Early failure of intramedullary nailing for proximal humeral fractures

Complications following intramedullary nailing of proximal humerus and humeral shaft fractures: a systematic review

HYPOTHESIS

The purpose of this study was to systematically review complications arising from intramedullary nailing (IMN) of proximal and humeral shaft fractures. This study hypothesized that there would be a low rate of complications and revision among patients treated with IMN for humerus fractures.

METHODS

Two independent reviewers performed a literature search in the PubMed database based on Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Studies were included if they reported on outcomes following the use of intramedullary nails for proximal humerus fractures or humeral shaft fractures. Variables that were collected included complications, visual analog scale pain scores and revision operations.

RESULTS

Overall, 179 studies met the inclusion criteria, with 7984 shoulders. The average age of patients in this study was 55.2 years and 60.7% of patients were female. The mean follow-up was 16.6 months. The overall complication rate for all fractures treated with intramedullary nails was 18.9%, and the overall revision rate was 6.8%. Among the complications were fracture complications (7.5%), hardware complications (7.2%), soft tissue complications (1.8%), neurovascular complications (1.6%), and infection (0.8%). Four-part proximal humerus fractures (52.9%) and open fractures (36.7%) had the highest rates of complication. Among the reasons for revision were hardware removal or replacement (5.0%), conversion to arthroplasty (0.6%), and other (1.2%). The mean visual analog scale pain score at last follow-up was 1.6.

CONCLUSION

Overall, there was a moderate rate of complications but low rate of revision following IMN of humerus fractures. Open fractures and 4-part proximal humerus fractures had the highest complication rates.

Risk factors and complications in surgical management of proximal humeral fractures: a retrospective analysis of 132 cases

Proximal humeral fractures (PHF), ranking as the third most common osteoporotic fractures, pose a significant challenge in management. With a rising incidence in an aging population, controversy surrounds surgical versus nonoperative treatments, particularly for displaced 3- and 4-part fractures in older patients. Locking plates (LP) and proximal intramedullary nails (PHN) are primary choices for surgical intervention, but both methods entail complications. This retrospective study of 132 patients undergoing surgery for PHF (LP or PHN) aims to identify risk factors for postoperative complications. Results reveal a 31% complication rate, including secondary loss of reduction (17%) and intra-articular screw penetration (13%). Alcohol abuse emerges as the sole patient characteristic linked to complications. Non-anatomical surgical reduction, calcar comminution, and humeral shaft displacement over 10 mm also contribute to increased risks. LP and PHN show comparable complication rates, aligning with existing literature. The study underscores the pivotal role of achieving anatomical surgical reduction in minimizing complications. Surgical technique, fracture pattern, and patient characteristics significantly influence outcomes. Notably, alcohol abuse surfaces as a critical risk factor. The findings emphasize the importance of a nuanced approach to PHF management, tailoring interventions based on fracture characteristics and patient factors. Future research should explore these aspects, particularly in younger patient populations, to enrich our understanding of surgical outcomes in diverse age groups.

Third-generation intramedullary nailing for displaced proximal humeral fractures in the elderly: quality of life, clinical results, and complications

INTRODUCTION

Antegrade insertion of third-generation intramedullary nail (IMN) has been shown to provide excellent results in young patients for treatment of displaced two-part surgical neck fracture. In elderly patients, osteoporosis makes internal fixation problematic and frequently contributes to failed fixation and poor clinical results. The purpose of this study was to report the health-related quality of life (HRQoL), functional results, and postoperative complications obtained with straight third-generation antegrade nailing of proximal humerus fractures (PHFs) in elderly patients.

METHODS

A retrospective review of 32 patients aged 80 y.o. or older presenting a two-part or three-part PHFs treated with a straight IMN with a minimum follow-up of 12 months. Results assessed included 1) radiographic measures 2) clinical data: Charlson Comorbidity Index (CCI), VAS, range of motion (ROM), Individual Relative Constant score (IRC), Simple Shoulder Test (SST) and 3) Health-related Quality of life (HRQoL) with the EQ-5D index/EQ-VAS.

RESULTS

Mean age was 82.1 (range 80-90) and mean follow-up was 45.6 months (range 16-53 months) with 91% of female patients and a mean CCI 4.6. 81% were two-part surgical neck fractures and 19% were three-part greater tuberosity fractures. The mean neck-shaft angle (NSA) at final follow-up was 132º ± 17.9º. 15.6% underwent hardware removal because of subacromial impingement and one patient (3%) was revised to RSA because of severe secondary fracture displacement. Mean IRC was 67,7 ± 30, the mean SST and VAS-Pain were 8.1 ± 3.1 and 3.2 ± 3.2, respectively, and the mean EQ-5D/EQ-VAS were 0.40 ± 0.33/64.2 ± 8.9. At last review, mean active forward flexion, abduction, and external rotation were 115º ± 35º, 100º ± 35º, and 20º ± 15º, respectively.

CONCLUSION

Appropriate selection of fracture and proper operative technique with a third-generation nail result in good functional results and good HRQol with a low complication rate in elderly population.

ESTES recommendations on proximal humerus fractures in the elderly

PURPOSE

The section for the skeletal trauma and sport's injuries of the European Society for Trauma and Emergency Surgery (ESTES) appointed a task force group to reach a consensus among European countries on proximal humeral fractures.

MATERIAL/METHODS

The task force group organized several consensus meetings until a paper with final recommendations was confirmed during the ESTES Executive Board meeting in Berlin on 25 October 2018.

CONCLUSION

The Recommendations compare conservative and four possible operative treatment options (ORIF, nailing, hemi- and total reverse arthroplasty) and enable the smallest common denominator for the surgical treatment among ESTES members.

