Redox reactions of heme-containing metalloproteins: dynamic effects of self-assembled monolayers on thermodynamics and kinetics of cytochrome c electron-transfer reactions

Adsorption of cytochrome c on different self-assembled monolayers: The role of surface chemistry and charge density

In this work, the adsorption behavior of cytochrome c (Cyt-c) on five different self-assembled monolayers (SAMs) (i.e., CH3-SAM, OH-SAM, NH2-SAM, COOH-SAM, and OSO3--SAM) was studied by combined parallel tempering Monte Carlo and molecular dynamics simulations. The results show that Cyt-c binds to the CH3-SAM through a hydrophobic patch (especially Ile81) and undergoes a slight reorientation, while the adsorption on the OH-SAM is relatively weak. Cyt-c cannot stably bind to the lower surface charge density (SCD, 7% protonation) NH2-SAM even under a relatively high ionic strength condition, while a higher SCD of 25% protonation promotes Cyt-c adsorption on the NH2-SAM. The preferred adsorption orientations of Cyt-c on the negatively-charged surfaces are very similar, regardless of the surface chemistry and the SCD. As the SCD increases, more counterions are attracted to the charged surfaces, forming distinct counterion layers. The secondary structure of Cyt-c is well kept when adsorbed on these SAMs except the OSO3--SAM surface. The deactivation of redox properties for Cyt-c adsorbed on the highly negatively-charged surface is due to the confinement of heme reorientation and the farther position of the central iron to the surfaces, as well as the relatively larger conformation change of Cyt-c adsorbed on the OSO3--SAM surface. This work may provide insightful guidance for the design of Cyt-c-based bioelectronic devices and controlled enzyme immobilization.

Electric field-induced functional changes in electrode-immobilized mutant species of human cytochrome c

Post-translational modifications and naturally occurring mutations of cytochrome c have been recognized as a regulatory mechanism to control its biology. In this work, we investigate the effect of such in vivo chemical modifications of human cytochrome c on its redox properties in the adsorbed state onto an electrode. In particular, tyrosines 48 and 97 have been replaced by the non-canonical amino acid p-carboxymethyl-L-phenylalanine (pCMF), thus mimicking tyrosine phosphorylation. Additionally, tyrosine 48 has been replaced by a histidine producing the natural Y48H pathogenic mutant. Thermodynamics and kinetics of the interfacial electron transfer of wild-type cytochrome c and herein produced variants, adsorbed electrostatically under different local interfacial electric fields, were determined by means of variable temperature cyclic film voltammetry. It is shown that non-native cytochrome c variants immobilized under a low interfacial electric field display redox thermodynamics and kinetics similar to those of wild-type cytochrome c. However, upon increasing the strength of the electric field, the redox thermodynamics and kinetics of the modified proteins markedly differ from those of the wild-type species. The mutations promote stabilization of the oxidized form and a significant increase in the activation enthalpy values that can be ascribed to a subtle distortion of the heme cofactor and/or difference of the amino acid rearrangements rather than to a coarse protein structural change. Overall, these results point to a combined effect of the single point mutations at positions 48 and 97 and the strength of electrostatic binding on the regulatory mechanism of mitochondrial membrane activity, when acting as a redox shuttle protein.

Molecularly imprinted electrochemical sensor for the ultrasensitive detection of cytochrome c

Cytochrome c (Cyt c) is an important biomarker for the early stage of apoptosis that plays a role in the diagnosis and therapy of several diseases including cancer. Here, an electrochemical sensor based on molecularly imprinted polymer (MIP) for the ultrasensitive detection of Cyt c is studied. It is prepared by electropolymerization of o-phenylenediamine in the presence of Cyt c as template, followed by solvent extraction, resulting in the formation of Cyt c recognition sites. The MIP is characterised by cyclic voltammetry and differential pulse voltammetry, using ferrocenecarboxylic acid as redox probe. Voltammetric data indicates that the MIP-sensor behaves as an electrode with partially blocked surface. The partition isotherm obtained fits the Langmuir model, indicating a high affinity for Cyt c, with an association constant K_a = 5 × 10 ¹¹ M^-1. DPV measurements allow to achieve extremely high analytical sensitivity and low detection limit, in the femtomolar range, with negligible unspecific adsorption. Satisfactory analytical recovery tests performed in the presence of possible interfering proteins and in diluted human serum confirmed the selectivity of the MIP-sensor as well as its potential applicability for real samples analysis.

