Understanding the dioxygen reaction chemistry of diiron proteins through synthetic modeling studies

Activation of Molecular Oxygen and Selective Oxidation with Metal Complexes

ConspectusSelective oxidation with molecular oxygen is one of the most appealing approaches to functionalization of organic molecules and, yet at the same time, one of the most challenging reactions facing organic synthesis due to poor selectivity control. Molecular oxygen is a green and inexpensive oxidant, producing water as the only byproduct in oxidation. Not surprisingly, it has been used in the manufacturing of many commodity chemicals in the industry. It is also nature's choice of oxidant and drives a variety of oxidation reactions critical to life and various other biologic processes. While the past decades have witnessed great progress in understanding, both structurally and mechanistically, how nature exploits metalloenzymes, i.e., monooxygenases and dioxygenases, to tackle some of the most challenging oxidation reactions, e.g., methane oxidation to methanol, there are only a small number of well-defined, man-made metal complexes that have been reported to enable selective oxidation with molecular oxygen of compounds more relevant to fine chemical and pharmaceutical synthesis.In the past 10 years or so, our laboratories have developed several transition metal complexes and shown that they are capable of catalyzing selective oxidation under 1 atm of O2. Thus, we have shown that an Fe(II)-bisimidazolidinyl-pyridine complex catalyzes selective oxygenation of C-H bonds in ethers with concomitant release of hydrogen gas instead of water, and when the iron center is replaced with Fe(III), selective oxidative cleavage of C═C bonds of olefins becomes feasible. To address the low activity of the iron complex in oxidizing less active olefins, we have developed a Mn(II)-bipyridine complex, which catalyzes oxidative cleavage of C═C bonds in aliphatic olefins, C-C bonds in diols, and carboxyl units in carboxylic acids under visible light irradiation. Light is necessary in the oxidation to cleave an off-cycle, inactive manganese dimer into a catalytically active Mn═O oxo species. Furthermore, we have found that a binuclear salicylate-bridged Cu(II) complex enables the C-H oxidation of tetrahydroisoquinolines as well as C═C bond cleavage, and when a catalytic vitamin B1 analogue is brought in, oxygenation of tetrahydroisoquinolines to lactams takes place via carbene catalysis. Still further, we have found that a readily accessible binuclear Rh(II)-terpyridine complex catalyzes the oxidation of alcohols, and being water-soluble, the catalyst can be easily separated and reused multiple times. In addition, we recently unearthed a simple protocol that allows waste polystyrene to be depolymerized to isolable, valuable chemicals. A cheap Brønsted acid acts as the catalyst, activating molecular oxygen to a singlet state through complexation with the polymer under light irradiation, thereby depolymerizing the polymer.

A Single Terminal [NiII-OH] Catalyst for Direct Julia-Type Olefination and α-Alkylation Involving Sulfones and Alcohols

A terminal [NiII-OH] complex 1, supported by triflamide-functionalized NHC ligands, showed divergent reactivity for the reaction of sulfone with alcohol, contingent on base concentration, temperature, and time. Julia-type olefination of alcohols with sulfones was achieved using one equiv. of base, whereas lowering base loading to 0.5 equiv. afforded α-alkylated sulfones. Besides excellent substrate scope and selectivity, biologically active stilbene derivatives DMU-212, pinosylvin, resveratrol, and piceatannol were synthesized in high yield under Julia-type olefination conditions. An extensive array of controlled experiments and DFT calculations provide valuable insight on the reaction pathway.

A Reactive, Photogenerated High-Spin (S = 2) FeIV(O) Complex via O2 Activation

Addition of dioxygen at low temperature to the non-heme ferrous complex Fe^II(Me₃TACN)((OSi^Ph2)₂O) (1) in 2-MeTHF produces a peroxo-bridged diferric complex Fe₂^III(μ-O₂)(Me₃TACN)₂((OSi^Ph2)₂O)₂ (2), which was characterized by UV-vis, resonance Raman, and variable field Mössbauer spectroscopies. Illumination of a frozen solution of 2 in THF with white light leads to homolytic O-O bond cleavage and generation of a Fe^IV(O) complex 4 (ν(Fe=O) = 818 cm^-1; δ = 0.22 mm s^-1, ΔE_Q = 0.23 mm s^-1). Variable field Mössbauer spectroscopy measurements show that 4 is a rare example of a high-spin S = 2 Fe^IV(O) complex and the first synthetic example to be generated directly from O₂. Complex 4 is highly reactive, as expected for a high-spin ferryl, and decays rapidly in fluid solution at cryogenic temperatures. This decay process in 2-MeTHF involves C-H cleavage of the solvent. However, the controlled photolysis of 2 in situ with visible light and excess phenol substrate leads to competitive phenol oxidation, via the proposed transient generation of 4 as the active oxidant.

