Fiber Bragg grating temperature sensor for practical use

In-Bulk Temperature Profile Mapping Using Fiber Bragg Grating in Fluids

The capabilities of Fiber Bragg Grating (FBG) sensors to measure temperature variations in the bulk of liquid flows were considered. In the first step of our research project, reported in this paper, we investigated to what extent the use of thin glass fibers without encapsulation, which only minimally disturb a flow, can fulfill the requirements for robustness and measurement accuracy. Experimental tests were performed in a benchmark setup containing 24 FBG measuring positions, which were instrumented in parallel with thermocouples for validation. We suggest a special assembly procedure in which the fiber is placed under a defined tension to improve its stiffness and immobility for certain flow conditions. This approach uses a single FBG sensor as a reference that measures the strain effect in real time, allowing accurate relative temperature measurements to be made at the other FBG sensor points, taking into account an appropriate correction term. Absolute temperature readings can be obtained by installing another well-calibrated, strain-independent thermometer on the reference FBG. We demonstrated this method in two test cases: (i) a temperature gradient with stable density stratification in the liquid metal GaInSn and (ii) the heating of a water column using a local heat source. In these measurements, we succeeded in recording both spatial and temporal changes in the linear temperature distribution along the fiber. We present the corresponding results from the tests and, against this background, we discuss the capabilities and limitations of this measurement technique with respect to the detection of temperature fields in liquid flows.

Advantageous Strain Sensing Performances of FBG Strain Sensors Equipped with Planar UV-Curable Resin

The existing optical strain sensors based on fiber Bragg grating (FBG) have limitations, such as a complex structure, a limited strain range (±200 με) and poor linearity performance (R-squared value < 0.9920); these limitations affect their potential practical applications. Here, four FBG strain sensors equipped with planar UV-curable resin are investigated. The proposed FBG strain sensors have a simple structure, a large strain range (±1800 με) and excellent linearity performance (R-squared value ≥ 0.9998); they further produce the following performances: (1) good optical properties, including an undistorted Bragg peak shape, narrow bandwidth (-3 dB bandwidth ≤ 0.65 nm) and a high side mode suppression ratio (SMSR, the absolute value of SMSR ≥ 15 dB); (2) good temperature sensing properties with high temperature sensitivities (≥47.7 pm/°C) and a good linearity performance (R-squared value ≥ 0.9990); and (3) excellent strain sensing properties with no hysteresis behavior (hysteresis error ≤ 0.058%) and excellent repeatability (repeatability error ≤ 0.045%). Based on their excellent properties, the proposed FBG strain sensors are expected to be applied as high-performance strain sensing devices.

Ultrafast and temperature-insensitive strain interrogation using a PM-PCF based Sagnac loop interferometer and wavelength-to-time mapping

A novel approach for ultrafast and temperature-insensitive strain interrogation using a polarization-maintaining photonic crystal fiber (PM-PCF) based Sagnac loop interferometer (SLI) and linear wavelength-to-time (WTT) mapping is proposed and experimentally demonstrated. The PM-PCF incorporated in the SLI is used as the sensing element to achieve stable strain sensing with ultra-low temperature-dependence due to its intrinsic thermal insensitivity, which can be used to eliminate the cross-sensitivity effect and increase the measurement accuracy. A dispersive element is employed to realize the WTT mapping and real-time strain interrogation is obtained by converting the strain-encoded wavelength shift to time shift in the temporal domain, which can be directly monitored by a real-time oscilloscope. The proposed system offers an ultrafast interrogation speed of 100 MHz and a strain sensitivity of -0.17 ps/με.

Fibre Optic FBG Sensors for Monitoring of the Temperature of the Building Envelope

Standard sensors for the measurement and monitoring of temperature in civil structures are liable to mechanical damage and electromagnetic interference. A system of purpose-designed fibre optic FBG sensors offers a more suitable and reliable solution—the sensors can be directly integrated with the load-bearing structure during construction, it is possible to create a network of fibre optic sensors to ensure not only temperature measurements but also measurements of strain and of the moisture content in the building envelope. The paper describes the results of temperature measurements of a building 2-layer wall using optical fibre Bragg grating (FBG) sensors and of a three-layer wall using equivalent classical temperature sensors. The testing results can be transmitted remotely. In the first stage, the sensors were tested in a climatic test chamber to determine their characteristics. The paper describes test results of temperature measurements carried out in the winter season for two multilayer external walls of a building in relation to the environmental conditions recorded at that time, i.e., outdoor temperature, relative humidity, and wind speed. Cases are considered with the biggest difference in the level of the relative humidity of air recorded in the observation period. It is found that there is greater convergence between the theoretical and the real temperature distribution in the wall for high levels (~84%) of the outdoor air relative humidity, whereas at the humidity level of ~49%, the difference between theoretical and real temperature histories is substantial and totals up to 20%. A correction factor is proposed for the theoretical temperature distribution.