Assessing the Functional and Structural Stability of the Met80Ala Mutant of Cytochrome c in Dimethylsulfoxide

The Met80Ala variant of yeast cytochrome c is known to possess electrocatalytic properties that are absent in the wild type form and that make it a promising candidate for biocatalysis and biosensing. The versatility of an enzyme is enhanced by the stability in mixed aqueous/organic solvents that would allow poorly water-soluble substrates to be targeted. In this work, we have evaluated the effect of dimethylsulfoxide (DMSO) on the functionality of the Met80Ala cytochrome c mutant, by investigating the thermodynamics and kinetics of electron transfer in mixed water/DMSO solutions up to 50% DMSO v/v. In parallel, we have monitored spectroscopically the retention of the main structural features in the same medium, focusing on both the overall protein structure and the heme center. We found that the organic solvent exerts only minor effects on the redox and structural properties of the mutant mostly as a result of the modification of the dielectric constant of the solvent. This would warrant proper functionality of this variant also under these potentially hostile experimental conditions, that differ from the physiological milieu of cytochrome c.

Stabilisierung von Elektronentransferwegen erlaubt Stabilität von Biohybrid-Photoelektroden über Jahre

Die Nutzung natürlicher photosynthetischer Enzyme in biohybriden Anwendungen stellt eine attraktive und potenziell nachhaltige Möglichkeit zur Umwandlung von solarer Energie in Elektrizität und Brennstoffe dar. Jedoch begrenzt die Stabilität von photosynthetisch aktiven Proteinen nach der Implementierung in biohybride Anwendungsdesigns die operative Lebensdauer von Biophotoelektroden auf bisher wenige Stunden. In dieser Publikation demonstrieren wir, wie sich die Stabilität einer mesoporösen Elektrode, welche mit dem Photoprotein RC‐LH1 aus Rhodobacter sphaeroides beschichtet ist, erheblich steigern lässt. Durch die Aufrechterhaltung der Elektronenübertragungswege konnte die operative Lebensdauer unter Dauerlicht auf 33 Tage gesteigert werden und die operative Funktionalität nach einer Lagerung über mehr zwei Jahre hinweg demonstriert werden. Kombiniert mit hohen Photoströmen, die Spitzenwerte von 4.6 mA cm−2 erreichten, erzeugte die optimierte Biophotoelektrode eine kumulative Leistung von 86 C cm−2, die höchste bisher berichtete Leistung für diese Art von Elektroden. Unsere Ergebnisse zeigen, dass der Faktor, welcher die Stabilität einschränkt, die Architektur der Struktur ist, die das Photoprotein umgibt, sowie das entsprechende biohybride Sensoren und photovoltaische Geräte mit einer Betriebsdauer von mehreren Jahren möglich sind.

Sustaining Electron Transfer Pathways Extends Biohybrid Photoelectrode Stability to Years

The exploitation of natural photosynthetic enzymes in semi-artificial devices constitutes an attractive and potentially sustainable route for the conversion of solar energy into electricity and solar fuels. However, the stability of photosynthetic proteins after incorporation in a biohybrid architecture typically limits the operational lifetime of biophotoelectrodes to a few hours. Here, we demonstrate ways to greatly enhance the stability of a mesoporous electrode coated with the RC-LH1 photoprotein from Rhodobacter sphaeroides. By preserving electron transfer pathways, we extended operation under continuous high-light to 33 days, and operation after storage to over two years. Coupled with large photocurrents that reached peak values of 4.6 mA cm-2 , the optimized biophotoelectrode produced a cumulative output of 86 C cm-2 , the largest reported performance to date. Our results demonstrate that the factor limiting stability is the architecture surrounding the photoprotein, and that biohybrid sensors and photovoltaic devices with operational lifetimes of years are feasible.

Adsorption Properties and Electron-transfer Rates of a Redox Probe at Different Interfaces of an Immunoassay Assembled on an Electro-active Photonic Platform

Physical and chemical properties of a redox protein adsorbed to different interfaces of a multilayer immunoassay assembly were studied using a single-mode, electro-active, integrated optical waveguide (SM-EA-IOW) platform. For each interface of the immunoassay assembly (indium tin oxide, 3-aminopropyl triethoxysilane, recombinant protein G, antibody, and bovine serum albumin) the surface density, the adsorption kinetics, and the electron-transfer rate of bound species of the redox-active cytochrome c (Cyt-C) protein were accurately quantified at very low surface concentrations of redox species (from 0.4 to 4% of a full monolayer) using a highly sensitive optical impedance spectroscopy (OIS) technique based on measurements obtained with the SM-EA-IOW platform. The technique is shown here to provide quantitative insights into an important immunoassay assembly for characterization and understanding of the mechanisms of electron transfer rate, the affinity strength of molecular binding, and the associated bio-selectivity. Such methodology and acquired knowledge are crucial for the development of novel and advanced immuno-biosensors.

