Kinetics of the reactions of divalent copper, zinc, cobalt, and nickel with a deformed water soluble centrally monoprotic porphyrin

Kinetics and mechanism of formation of nickel(II)porphyrin and its interaction with DNA in aqueous medium

Kinetics between 5,10,15,20-tetrakis(N-methylpyridium-4-yl)porphyrin and Ni²⁺ species were investigated in aqueous solution at 25 ±1 °C in I = 0.10 M (NaNO₃). Speciation of Ni²⁺ was done in I = 0.10 M (NaNO₃) for knowing distribution of Ni²⁺ species with solution pH. Experimental data were compared with speciation diagram constructed from the values of hydrolysis constants of Ni²⁺ ion. Speciation data showed that hexaaquanickel(II) ions took place in hydrolysis reactions through formation of [Ni(OH₂)_6-n(OH)_n]^2-n species with solution pH. According to speciation of Ni²⁺ and pH dependent rate constants, rate expression can be written as: d[Ni(TMPyP)⁴⁺]/dt = (k₁[Ni²⁺_(aq)] + k₂[Ni(OH)⁺_(aq)] + k₃[Ni(OH)₂^o_(aq)] + k₄[Ni(OH)₃^-_(aq)])[H₂TMPyP⁴⁺], where k₁, k₂, k₃ and k₄ were found to be k₁ = (0.62 ± 0.22) × 10^-2; k₂ = (3.60 ± 0.40) × 10^-2; k₃ = (2.09 ± 0.52) × 10^-2, k₄ = (0.53 ± 0.04) × 10^-2 M^-1s^-1 at 25 ±1 °C, respectively. Formation of hydrogen bonding between [Ni(H₂O)₅(OH)]⁺ and [H₂TMPyP]⁴⁺ causes enhanced reactivity. Rate of formation of [Ni(II)TMPyP]⁴⁺ complex was to be 3.99 × 10^-2 M^-1s^-1 in I = 0.10 M, NaNO₃ (25 ± 1 °C). UV-Vis and fluorescence data suggested that [Ni(II)TMPyP]⁴⁺ and [H₂(TMPyP)]⁴⁺ interact with DNA via outside binding with self-stacking and intercalation, respectively.

SYNOPSIS

Linear and nonlinear optical properties of human hemoglobin

In this study, we investigated the possibility of interactions between the solvent molecules with the Heme group in the human hemoglobin. The results of this study answer a key question: whether the interactions of the Heme unit with its surroundings are interdependent or independent of the protein units of human hemoglobin. Contributions of the intermolecular interactions were determined by exploiting the solvatochromism spectroscopic data by Kamlet-Taft (KAT) polarity functions. Solvent polarity effects on the nonlinear properties of the Heme's groups in the human hemoglobin (Hb) were investigated via the Z-scan method. The experimental results obtained with spectroscopic and nonlinear optical parameters (absorption coefficient and refractive index) show that the mechanism of solvation and the interactions of Heme are controlled by suitable configuration of the protein units of hemoglobin. In other words, interactions of the Heme with α- and β-globins are an effective factor in controlling the optical behavior of Heme.

Tailored porphyrin–gold nanoparticles for biomedical applications

In this review we present an updated survey of the main synthesis methods of gold nanoparticles (AuNPs) in order to obtain various tailored nanosystems for biomedical imaging. The synthesis approach significantly impacts on the AuNPs properties such as surface chemistry, biocompatibility and cytotoxicity. In recent years, nanomedicine emphasized the development of functionalized AuNPs for biomedical imaging. AuNPs are a good option for used as delivery photosensitizer agents for PDT of cancer. For example, the complex formed from AuNPs functionalized with PEGylate porphyrins presents several advantages in the medical field such as a better use in photodynamic therapy because of high triplet states and singlet oxygen quantum yield efficiency of porphyrin molecules.

Improved Optical and Morphological Properties of Vinyl-Substituted Hybrid Silica Materials Incorporating a Zn-Metalloporphyrin

This work is focused on a novel class of hybrid materials exhibiting enhanced optical properties and high surface areas that combine the morphology offered by the vinyl substituted silica host, and the excellent absorption and emission properties of 5,10,15,20-tetrakis(N-methyl-4-pyridyl)porphyrin-Zn(II) tetrachloride as a water soluble guest molecule. In order to optimize the synthesis procedure and the performance of the immobilized porphyrin, silica precursor mixtures of different compositions were used. To achieve the requirements regarding the hydrophobicity and the porous structure of the gels for the successful incorporation of porphyrin, the content of vinyltriacetoxysilane was systematically changed and thoroughly investigated. Substitution of the silica gels with organic groups is a viable way to provide new properties to the support. An exhaustive characterization of the synthesized silica samples was realised by complementary physicochemical methods, such as infrared spectroscopy (FT-IR), absorption spectroscopy (UV-Vis) and photoluminescence, nuclear magnetic resonance spectroscopy (²⁹Si-MAS-NMR) transmission and scanning electron microscopy (TEM and SEM), nitrogen absorption (BET), contact angle (CA), small angle X ray and neutron scattering (SAXS and SANS). All hybrids showed an increase in emission intensity in the wide region from 575 to 725 nm (Q bands) in comparison with bare porphyrin. By simply tuning the vinyltriacetoxysilane content, the hydrophilic/hydrophobic profile of the hybrid materials was changed, while maintaining a high surface area. Good control of hydrophobicity is important to enhance properties such as dispersion, stability behaviour, and resistance to water, in order to achieve highly dispersible systems in water for biomedical applications.