Reverse shoulder arthroplasty for fracture sequelae: Clinical outcome and prognostic factors

BACKGROUND

The reverse total shoulder arthroplasty (RTSA) is a common therapy for the fracture sequelae (FS) of the proximal humerus. The aim of this study was to show the short and midterm clinical outcome of the RTSA for FS and to identify prognostic factors.

METHODS

Data from 46 patients with chronic FS who underwent RTSA were analysed. The clinical follow-up included the Constant score and radiographic examination. Patients were divided into groups based on the Boileau classification of FS, and the degree of metaphyseal bone loss was measured (Boileau type I 9 patients; type II 3 patients; type III 8 patients and type IV 16 patients). Scapular notching was assessed according to the classification of Sirveaux.

RESULTS

The mean postoperative Constant score was 57. Clinical outcomes were similar among the various FS groups, as defined according to the Boileau classification, but patients who had undergone revision arthroplasty had a significantly inferior mean Constant score than patients with type IV FS. There were no significant differences between patients who were initially managed with conservative therapy and those treated surgically. Patients with metaphyseal bone loss >3 cm showed inferior clinical scores. Inferior scapular notching was seen in 25 patients, and had a negative effect on the clinical outcome. Complications included five infections and one dislocation.

CONCLUSION

Metaphyseal bone loss was unfavourable prognostic factors in patients with FS treated with RTSA. However, the Boileau classification did not serve as a prognostic criterion. Previous operative or conservative treatment had no influence on the outcome and scapular notching was associated with inferior clinical results.

Evaluation of intramedullary nail fixation via the Neviaser portal for proximal humerus fracture

OBJECTIVES

To our knowledge, no cases have been reported so far regarding the treatment of proximal humerus fracture with intramedullary nail fixation via the Neviaser portal. This study aimed at evaluating the results of intramedullary nail fixation via the Neviaser portal for proximal humerus fracture.

METHODS

Four patients with 2-part proximal humerus fracture, who underwent the intramedullary nail fixation via the Neviaser portal, were included in this study. All the patients were females, and the mean age was 78.8 years. We evaluated their clinical and radiographic findings retrospectively.

RESULTS

The mean follow-up period was 12 months. All the patients achieved a bone-union without severe complications, such as deep wound infections or any neurological deficits. At the final follow-up, mean shoulder flexion, abduction, and external rotation were 123.5°, 118°, and 36°, respectively. Mean visual analog pain scale (VAS) score at the final follow-up was 21/100. Complications related to the implants were observed in two patients. In one patient, protrusion of the proximal tip of the nail occurred from the entry point, and this caused secondary subacromial impingement. In the other patient, insertion of the end-cap from the Neviaser portal was not possible, and this resulted in the failure of fixation postoperatively.

CONCLUSION

The Neviaser portal may be suitable for the insertion of an intramedullary nail, because it facilitates to make an entry-point at the top of the humeral head. However, the problems related to the use of the present instruments still remain and need to be improved.

Surgical technique and early outcomes of intramedullary nailing of displaced proximal humeral fractures in an Asian population using a contemporary straight nail design

BACKGROUND

Despite being a common orthopedic injury, the optimal management of proximal humeral fractures remains a topic of debate. Although intramedullary nails have been used to treat these fractures, several complications have been reported with older nail devices. We describe our surgical technique and aim to evaluate the early functional and radiological outcomes of displaced Neer's two- to four-part proximal humeral fractures undergoing fixation with a contemporary straight intramedullary nail.

METHODS

A prospective cohort study of 22 consecutive patients (mean age 55.7 ± 18.0) with acute displaced proximal humeral fractures underwent intramedullary nailing (Depuy Synthes MultiLoc Humeral Nail) by a single surgeon in a single institution. According to Neer's classification, 11 had two-part fractures, 9 had three-part fractures, and 2 had four-part fractures. Functional and radiological outcomes, as well as occurrence of complications, were assessed at 12 months postoperatively.

RESULTS

The mean Constant-Murley score and American Shoulder and Elbow Surgeons score at 12 months were 75.5 ± 12.1 and 81.7 ± 6.2, respectively. Mean range of motion was forward flexion 144.3 ± 28.4, abduction 141.3 ± 30.5, external rotation 58.0 ± 13.9, and internal rotation 62.0 ± 15.2. Mean visual analog scale score was 1.7 ± 0.8. Radiographic fracture union was achieved at a mean of 3 months post-op. One patient underwent a second surgery for screw removal due to a proximal screw backing out. No other complications were found in our cohort. Notably, no patients had clinical signs and symptoms of subacromial impingement and/or rotator cuff tear.

CONCLUSION

Our study demonstrated that intramedullary nailing using the contemporary straight nail design is well suited for Neer's two- and three-part proximal humeral fractures, with good early outcomes and low rates of complications. Results for four-part fractures were, however, inferior in our cohort, suggesting that further studies with larger patient numbers are needed to determine the role of intramedullary nailing for four-part fractures.

A new nail with a locking blade for complex proximal humeral fractures

INTRODUCTION

The objective of this study was to assess the clinical outcome of displaced proximal humerus fracture treated with a new locking blade nail.

MATERIALS AND METHODS

This prospective study included a series of 92 patients with acute fracture of the proximal humerus treated in one hospital level I trauma centre with locking blade nail between December 2010 and December 2013. According to the Neer classification, all fractures were two- to four-part fractures. Age adopted Constant score, DASH and visual analogue scores were used as outcome measures.