Contributions to cytochrome c inner- and outer-sphere reorganization energy

Cytochromes c are small water-soluble proteins that catalyze electron transfer in metabolism and energy conversion processes. Hydrogenobacter thermophilus cytochrome c₅₅₂ presents a curious case in displaying fluxionality of its heme axial methionine ligand; this behavior is altered by single point mutation of the Q64 residue to N64 or V64, which fixes the ligand in a single configuration. The reorganization energy (λ) of these cytochrome c₅₅₂ variants is experimentally determined using a combination of rotating disc electrochemistry, chronoamperometry and cyclic voltammetry. The differences between the λ determined from these complementary techniques helps to deconvolute the contribution of the active site and its immediate environment to the overall λ (λ_Total). The experimentally determined λ values in conjunction with DFT calculations indicate that the differences in λ among the protein variants are mainly due to the differences in contributions from the protein environment and not just inner-sphere λ. DFT calculations indicate that the position of residue 64, responsible for the orientation of the axial methionine, determines the geometric relaxation of the redox active molecular orbital (RAMO). The orientation of the RAMO with respect to the heme is key to determining electron transfer coupling (H_AB) which results in higher ET rates in the wild-type protein relative to the Q64V mutant despite a 150 mV higher λ_Total in the former.

Efficient delocalization of the redox-active molecular orbital (RAMO) in HtWT results in an increase in H_AB value which in turn accelerates the electron transfer (ET) rate in spite of the higher reorganization energy (λ) than the HtQ64V mutant.

Development of a universal conductive platform for anchoring photo- and electroactive proteins using organometallic terpyridine molecular wires

The construction of an efficient conductive interface between electrodes and electroactive proteins is a major challenge in the biosensor and bioelectrochemistry fields to achieve the desired nanodevice performance. Concomitantly, metallo-organic terpyridine wires have been extensively studied for their great ability to mediate electron transfer over a long-range distance. In this study, we report a novel stepwise bottom-up approach for assembling bioelectrodes based on a genetically modified model electroactive protein, cytochrome c553 (cyt c553) and an organometallic terpyridine (TPY) molecular wire self-assembled monolayer (SAM). Efficient anchoring of the TPY derivative (TPY-PO(OH)2) onto the ITO surface was achieved by optimising solvent composition. Uniform surface coverage with the electroactive protein was achieved by binding the cyt c553 molecules via the C-terminal His6-tag to the modified TPY macromolecules containing Earth abundant metallic redox centres. Photoelectrochemical characterisation demonstrates the crucial importance of the metal redox centre for the determination of the desired electron transfer properties between cyt and the ITO electrode. Even without the cyt protein, the ITO-TPY nanosystem reported here generates photocurrents whose densities are 2-fold higher that those reported earlier for ITO electrodes functionalised with the photoactive proteins such as photosystem I in the presence of an external mediator, and 30-fold higher than that of the pristine ITO. The universal chemical platform for anchoring and nanostructuring of (photo)electroactive proteins reported in this study provides a major advancement for the construction of efficient (bio)molecular systems requiring a high degree of precise supramolecular organisation as well as efficient charge transfer between (photo)redox-active molecular components and various types of electrode materials.

Redox Cycling within Nanoparticle-Nucleated Protein Superstructures: Electron Transfer between Nanoparticulate Gold, Molecular Reductant, and Cytochrome c

We previously described how thousands of the heme protein cytochrome c (cyt.c) self-organize into multilayered, roughly spherical superstructures as initiated by nucleation around one colloidal gold or silver nanoparticle. Within these superstructures, the protein is stabilized to unfolding in buffered media and survives superstructure encapsulation within silica gels and processing to form bioaerogels. We now report that Au∼cyt.c superstructures in buffered media are not simply static groupings of proteins, but that the Au core and protein corona exhibit dynamic electron-transfer reactions within the superstructure as verified by UV-visible and resonance Raman spectroscopy. Within the superstructure, hundreds to thousands of ferricytochrome c (Fe^III-cyt.c) are reduced to ferrocytochrome c (Fe^II-cyt.c) following first-order kinetics with an average apparent forward rate constant of 1.9 ±0.4 × 10^-5 s^-1. The reducing power in the microheterogeneous medium is derived from two multielectron reductants: tannic acid used to stabilize the commercial gold sol and the Au nanoparticle at the center of the protein superstructure. Fluorescence monitoring of guanidinium chloride-induced unfolding reveals that superstructure-associated cyt.c is stabilized to unfolding before and after chemical reduction of Fe^III-cyt.c to form Fe^II-cyt.c, indicating that the superstructures remain intact during microheterogeneous redox reactions. Smaller nucleating Au nanoparticles or lower ionic strength in the buffered medium yields a greater extent of cyt.c reduction. Partial oxidation of the cyt.c-associated nanoparticulate Au is verified by X-ray photoelectron spectroscopy. The Au nanoparticle at the heart of the superstructure functions as a direct electron donor to the heme with oxidized Au atoms being recycled back to Au(0) as long as residual tannic acid, derived from the Au sol mother liquor, is present in the aqueous microheterogeneous medium.

