases with increasing PPB concentration. The large enthalpy values obtained at high PPB concentration suggest that presence of PPB makes the DPPA bilayer more ordered (rigid). The interesting finding obtained with MLV is that the stable gel phase of DPPA-buffer (pH 9.3/7.4) system in the presence of high PPB concentration becomes a metastable gel phase, this metastable gel phase on equilibration at 25 degrees C or when cooled to -20 degrees C transforms to a stable crystalline phase(s). The intensity of this new phase(s) increases with increasing PPB concentration. However, the transition temperatures of these new phases are not significantly changed with increasing PPB concentration. The effect of inclusion of cholesterol in the PPB-free and PPB-doped DPPA dispersion was also studied.

The use of solvent relaxation technique to investigate headgroup hydration and protein binding of simple and mixed phosphatidylcholine/surfactant bilayer membranes

The subject of this report was to investigate headgroup hydration and mobility of two types of mixed lipid vesicles, containing nonionic surfactants; straight chain Brij 98, and polysorbat Tween 80, with the same number of oxyethylene units as Brij, but attached via a sorbitan ring to oleic acid. We used the fluorescence solvent relaxation (SR) approach for the purpose and revealed differences between the two systems. Fluorescent solvent relaxation probes (Prodan, Laurdan, Patman) were found to be localized in mixed lipid vesicles similarly as in pure phospholipid bilayers. The SR parameters (i.e. dynamic Stokes shift, Deltanu, and the time course of the correlation function, C(t)) of such labels are in the same range in both kinds of systems. Each type of the tested surfactants has its own impact on water organization in the bilayer headgroup region probed by Patman. Brij 98 does not modify the solvation characteristics of the dye. In contrast, Tween 80 apparently dehydrates the headgroup and decreases its mobility. The SR data measured in lipid bilayers in presence of Interferon alfa-2b reveal that this protein, a candidate for non-invasive delivery, affects the bilayer in a different way than the peptide melittin. Interferon alfa-2b binds to mixed lipid bilayers peripherally, whereas melittin is deeply inserted into lipid membranes and affects their headgroup hydration and mobility measurably.

Headgroup structure and fatty acid chain length of the acidic phospholipids modulate the interaction of membrane mimetic vesicles with the antimicrobial peptide protegrin-1

The interaction of protegrin-1 (PG-1), a small beta-sheet antimicrobial peptide with acidic phospholipid model membranes was investigated by differential scanning calorimetry. We found that PG-1 can distinguish between liposomes of the anionic phospholipids DPPG, DPPS and DPPA, eventhough the headgroups of these phospholipids all have the same net charge and they carry the same hydrocarbon chains. Specifically, PG-1 had only a minor effect on the thermotropic phase behavior of DPPA liposomes, while it interacted preferentially with the fluid phase of DPPS. Furthermore, PG-1 could induce a phase separation in DPPG liposomes resulting in the formation of peptide-rich domains even at low concentrations of the peptide. However, this peptide-rich domain was not evident when the fatty acyl chains were longer or shorter by two carbon atoms. In addition, PG-1 can also form peptide-rich domains in DPPS vesicles but only at high concentrations of the peptide. These results suggest that in addition to an overall negative charge, the structural features of the phospholipid headgroups, lipid packing and thus membrane fluidity will influence the interaction with PG-1, thereby modulating its biological activity.