Mechanistic Insights into the Oxygen Atom Transfer Reactions by Nonheme Manganese Complex: A Computational Case Study on the Comparative Oxidative Ability of Manganese-Hydroperoxo vs High-Valent MnIV═O and MnIV-OH Intermediates

Understanding the comparative oxidative abilities of high-valent metal-oxo/hydroxo/hydroperoxo species holds the key to robust biomimic catalysts that perform desired organic transformations with very high selectivity and efficiency. The comparative oxidative abilities of popular high-valent iron-oxo and manganese-oxo species are often counterintuitive, for example, oxygen atom transfer (OAT) reaction by [(Me₂EBC)Mn^IV-OOH]³⁺, [(Me₂EBC)Mn^IV-OH]³⁺, and [(Me₂EBC)Mn^IV═O]²⁺ (Me₂EBC = 4,11-dimethyl-1,4,8,11-tetraazabicyclo[6.6.2]hexadecane) shows extremely high reactivity for Mn^IV-OOH species and no reactivity for Mn^IV-OH and Mn^IV═O species toward alkyl/aromatic sulfides. Using a combination of density functional theory (DFT) and ab initio domain-based local pair natural orbital coupled-cluster with single, double, and perturbative triples excitation (DLPNO-CCSD(T)) and complete-active space self-consistent field/N-electron valence perturbation theory second order (CASSCF/NEVPT2) calculations, here, we have explored the electronic structures and sulfoxidation mechanism of these species. Our calculations unveil that Mn^IV-OOH reacts through distal oxygen atom with the substrate via electron transfer (ET) mechanism with a very small kinetic barrier (16.5 kJ/mol), placing this species at the top among the best-known catalysts for such transformations. The Mn^IV-OH and Mn^IV═O species have a much larger barrier. The mechanism has also been found to switch from ET in the former to concerted in the latter, rendering both unreactive under the tested experimental conditions. Intrinsic differences in the electronic structures, such as the presence and absence of the multiconfigurational character coupled with the steric effects, are responsible for such variations observed. This comparative oxidative ability that runs contrary to the popular iron-oxo/hydroperoxo reactivity will have larger mechanistic implications in understanding the reactivity of biomimic catalysts and the underlying mechanisms in PSII.

New mechanistic insights into intramolecular aromatic ligand hydroxylation and benzyl alcohol oxidation initiated by the well-defined (μ-peroxo)diiron(iii) complex

A (μ-peroxo)diiron(iii) complex [Fe₂(L^Ph₄)(O₂)(Ph₃CCO₂)]²⁺ (1-O₂) with a dinucleating ligand (L^Ph₄), generated from the reaction of a carboxylate bridged diiron(ii) complex [Fe₂(L^Ph₄)(Ph₃CCO₂)]²⁺ (1) with dioxygen in CH₂Cl₂, provides a diiron(iv)-oxo species as an active oxidant which is involved in either aromatic ligand hydroxylation or benzyl alcohol oxidation.

Terminal NiII-OH/-OH2 complexes in trigonal bipyramidal geometries derived from H2O

The preparation and characterization of two NiII complexes are described, a terminal NiII-OH complex with the tripodal ligand tris[(N)-tertbutylureaylato)-N-ethyl)]aminato ([H3buea]3-) and a terminal Ni II-OH2 complex with the tripodal ligand N,N',N″-[2,2',2″-nitrilotris(ethane-2,1-diyl)]tris(2,4,6-trimethylbenzenesulfonamido) ([MST]3-). For both complexes, the source of the -OH and -OH2 ligand is water. The salts K2[NiIIH3buea(OH)] and NMe4[NiIIMST(OH2)] were characterized using perpendicular-mode X-band electronic paramagnetic resonance, Fourier transform infrared, UV-visible spectroscopies, and its electrochemical properties were evaluated using cyclic voltammetry. The solid state structures of these complexes determined by X-ray diffraction methods reveal that they adopt a distorted trigonal bipyramidal geometry, an unusual structure for 5-coordinate NiII complexes. Moreover, the NiII-OH and NiII-OH2 units form intramolecular hydrogen bonding networks with the [H3buea]3- and [MST]3- ligands. The oxidation chemistry of these complexes was explored by treating the high-spin NiII compounds with one-electron oxidants. Species were formed with S = 1/2 spin ground states that are consistent with formation of monomeric NiIII species. While the formation of NiIII-OH complexes cannot be ruled out, the lack of observable O-H vibrations from the putative Ni-OH units suggest the possibility that other high valent Ni species are formed.

