Progesterone release from glutaraldehyde cross-linked casein microspheres: in vitro studies and in vivo response in rabbits

High Bioaffinity Controllable Assembly Nanocarrier UiO-66-NH2@Quantum Dot-Based Immunochromatographic Assay for Simultaneous Detection of Five Mycotoxins in Cereals and Feed

Herein, the UiO-66-NH2@quantum dot (NU66@QD) was synthesized with excellent fluorescence intensity and biocompatibility, which was used to develop a multiple immunochromatographic assay (ICA) for the detection of aflatoxin B1 (AFB1), fumonisin B1 (FB1), deoxynivalenol (DON), T-2 toxins (T-2), and zearalenone (ZEN) in cereals and feed. Five monoclonal antibodies and NU66@QD were efficiently labeled by a one-step mixed method to form a multiple detection probe. The limits of detection of the proposed NU66@QD-ICA for AFB1/FB1/DON/T-2/ZEN were 0.04/0.28/0.25/0.09/0.08 μg/kg. The recoveries ranged from 82.83-117.44%, with the coefficient of variation from 2.88-11.80%. A parallel analysis in 35 naturally contaminated cereal and feed samples was confirmed by LC-MS/MS, and the results showed a good correlation (R2 > 0.9), indicating the practical reliability of the multiple NU66@QD-ICA. Overall, the introduction of the novel nanomaterial NU66@QD provides a highly sensitive and efficient multiplex detection strategy for the development of ICA.

Clathrin light chain-conjugated drug delivery for cancer

Targeted drug delivery systems hold the remarkable potential to improve the therapeutic index of anticancer medications markedly. Here, we report a targeted delivery platform for cancer treatment using clathrin light chain (CLC)-conjugated drugs. We conjugated CLC to paclitaxel (PTX) through a glutaric anhydride at high efficiency. Labeled CLCs localized to 4T1 tumors implanted in mice, and conjugation of PTX to CLC enhanced its delivery to these tumors. Treatment of three different mouse models of cancer-melanoma, breast cancer, and lung cancer-with CLC-PTX resulted in significant growth inhibition of both the primary tumor and metastatic lesions, as compared to treatment with free PTX. CLC-PTX treatment caused a marked increase in apoptosis of tumor cells and reduction of tumor angiogenesis. Our data suggested HSP70 as a binding partner for CLC. Our study demonstrates that CLC-based drug-conjugates constitute a novel drug delivery platform that can augment the effects of chemotherapeutics in treating a variety of cancers. Moreover, conjugation of therapeutics with CLC may be used as means by which drugs are delivered specifically to primary tumors and metastatic lesions, thereby prolonging the survival of cancer patients.

Magnetic casein aggregates as an innovative support platform for laccase immobilization and bioremoval of crystal violet

In this study, casein@CoFe₂O₄ was fabricated through a green synthesis methodology and applied to immobilize laccase. The constructed casein@CoFe₂O₄ exhibited porous structures with distinct cavities and suitable magnetic properties. The abundance of aromatic functional groups on the surface renneted casein and possible π-type interaction between laccase and para-κ-casein resulted in a successful immobilization. The biocatalyst retained 50% of its initial activity after 24 reusability cycles, indicating stable immobilization of laccase onto the casein microstructures. The stability of laccase after immobilization was improved by 300% in comparison with the free enzyme, especially in basic pH values. The constructed laccase@casein@CoFe₂O₄ was then incorporated to remove crystal violet (CV) as an environmentally harmful synthetic tri-phenylmethane dye. The prepared heterogeneous biocatalyst effectively diminished the antimicrobial activity of CV up to 81.3% in 40 min against some bacterial strains, resulting from the formation of more minor toxic metabolites identified by liquid chromatography coupled with mass spectroscopy after degradation procedure. The proposed green and feasible method for the preparation of magnetic casein aggregates has not been previously reported. The incorporation of casein, which acted as a molecular chaperon, resulted in a significant improvement in the enzymatic stability and exhibited appropriate reusability for the constructed biocatalytic system.