Uracil-doped DNA thin solid films: a new way to control optical dispersion of DNA film using a RNA constituent

Among five nucleobases, adenine (A), guanine (G), cytosine (C), thymine (T) and uracil (U), uracil is a key distinctive constituent existing only in ribonucleic acid (RNA). RNA shares the common A, G, and C with deoxyribonucleic acid (DNA) made of A-T, G-C hydrogen bonding. We explored a new attempt to combine uracil (U) with DNA, successfully realizing U-doped DNA thin solid films for the first time. Impacts of uracil on optical properties of the films were thoroughly investigated. The method was based on optimal spin-coating of an aqueous solution of DNA and uracil over silicon or silica substrates. Optical absorption of both aqueous solution and U-doped DNA thin solid films was characterized in a wide spectral range covering UV-visible-IR. Immobilization of uracil within DNA thin solid films was experimentally confirmed by FTIR spectroscopy studies. By using an ellipsometer, we measured the refractive indices of the films and discovered that U-doping was a very effective means to control optical dispersion DNA thin solid film. We further investigated thermo-optic behavior to find impacts of U-doping in DNA films. Detailed thin film processes and optical characterizations are discussed.

Experimental Demonstration of Temperature Sensing with Packaged Glass Bottle Microresonators

Whispering gallery mode (WGM) glass bottle microresonators are potential highly sensitive structures for a variety of physical and bio-chemical sensing applications. In this paper, we experimentally demonstrate the practical use of glass bottle resonators as temperature sensors. The basic parameters, such as WGM resonance wavelengths, free spectral ranges, and Q factors, have been investigated by coupling light from a tapered fiber to the bottle structure. We show the spectral characteristics of the WGMs by choosing different bottle dimensions and taper diameters. For practical measurements, a robust 3D-printed package that includes the bottle resonator and the tapered fiber has been proposed. The packaged bottle has a central diameter D_c = 207 µm and a length L = 300 µm. Temperature sensing experiments were also performed. A linear response of the WGM shifts as a function of the temperature is confirmed. The fitted experimental data indicate a temperature sensitivity of 10.5 pm/K at λ ~ 1550 nm, resulting in a limit of detection of 0.06 K. These values can be compared with values reported for other WGM resonators. Additionally, bottle resonators are made with simple splicing methods and their assembly method can be easily defined due to large coupling tolerances.

Thermo-optic characteristic of DNA thin solid film and its application as a biocompatible optical fiber temperature sensor

We report unique thermo-optical characteristics of DNA-Cetyl tri-methyl ammonium (DNA-CTMA) thin solid film with a large negative thermo-optical coefficient of -3.4×10^-4/°C in the temperature range from 20°C to 70°C without any observable thermal hysteresis. By combining this thermo-optic DNA film and fiber optic multimode interference (MMI) device, we experimentally demonstrated a highly sensitive compact temperature sensor with a large spectral shift of 0.15 nm/°C. The fiber optic MMI device was a concatenated structure with single-mode fiber (SMF)-coreless silica fiber (CSF)-single mode fiber (SMF) and the DNA-CTMA film was deposited on the CSF. The spectral shifts of the device in experiments were compared with the beam propagation method, which showed a good agreement.

Fiber surface Bragg grating waveguide for refractive index measurements

A fiber surface Bragg grating waveguide (BGW) fabricated in the surface of single-mode fiber by direct femtosecond laser inscription is demonstrated and successfully applied for refractive index (RI) measurements. Prior to laser inscription of the fiber surface BGW, an X-coupler is first inscribed across the fiber core to couple light from the core to the fiber surface. The light transmitted in the fiber surface BGW efficiently interacts with the surrounding medium due to a strong evanescent field, and obtains an acceptable RI sensitivity approaching ∼16  nm/RIU. The novel design efficiently couples the light guided in the core with the surrounding medium using a non-destructive, single-step micromachining process, and is expected to have potential applications in fiber biochemical sensing.