RESULTS

A total of 92 patients were enrolled in the study. However, 29 patients were excluded due to loss to follow-up and death. Ultimately, 63 patients were available for final follow-up and data analysis. The mean duration of follow-up was 22 months (range 16-48 months). On average at 1 year, all fractures had united. The mean weighted Constant score was 84.2 % and the median disabilities of the arm, shoulder and hand (DASH) score was 26, the range of elevation was 115 and range of abduction was 97. The head shaft angle was 130, and pain visual analogue was 1.6. We found that 5 of the 63 patients (8 %) demonstrated complications. Two patients (3 %) displayed secondary displacement and require device removal. Two patients (3 %) had impingement due to prominent metal work, and one patient had a superficial wound infection which was treated with a course of antibiotics.

CONCLUSION

Our study shows excellent results with new locking blade nail for displaced proximal humerus fractures. We think the locking blade nail offers stiff triangular fixation of the head fragment and support of the medial calcar region to prevent secondary varus collapse.

LEVEL OF EVIDENCE

III.

Treatment of two-part fractures of the surgical neck of the humerus using a locked metaphyseal intramedullary nail proximally with angular stability

OBJECTIVES

To evaluate the functional results from patients with surgical neck fractures treated with a locked metaphyseal intramedullary nail and angular stability.

METHODS

Twenty-two patients between the ages of 21 and 69 years were evaluated prospectively between January 2010 and January 2011. Their time taken for consolidation, age, sex, complications and functional results were correlated using the modified protocol of the University of California at Los Angeles (UCLA).

RESULTS

The mean time taken for consolidation was 9.26 weeks ± confidence interval (CI) of 0.40 weeks. One case (4.5%) did not become consolidated. There were no cases of infection. There was one case (4.5%) of adhesive capsulitis with good evolution through clinical treatment. Five patients (22.7%) presented occasional mild pain and one case (4.5%) reported medium-intensity pain associated with the subacromial impact of the implant. The mean score on the modified UCLA scale was 30.4 ± CI 1.6 points, obtained at the end of 12 weeks of evaluation: 18 cases (81.8%) with "excellent" and "good" scores, three cases (13.6%) with "fair" scores and one case (4.5%) with a "poor" score.

CONCLUSION

In the group of patients evaluated, treatment of two-part surgical neck fractures by means of a locked metaphyseal intramedullary nail and angular stability demonstrated satisfactory functional results and a low complication rate, similar to what is seen in the literature.

Three-dimensional analyses of proximal humeral fractures using computed tomography with multiplanar reconstruction: early stability of fixation after osteosynthesis in relation to preoperative bone quality

The purpose of this study was to evaluate the relationship between the bone quality of the humeral head measured by CT multiplanar reconstruction images (MPR) and the stability of nail or plate fixation and to compare the clinical outcomes of these procedures in patients with proximal humeral fractures. Thirty-six consecutive patients (nail group: n = 18, plate group: n = 18) were investigated. In nail group, 14 cases were classified as two-part fractures, three cases were classified as three-part fractures and one case was classified as four-part fractures. In plate group, three cases were classified as two-part fractures, nine cases were classified as three-part fractures and six cases were classified as four-part fractures. Both clinical and radiological outcomes were assessed. In addition, the percentage of trabecular bone volume of the humeral head was calculated using preoperative CT-MPR images. Three patients in the nail group underwent reoperation. In contrast, no patients in the plate group underwent reoperation. In nail group, six of 18 (33%) patients demonstrated poor results (three underwent reoperation, and three had varus displacements >10º) and had bone volume percentages (axial image) that were significantly lower than those observed in the patients with good results. The cutoff point of trabecular bone volume required to obtain satisfactory results after surgical treatment using intramedullary nail was 78%. The results of this study suggest that the bone volume of the humeral head calculated using CT-MPR images provides useful information, in addition to the type of fracture, when selecting fixation devices for osteosynthesis of proximal humeral fracture.

Short, locked humeral nailing via Neviaser portal: an anatomic study

OBJECTIVE

Supraspinatus tendon trauma may contribute to residual shoulder pain after nail fixation for proximal humeral fractures. Some have proposed a more medial starting point for humeral nail insertion to avoid cuff tendon footprint damage. We hypothesized that percutaneous nail insertion via Neviaser portal would not only be possible, but would avoid tendon trauma, while sacrificing articular cartilage.

MATERIALS AND METHODS

Under c-arm guidance and in percutaneous fashion, we nailed 16 consecutive complete (head and neck, etc, intact) specimen right proximal humeri with locked short humeral nails (Aequalis) via Neviaser portal. Each shoulder was dissected to study the damage to the rotator cuff and long head of the biceps tendons as well as to the articular surfaces. We measured the humeral-thoracic abduction arc before the damaged articular surface contacted the superior glenoid. There were 5 male specimens and 11 female specimens with a mean age of 83 years at the time of death.

RESULTS

We successfully inserted 15 of 16 humeral nails through this percutaneous approach. No supraspinatus tendon or long head of the biceps tendon was damaged. All nails passed entirely through supraspinatus muscle belly. Thirteen of 15 starting points were entirely on articular surface. Mean arc of abduction before superior glenoid contact was 76 degrees (range, 50 degrees-130 degrees). Mean distance from the edge of the articular surface to the most lateral part of the nail insertion was 11 mm (0-25 mm).

CONCLUSIONS

Short, locked humeral nail insertion is possible in percutaneous fashion via Neviaser portal without tendon injury. However, successful insertion comes at the cost of articular cartilage damage.