Conjugation of Amphiphilic Proteins to Hydrophobic Ligands in Organic Solvent

Protein-ligand conjugations are usually carried out in aqueous media in order to mimic the environment within which the conjugates will be used. In this work, we focus on the conjugation of amphiphilic variants of elastin-like polypeptide (ELP), short elastin (sEL), to poorly water-soluble compounds like OPPVs ( p-phenylenevinylene oligomers), triarylamines, and polypyridine-metal complexes. These conjugations are problematic when carried out in aqueous phase because hydrophobic ligands tend to avoid exposure to water, which in turn causes the ligand to self-aggregate and/or interact noncovalently with hydrophobic regions of the amphiphile. Ultimately, this behavior leads to low conjugation efficiency and contamination with strong noncovalent "conjugates". After exploring the solubility of sEL in various organic solvents, we have established an efficient conjugation methodology for obtaining covalent conjugates virtually free of contaminating noncovalent complexes. When conjugating carboxylated ligands to the amphiphile amines, we demonstrate that even when only one amine (the N-terminus) is present, its derivatization is 98% efficient. When conjugating amine moieties to the amphiphile carboxyls (a problematic configuration), protein multimerization is avoided, 98-100% of the protein is conjugated, and the unreacted ligand is recovered in pure form. Our syntheses occur in "one pot", and our purification procedure is a simple workup utilizing a combination of water and organic solvent extractions. This conjugation methodology might provide a solution to problems arising from solubility mismatch of protein and ligand, and it is likely to be widely applied for modification of recombinant amphiphiles used for drug delivery (PEG-antibodies, polymer-enzymes, food proteins), cell adhesion (collagen, hydrophobins), synthesis of nanostructures (peptides), and engineering of biocompatible optoelectronics (biological polymers), to cite a few.

Translatable High Drug Loading Drug Delivery Systems Based on Biocompatible Polymer Nanocarriers

Most nanocarriers possess low drug loading, resulting in frequently repeated administration and thereby high cost and increased side effects. Furthermore, the characteristics of nanocarrier materials, especially the drug loading capacity, plays a vital role in the drug delivery efficacy. In this review, we focus on the readily translatable polymeric drug delivery systems with high drug loading, which are comprised of biocompatible polymers such as poly(ethylene glycol), poly( N-vinylpyrrolidone), polyoxazoline, natural proteins like albumin and casein, non-natural proteins such as recombinant elastin-like polypeptides, as well as nucleic acids. At the end of this review, applications of these polymeric nanocarriers on the delivery of proteins and gene drugs are also briefly discussed.

Effect of treatment of Bos indicus heifers with progesterone 0, 3 and 6 days after follicular aspiration on follicular dynamics and the timing of oestrus and ovulation

Synchronisation of wave emergence is used to synchronise oestrus in cattle. The aim of this study was to determine if treatment with high concentrations of progesterone in Bos indicus heifers for 3 days would synchronise new wave emergence when treatment commenced at early, mid and late stages of follicular development. Heifers were treated with a sc silicone implant containing norgestomet from Days -7 to 9 and cloprostenol (IM) on Days -7 and -2. All follicles > 4 mm in diameter were removed by transvaginal follicular aspiration either on Days 0 (Experiment 1), 3 (Experiment 2) or 6 (Experiment 3). From Days 6 to 9 every heifer was treated with two intravaginal progesterone releasing inserts that each contained either no progesterone (Control, n = 8/experiment) or 3.12 g of progesterone (n = 8/experiment). Ovarian follicular development was monitored at least once daily following aspiration until oestrus and ovulation. In each experiment, treatment with progesterone significantly increased concentrations of progesterone in plasma from Days 6 to 9 compared to Control heifers. It also significantly delayed the day of emergence of the ovulatory follicle (1.6 ± 0.6 vs 8.6 ± 0.3; 4.1 ± 0.1 vs 8.6 ± 0.2; 7.0 ± 0.0 vs 9.3 ± 0.4, for Control vs progesterone treated heifers, respectively in Experiments 1 to 3) and the interval from implant removal to oestrus and ovulation. In conclusion, treatment with high concentrations of progesterone can synchronise wave emergence in Bos indicus heifers when administered at early, mid and late stages of follicular development.

