Remote ligand substituent effects on the properties of oxo-Mo(V) centers with a single ene-1,2-dithiolate ligand

A reactive coordinatively saturated Mo(iii) complex: exploiting the hemi-lability of tris(tert-butoxy)silanolate ligands

Hemilabile tris(tert-butoxy)silanolate ligands allow stabilizing a mononuclear octahedral Mo(iii) complex without quenching its reactivity towards small molecules (N₂, CO₂, N₂O).

Coordinatively unsaturated Mo(iii) complexes have been identified as highly reactive species able to activate dinitrogen without the need for a sacrificial reducing agent. Here, we report a coordinatively saturated octahedral Mo(iii) complex stabilized by κ²-tris(tert-butoxy)silanolate ligands, which is yet highly reactive towards dinitrogen and small molecules. The combined high stability and activity are ascribed to the dual binding mode of the tris(tert-butoxy)silanolate ligands that allow unlocking a coordination site in the presence of reactive small molecules to promote their activation at low temperatures.

Spectroscopic characterization of YedY: the role of sulfur coordination in a Mo(V) sulfite oxidase family enzyme form

Electronic paramagnetic resonance (EPR), electronic absorption, and magnetic circular dichroism spectroscopies have been performed on YedY, a SUOX fold protein with a Mo domain that is remarkably similar to that found in chicken sulfite oxidase, Arabidopsis thaliana plant sulfite oxidase, and the bacterial sulfite dehydrogenase from Starkeya novella. Low-energy dithiolene --> Mo and cysteine thiolate --> Mo charge-transfer bands have been assigned for the first time in a Mo(V) form of a SUOX fold protein, and the spectroscopic data have been used to interpret the results of bonding calculations. The analysis shows that second coordination sphere effects modulate dithiolene and cysteine sulfur covalency contributions to the Mo bonding scheme. In particular, a more acute O(oxo)-Mo-S(Cys)-C dihedral angle results in increased cysteine thiolate S --> Mo charge transfer and a large g(1) in the EPR spectrum. The spectrosocopic results, coupled with the available structural data, indicate that these second coordination sphere effects may play key roles in modulating the active-site redox potential, facilitating hole superexchange pathways for electron transfer regeneration, and affecting the type of reactions catalyzed by sulfite oxidase family enzymes.

[Mo(TmMe)(O)2Cl]: An Alternative Functional Model of Sulfite Oxidase

The hydrotris(methimazolyl)borate anion (TmMe) has been used to synthesize an alternative functional model ([Mo(TmMe)(O)2Cl]) of the metalloenzyme sulfite oxidase. It has been shown that the complex undergoes oxygen atom transfer chemistry and that it performs the primary function of the enzyme, sulfite oxidation. A method using ion chromatography has been developed to definitively prove that sulfite is oxidized to sulfate. Employment of a soft tripodal ligand has allowed us to tune the redox potentials of our complex so that they are significantly closer to those reported for sulfite oxidase.

Understanding the origin of metal-sulfur vibrations in an oxo-molybdenum dithiolene complex: relevance to sulfite oxidase

X-ray crystallography and resonance Raman (rR) spectroscopy have been used to further characterize (Tp*)MoO(qdt) (Tp* is hydrotris(3,5-dimethyl-1-pyrazolyl)borate and qdt is 2,3-quinoxalinedithiolene), which represents an important benchmark oxomolybdenum mono-dithiolene model system relevant to various pyranopterin Mo enzyme active sites, including sulfite oxidase. The compound (Tp*)MoO(qdt) crystallizes in the triclinic space group, P1, where a = 9.8424 (7) A, b = 11.2323 (8) A, c = 11.9408 (8) A, alpha = 92.7560 (10) degrees, beta = 98.9530 (10) degrees, and gamma = 104.1680 (10) degrees. The (Tp*)MoO(qdt) molecule exhibits the distorted six-coordinate geometry characteristic of related oxo-Mo(V) systems possessing a single coordinated dithiolene ligand. The first coordination sphere bond lengths and angles in (Tp*)MoO(qdt) are very similar to the corresponding structural parameters for (Tp*)MoO(bdt) (bdt is 1,2-benzenedithiolene). The relatively small inner-sphere structural variations observed between (Tp*)MoO(qdt) and (Tp*)MoO(bdt) strongly suggest that geometric effects are not a major contributor to the significant electronic structural differences reported for these two oxo-Mo(V) dithiolenes. Therefore, the large differences observed in the reduction potential and first ionization energy between the two molecules appear to derive primarily from differences in the effective nuclear charges of their respective sulfur donors. However, a subtle perturbation to Mo-S bonding is implied by the nonplanarity of the dithiolene chelate ring, which is defined by the fold angle. This angular distortion (theta = 29.5 degrees in (Tp*)MoO(qdt); 21.3 degrees in (Tp*)MoO(bdt)) observed between the MoS2 and S-C=C-S planes may contribute to the electronic structure of these oxo-Mo dithiolene systems by controlling the extent of S p-Mo d orbital overlap. In enzymes, the fold angle may be dynamically modulated by the pyranopterin, thereby functioning as a transducer of vibrational energy associated with protein conformational changes directly to the active site via changes in the fold angle. This process could effectively mediate charge redistribution at the active site during the course of atom- and electron-transfer processes. The rR spectrum shows bands at 348 and 407 cm(-1). From frequency analysis of the normal modes of the model, [(NH3)3MoO(qdt)]1+, using the Gaussian03 suite of programs, these bands are assigned as mixed-mode Mo-S vibrations of the five-membered Mo-ditholene core structure. Raman spectroscopy has also provided additional evidence for an in-plane pseudo-sigma dithiolene S-Mo d(xy) covalent bonding interaction in (Tp*)MoO(qdt) and related oxo-Mo-dithiolenes that has implications for electron-transfer regeneration of the active site in sulfite oxidase involving the pyranopterin dithiolene.