Fatty Acid Binding Protein 5 Mediates Cell Death by Psychosine Exposure through Mitochondrial Macropores Formation in Oligodendrocytes

Oligodendrocytes, the myelinating cells in the central nervous system (CNS), are critical for producing myelin throughout the CNS. The loss of oligodendrocytes is associated with multiple neurodegenerative disorders mediated by psychosine. However, the involvement of psychosine in the critical biochemical pathogenetic mechanism of the loss of oligodendrocytes and myelin in krabbe disease (KD) remains unclear. Here, we addressed how oligodendrocytes are induced by psychosine treatment in both KG-1C human oligodendroglial cells and mouse oligodendrocyte precursor cells. We found that fatty acid binding protein 5 (FABP5) expressed in oligodendrocytes accelerates mitochondria-induced glial death by inducing mitochondrial macropore formation through voltage-dependent anion channels (VDAC-1) and BAX. These two proteins mediate mitochondrial outer membrane permeabilization, thereby leading to the release of mitochondrial DNA and cytochrome C into the cytosol, and the activation of apoptotic caspases. Furthermore, we confirmed that the inhibition of FABP5 functions by shRNA and FABP5-specific ligands blocking mitochondrial macropore formation, thereby rescuing psychosine-induced oligodendrocyte death. Taken together, we identified FABP5 as a critical factor in mitochondrial injury associated with psychosine-induced apoptosis in oligodendrocytes.

A pH-activated charge convertible quantum dot as a novel nanocarrier for targeted protein delivery and real-time cancer cell imaging

The rapid developments of nanocarriers based on quantum dots (QDs) have been confirmed to show substantial promise for drug delivery and bioimaging. However, optimal QDs-based nanocarriers still need to have their controlled behavior in vitro and in vivo and decrease heavy metal-associated cytotoxicity. Herein, a pH-activated charge convertible QD-based nanocarrier was fabricated by capping multifunctional polypeptide ligands (mPEG-block-poly(ethylenediamine-dihydrolipoic acid-2,3-dimethylmaleic anhydride)-L-glutamate, PEG-P(ED-DLA-DMA)LG) onto the surface of core/multishell CdSe@ZnS/ZnS QD by means of a ligand exchange strategy, followed by uploading of cytochrome C (CC) (CC-loaded QD-PEG-P(ED-DLA-DMA)LG) via electrostatic interactions, in which QDs that were water-soluble and protein-loading were perfectly integrated. That is, the CC-loaded QD-PEG-P(ED-DLA-DMA)LG inherited excellent fluorescence properties from CdSe@ZnS/ZnS QD for real-time imaging, as well as tumor-microenvironment sensitivities from PEG-P(ED-DLA-DMA)LG for enhanced cellular uptake and CC release. Experimental results verified that the QD-PEG-P(ED-DLA-DMA)LG showed enhanced internalization, rapid endo/lysosomal escape, and supplied legible real-time imaging for lung carcinoma cells. Furthermore, pH-triggered charge-convertible ability enabled the QD-PEG-P(ED-DLA-DMA)LG-CC to effectively kill cancer cells better than did the control groups. Hence, constructing smart nanocomposites by facile ligand-exchange strategy is beneficial to QD-based nanocarrier for tumor-targeting cancer therapy.