Preparation of TPP-crosslinked chitosan microparticles by spray drying for the controlled delivery of progesterone intended for estrus synchronization in cattle

PURPOSE

Planned reproduction in cattle involves regulation of estrous cycle and the use of artificial insemination. Cycle control includes the administration of exogenous progesterone during 5-8 days in a controlled manner allowing females to synchronize their ovulation. Several progesterone delivery systems are commercially available but they have several drawbacks. The aim of the present contribution was to evaluate chitosan microparticles entrapping progesterone as an alternative system.

METHODS

Microparticles were prepared by spray drying. The effect of formulation parameters and experimental conditions on particle features and delivery was studied. A mathematical model to predict progesterone plasma concentration in animals was developed and validated with experimental data.

RESULTS

Microparticle size was not affected by formulation parameters but sphericity enhances as Tween 80 content increases and it impairs as TPP content rises. Z potential decreases as phosphate content rises. Particles remain stable in acidic solution but the addition of surfactant is required to stabilize dispersions in neutral medium. Encapsulation efficiencies was 69-75%. In vitro delivery studies showed burst and diffusion-controlled phases, being progesterone released faster at low pH. In addition, delivery extend in cows was affected mainly by particle size and hormone initial content, while the amount injected altered plasma concentration. Theoretical predictions with excellent accuracy were obtained.

CONCLUSION

The mathematical model developed can help to find proper particle features to reach specific delivery rates in the animals. This not only save time, money and effort but also minimized experimentation with animals which is desired from an ethical point of view.

Integrated Experimental and Modeling Study of Enzymatic Degradation Using Novel Autofluorescent BSA Microspheres

Autofluorescent bovine serum albumin (BSA) hydrogel microspheres were prepared through the spray-drying of glutaraldehyde cross-linked BSA nanoparticles and then used for a proteinase K based degradation study in an aqueous solution. Experimental results and empirical models are presented to characterize the kinetics of BSA hydrogel microsphere degradation, as well as the accompanying release of synthesized fluorophore. The BSA gel degradation dynamics is primarily controlled by the concentration of proteinase K within the Tris buffer. The coupling of swelling dynamics and the transient distributions of fluorophore are traced by confocal microscopy. Models are developed based on the linear theory of elastic deformation coupled to enzyme and fluorophore transport. This study represents a fundamental investigation of the degradation and release kinetics of protein-based materials, which can potentially be applied for the dynamic and photostable tracking of relevant in vivo systems.

Method Validation for Progesterone Determination in Poly(methyl methacrylate) Nanoparticles Synthesized via Miniemulsion Polymerization

Exogenous progesterone has several applications in human health and in veterinary medicine, especially in fixed-time artificial insemination protocol. Progesterone nanoencapsulation in biocompatible polymers, such as poly(methyl methacrylate) (PMMA), is an alternative to substitute silicone-based release device traditionally used for estrus control. Progesterone concentration inside the nanoparticles must be precisely known; for that reason, a validation methodology must be applied to ensure reliable results, suitable for nanoparticles application. In this work, an UV-Vis spectrophotometric method was validated for the determination of progesterone in PMMA nanoparticles synthesized by miniemulsion polymerization. Chloroform was used as solvent, showing selectivity to the encapsulated drug and the components of the polymeric matrix did not influence progesterone recovery. Detection and quantitation limits (DL and QL) obtained were 0.32 and 0.96 mg·L−1, respectively, and precision tests (between different analysts and equipment) indicated acceptable Relative Standard Deviations (RSD < 5%). Miniemulsion polymerization reactions were carried out producing two different morphologies: nanospheres (NS) and nanocapsules (NC), with average intensity diameters (Dz) of 150–200 nm and 240–300 nm, respectively. Polymerization gravimetric conversions obtained for both cases were higher than 95% and encapsulation efficiencies greater than 69% and 90% for the nanospheres and nanocapsules, respectively.