Evaluation and management of proximal humerus fractures

Proximal humerus fractures are common injuries, especially among older osteoporotic women. Restoration of function requires a thorough understanding of the neurovascular, musculotendinous, and bony anatomy. This paper addresses the relevant anatomy and highlights various management options, including indication for arthroplasty. In the vast majority of cases, proximal humerus fractures may be treated nonoperatively. In the case of displaced fractures, when surgical intervention may be pursued, numerous constructs have been investigated. Of these, the proximal humerus locking plate is the most widely used. Arthroplasty is generally reserved for comminuted 4-part fractures, head-split fractures, or fractures with significant underlying arthritic changes. Reverse total shoulder arthroplasty is reserved for patients with a deficient rotator cuff, or highly comminuted tuberosities.

The importance of inferomedial support in the hot air balloon technique for treatment of 3-part proximal humeral fractures

HYPOTHESIS

Inferomedial support may affect the results of the hot air balloon technique for the treatment of displaced, 3-part fractures of the proximal humerus.

METHODS

Forty-three patients with displaced, 3-part fractures of the proximal humerus treated with the hot air balloon technique between 1995 and 2007 were included in the study. All patients were classified into 4 subgroups based on the presence or absence of medial buttress restoration and inferomedial screw insertion (R+, restored with inferomedial screw; R-, restored without inferomedial screw; NR+, non-restored with inferomedial screw; and NR-, non-restored without inferomedial screw). Assessment of radiologic and clinical outcome among subgroups was based on evaluation of neck-shaft angle, American Shoulder and Elbow Surgeons score, and Neer score.

RESULTS

The mean follow-up duration was 65 ± 29.7 months. The change in the neck-shaft angle in the R+, R-, NR+, and NR- groups was 3°, 2°, 3°, and 11°, respectively. The mean American Shoulder and Elbow Surgeons scores in the R+, R-, NR+, and NR- groups were 91 ± 4.8, 86 ± 5.4, 85 ± 1.9, and 77 ± 5.8, respectively. The mean Neer scores in the R+, R-, NR+, and NR- groups were 92 ± 4.3, 88 ± 4.0, 87 ± 2.1, and 76 ± 8.2, respectively.

CONCLUSIONS

Medial buttress restoration and inferomedial screw insertion affect bone-nail construct stability and clinical outcomes.

Locking plate for proximal humeral fracture in the elderly population: serial change of neck shaft angle

Background

We conducted this radiographic study in the elderly population with proximal humeral fracture aiming to evaluate 1) the serial changes of neck-shaft angle after locking plate fixation and 2) find relationship between change in neck shaft angle and various factors such as age, fracture pattern, severity of osteoporosis, medial support and initial reduction angle.

Methods

Twenty-five patients who underwent surgical treatment for proximal humeral fracture with locking plate between September 2008 and August 2010 are included. True anteroposterior and axillary lateral radiographs were made postoperatively and at each follow-up visit. Measurement of neck shaft angle was done at immediate postoperative, 3 months postoperative and a final follow-up (average, 11 months; range, 8 to 17 months). Severity of osteoporosis was assessed using cortical thickness suggested by Tingart et al.

Results

The mean neck shaft angles were 133.6° (range, 100° to 116°) at immediate postoperative, 129.8° (range, 99° to 150°) at 3 months postoperative and 128.4° (range, 97° to 145°) at final follow-up. The mean loss in the neck-shaft angle in the first 3 months was 3.8° as compared to 1.3° in the period between 3 months and final follow-up. This was statistically significant (p = 0.002), indicating that most of the fall in neck shaft angle occurs in the first three months after surgery. Relationship between neck shaft angle change and age (p = 0.29), fracture pattern (p = 0.41), cortical thickness (p = 0.21), medial support (p = 0.63) and initial reduction accuracy (p = 0.65) are not statistically significant.

Conclusions

The proximal humerus locking plate maintains reliable radiographic results even in the elderly population with proximal humerus fracture.

Is it worth fixing proximal humeral fractures at increased vascular risk?

OBJECTIVE

To evaluate fixation of proximal humeral fractures by anterograde nailing, in terms of fracture reduction, bone healing; osteonecrosis; functional consequences of osteonecrosis and malunion.

DESIGN

Prospective, consecutive, multicenter based.

SETTING

Academic Trauma Centers; approval was received from the ethics committee of the institutions involved in the study.

METHODS

Fifty-one patients were enrolled prospectively, with 31 3-part and 20 4-part displaced fractures (head displacement greater than 45°, tuberosity-head gap greater than 10mm, diaphyseal gap greater than 10mm). A Telegraph™ nail (FH Orthopedics, Heimsbrunn, France) was the fixation device used, introduced through a superolateral transdeltoid approach under fluoroscopic guidance. The assessment included Simple Shoulder Test, absolute Constant score, X-rays every 3 months and CT-scan at final evaluation. Twelve patients died and one was lost to follow-up. Immediate complications included secondary displacement in four patients.

RESULTS

There were no infections, no deltoid muscle or axillary nerve damage, and all the fractures united. After a mean follow-up of 24.1 months, malunion was observed in 29% of the remaining 38 patients and osteonecrosis in 32%. Both complications were more frequent and extensive in patients with 4-part fractures. The osteonecrosis area influenced the Constant score, which was 55.8 points when the area was less than 30%, 50.6 points between 30 and 50%, and 38 points when larger than 50%. Head malunion affected the Simple Shoulder Test and the Constant score.

CONCLUSION

Nailing may thus be recommended for 3-part fractures, because osteonecrosis is less frequent, more focused, and better tolerated in this sub-group. In contrast, antegrade nailing was not more beneficial than other internal fixation techniques for preventing osteonecrosis or head malunion in patients with 4-part fractures.