Electroactive Interface for Enabling Spectroelectrochemical Investigations in Evanescent-Wave Cavity-Ring-Down Spectroscopy

In this study, we report the development of an electrically active solid-liquid interface for the evanescent-wave cavity-ring-down spectroscopic (EW-CRDS) technique to enable spectroelectrochemical investigations of redox events. Because of a high-quality transparent conductive electrode film of indium tin oxide (ITO) coated on the interface of total internal reflection of the EW-CRDS platform, a cavity ring-down time of about 900 ns was obtained allowing spectroelectrochemical studies at solid-liquid interfaces. As a proof-of-concept on the capabilities of the developed platform, measurements were performed to address the effects of an applied electric potential to the adsorption behavior of the redox protein cytochrome c (Cyt-C) onto different interfaces, namely, bare-ITO, 3-aminopropyl triethoxysilane (APTES), and Cyt-C antibody. For each interface, the adsorption and desorption constants, the surface equilibrium constant, the Gibbs free energy of adsorption, and the surface coverage were optically measured by our electrically active EW-CRDS tool. Optical measurements at a set of constant discrete values of the applied electric potential were acquired for kinetic adsorption analysis. Cyclic voltammetry (CV) scans under synchronous optical readout were performed to study the effects of each molecular interface on the redox process of surface-adsorbed protein species. Overall, the experimental results demonstrate the ability of the electro-active EW-CRDS platform to unambiguously measure electrode-driven redox events of surface-confined molecular species at low submonolayer coverages and at a single diffraction-limited spot. Such capability is expected to open several opportunities for the EW-CRDS technique to investigate a variety of electrochemical phenomena at solid-liquid interfaces.

Total Internal Reflection Tip-Enhanced Raman Spectroscopy of Cytochrome c

Surface and tip-enhanced Raman spectroscopies in total internal reflection (TIR-SERS and TIR-TERS) are used to characterize the oxidation, spin, and ligation state of cytochrome c (Cc) molecules electrostatically bound on a hydrophilic thiol self-assembled monolayer. TIR-SERS spectra of this model hemoprotein show marker bands typical of the 6cLS ferric state of Cc. The performances of the TIR-TERS technique as a function of the incidence angle are described, showing in particular a significant electromagnetic enhancement of the Raman signal under p-polarized light excitation. TIR-TERS spectra of Cc confirm the 6cLS ferric state assignment deduced from TIR-SERS spectra, thus demonstrating the possibility of probing with nanoscale spatial resolution the 6cLS oxidized form of Cc that is potentially implicated in cell apoptotic processes. The minimal far-field contribution of the sample in TIR-TERS also offers promising perspectives for future nanoscale chemical characterizations of photosensitive biomolecules in complex biological media.

Influence of Structured Water Layers on Protein Adsorption Process: A Case Study of Cytochrome c and Carbon Nanotube Interactions and Its Implications

Cytochrome c, an essential protein of the electron transport chain, is known to be capable of amplifying the toxicity of carbon nanomaterials via free-radical generation. To understand their interaction, as well as the more general protein-nanoparticle interaction at molecular levels, we investigate the adsorptions between cytochrome c and carbon nanotubes (CNTs) in dynamic and thermodynamic ways using molecular dynamics simulations. The results reveal a well-defined three-phase process separated by two transition points: the diffusion phase where the protein diffuses in the water box, the lockdown phase I where the protein inserts into the surface-bound water layers and rearranges its conformation to fit to the surface of the CNT, and the lockdown phase II where cytochrome c repels the water molecules standing in its way to the surface of CNT and reaches stable adsorption states. The structured water layers affect the movement of atoms by electrostatic forces. In lockdown phase I, the conformation adjustment of the protein dominates the adsorption process. The most thermally favorable adsorption conformation is determined. It shows that except for the deformation of short β sheets and some portions of α helixes, most of the secondary structures of cytochrome c remain unchanged, implying that most of the functions of cytochrome c are preserved. During these processes, the energy contributions of the hydrophilic residues of cytochrome c are much larger than those of hydrophobic residues. Interestingly, the structured water layers at the CNT surface allow more hydrophilic residues such as Lys to get into close contact with the CNT, which plays a significant role during the anchoring process of adsorption. Our results demonstrate that the heme group is in close contact with the CNT in some of the adsorbed states, which hence provides a way for electron transfer from cytochrome c to the CNT surface.

Quantum biological tunnel junction for electron transfer imaging in live cells

Quantum biological electron transfer (ET) essentially involves in virtually all important biological processes such as photosynthesis, cellular respiration, DNA repair, cellular homeostasis, and cell death. However, there is no real-time imaging method to capture biological electron tunnelling in live cells to date. Here, we report a quantum biological electron tunnelling (QBET) junction and its application in real-time optical detection of QBET and the dynamics of ET in mitochondrial cytochrome c during cell life and death process. QBET junctions permit to see the behaviours of electron tunnelling through barrier molecules with different barrier widths. Using QBET spectroscopy, we optically capture real-time ET in cytochrome c redox dynamics during cellular apoptosis and necrosis in living cells. The non-invasive real-time QBET spectroscopic imaging of ET in live cell open a new era in life sciences and medicine by providing a way to capture spatiotemporal ET dynamics and to reveal the quantum biological mechanisms.