Alkane Oxidation: Methane Monooxygenases, Related Enzymes, and Their Biomimetics

Methane monooxygenases (MMOs) mediate the facile conversion of methane into methanol in methanotrophic bacteria with high efficiency under ambient conditions. Because the selective oxidation of methane is extremely challenging, there is considerable interest in understanding how these enzymes carry out this difficult chemistry. The impetus of these efforts is to learn from the microbes to develop a biomimetic catalyst to accomplish the same chemical transformation. Here, we review the progress made over the past two to three decades toward delineating the structures and functions of the catalytic sites in two MMOs: soluble methane monooxygenase (sMMO) and particulate methane monooxygenase (pMMO). sMMO is a water-soluble three-component protein complex consisting of a hydroxylase with a nonheme diiron catalytic site; pMMO is a membrane-bound metalloenzyme with a unique tricopper cluster as the site of hydroxylation. The metal cluster in each of these MMOs harnesses O₂ to functionalize the C-H bond using different chemistry. We highlight some of the common basic principles that they share. Finally, the development of functional models of the catalytic sites of MMOs is described. These efforts have culminated in the first successful biomimetic catalyst capable of efficient methane oxidation without overoxidation at room temperature.

Hydroxo-bridged diiron(iii) and dimanganese(iii) bisporphyrins: modulation of metal spins by counter anions

A brief account has been presented on how the inter-heme interactions in μ-hydroxo diiron(iii) bisporphyrins and counter anions can induce significant change in the structure and properties including the iron spin state without affecting the overall topology.

Functional models of nonheme diiron enzymes: kinetic and computational evidence for the formation of oxoiron(iv) species from peroxo-diiron(iii) complexes, and their reactivity towards phenols and H2O2

The reactivity of the previously reported peroxo adducts [Fe2(μ-O2)(L(1))4(CH3CN)2](2+), and [Fe2(μ-O2)(L(2))4(CH3CN)2](2+), (L(1) = 2-(2'-pyridyl)benzimidazole and L(2) = 2-(2'-pyridyl)-N-methylbenzimidazole) towards H2O2 as catalase mimics, and towards various phenols as functional RNR-R2 mimics, is described. Kinetic, mechanistic and computational studies gave direct evidence for the involvement of the (μ-1,2-peroxo)diiron(iii) intermediate in the O-H activation process via formation of low-spin oxoiron(iv) species.

Redox and acid-base properties of asymmetric non-heme (hydr)oxo-bridged diiron complexes

The diiron unit is commonly found as the active site in enzymes that catalyze important biological transformations. Two μ-(hydr)oxo-diiron(iii) complexes with the ligands 2,2'-(2-methyl-2-(pyridine-2-yl)propane-1,3-diyl)bis(azanediyl)bis(methylene)diphenol (H2L) and 2,2'-(2-methyl-2(pyridine-2-yl)propane-1,3-diyl)bis(azanediyl)bis(methylene)bis(4-nitrophenol) (H2L(NO2)), namely [(FeL)2(μ-O)] () and [(FeL(NO2))2(μ-OH)]ClO4 () were synthesized and characterized. In the solid state, both structures are asymmetric, with unsupported (hydr)oxo bridges. Intramolecular hydrogen bonding of the ligand NH groups to the phenolate O atoms hold the diiron cores in a bent configuration (Fe-O-Fe angle of 143.7° for and 140.1° for ). A new phenolate bridged diferrous complex, [(FeL)2] (), was synthesized and characterized. Upon exposure to air the diferrous complex is oxidized to the diferric . Cyclic voltammetry at different scan rates and chemical reduction of [(FeL)2(μ-OH)]BPh4 () with cobaltocene revealed disproportionation followed by proton transfer, and a mixed-valence species could not be trapped. Subsequent exposure to molecular oxygen results in the formation of . Electrochemical studies of indicate easier reduction of the diiron(iii/iii) to the mixed-valence state than for . The protonation of by benzoic acid to form [(FeL)2(μ-OH)](+) only changes the Fe-O-Fe angle by 5° (from 143.7° to 138.6°), and the pKa of the hydroxo bridge is estimated to be about 20.4. We attribute this high pKa partly to stabilization of the benzoate by hydrogen bonding to the ligand's amine proton. Magnetic susceptibility studies on solid samples of and yielded values of the antiferromagnetic exchange coupling constants, J, for these S = 5/2 dimers of -13.1 cm(-1) and -87.5 cm(-1), respectively, typical of such unsupported hydroxo- and oxo-bridges.