LEVEL OF EVIDENCE

Level IV: prospective study.

Predictive factors for functional outcome and failure in angular stable osteosynthesis of the proximal humerus

INTRODUCTION

Angular stable osteosynthesis has become the gold standard in the operative treatment of proximal humeral fractures. The aim of this article is to determine the indications for osteosynthesis versus primary arthroplasty based on clinical and radiological parameters.

METHODS

A total of 368 surgically treated proximal humeral fractures were reviewed. Preoperative X-rays were used to evaluate the displacement and vascularity of the humeral head (according to the Hertel criteria) and the AO (Arbeitsgemeinschaft für Osteosynthesefragen) fracture type. Postoperative X-rays were analysed to assess the quality of the reduction, the reconstruction of the medial hinge and the displacement of the tuberosities. Follow-up X-rays were used to evaluate healing progress, the occurrence of avascular necrosis, loss of reduction and implant related failures. The American Shoulder and Elbow Surgeons score (ASES score) was used to evaluate the functional outcome. Correlations between a set of variables, type of treatment and eventual outcome were verified in both univariate and multivariate settings, with the significance rate set at p<0.05.

RESULTS

In total, 307 shoulders were evaluated. Mean follow-up was 4.3 years and showed a 15.3% failure rate, a 23.8% re-operation rate and a mean ASES score of 75.3. Better results were noted in patients who were younger at the time of surgery. More displaced fractures, AO type C fractures, varus fracture configuration and reduced head vascularity all led to a worse outcome. Anatomical reduction correlated with better results. Articular fractures had better results when treated with a plate.

CONCLUSION

Surgical treatment of proximal humeral fractures remains difficult, with a failure rate of 15.3% and a re-operation rate of 23.8% at 4.3 years. A significantly displaced varus articular fracture in the older patient results in the worst outcome.

Modern perspectives of open reduction and plate fixation of proximal humerus fractures

Recent innovations have greatly increased the range of proximal humeral fractures that are amenable to open reduction and plate fixation.The optimum technique for some of the more complex fracture patterns is not yet fully refined.This article aims to describe the recent advances in the treatment of complex proximal humeral fractures by open reduction and locking plate fixation, focusing particularly on the indications for surgery, the operative techniques, and the expected outcomes after treatment.

Does the location of the entry point affect the reduction of proximal humeral fractures? A cadaveric study

The selection of the correct entry point for stabilisation of long bone fractures and particularly of the humérus with intramedullary nailing is of paramount importance. The insertion of a nail from the correct entry point ensures anatomical alignment of the head and the shaft fragment. However, particularly for the humérus, the literature addressing this issue is obscure. Twenty cadaveric humeri without soft tissue attachment were studied. Two groups were studied: Group A (straight nail) and Group B (angled nail). A fracture of the surgical neck of the humérus was simulated. Then intramedullary nail was inserted through the correct entry hole. Displacement at the fracture site and force to reduce the displacement were measured. The average horizontal displacement was 2.5 ± 2.2 mm in Group A and 1.9 ± 1.1 mm in Group B. The humeral shaft tended to displace medially. The force required to reduce the produced displacement was usually less than 15 N. Anatomical reduction could not be obtained in 3/20 humeri even after applying a force of over 35 N. Our results of an average displacement of 2 mm following nail insertion, supports the significance of the entry point as a cause of loss of reduction at the fracture site post nail insertion. In most cases, anatomical reduction can be corrected with relative small forces, whereas in the rest the correction of the displacement is not feasible even with the application of substantial forces.

The extended deltoid-splitting approach to the proximal humerus: variations and extensions

Fractures and nonunions of the proximal humerus are increasingly treated by open reduction and internal fixation. The extended deltopectoral approach remains the most widely used for this purpose. However, it provides only limited exposure of the lateral and posterior aspects of the proximal humerus. We have previously described the alternative extended deltoid-splitting approach. In this paper we outline variations and extensions of this technique that we have developed in the management of further patients with these fractures.

New trends in fixation of proximal humeral fractures: a review

Surgical treatment of proximal humeral fractures continues to be a challenge especially in osteoporotic patients. Locking plates and intramedullary nails have been used with satisfactory results but the previous reported complications have not been substantially reduced. Most of the existing studies involve a small number of patients followed up for a rather short period of time. Since proximal humeral fractures constitute a heterogenous group of complex fractures in an even more heterogenous population, no single fixation method is a panacea. Choice of implant and method of fixation should be selected according to individual patient and fracture pattern characteristics based on clearly defined indications and contraindications. Based on the findings of the existing clinical studies the authors propose a treatment algorithm.

Proximal humeral fractures: current concepts in classification, treatment and outcomes

Most proximal humeral fractures are stable injuries of the ageing population, and can be successfully treated non-operatively. The management of the smaller number of more complex displaced fractures is more controversial and new fixation techniques have greatly increased the range of fractures that may benefit from surgery. This article explores current concepts in the classification and clinical aspects of these injuries, reviewing the indications, innovations and outcomes for the most common methods of treatment.

Treatment of proximal humeral fracture with a proximal humeral nail

BACKGROUND

Various treatment options are available for displaced proximal humeral fractures. This study monitored a series of patients treated with a locking proximal humeral nail (PHN).

HYPOTHESIS

Fixation with a PHN can be an effective method when treating patients with two part surgical neck fractures of proximal humerus.

MATERIALS AND METHODS

PHNs were used to surgically repair humeral neck fractures in 22 patients. Factors affecting the final function were analyzed by multiple linear regression.