Although quantum biological electron transfer is important in many biological processes, imaging of the events in live cells has remained challenging. Here, the authors demonstrate real-time optical detection of quantum biological electron tunnelling between nanoparticles and cytochrome c inside living cells.

Release of Cytochrome C from Bax Pores at the Mitochondrial Membrane

How cytochrome C is released from the mitochondria to the cytosol via Bax oligomeric pores, a process which is required for apoptosis, is still a mystery. Based on experimentally measured residue-residue distances, we recently solved the first atomic model for Bax oligomeric pores at the membranes using computational approaches. Here, we investigate the mechanism at the microsecond time- and nanometer space- scale using MD simulations. Our free energy landscape depicts a low barrier for the permeation of cytochrome C into the Bax C-terminal mouth, with the pathway proceeding to the inner cavity and exiting via the N-terminal mouth. Release is guided by organized charged/hydrophilic surfaces. The hydrophilicity and negative charge of the pore surface gradually increase along the release pathway from the pore entry to the exit opening. Rather than inert passing of the cytochrome C through a rigid pore, the flexible pore may selectively aid the cytochrome C passage. Once the Bax pore is formed in the membrane, with a low energy barrier, the release of cytochrome C may be readily achieved through energy fluctuations. Collectively, our work provides mechanistic insight in atomic detail into the release of cytochrome C through Bax oligomeric pores.

Theory and Electrochemistry of Cytochrome c

Extensive simulations of cytochrome c in solution are performed to address the apparent contradiction between large reorganization energies of protein electron transfer typically reported by atomistic simulations and much smaller values produced by protein electrochemistry. The two sets of data are reconciled by deriving the activation barrier for electrochemical reaction in terms of an effective reorganization energy composed of half the Stokes shift (characterizing the medium polarization in response to electron transfer) and the variance reorganization energy (characterizing the breadth of electrostatic fluctuations). This effective reorganization energy is much smaller than each of the two components contributing to it and is fully consistent with electrochemical measurements. Calculations in the range of temperatures between 280 and 360 K combine long, classical molecular dynamics simulations with quantum calculations of the protein active site. The results agree with the Arrhenius plots for the reaction rates and with cyclic voltammetry of cytochrome c immobilized on self-assembled monolayers. Small effective reorganization energy, and the resulting small activation barrier, is a general phenomenology of protein electron transfer allowing fast electron transport within biological energy chains.

Supramolecular electrode assemblies for bioelectrochemistry

For more than three decades, the field of bioelectrochemistry has provided novel insights into the catalytic mechanisms of enzymes, the principles that govern biological electron transfer, and has elucidated the basic principles for bioelectrocatalytic systems. Progress in biochemistry, bionanotechnology, and our ever increasing ability to control the chemistry and structure of electrode surfaces has enabled the study of ever more complex systems with bioelectrochemistry. This feature article highlights developments over the last decade, where supramolecular approaches have been employed to develop electrode assemblies that increase enzyme loading on the electrode or create more biocompatible environments for membrane enzymes. Two approaches are particularly highlighted: the use of layer-by-layer assembly, and the modification of electrodes with planar lipid membranes.

Insights into Interprotein Electron Transfer of Human Cytochrome c Variants Arranged in Multilayer Architectures by Means of an Artificial Silica Nanoparticle Matrix

The redox behavior of proteins plays a crucial part in the design of bioelectronic systems. We have demonstrated several functional systems exploiting the electron exchange properties of the redox protein cytochrome c (cyt c) in combination with enzymes and photoactive proteins. The operation is based on an effective reaction at modified electrodes but also to a large extent on the capability of self-exchange between cyt c molecules in a surface-fixed state. In this context, different variants of human cyt c have been examined here with respect to an altered heterogeneous electron transfer (ET) rate in a monolayer on electrodes as well as an enhanced self-exchange rate while being incorporated in multilayer architectures. For this purpose, mutants of the wild-type (WT) protein have been prepared to change the chemical nature of the surface contact area near the heme edge. The structural integrity of the variants has been verified by NMR and UV-vis measurements. It is shown that the single-point mutations can significantly influence the heterogeneous ET rate at thiol-modified gold electrodes and that electroactive protein/silica nanoparticle multilayers can be constructed with all forms of human cyt c prepared. The kinetic behavior of electron exchange for the mutant proteins in comparison with that of the WT has been found altered in some multilayer arrangements. Higher self-exchange rates have been found for K79A. The results demonstrate that the position of the introduced change in the charge situation of cyt c has a profound influence on the exchange behavior. In addition, the behavior of the cyt c variants in assembled multilayers is found to be rather similar to the situation of cyt c self-exchange in solution verified by NMR.