Structural insights into the catalytic mechanism of aldehyde-deformylating oxygenases

The fatty alk(a/e)ne biosynthesis pathway found in cyanobacteria gained tremendous attention in recent years as a promising alternative approach for biofuel production. Cyanobacterial aldehyde-deformylating oxygenase (cADO), which catalyzes the conversion of Cn fatty aldehyde to its corresponding Cn-1 alk(a/e)ne, is a key enzyme in that pathway. Due to its low activity, alk(a/e)ne production by cADO is an inefficient process. Previous biochemical and structural investigations of cADO have provided some information on its catalytic reaction. However, the details of its catalytic processes remain unclear. Here we report five crystal structures of cADO from the Synechococcus elongates strain PCC7942 in both its iron-free and iron-bound forms, representing different states during its catalytic process. Structural comparisons and functional enzyme assays indicate that Glu144, one of the iron-coordinating residues, plays a vital role in the catalytic reaction of cADO. Moreover, the helix where Glu144 resides exhibits two distinct conformations that correlates with the different binding states of the di-iron center in cADO structures. Therefore, our results provide a structural explanation for the highly labile feature of cADO di-iron center, which we proposed to be related to its low enzymatic activity. On the basis of our structural and biochemical data, a possible catalytic process of cADO was proposed, which could aid the design of cADO with improved activity.

Triptycene-based Bis(benzimidazole) Carboxylate-Bridged Biomimetic Diiron(II) Complexes

A triptycene-based bis(benzimidazole) ester ligand, L3, was designed to enhance the electron donating ability of the heterocyclic nitrogen atoms relative to those of the first generation bis(benzoxazole) analogs, L1 and L2. A convergent synthesis of L3 was designed and executed. Three-component titration experiments using UV-visible spectroscopy revealed that the desired diiron(II) complex could be obtained with a 1:2:1 ratio of L3:Fe(OTf)2(MeCN)2:external carboxylate reactants. X-ray crystallographic studies of two diiron complexes derived in this manner from L3 revealed their formulas to be [Fe2L3(μ-OH)(μ-O2CR)(OTf)2], where R = 2,6-bis(p-tolyl)benzoate (7) or triphenylacetate (8). The structures are similar to that of a diiron complex derived from L1, [Fe2L1(μ-OH)(μ-O2CArTol)(OTf)2] (9) with a notable difference being that, in 7 and 8, the geometry at iron more closely resembles square-pyramidal than trigonal-bipyramidal. Mössbauer spectroscopic analyses of 7 and 8 indicate the presence of high-spin diiron(II) cores. These results demonstrate the importance of substituting benzimidazole for benzoxazole for assembling biomimetic diiron complexes with syn disposition of two N-donor ligands, as found in O2-activating carboxylate-bridged diiron centers in biology.