Investigation of activated carbon surface heterogeneity by argon and nitrogen low-pressure quasi-equilibrium volumetry

Surface heterogeneity can be assessed by adsorption of different gaseous probes on solid materials. In the present study, four types of activated carbons were analyzed by classical N2 Brunauer-Emmett-Teller (BET) measurements and by low-pressure quasi-equilibrium volumetry (LPQEV) (Villieras, F.; Michot, L. J.; Bardot, F.; Cases, J. M.; Francois, M.; Rudzinski, W. Langmuir 1997, 13, 1104). Three methods of data evaluation were applied: (a) the Frenkel-Halsey-Hill method for estimation of fractal dimensions from BET data, (b) the Horwath-Kawazoe method to calculate the pore size distribution from LPQEV Ar and N2 adsorption isotherms, and (c) the derivative isotherm summation (DIS) method to describe the solid's surface heterogeneity by a concept of local derivative isotherms. Similar Ar and N2 adsorption energy distributions were obtained on all carbons, which indicates the presence of mainly nonpolar surfaces. When adsorption was described by the van der Waals equation, the ratio between the interaction energy of different energetic sites with argon and nitrogen was 0.88. This value corresponded very well with a slope obtained when Ar and N2 positions of local isotherms by the DIS method were compared. This relationship has an important impact because it enables one to constrain the modeling of local isotherms. This study, besides the surface information, showed large possibilities of the DIS method for the surface analysis not only in terms of solid heterogeneity characterization but also in terms of polarity assessment.

Synthesis and characterisation of second-generation metallodithiolene complexes of the type [Tp*ME(dithiolene)](M = Mo, W; E = O, S) and a novel ‘organoscorpionate’ complex of tungsten

Paramagnetic, chalcogenido-M(v) dithiolene complexes, [Tp*ME{S2C2(CO2Me)2}][M=Mo, E=O, S; M=W, E=O, S; Tp*=hydrotris(3,5-dimethylpyrazol-1-yl)borate] are generated in the reactions of dimethyl acetylenedicarboxylate (DMAC) and the sulfur-rich complexes NEt4[Tp*MoS(S4)] and NEt4[Tp*WS3]; the oxo complexes result from hydrolysis of the initial sulfido products. As well, a novel 'organoscorpionate' complex, [W{S2C2(CO2Me)2}{SC2(CO2Me)2-Tp*}], has been isolated from the reactions of NEt4[Tp*WS3] with excess DMAC. Complexes , and have been isolated and characterised by microanalytical, mass spectrometric, spectroscopic and (for and) X-ray crystallographic techniques. Complexes and have been partially characterised by mass spectrometry and IR and EPR spectroscopy. Six-coordinate, distorted-octahedral contains a terminal sulfido ligand (W=S=2.108(3)A), a bidentate dithiolene ligand (S-Cav=1.758 A, C=C=1.332(10)A) and a fac-tridentate Tp* ligand. Seven-coordinate contains a planar, bidentate dithiolene ligand (S-Cav=1.746 A, C=C=1.359(5)A) and a novel pentadentate 'organoscorpionate' ligand formed by the melding of DMAC, sulfido and trispyrazolylborate units. The latter is coordinated through two pyrazolyl N atoms (kappa2-N,N') and a tridentate kappa3-S,C,C' unit appended to N-beta of the third (uncoordinated) pyrazolyl group. The second-generation [Tp*ME(dithiolene)] complexes represent a refinement on first-generation [Tp*ME(arene-1,2-dithiolate)] complexes and their synthesis affords an opportunity to compare and contrast the electronic structures of true vs. pseudo-dithiolene ligands in otherwise analogous complexes.