Superiority of liquid crystalline cubic nanocarriers as hormonal transdermal vehicle: comparative human skin permeation-supported evidence

OBJECTIVES

The aim of this investigation was to explore the feasibility of various nanocarriers to enhance progesterone penetration via the human abdominal skin.

METHODS

Four progesterone-loaded nanocarriers; cubosomes, nanoliposomes, nanoemulsions and nanomicelles were formulated and characterized regarding particle size, zeta potential, % drug encapsulation and in vitro release. Structural elucidation of each nanoplatform was performed using transmission electron microscopy. Ex vivo skin permeation, deposition ability and histopathological examination were evaluated using Franz diffusion cells.

RESULTS

Each nanocarrier was fabricated with a negative surface, nanometric size (≤ 270 nm), narrow size distribution and reasonable encapsulation efficiency. In vitro progesterone release showed a sustained release pattern for 24 h following a non-Fickian transport diffusion mechanism. All nanocarriers exhibited higher transdermal flux relative to free progesterone. Cubosomes revealed a higher skin penetration with transdermal steady flux of 48.57.10(-2) ± 0.7 µg/cm(2) h. Nanoliposomes offered a higher percentage of skin progesterone deposition compared to other nanocarriers. Based on the histopathological examination, cubosomes and nanoliposomes were found to be biocompatible for transdermal application. Confocal laser scanning microscopy confirmed the ability of fluoro-labeled cubosomes to penetrate through the whole skin layers.

CONCLUSION

The elaborated cubosomes proved to be a promising non-invasive nanocarrier for transdermal hormonal delivery.

In vitro evaluation of suspoemulsions for in situ-forming polymeric microspheres and controlled release of progesterone

One possibility to obtain a higher dose of drug in a lower formulation volume can be by using of saturated quantity of drug in one of the phases of an emulsion. These formulations are called suspoemulsions (S/O/W). When a hydrophobic polymer is added to the organic phase of suspoemulsions, these formulations can be used to entrap the drug inside microspheres after in situ precipitation of the polymer-drug-excipients mix. In this work, performance and stability of progesterone suspensions in triacetin as organic phase of suspoemulsions were evaluated. These formulations were compared with O/W emulsions. Mathematical models were used to study in vitro release profiles. The results confirmed that S/O/W systems could be an attractive alternative to O/W formulations for the entrapment of progesterone inside poly(d,l-lactide-co-glycolide) microspheres. Diffusive-based models fit the in vitro release of progesterone from in situ-formed microspheres. For longer release periods, a time-dependent diffusion coefficient was successfully estimated.

Long-acting injectable hormonal dosage forms for contraception

Although great efforts have been made to develop long-acting injectable hormonal contraceptives for more than four decades, few long-acting injectable contraceptives have reached the pharmaceutical market or even entered clinical trials. On the other hand, in clinical practice there is an urgent need for injectable long-acting reversible contraceptives which can provide contraceptive protection for more than 3 months after one single injection. Availability of such products will offer great flexibility to women and resolve certain continuation issues currently occurring in clinics. Herein, we reviewed the strategies exploited in the past to develop injectable hormonal contraceptive dosages including drug microcrystal suspensions, drug-loaded microsphere suspensions and in situ forming depot systems for long-term contraception and discussed the potential solutions for remaining issues met in the previous development.

Nanotechnology-based intelligent drug design for cancer metastasis treatment

Traditional chemotherapy used today at clinics is mainly inherited from the thinking and designs made four decades ago when the Cancer War was declared. The potency of those chemotherapy drugs on in-vitro cancer cells is clearly demonstrated at even nanomolar levels. However, due to their non-specific effects in the body on normal tissues, these drugs cause toxicity, deteriorate patient's life quality, weaken the host immunosurveillance system, and result in an irreversible damage to human's own recovery power. Owing to their unique physical and biological properties, nanotechnology-based chemotherapies seem to have an ability to specifically and safely reach tumor foci with enhanced efficacy and low toxicity. Herein, we comprehensively examine the current nanotechnology-based pharmaceutical platforms and strategies for intelligent design of new nanomedicines based on targeted drug delivery system (TDDS) for cancer metastasis treatment, analyze the pros and cons of nanomedicines versus traditional chemotherapy, and evaluate the importance that nanomaterials can bring in to significantly improve cancer metastasis treatment.