Electrochemiluminescence aptasensor of TiO2/CdS:Mn hybrids for ultrasensitive detection of cytochrome c

A novel electrochemiluminescence (ECL) aptasensor was proposed for ultrasensitive detection of cytochrome c (cyt c) using CdS:Mn quantum dot-modified TiO2 nanowires (NWs) as electrode. The Mn-doped CdS was deposited on the TiO2 NWs by successive ion layer adsorption and reaction (SILAR) as ECL emitter, on which thiol-modified aptamer of cyt c was attached via Cd-S bond. Due to the high photo-electrical transfer efficiency, the as-prepared aptasensor shows high selectivity and sensitivity towards cyt c with a detection limit of 9.5fM and a linear range from 50fM to 125pM.

Molecular simulations of cytochrome c adsorption on positively charged surfaces: the influence of anion type and concentration

The influence of anion type and concentration on the adsorption of cytochrome c onto the positively charged NH₂-SAM surface.

The Photosystem II D1-K238E mutation enhances electrical current production using cyanobacterial thylakoid membranes in a bio-photoelectrochemical cell

The conversion of solar energy (SEC) to storable chemical energy by photosynthesis has been performed by photosynthetic organisms, including oxygenic cyanobacteria for over 3 billion years. We have previously shown that crude thylakoid membranes from the cyanobacterium Synechocytis sp. PCC 6803 can reduce the electron transfer (ET) protein cytochrome c even in the presence of the PSII inhibitor DCMU. Mutation of lysine 238 of the Photosystem II D1 protein to glutamic acid increased the cytochrome reduction rates, indicating the possible position of this unknown ET pathway. In this contribution, we show that D1-K238E is rather unique, as other mutations to K238, or to other residues in the same vicinity, are not as successful in cytochrome c reduction. This observation indicates the sensitivity of ET reactions to minor changes. As the next step in obtaining useful SEC from biological material, we describe the use of crude Synechocystis membranes in a bio-photovoltaic cell containing an N-acetyl cysteine-modified gold electrode. We show the production of significant current for prolonged time durations, in the presence of DCMU. Surprisingly, the presence of cytochrome c was not found to be necessary for ET to the bio-voltaic cell.

Real-time dynamic adsorption processes of cytochrome c on an electrode observed through electrochemical high-speed atomic force microscopy

An understanding of dynamic processes of proteins on the electrode surface could enhance the efficiency of bioelectronics development and therefore it is crucial to gain information regarding both physical adsorption of proteins onto the electrode and its electrochemical property in real-time. We combined high-speed atomic force microscopy (HS-AFM) with electrochemical device for simultaneous observation of the surface topography and electron transfer of redox proteins on an electrode. Direct electron transfer of cytochrome c (cyt c) adsorbed on a self-assembled monolayers (SAMs) formed electrode is very attractive subject in bioelectrochemistry. This paper reports a real-time visualization of cyt c adsorption processes on an 11-mercaptoundecanoic acid-modified Au electrode together with simultaneous electrochemical measurements. Adsorbing cyt c molecules were observed on a subsecond time resolution simultaneously with increasing redox currents from cyt c using EC-HS-AFM. The root mean square roughness (R_RMS) from the AFM images and the number of the electrochemically active cyt c molecules adsorbed onto the electrode (Γ) simultaneously increased in positive cooperativity. Cyt c molecules were fully adsorbed on the electrode in the AFM images when the peak currents were steady. This use of electrochemical HS-AFM significantly facilitates understanding of dynamic behavior of biomolecules on the electrode interface and contributes to the further development of bioelectronics.