Electronic Structure of Bent Titanocene Complexes with Chelated Dithiolate Ligands

Gas-phase photoelectron spectroscopy and density functional theory have been utilized to investigate the interactions between the p orbitals of dithiolate ligands and d orbitals of titanium in bent titanocene complexes as minimum molecular models of active site features of pyranopterin Mo/W enzymes. The compounds Cp(2)Ti(S-S) [where (S-S) is 1,2-ethenedithiolate (S(2)C(2)H(2)), 1, 1,2-benzenedithiolate (bdt), 2, or 1,3-propanedithiolate (pdt), 3, and Cp(-) is cyclopentadienyl] provide access to a formal 16-electron d(0) electronic configuration at the metal. A "dithiolate-folding-effect" involving an interaction of metal and sulfur orbitals is demonstrated in complexes with arene- and enedithiolates. This effect is not observed for the alkanedithiolate in complex 3.

Investigation of metal-dithiolate fold angle effects: implications for molybdenum and tungsten enzymes

Gas-phase photoelectron spectroscopy and density functional theory have been used to investigate the interactions between the sulfur pi-orbitals of arene dithiolates and high-valent transition metals as minimum molecular models of the active site features of pyranopterin MoW enzymes. The compounds (Tp*)MoO(bdt) (compound 1), Cp(2)Mo(bdt) (compound 2), and Cp(2)Ti(bdt) (compound 3) [where Tp* is hydrotris(3,5-dimethyl-1-pyrazolyl)borate, bdt is 1,2-benzenedithiolate, and Cp is eta(5)- cyclopentadienyl] provide access to three different electronic configurations of the metal, formally d(1), d(2), and d(0), respectively. The gas-phase photoelectron spectra show that ionizations from occupied metal and sulfur based valence orbitals are more clearly observed in compounds 2 and 3 than in compound 1. The observed ionization energies and characters compare very well with those calculated by density functional theory. A "dithiolate-folding-effect" involving an interaction of the metal in-plane and sulfur-pi orbitals is proposed to be a factor in the electron transfer reactions that regenerate the active sites of molybdenum and tungsten enzymes.

New oxovanadium bis(1,2-dithiolate) compounds that mimic the hydrogen-bonding interactions at the active sites of mononuclear molybdenum enzymes

Reaction of VO(acac)(2) with 1,2-dithiols in the presence of triethylamine gives pentacoordinate oxovanadium complexes [HNEt(3)](2)[VO(bdt)(2)] (1), [HNEt(3)](2)[VO(tdt)(2)] (2), and [HNEt(3)](2)[VO(bdtCl(2))(2)] (3) (where H(2)bdt = 1,2-benzenedithiol, H(2)tdt = 3,4-toluenedithiol, and H(2)bdtCl(2) = 3,6-dichloro-1,2-benzenedithiol). Compounds 1-3 have been characterized by IR, UV/visible, EPR, and mass spectroscopies. The X-ray crystal stuctures of 1 and 2 show hydrogen-bonding interactions between the terminal oxo atom and triethylammonium counterions and between ligand sulfur atoms and the counterions. These interactions are comparable with those found at the active sites of mononuclear molybdenum enzymes.

Probing the electronic structure of [MoOS(4)](-) centers using anionic photoelectron spectroscopy

Using photodetachment photoelectron spectroscopy (PES) in the gas phase, we investigated the electronic structure and chemical bonding of six anionic [Mo(V)O](3+) complexes, [MoOX(4)](-) (where X = Cl (1), SPh (2), and SPh-p-Cl (3)), [MoO(edt)(2)](-) (4), [MoO(bdt)(2)](-) (5), and [MoO(bdtCl(2))(2)](-) (6) (where edt = ethane-1,2-dithiolate, bdt = benzene-1,2-dithiolate, and bdtCl(2) = 3,6-dichlorobenzene-1,2-dithiolate). The gas-phase PES data revealed a wealth of new electronic structure information about the [Mo(V)O](3+) complexes. The energy separations between the highest occupied molecular orbital (HOMO) and HOMO-1 were observed to be dependent on the O-Mo-S-C(alpha) dihedral angles and ligand types, being relatively large for the monodentate ligands, 1.32 eV for Cl and 0.78 eV for SPh and SPhCl, compared to those of the bidentate dithiolate complexes, 0.47 eV for edt and 0.44 eV for bdt and bdtCl(2). The threshold PES feature in all six species is shown to have the same origin and is due to detaching the single unpaired electron in the HOMO, mainly of Mo 4d character. This result is consistent with previous theoretical calculations and is verified by comparison with the PES spectra of two d(0) complexes, [VO(bdt)(2)](-) and [VO(bdtCl(2))(2)](-). The observed PES features are interpreted on the basis of theoretical calculations and previous spectroscopic studies in the condensed phase.