Reactions of acids with naphthyridine-functionalized ferrocenes: protonation and metal extrusion

Reaction of 1,8-naphthyrid-2-yl-ferrocene (FcNP) with a variety of acids affords protonated salts at first, whereas longer reaction time leads to partial demetalation of FcNP resulting in a series of Fe complexes. The corresponding salts [FcNP·H][X] (X = BF(4) or CF(3)SO(3) (1)) are isolated for HBF(4) and CF(3)SO(3)H. Reaction of FcNP with equimolar amount of CF(3)CO(2)H for 12 h affords a neutral complex [Fe(FcNP)(2)(O(2)CCF(3))(2)(OH(2))(2)] (2). Use of excess acid gave a trinuclear Fe(II) complex [Fe(3)(H(2)O)(2)(O(2)CCF(3))(8)(FcNP·H)(2)] (3). Three linear iron atoms are held together by four bridging trifluoroacetates and two aqua ligands in a symmetric fashion. Reaction with ethereal solution of HCl afforded [(FcNP·H)(3)(Cl)][FeCl(4)](2) (4) irrespective of the amount of the acid used. Even the picric acid (HPic) led to metal extrusion giving rise to [Fe(2)(Cl)(2)(FcNP)(2)(Pic)(2)] (5) when crystallized from dichloromethane. Metal extrusion was also observed for CF(3)SO(3)H, but an analytically pure compound could not be isolated. The demetalation reaction proceeds with an initial proton attack to the distal nitrogen of the NP unit. Subsequently, coordination of the conjugate base to the electrophilic Fe facilitates the release of Cp rings from metal. The conjugate base plays an important role in the demetalation process and favors the isolation of the Fe complex as well. The 1,1'-bis(1,8-naphthyrid-2-yl)ferrocene (FcNP(2)) does not undergo demetalation under identical conditions. Two NP units share one positive charge causing the Fe-Cp bonds weakened to an extent that is not sufficient for demetalation. X-ray structure of the monoprotonated FcNP(2) reveals a discrete dimer [(FcNP(2)·H)](2)[OTf](2) (6) supported by two N-H···N hydrogen bonds. Crystal packing and dispersive forces associated with intra- and intermolecular π-π stacking interactions (NP···NP and Cp···NP) allow the formation of the dimer in the solid-state. The protonation and demetalation reactions of FcNP and FcNP(2) with a variety of acids are reported.

Evaluating the identity and diiron core transformations of a (μ-oxo)diiron(III) complex supported by electron-rich tris(pyridyl-2-methyl)amine ligands

The composition of a (μ-oxo)diiron(III) complex coordinated by tris[(3,5-dimethyl-4-methoxy)pyridyl-2-methyl]amine (R(3)TPA) ligands was investigated. Characterization using a variety of spectroscopic methods and X-ray crystallography indicated that the reaction of iron(III) perchlorate, sodium hydroxide, and R(3)TPA affords [Fe(2)(μ-O)(μ-OH)(R(3)TPA)(2)](ClO(4))(3) (2) rather than the previously reported species [Fe(2)(μ-O)(OH)(H(2)O)(R(3)TPA)(2)](ClO(4))(3) (1). Facile conversion of the (μ-oxo)(μ-hydroxo)diiron(III) core of 2 to the (μ-oxo)(hydroxo)(aqua)diiron(III) core of 1 occurs in the presence of water and at low temperature. When 2 is exposed to wet acetonitrile at room temperature, the CH(3)CN adduct is hydrolyzed to CH(3)COO(-), which forms the compound [Fe(2)(μ-O)(μ-CH(3)COO)(R(3)TPA)(2)](ClO(4))(3) (10). The identity of 10 was confirmed by comparison of its spectroscopic properties with those of an independently prepared sample. To evaluate whether or not 1 and 2 are capable of generating the diiron(IV) species [Fe(2)(μ-O)(OH)(O)(R(3)TPA)(2)](3+) (4), which has previously been generated as a synthetic model for high-valent diiron protein oxygenated intermediates, studies were performed to investigate their reactivity with hydrogen peroxide. Because 2 reacts rapidly with hydrogen peroxide in CH(3)CN but not in CH(3)CN/H(2)O, conditions that favor conversion to 1, complex 1 is not a likely precursor to 4. Compound 4 also forms in the reaction of 2 with H(2)O(2) in solvents lacking a nitrile, suggesting that hydrolysis of CH(3)CN is not involved in the H(2)O(2) activation reaction. These findings shed light on the formation of several diiron complexes of electron-rich R(3)TPA ligands and elaborate on conditions required to generate synthetic models of diiron(IV) protein intermediates with this ligand framework.