RESULTS

Mean patient age at the time of surgery was 56.9 years. The mean follow-up was 25.4 months, and all fractures united within 8 weeks. The average active forward flexion was 147.3 degrees , the average external rotation was 44.1 degrees , and the average internal rotation was T10. All patients were satisfied with their results. Two factors associated with patient American Shoulder and Elbow Surgeon scores were patient age and the strength of the supraspinatus.

DISCUSSION

Details in patients choosing and surgical management were discussed.

CONCLUSION

Closed reduction and internal fixation with a PHN can be an effective method for the treatment of 2-part surgical neck fractures.

Treatment of proximal humerus fractures with locking plates: a systematic review

HYPOTHESIS

Locking plates with special configuration for the anatomic region of the proximal humerus have been introduced recently to address the difficulties of stabilizing proximal humeral fractures. The purpose of this study was to carry out a systematic review of the literature on the efficacy and early to medium term functional results of locking plates for stabilization of proximal humeral fractures.

METHODS

Using the PubMed database, a systematic review of the English and German literature was carried out in order to assess the efficacy and complications related to the use of these plates and the patients' functional outcome, using the key words "locking plates proximal humeral fractures," "angular stability plates proximal humeral fractures," "PHILOS plate," and "LPHP plate." Our criteria for eligibility were clinical studies with more than ten cases followed-up, adult patients, and adequate data provided at least in terms of implant related complications. Articles written in English and German language were included. Exclusion criteria were: studies dealing exclusively with 2-part fractures (since this category has a more favorable outcome); experimental studies; case reports; and, literature other than English or German. Each one of the articles was evaluated for quality of the study using the Structured Effectiveness Quality Evaluation Scale (SEQES).

RESULTS

Twelve studies including 791 patients met the inclusion criteria. Patients in these studies continued to improve up to one year, achieving a mean Constant score of 74.3. The incidence of the reported complications was: avascular necrosis 7.9%, screw cut-out 11.6% and re-operation rate 13.7%.

DISCUSSION

The high incidence of cut-out may be secondary to the rigidity of the implant in combination with medial inadequate support, in cases compromised by severe underlying osteoporotic bone. Definition of indications for the use of locking plates and attention on technical aspects of applying them would help optimization of the results.

LEVEL OF EVIDENCE

Systematic Review.

Philos plate fixation for proximal humeral fractures

PURPOSE

To evaluate the efficacy of Philos plate fixation for proximal humerus fractures.

METHODS

Functional outcomes of 31 men and 27 women aged 36 to 73 (mean, 61) years who underwent Philos plate fixation for proximal humeral fractures were retrospectively reviewed. Indications for surgery were 3-part (n=33) or 4-part (n=25) closed proximal humeral fractures with angulation of more than 45 degrees or displacement of more than 1 cm. Functional outcomes and shoulder range of movement were assessed based on the Constant scoring system.

RESULTS

Patients were followed up for 12 to 18 (mean, 15) months. All fractures healed satisfactorily, except in one patient with a valgus 4-part fracture who had malunion. No wound infections, vascular injuries, avascular necrosis, or loss of fixation ensued. Two patients with axillary nerve palsy recovered spontaneously within 3 months. Functional outcome was excellent in 13 patients, good in 36, moderate in 8, and poor in 1. The mean Constant score was 80 (range, 40-100).

CONCLUSION

The Philos plate fixation is appropriate treatment for proximal humeral fractures.

A prospective study of a new locking plate for proximal humeral fracture

Displaced and unstable extra-articular fractures of the proximal humerus are treated by operative reduction and fixation using various techniques such as fixed plates and intramedullary implants. This prospective study evaluates the clinical efficacy of a novel implant that is attached to the humeral head with fixed-angle locking screws. Between October 2002 and November 2005, 99 people (mean age 62.8 years) with proximal humeral fractures received treatment involving this plate in our department. The mean follow-up time was 17.8 months. Outcome was assessed with radiography, the Constant-Murley (C-M) shoulder evaluation and the Disabilities of the Arm, Shoulder and Hand (DASH) score. The mean C-M score was 64.95% and the mean DASH score was 30.1 points. Outcome was judged excellent in 51%, good in 19%, moderate in 19% and poor in 11% of cases.

Prognostic factors for unstable proximal humeral fractures treated with locking-plate fixation

This study evaluated the functional outcomes of proximal humeral fractures treated with locking plates and determined the prognostic factors for successful clinical outcomes. We included 44 patients with 45 unstable proximal humeral fractures. There were 19 two-part, 22 three-part, and 4 four-part fractures. Outcomes were analyzed by use of multivariate linear regression with several different combinations of 7 independent variables: age, fracture pattern, osteoporosis, calcium sulfate graft, rotator cuff suture loop, head-neck shaft angle, and comorbidity. The mean head-shaft angle was 132.4 degrees after the operation and decreased to 127.7 degrees at final follow-up. Five patients showed considerable loss of fixation. The analysis showed that delay in rehabilitation because of comorbidities and decreased head-neck shaft angle induced by lack of medial support were the primary prognostic factors that led to poor outcomes. The absence of comorbidity and the restoration of the medial metaphysis were the most reliable predictors of successful clinical outcomes.

Modified rush pin technique for two- or three-part proximal humeral fractures

PURPOSE

To report the outcomes of modified Rush pin fixation for proximal humeral fractures.

METHODS

42 men and 20 women aged 19 to 94 (mean, 64) years with 2- or 3-part proximal humeral fractures underwent reduction and fixation using the modified Rush pin technique. 11 patients died from reasons unrelated to the surgery.