Catalytic oxygen activation versus autoxidation for industrial applications: a physicochemical approach

The activation and use of oxygen for the oxidation and functionalization of organic substrates are among the most important reactions in a chemist's toolbox. Nevertheless, despite the vast literature on catalytic oxidation, the phenomenon of autoxidation, an ever-present background reaction that occurs in virtually every oxidation process, is often neglected. In contrast, autoxidation can affect the selectivity to a desired product, to those dictated by pure free-radical chain pathways, thus affecting the activity of any catalyst used to carry out a reaction. This critical review compares catalytic oxidation routes by transition metals versus autoxidation, particularly focusing on the industrial context, where highly selective and "green" processes are needed. Furthermore, the application of useful tests to discriminate between different oxygen activation routes, especially in the area of hydrocarbon oxidation, with the aim of an enhanced catalyst design, is described and discussed. In fact, one of the major targets of selective oxidation is the use of molecular oxygen as the ultimate oxidant, combined with the development of catalysts capable of performing the catalytic cycle in a real energy and cost effective manner on a large scale. To achieve this goal, insights from metallo-proteins that could find application in some areas of industrial catalysis are presented, as well as considering the physicochemical principles that are fundamental to oxidation and autoxidation processes.

Redox heme-proteins mediated fluorescence of CdSe/ZnS quantum dots

The redox properties of cytochrome c (Cyt c), hemoglobin (Hb) and myoglobin (Mb) were studied based on electrostatic interactions between Thioglycolic acid (TGA) capped CdSe/ZnS quantum dots (QDs) and proteins. Results indicated that only Cyt c quenched the fluorescence of the QDs at pH>8.0. Under the optimized conditions, a significant fluorescence recovery of the QDs' system was observed when the reduced form of Cyt c incubated with TGA capped QDs, however, the reduced state of Hb and Mb resulted in a more fluorescence quenching on the same size of QDs. Interestingly, the fluorescence changes of QDs-proteins could be switched by modulating the redox potentials of proteins-attached QDs. Moreover, only the oxidized Cyt c form was reduced by the generated O2(-) that significantly enhanced the fluorescence of the QDs' system, which was also demonstrated by fluorescence imaging in HeLa cells.

Influence of the Phase State of Self-Assembling Redox Mediators on their Electrochemical Activity

Self-assembling redox mediators have the potential to be broadly useful in a range of interfacial electrochemical contexts because the oxidation state and state of assembly of the mediator are closely coupled. In this paper, we report an investigation of the self-assembly of single- and double-tailed ferrocenyl amphiphiles (FTMA and BFDMA, respectively) at the surfaces of Pt electrodes and the impact of the dynamic assembled state of the amphiphiles on their rate of oxidation. We conclude that frozen aggregates of BFDMA adsorb to the surfaces of the Pt electrodes, and that slow dynamics of reorganization BFDMA within these aggregates limits the rate of electrooxidation of BFDMA. In contrast, FTMA, while forming assemblies on the surfaces of Pt electrodes, is characterized by fast reorganization dynamics and a corresponding rate of oxidation that is an order of magnitude greater than BFDMA.

Temperature-Driven Changeover in the Electron-Transfer Mechanism of a Thermophilic Plastocyanin

Electron-transfer kinetics of the thermophilic protein Plastocyanin from Phormidium laminosum adsorbed on 1,ω-alkanedithiol self-assembled monolayers (SAMs) deposited on gold have been investigated. The standard electron-transfer rate constant has been determined as a function of electrode-protein distance and solution viscosity over a broad temperature range (0-90 °C). For either thin or thick SAMs, the electron-transfer regime remains invariant with temperature, whereas for the 1,11-undecanethiol SAM of intermediate chain length, a kinetic regime changeover from a gated or friction-controlled mechanism at low temperature (0-30 °C) to a nonadiabatic mechanism above 40 °C is observed. To the best of our knowledge, this is the first time a thermal-induced transition between these two kinetic regimes is reported for a metalloprotein.

Axial iron coordination and spin state change in a heme c upon electrostatic protein-SAM interaction

A bacterial di-heme cytochrome c binds electrostatically to a gold electrode surface coated with a negatively charged COOH-terminated SAM adopting a sort of 'perpendicular' orientation. Cyclic voltammetry, Resonance Raman and SERRS spectroscopies indicate that the high-potential C-terminal heme center proximal to the SAM's surface undergoes an adsorption-induced swapping of one axial His ligand with a water molecule, which is probably lost in the reduced form, and a low- to high-spin transition. This coordination change for a bis-His ligated heme center upon an electrostatically-driven molecular recognition is as yet unprecedented, as well as the resulting increase in reduction potential. We discuss it in comparison with the known methionine ligand lability in monoheme cytochromes c occurring upon interaction with charged molecular patches. One possible implication of this finding in biological ET is that mobile redox partners do not behave as rigid and invariant bodies, but in the ET complex are subjected to molecular changes and structural fluctuations that affect in a complex way the thermodynamics and the kinetics of the process.