Ionically-crosslinked milk protein nanoparticles as flutamide carriers for effective anticancer activity in prostate cancer-bearing rats

In this study, casein (CAS) nanoparticles were used to encapsulate the hydrophobic anticancer drug, flutamide (FLT), aiming at controlling its release, enhancing its anti-tumor activity, and reducing its hepatotoxicity. The nanoparticles were prepared by emulsification of CAS, at pH below its isoelectric point, and stabilized via ionic-crosslinking with sodium tripolyphosphate (TPP). The nanoparticles were spherical and positively charged with a size below 100 nm and exhibited a sustained drug release up to 4 days. After intravenous administration into prostate cancer-bearing rats for 28 days, FLT-loaded CAS nanoparticles showed a higher anti-tumor efficacy as revealed by a significantly higher % reduction in PSA serum level (75%) compared to free FLT (55%). Moreover, the nanoparticles demonstrated a marked reduction in the relative weights of both prostate tumor and seminal vesicle (43% and 32%) compared to free FLT (12% and 18%), respectively. A significantly higher anti-proliferative, anti-angiogenic, and apoptotic effects was demonstrated by the nanoparticles compared to drug solution as evidenced by their ability to decrease the expression of the proliferative marker (Ki-67) and reduce the level of tumor angiogenic markers (VEGF and IGF-1) as well as their ability to activate caspase-3 with subsequent induction of apoptosis in prostate cancer cells. Conclusively, these novel ionically-crosslinked milk protein nanovehicles offer a promising carrier to allow controlled intravenous delivery of hydrophobic anticancer drugs.

Novel ionically crosslinked casein nanoparticles for flutamide delivery: formulation, characterization, and in vivo pharmacokinetics

A novel particulate delivery matrix based on ionically crosslinked casein (CAS) nanoparticles was developed for controlled release of the poorly soluble anticancer drug flutamide (FLT). Nanoparticles were fabricated via oil-in-water emulsification then stabilized by ionic crosslinking of the positively charged CAS molecules below their isoelectric point, with the polyanionic crosslinker sodium tripolyphosphate. With the optimal preparation conditions, the drug loading and incorporation efficiency achieved were 8.73% and 64.55%, respectively. The nanoparticles exhibited a spherical shape with a size below 100 nm and a positive zeta potential (+7.54 to +17.3 mV). FLT was molecularly dispersed inside the nanoparticle protein matrix, as revealed by thermal analysis. The biodegradability of CAS nanoparticles in trypsin solution could be easily modulated by varying the sodium tripolyphosphate crosslinking density. A sustained release of FLT from CAS nanoparticles for up to 4 days was observed, depending on the crosslinking density. After intravenous administration of FLT-CAS nanoparticles into rats, CAS nanoparticles exhibited a longer circulation time and a markedly delayed blood clearance of FLT, with the half-life of FLT extended from 0.88 hours to 14.64 hours, compared with drug cosolvent. The results offer a promising method for tailoring biodegradable, drug-loaded CAS nanoparticles as controlled, long-circulating drug delivery systems of hydrophobic anticancer drugs in aqueous vehicles.

Use of human amelogenin in molecular encapsulation for the design of pH responsive microparticles

Background

Proteins can be used in drug delivery systems to improve pharmacological properties of an active substance. Differences in pH between tissues can be utilized in order to achieve a targeted drug release at a specific location or tissue, such as a tumor. The enamel matrix protein amelogenin has a pH dependent solubility profile and self-assemble to form aggregates at neutral pH. This could make amelogenin useful in the design of pH responsive drug delivery systems.