RESULTS

Of 40 (out of 51) patients completing a subjective functional assessment using an Oxford Shoulder Questionnaire, 28 (70%) had 2-part and 10 (25%) had 3-part displaced fractures, and the remaining 2 (5%) had fracture-dislocations (one being 2-part and one 3-part). 25 (63%) patients were very satisfied (including one with a 3-part fracture after 6 months of rehabilitation), 7 (17%) were moderately satisfied, and 8 (20%) were not satisfied. There were 8 complications, including pin cut-out from the proximal fragment (n=2), proximal pin migration (n=2), distal pin migration (n=1), cortical perforation during surgery (n=1), mild ulnar nerve symptoms (n=1). No patients had non-union, myositis ossificans, avascular necrosis of the humeral head, or axillary nerve injury.

CONCLUSION

The modified Rush pin fixation minimises tissue dissection; the implants are cheap and readily available; and the technical expertise is easily learnt. This technique is a suitable alternative of fixing proximal humeral fractures, especially in the elderly.

Internal fixation of proximal humeral fractures with a Polarus humeral nail

BACKGROUND

Proximal humeral fractures occur frequently. Displaced or unstable fractures require open reduction and internal fixation. Our objective was to investigate the clinical and radiographic results of the internal fixation using Polarus humeral nails for fractures of the proximal humerus.

MATERIALS AND METHODS

From January 2001 to April 2006, 54 shoulders of 54 patients (44 females, 10 males) underwent the intramedullary fixation using Polarus humeral nail. Mean age of the patients was 66-year-old (39-89) at the time of the surgery. Fracture-type by Neer classification was 2-part (29 shoulders), 3-part (22 shoulders) and 4-part (3 shoulders). The clinical and radiological outcomes were evaluated.

RESULTS

All the shoulders after osteosynthesis obtained bone-union. There was no osteonecrosis of the humeral head. Functional outcome measured by JOA score averaged 81 points. Totally 43 patients (79%) had satisfactory to excellent results. Varus deformity was seen in 4 shoulders (8%) and the deformity of the greater tuberosity in 4 (8%).

CONCLUSION

The Polarus intramedullary humeral nail is effective for the treatment of proximal humeral fractures.

Injury to the axillary artery, a complication of fixation using a locking plate

The proximal humerus internal locking system is an internal fixation device consisting of a low-profile plate and locking screws, which is used for the fixation of three- and four-part fractures of the proximal humerus. We describe a case in which the screws cut out of the humeral head causing injury to the axillary artery necessitating urgent removal of the implant.

Treatment of proximal humerus fractures

The majority of proximal humerus fractures are treated nonoperatively with good functional results. Multiple options exist for treating displaced fractures, without a clear advantage of any one method for a given fracture type. Goals include an adequate reduction and stable fixation to initiate early motion and rehabilitation. Decision-making should be based on patient and injury specifics and surgeon's experience. Various types of fixation, including plates, nails, or percutaneous pins, can maintain sufficient stability to promote shoulder mobility and function. Any of these methods will have few complications when undertaken with appropriate patient selection and careful surgical technique. Preliminary results of locking plates in the proximal humerus suggest that this is a favorable treatment option for displaced, comminuted proximal humerus fractures, which compares well with established methods. Locked plating may improve fracture stability in some complex patterns and facilitate early rehabilitation. It is possible that some fractures previously treated with hemiarthroplasty may be managed successfully with locking plates. Prospective study to assess the complications, outcomes, and cost effectiveness of nonoperative management compared to various surgical treatment options is warranted.

Proximal humeral internal locking system (PHILOS) for the treatment of proximal humeral fractures

INTRODUCTION

The aim of this study was to describe early results of a new internal locking system, PHILOS, used for the treatment of proximal humeral fractures.

MATERIALS AND METHODS

A chart and radiographic review of 25 cases that had proximal humeral internal locking system (PHILOS) plate for the treatment of proximal humeral fractures was performed.

RESULTS

Of the 25 cases, 20 went to union with a mean neck/shaft angle of 127.2 degrees . Five cases required or were considered for revision surgery for non-union or implant failure. Of the 25 implants, 4 had screw protrusion into the gleno-humeral joint, 4 had screw loosening and backing out, and 1 plate broke without further trauma.

CONCLUSIONS

Our results suggest that PHILOS is an effective system for providing fracture stabilisation to bony union but awareness of potential hardware complications is essential.

Effectiveness of Locked Nailing for Displaced Three-Part Proximal Humeral Fractures

BACKGROUND

Published reports about locked nailing for displaced comminuted proximal humeral fractures are few and the results contradictory.

METHODS

Locked nailing was used to treat 27 selective patients with displaced three-part proximal humeral fractures. The average age of patients was 54.3 years. The operative indications were persistent severe displacement, intact or minimally displaced lesser tuberosity, tolerance of anesthesia, and adherence to rehabilitation programs. Three patients had associated shoulder dislocation and two had fractures with diaphyseal extension. By transdeltoid approach, the fractures were reduced and then fixed by antegrade nailing with either upward or downward locking screws. The patients were prospectively followed up for an average of 24 months.

RESULTS

All fractures achieved eventual union. Three patients with proximal screw loosening required screw removal. On the basis of Neer criteria, excellent or satisfactory results were obtained in 21 patients whose scores averaged 87.5 points. Six patients had unsatisfactory outcomes, with an average of 75.8 points. Two patients with the complication of avascular necrosis still had a satisfactory outcome. Varus deformity of shoulder joints, deformity of the greater tuberosity, collapse of the humeral head, and old age could adversely affect shoulder elevation. However, the anatomic abnormalities might have limited effects on the pain scale, muscle power, and shoulder stability.

