An XPS and Auger study of some polynuclear copper compounds

Tailoring Cu-SiO2 Interaction through Nanocatalyst Architecture to Assemble Surface Sites for Furfural Aqueous-Phase Hydrogenation to Cycloketones

In this contribution, nanocatalysts with rather diverse architectures were designed to promote different intimacy degrees between Cu and SiO2 and consequently tune distinct Cu-SiO2 interactions. Previously synthesized copper nanoparticles were deposited onto SiO2 (NPCu/SiO2) in contrast to ordinarily prepared supported Cu/SiO2. NPCu@SiO2 and SiO2@Cu core-shell nanocatalysts were also synthesized, and they were all bulk and surface characterized by XRD, TGA, TEM/HRTEM, H2-TPR, XANES, and XPS. It was found that Cu0 is the main copper phase in NPCu/SiO2 while Cu2+ rules the ordinary Cu/SiO2 catalyst, and Cu0 and electron-deficient Cuδ+ species coexist in the core-shell nanocatalysts as a consequence of a deeper metal-support interaction. Catalytic performance could not be associated with the physical properties of the nanocatalysts derived from their architectures but was associated with the more refined chemical characteristics tuned by their design. Cu/SiO2 and NPCu/SiO2 catalysts led to the formation of furfuryl alcohol, evidencing that catalysts holding weak or no metal-support interaction have no significant impact on product distribution even in the aqueous phase. The establishment of such interactions through advanced catalyst architecture, allowing the formation of electron-deficient Cuδ+ moieties, particularly Cu2+ and Cu+ as unveiled by spectroscopic investigations, is critical to promoting the hydrogenation-ring rearrangement cascade mechanism leading to cycloketones.

Fabrication of Cu-MOF-Derived Cu/CuxO/C Bifunctional Materials for Light and Dark Catalytic Properties

Metal-organic frameworks (MOFs) are self-assembled constitutive precursors and efficient self-sacrificial templates with metal ions/clusters and organic linkers from which multifunctional materials with carbon nanostructures can be derived. In this study, we synthesized a novel Cu-MOF with Cu(II) as the central metal ion through two ligands, N,N'-bis(pyridin-3-yl)terephthalamide (3-bpta) and fumaric acid (H2FA), which was used as a template for derivatizing carbon-based nanostructured materials of Cu and CuxO through doping with different materials (melamine, urea, and TiO2) in a simple and efficient one-step pyrolysis. The Cu/CuxO-1 catalyst possesses both dark-catalyzed degradation activity and photocatalytic reduction activity during water purification due to the hole-transfer ability between Cu+ and Cu2+ and its inhibition of electron-hole complexation. In the absence of light, force, and cocatalyst, it can also effectively remove azo dyes in water and effectively reduce Cr(VI) under the action of visible light; therefore, Cu/CuxO-1 can be used as a new type of bifunctional material for the removal of pollutants in water, which has a broad prospect.

Interaction of N-nitrosamines with binuclear copper complexes for luminescent detection

Cu(I) from tetrakis(acetonitrile)copper(I) hexafluorophosphate ([Cu(MeCN)₄]PF₆) was complexed with five structurally related phosphines containing N-heterocycles. The interactions between the resulting complexes and some N-nitrosamines were studied using X-ray crystallography as well as emission spectroscopy. Upon complexation, three phosphine ligands bridge two Cu(I) centers to give paddlewheel type structures that displayed a range of emission wavelengths spanning the visible region. N-Nitrosodimethylamine (NDMA) was shown to coordinate to one of the two copper centers in some of the paddlewheel complexes in the solid state and this interaction also quenches their emissions in solution. The influence of the weakly coordinating anion on crystal and spectroscopic properties of one of the paddlewheel complexes was also examined using tetrakis(acetonitrile)copper(I) perchlorate ([Cu(MeCN)₄]ClO₄) as an alternative Cu(I) source. Similarly, copper(II) perchlorate hexahydrate (Cu(ClO₄)₂·6H₂O) was used for complexation to observe the impact of metal oxidation state on the two aforementioned properties. Lastly, the spectroscopic properties of the complex between Ph₂P(1-Isoquinoline) and Cu(I) was shown to exhibit solvent dependence when the counterion is ClO₄^-. These Cu(I) complexes are bench stable solids and may be useful materials for developing a fluorescence based detection method for N-nitrosamines.

Enhancing the Photocatalytic Degradation Efficiency of Dyes of Copper-Based Metal-Organic Frameworks through a Dimension-Induced Structural Strategy

Photocatalytic degradation of pollutants is an effective environment purification strategy. Metal-organic frameworks (MOFs) have attracted extensive attention in the field of photocatalysis owing to their structural diversity, uniform cavity, and large specific surface area. However, poor electrical conductivity, light absorption, and water stability restrict their development. The tailorable structure of MOFs may effectively overcome these limitations. Herein, three Cu-based MOFs (complexes 1-3) with one-dimensional (1D), two-dimensional (2D), and three-dimensional (3D) structures, respectively, were successfully prepared by introducing different uncoordinated ligands and adjusting the ligand/metal salt ratio. Among them, complex 1 with a 1D chain was constructed as a typical J-type aggregation by π-π stacking interactions between adjacent naphthalene rings. This intermolecular aggregation mode enhances strong exciton coupling between conjugated rings, reduces the transition energy, expands the intrinsic light absorption edge, and provides a channel for electron transport, thus improving the charge-separation efficiency. As expected, complex 1 with a 1D chain structure exhibited excellent Fenton-like catalytic activity. The apparent reaction rates were 3.2 and 2.0 times higher than those of 2D and 3D MOFs, respectively.