Evolution of strategies to prepare synthetic mimics of carboxylate-bridged diiron protein active sites

We present a comprehensive review of research conducted in our laboratory in pursuit of the long-term goal of reproducing the structures and reactivity of carboxylate-bridged diiron centers used in biology to activate dioxygen for the conversion of hydrocarbons to alcohols and related products. This article describes the evolution of strategies devised to achieve these goals and illustrates the challenges in getting there. Particular emphasis is placed on controlling the geometry and coordination environment of the diiron core, preventing formation of polynuclear iron clusters, maintaining the structural integrity of model complexes during reactions with dioxygen, and tuning the ligand framework to stabilize desired oxygenated diiron species. Studies of the various model systems have improved our understanding of the electronic and physical characteristics of carboxylate-bridged diiron units and their reactivity toward molecular oxygen and organic moieties. The principles and lessons that have emerged from these investigations will guide future efforts to develop more sophisticated diiron protein model complexes.

Structural diversity in metal complexes with a dinucleating ligand containing carboxyamidopyridyl groups

The synthesis of a (carboxyamido)pyridinepyrazolate (H(5)bppap) dinucleating ligand is described. Bimetallic iron and cobalt complexes of H(5)bppap ([M(II)(2)H(2)bppap](+)) showed structural differences in both their primary and secondary coordination spheres. The binding of small molecules into the preorganized ligand cavity is verified by the hydration of [Fe(II)(2)H(2)bppap](+) and [Co(II)(2)H(2)bppap](+), leading to the formation of complexes [{Co(II)(OH)}Co(II)H(3)bppap](+) and [{Fe(II)(OH)}Fe(II)H(3)bppap](+), in which one of the metal centers has a terminal hydroxo ligand.

Toward functional carboxylate-bridged diiron protein mimics: achieving structural stability and conformational flexibility using a macrocylic ligand framework

A dinucleating macrocycle, H(2)PIM, containing phenoxylimine metal-binding units has been prepared. Reaction of H(2)PIM with [Fe(2)(Mes)(4)] (Mes = 2,4,6-trimethylphenyl) and sterically hindered carboxylic acids, Ph(3)CCO(2)H or Ar(Tol)CO(2)H (2,6-bis(p-tolyl)benzoic acid), afforded complexes [Fe(2)(PIM)(Ph(3)CCO(2))(2)] (1) and [Fe(2)(PIM)(Ar(Tol)CO(2))(2)] (2), respectively. X-ray diffraction studies revealed that these diiron(II) complexes closely mimic the active site structures of the hydroxylase components of bacterial multicomponent monooxygenases (BMMs), particularly the syn disposition of the nitrogen donor atoms and the bridging μ-η(1)η(2) and μ-η(1)η(1) modes of the carboxylate ligands at the diiron(II) centers. Cyclic voltammograms of 1 and 2 displayed quasi-reversible redox couples at +16 and +108 mV vs ferrocene/ferrocenium, respectively. Treatment of 2 with silver perchlorate afforded a silver(I)/iron(III) heterodimetallic complex, [Fe(2)(μ-OH)(2)(ClO(4))(2)(PIM)(Ar(Tol)CO(2))Ag] (3), which was structurally and spectroscopically characterized. Complexes 1 and 2 both react rapidly with dioxygen. Oxygenation of 1 afforded a (μ-hydroxo)diiron(III) complex [Fe(2)(μ-OH)(PIM)(Ph(3)CCO(2))(3)] (4), a hexa(μ-hydroxo)tetrairon(III) complex [Fe(4)(μ-OH)(6)(PIM)(2)(Ph(3)CCO(2))(2)] (5), and an unidentified iron(III) species. Oxygenation of 2 exclusively formed di(carboxylato)diiron(III) compounds, a testimony to the role of the macrocylic ligand in preserving the dinuclear iron center under oxidizing conditions. X-ray crystallographic and (57)Fe Mössbauer spectroscopic investigations indicated that 2 reacts with dioxygen to give a mixture of (μ-oxo)diiron(III) [Fe(2)(μ-O)(PIM)(Ar(Tol)CO(2))(2)] (6) and di(μ-hydroxo)diiron(III) [Fe(2)(μ-OH)(2)(PIM)(Ar(Tol)CO(2))(2)] (7) units in the same crystal lattice. Compounds 6 and 7 spontaneously convert to a tetrairon(III) complex, [Fe(4)(μ-OH)(6)(PIM)(2)(Ar(Tol)CO(2))(2)] (8), when treated with excess H(2)O.