CONCLUSIONS

Locked nailing can be an effective treatment for selected severely displaced three-part proximal humeral fractures. It is particularly useful for fractures with diaphyseal involvement. Familiarity with the fracture deformity and experience with the surgical techniques are critical for successful treatment results.

Fixation of proximal humerus fractures using the PHILOS plate: early experience

Proximal humeral fractures, especially in elderly patients, remain a challenging problem for the surgeon because the complication rate for these fractures still remains high. The internal locked system (PHILOS) plate is a new device used for proximal humerus fracture fixation is designed to decrease the high complication rate. We prospectively evaluated our early experience using this system. Twenty patients with fractures of the proximal humerus were treated with a PHILOS plate from September 2001 to January 2004 at Princess Alexandra Hospital in Harlow, UK. Functional assessment was done using the Constant shoulder score. Two patients who had brachial plexus injury were evaluated only with the visual analogue score because we thought that the Constant objective assessment would be unreliable. Complications were monitored. The mean Constant score was found to be 76.1% (range, 30-100%). The preliminary results seem to be satisfactory. According to our experience, the plate design provides stable fixation with a good functional outcome and eliminates most hardware problems such as failure and impingement syndrome. The PHILOS plate is suitable for the majority of fractures providing that the correct surgical technique is used.

LEVEL OF EVIDENCE

Therapeutic study, level IV (case series). See the Guidelines for Authors for a complete description of levels of evidence.

Locked Plate Fixation and Intramedullary Nailing for Proximal Humerus Fractures: A Biomechanical Evaluation

BACKGROUND

Internal fixation of proximal humeral fractures is associated with a considerable secondary malalignment rate. Fixed-angle implants have been suggested to increase the stability of fixation.

METHODS

The biomechanical properties of four different implants were tested. These included an internal fixator with semi-elastic properties (reference), the Synthes T-plate, a locked plate with rigid properties and a spiral blade locked intramedullary nail (PHN). These implants were assessed in twenty-four osteotomized pairs of human cadaveric humeri. Specimens were subjected to two-hundred cycles of axial loading and torque followed by load to failure.

RESULTS

The PHN had greater axial stiffness than the reference and the T-plate. During torque, all implants were stiffer than the reference. During cyclic loading, there were no differences between the T-plate and the reference. Both the rigid internal fixator and the PHN had less irreversible deformation than the reference. Both implants resisted higher loads before failure.

CONCLUSION

This study showed that the proximal humeral nail and the rigid internal fixator are stronger than the semi-elastic locked plate and the Synthes T-plate for unstable subcapital proximal humeral fractures.

Osteosynthese von Oberarmkopffrakturen

BACKGROUND

Intramedullary nails and angle-fixed plates have recently been used in proximal humerus fractures. Rigid implants might be associated with an increased risk of failure in osteoporotic conditions.

METHODS

Unstable fractures of the surgical neck were created in 24 pairs of human humeri. The biomechanical properties of four implants were analysed. These were a nail with conventional interlocking (PHN-K), a nail with spiral blade interlocking (PHN-S), the T-plate, and an internal fixator with elastic screw properties (reference). The specimens were subjected to axial loading and torque. Stiffness, plastic deformity, and load to failure were assessed.

RESULTS

The PHN-S was stiffer than the internal fixator. The PHN-K and T-plate were stiffer only during torque. Less subsidence was observed for the PHN-S. This implant failed at higher loads than the other implants.

CONCLUSIONS

The PHN-S offers biomechanical advantages in unstable fractures of the surgical neck of the humerus. Elastic implant properties, however, are disadvantageous.

Antegrade interlocking nailing of humeral shaft fractures

The results of 39 humeral shaft fractures (37 patients) treated with antegrade locked nailing using a Russell-Taylor nail were reviewed. There were 30 acute fractures, 6 fractures malaligned in a hanging cast or brace, and 3 pathological fractures. Patient age ranged from 26 to 80 years (average, 59.7 years) and average follow-up was 25.7 months (range, 6-48 months). Fracture union was achieved in 92.3% of our cases, while shoulder function was excellent or good in 87.2% of cases. Antegrade locked nailing offers a dependable solution for the treatment of humeral shaft fractures, especially in polytrauma patients and cases of segmental or pathological fractures. Far less satisfactory results were obtained in comminuted fractures of the proximal third in the humerus, especially in osteoporotic patients, and we therefore advocate caution with the use of intramedullary nailing in this type of fracture. Certain technical aspects such as avoiding nailing the fracture in distraction, properly countersinking the tip of the nail, and achieving adequate fixation stability have been found to be of paramount importance to reduce the incidence of delayed union/non-union rate and to obtain better functional results from the shoulder joint.

Fixation of fractures of the proximal humerus with the PlantTan Humerus Fixator Plate: early experience with a new implant

The majority of fractures of the proximal humerus can be managed nonoperatively. However, displaced fractures generally require operative repair, and in the young patient with good bone quality, the results are usually satisfactory. In contrast, the osteoporosis found in the elderly patient makes internal fixation problematic and frequently contributes to failure of fixation and poor results. We report our early experience with a new plate that locks two humeral head cancellous screws to the plate. In 3 of 7 patients, all under 65 years of age, the results were good. However, in the remaining 4 patients, all over the age of 75 years, there was a 100% failure rate, with screw penetration of the head in 3 patients and secondary displacement of the fracture at 7 days postoperatively in another. We conclude that this implant is unsatisfactory for patients with osteopenic bone in the humeral head.