Results

In this study amelogenin was evaluated as a pH responsive component in drug delivery applications. This was achieved by testing the ability of amelogenin to entrap/release other proteins upon changes in pH, and by testing if amelogenin could confer pH responsiveness to an existing and versatile drug delivery system, such as gelatin microparticles. Amelogenin was able to encapsulate bovine serum albumin and insulin, whichwere used as model target proteins. The composite aggregates of amelogenin and target protein were formed at neutral pH and could be reversibly solubilized at weakly acidic pH. Gelatin microparticles prepared in the presence of amelogenin, showed a modulated structure in response to pH change, when studied by scanning electron microscopy, compared to particles without amelogenin. At neutral pH amelogenin induced formation of pores in the particle surface, which were not present at acidic pH, or in particles lacking amelogenin.

Conclusions

The results from this study demonstrate that amelogenin can be a useful component in drug delivery systems in order to achieve a pH dependent response.

Inclusion mechanism of steroid drugs into beta-cyclodextrins. Insights from free energy calculations

The inclusion of hydrocortisone, progesterone, and testosterone into the cavity of beta-cyclodextrin (beta-CD) following two possible orientations was investigated using molecular dynamics simulations and free-energy calculations. The free-energy profiles that delineate the inclusion process were determined using an adaptive biasing force. The present results reveal that although the free-energy surfaces feature two local minima corresponding to a partial and a complete inclusion, the former mode is markedly preferred, irrespective of the orientation. Ranking the propensity of the three steroidal molecules to associate with beta-CD, viz. progesterone>testosterone>hydrocortisone, is shown to be in excellent agreement with experiment. This conclusion is further supported by independent calculations relying on alchemical transformations in conjunction with free energy perturbation, wherein the relative binding free energy for the three steroids was estimated. In addition, decomposition of the potentials of mean force into free-energy contributions and significant decrease in the total hydrophobic surface area suggest that by and large, van der Waals and hydrophobic interactions constitute the main driving forces responsible for the formation of the inclusion complexes. Analysis of their structural features from the molecular dynamics trajectories brings to light different hydrogen-bonding patterns that are characterized by distinct dynamics and stabilities.

Protein-based nanomedicine platforms for drug delivery

Protein-based nanomedicine platforms for drug delivery comprise naturally self-assembled protein subunits of the same protein or a combination of proteins making up a complete system. They are ideal for drug-delivery platforms due to their biocompatibility and biodegradability coupled with low toxicity. A variety of proteins have been used and characterized for drug-delivery systems, including the ferritin/apoferritin protein cage, plant-derived viral capsids, the small Heat shock protein (sHsp) cage, albumin, soy and whey protein, collagen, and gelatin. There are many different types and shapes that have been prepared to deliver drug molecules using protein-based platforms, including various protein cages, microspheres, nanoparticles, hydrogels, films, minirods, and minipellets. The protein cage is the most newly developed biomaterial for drug delivery and therapeutic applications. The uniform size, multifunctionality, and biodegradability push it to the frontier of drug delivery. In this Review, the recent strategic development of drug delivery is discussed with emphasis on polymer-based, especially protein-based, nanomedicine platforms for drug delivery. The advantages and disadvantages are also discussed for each type of protein-based drug-delivery system.

Applications and Degradation of Proteins Used as Tissue Engineering Materials

This article provides an up-to-date review on the applications of natural polymers, i.e., proteins, as materials for tissue engineering. Proteins are one of the important candidates for tissue engineering materials based on their superior biocompatibility, biodegradation, bioresorbability, and so on. However, their inferior mechanical properties limit their broad application. Currently-available proteins for application in tissue engineering or drug delivery systems, such as fibrin, collagen, zein, silk fibroin, keratin, casein and albumin, and the biodegradation of tissue-engineered substitutes based on proteins are presented. Techniques of scaffold fabrication are also mentioned. Problems and future possibilities for development of protein-based tissue-engineered substitutes are also introduced in this review.