Incorporation of an Emissive Cu4I4 Core into Cross-Linked Networks: An Effective Strategy for Luminescent Organic-Inorganic Hybrid Coatings

Here, an effective strategy for the preparation of luminescent organic-inorganic hybrid coatings (OIHCs) by the incorporation of an emissive Cu₄I₄ core into cross-linked coating networks through coordination bonds is reported. The luminescent coatings obtained show potential application in a variety of areas, and such a synthetic strategy of the incorporation of an emissive inorganic core into extended networks has proven to be an efficient method for the synthesis of luminescent OIHCs.

Investigation into the Re-Arrangement of Copper Foams Pre- and Post-CO2 Electrocatalysis

The utilization of carbon dioxide is a major incentive for the growing field of carbon capture. Carbon dioxide could be an abundant building block to generate higher-value chemical products. Herein, we fabricated a porous copper electrode capable of catalyzing the reduction of carbon dioxide into higher-value products, such as ethylene, ethanol and propanol. We investigated the formation of the foams under different conditions, not only analyzing their morphological and crystal structure, but also documenting their performance as a catalyst. In particular, we studied the response of the foams to CO2 electrolysis, including the effect of urea as a potential additive to enhance CO2 catalysis. Before electrolysis, the pristine and urea-modified foam copper electrodes consisted of a mixture of cuboctahedra and dendrites. After 35 min of electrolysis, the cuboctahedra and dendrites underwent structural rearrangement affecting catalysis performance. We found that alterations in the morphology, crystallinity and surface composition of the catalyst were conducive to the deactivation of the copper foams.

Underliquid Superlyophobic Copper-Coated Meshes for the Separation of Immiscible Organic Liquid Mixtures

Superwettable materials have been studied extensively and successfully applied in various forms liquid separation. However, because of low surface tension differences, organic liquids (OLs) exhibit approximate wettability on most of the material surfaces, and the separation of OL mixtures remains a challenge. The current separation method for OL mixtures is mainly dependent on covalent modification to precisely control the surface energy of the membranes, which is extremely complicated. Herein, we demonstrate a novel concept of underliquid superlyophobicity for the separation of immiscible OLs mixtures, which only depend on a relatively stable liquid-repellent interface. Furthermore, the minimum system's free-energy principle was used to explain this wetting behavior. Different from the previous reports, the method of separation of OL mixtures does not involve various low-surface-energy materials, thus it is facile and eco-friendly. Our research provides a general strategy for the efficient separation of immiscible OLs mixtures and is expected to promote the development of superwettable materials for multiphase liquid separation.

Molecular-Level Understanding of Selectively Photocatalytic Degradation of Ammonia via Copper Ferrite/N-Doped Graphene Catalyst under Visible Near-Infrared Irradiation

Developing photocatalysts with molecular recognition function is very interesting and desired for specific applications in the environmental field. Copper ferrite/N-doped graphene (CuFe2O4/NG) hybrid catalyst was synthesized and characterized by surface photovoltage spectroscopy, X-ray powder diffraction, transmission electron microscopy, Raman spectroscopy, UV–Vis near-infrared diffuse reflectance spectroscopy and X-ray photoelectron spectroscopy. The CuFe2O4/NG catalyst can recognize ammonia from rhodamine B (RhB) in ammonia-RhB mixed solution and selectively degrade ammonia under visible near-infrared irradiation. The degradation ratio for ammonia reached 92.6% at 6 h while the degradation ratio for RhB was only 39.3% in a mixed solution containing 100.0 mg/L NH3-N and 50 mg/L RhB. Raman spectra and X-ray photoelectron spectra indicated ammonia adsorbed on CuFe2O4 while RhB was adsorbed on NG. The products of oxidized ammonia were detected by gas chromatography, and results showed that N2 was formed during photocatalytic oxidization. Mechanism studies showed that photo-generated electrons flow to N-doped graphene following the Z-scheme configuration to reduce O2 dissolved in solution, while photo-generated holes oxidize directly ammonia to nitrogen gas.

Anomalous electroless deposition of less noble metals on Cu in ionic liquids and its application towards battery electrodes

Electroless deposition can be triggered by the difference in the redox potentials between two metals in an electrolyte. In aqueous electrochemistry, galvanic displacement takes place according to the electrochemical series wherein a more noble metal can displace a less noble metal. Herein we show anomalous behaviour in ionic liquids wherein less noble metals such as Fe and Sb were deposited on Cu at temperatures from 25 to 60 °C. Fe formed spherical structures whereas Cu₂Sb/Sb formed nanoplates. A multistep process during the electroless deposition of Sb on Cu took place which was discerned from in situ XPS, and mass spectrometry. In situ AFM was also used to understand the nucleation and growth process of the galvanic displacement reaction. Subsequently, the Cu₂Sb/Sb nanoplates were also tested as the anode for both Li-ion and Na-ion batteries. Thus, it is shown that the electrochemistry in ionic liquids significantly differs from aqueous electrolytes and opens up new routes for material synthesis.