Gelatin-methotrexate conjugate microspheres as a potential drug delivery system

Gelatin-methotrexate microspheres for intra-tumor administration have possibilities for minimizing systemic toxicities of methotrexate (MTX) and overcoming its resistance. Gelatin-MTX conjugates prepared by a carbodiimide reaction were crosslinked with glutaraldehyde to form microspheres (MTX:gelatin molar ratios of 2:1, 15:1, and 21:1). Microspheres were evaluated under in vitro tumor conditions at pH 6.5 and 37 degrees C with and without Cathepsin B (Cat B). Some microspheres were capped with an ethanolamine/cyanoborohydride procedure. SEM of broken microspheres revealed a hollow shell structure. Superficial Cat B degradation influenced some free MTX release but produced no conjugate fragment release. HPLC measured release of fragments (<10 kDa) was very little and release of free MTX was small. However, higher drug load microspheres released less free MTX than lower drug load, a substantial lag phase of free MTX release from capped microspheres changed to an initial rapid release in uncapped microspheres, and fragments were only released from uncapped microspheres. Opened unstable Schiff base crosslinks in uncapped microspheres may allow enzyme to produce conjugate fragments not observed in capped microspheres. Free MTX release may occur from dissolved uncrosslinked conjugate within the hollow microspheres. Important relationships and observations are described that will be useful for gelatin and perhaps other proteinaceous microspheres.

Biodegradation and biocompatibility of contraceptive-steroid-loaded poly (dl-lactide-co-glycolide) injectable microspheres: in vitro and in vivo study

PURPOSE

A controlled-release drug delivery of contraceptive steroids levonorgestrel (LNG) and ethinyl estradiol (EE) has been developed by successful encapsulation of LNG and EE in poly (lactide-co-glycolide) (PLG) microspheres.

MATERIALS AND METHODS

Smooth, spherical, steroid-loaded PLG microspheres with a mean size of 10-25 microm were prepared by using the water/oil/water double-emulsion solvent evaporation method.

RESULTS

In vitro release profiles showed an increased burst release of LNG/EE on Week 1; thereafter, the release was sustained. At the end of Week 7, the release of LNG/EE from 1:5 and 1:10 PLG microspheres was 75.64% and 62.55%. respectively. In vitro degradation studies showed that the PLG microspheres maintained surface integrity up to Week 8 and then eroded completely by Week 20. In an in vivo study, the serum concentration of LNG/EE in rats showed a triphasic release response, with an initial burst release of 8 ng/mL LNG and 14 pg/mL EE on Day 1; thereafter, a controlled release of the drugs to the systemic circulation was maintained until Week 15, maintaining constant drug levels of 2 ng/mL LNG and 3-4 pg/mL EE in the blood. Histological examination of steroid-loaded PLG microspheres injected intramuscularly into the thigh muscle of Wistar rats showed minimal inflammatory reaction, demonstrating that contraceptive-steroid-loaded microspheres were biocompatible.

CONCLUSION

This controlled-release and biocompatible nature of the PLG microspheres may have potential application in contraceptive therapy.

Methods to assess in vitro drug release from injectable polymeric particulate systems

This review provides a compilation of the methods used to study real-time (37 degrees C) drug release from parenteral microparticulate drug delivery systems administered via the subcutaneous or intramuscular route. Current methods fall into three broad categories, viz., sample and separate, flow-through cell, and dialysis techniques. The principle of the specific method employed along with the advantages and disadvantages are described. With the "sample and separate" technique, drug-loaded microparticles are introduced into a vessel, and release is monitored over time by analysis of supernatant or drug remaining in the microspheres. In the "flow-through cell" technique, media is continuously circulated through a column containing drug-loaded microparticles followed by analysis of the eluent. The "dialysis" method achieves a physical separation of the drug-loaded microparticles from the release media by use of a membrane, which allows for sampling without interference of the microspheres. With all these methods, the setup and sampling techniques seem to influence in vitro release; the results are discussed in detail, and criteria to aid in selection of a method are stated. Attempts to establish in vitro-in vivo correlation for these injectable dosage forms are also discussed. It would be prudent to have an in vitro test method for microparticles that satisfies compendial and regulatory requirements, is user friendly, robust, and reproducible, and can be used for quality-control purposes at real-time and elevated temperatures.