Spin states of Mn(III) meso-tetraphenylporphyrin chloride assessed by density functional methods

The present work assessed several exchange-correlation functionals (including GGA, meta-GGA and hybrid functionals), in combination with a variety of basis sets and effective core potentials (ECP) for their ability to predict the ground spin state of Mn(III) meso-tetraphenylporphyrin chloride complex, labeled Mn(III)TPPCl, for which experimental data support the quintet high spin state. Geometry optimization of Mn(III)TPPCl was performed for three possible spin states (singlet state, LS; triplet state, IS; and quintet state, HS) at the TPSSh level using the LANL2DZ ECP for Mn and the 6-311G(d) basis set for C, N, Cl and H. Afterwards, single-point energy calculations were conducted by applying 18 exchange-correlation functionals (BLYP, B3LYP, PW91, BPW91, BP86, OLYP, OPBE, OPW91, O3LYP, PBE0, PBEh1PBE, HSEH1PBE, TPSS, TPSSh, M06 L, M06, M062X and M06HF). The influence of the basis set for the metal center was assessed using a smaller group of functionals and varying between the Pople basis set 6-31G(d), its newer formulation m6-31G(d) and the larger Def2-QZVP basis set. All functionals in combination with Pople basis sets predict the quintet state as the ground spin state. In addition, the BLYP, BP86, BPW91, PW91, PBEh1PBE, TPSS and TPSSh functionals predicted the IS lying at most ~60 kJ mol^-1 above the HS, which agrees with the reference data. Results including Def2-QZVP basis set were inconsistent, since only BLYP and B3LYP predict HS as the ground spin state. The recommended methodology for the treatment of such systems seems to be exchange-correlations functionals with few or none Hartree-Fock exchange and modest size basis sets. Graphical Abstract MnTPPCl molecule and the energy ordering of its spin states assessed by 18 functionals.

Factors controlling the reactivity of divalent metal ions towards pheophytin a

In this study, we evaluate the factors which determine the reactivity of divalent metal ions in the spontaneous formation of metallochlorophylls, using experimental and computational approaches. Kinetic studies were carried out using pheophytin a in reactions with various divalent metal ions combined with non- or weakly-coordinative counter ions in a series of organic solvents. To obtain detailed insights into the solvent effect, the metalations with the whole set of cations were investigated in three solvents and with Zn²⁺ in seven solvents. The reactions were monitored using electronic absorption spectroscopy and the stopped-flow technique. DFT calculations were employed to shed light on the role of solvent in activating the metal ions towards porphyrinoids. This experimental and computational analysis gives detailed information regarding how the solvent and the counter ion assist/hinder the metalation reaction as activators/inhibitors. The metalation course is dictated to a large extent by the reaction medium, via either the activation or deactivation of the incoming metal ion. The solvent may affect the metalation in several ways, mainly via H-bonding with pyrrolenine nitrogens and the activation/deactivation of the incoming cation. It also seems to affect the activation enthalpy by causing slight conformational changes in the macrocyclic ligand. These new mechanistic insights contribute to a better understanding of the “metal–counterion–solvent” interplay in the metalation of porphyrinoids. In addition, they are highly relevant to the mechanisms of metalation reactions catalyzed by chelatases and explain the differences between the insertion of Mg²⁺ and other divalent cations.

Equilibrium studies on lithium(I) transfer into ionic liquid with a water-soluble octabromoporphyrin (H2(OBTMPyP)4+) from aqueous phase

A water-soluble octabromoporphyrin 2,3,7,8,12,13,17,18-octabromo-5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin (H2(OBTMPyP)4+), H2P4+) and its lithium complex, Li(OBTMPyP)3+ , (LiP3+) , transferred quantitatively to an ionic liquid (IL), 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM+PF6-) with no addition of other counter ions. The acid-dissociation constants of H2(OBTMPyP)4+ between aqueous and BMIM+PF6- phases were determined spectrophotometrically and found to be 10-7.67 and 10-11.33 at I = 0.1 for K a1,IL = [H+]aq[HP3+]IL/[H2P4+]IL and K a2,IL = [H+]aq[P2+]IL/[HP3+]IL , respectively. Since the acid-dissociation constants involve the partition of H2(OBTMPyP)4+ between aqueous and IL phases, the determined values are ten times as low as those observed in aqueous solution. The transfer equilibrium constants of LiP3+ and NaP3+ to IL defined by K MP,IL = [MP3+]IL/[M+]aq[P2+]IL (M = Li+ or Na+) were found to be 104.83 and 101.31 for K LiP,IL and KNaP,IL , respectively. LiP3+ transferred selectively in the presence of Na+ (K LiP,IL /K NaP,IL = 103.52) to IL phase through an ion-exchange mechanism between BMIM+PF6- and Li(OBTMPyP)3+ .

Direct measurement of equilibrium constants for water-soluble porphyrin with copper(II) and cobalt(II) by differential pulse anodic stripping voltammetry (DPASV)

Because of high stability constants and slow metalation rate of porphyrins, it is difficult to determine stability constants of metalloporphyrins correctly. We propose here a new method for the determination of the stability constant of Cu(II) or Co(II) with 2,3,7,8,12,13,17,18-octabromo-5,10,15,20-tetrakis(N-methylpyridinium-4-yl)porphyrin, H2(OBTMPyP(4))4+ , by differential pulse anodic stripping voltammetry (DPASV) using a gold working electrode. The concentrations of free Cu(II) or Co(II) ion as low as 10-7–10-8 M were determined directly in equilibrium with H2(OBTMPyP(4))4+ of 10-7–10-8 M under optimum DPSAV conditions of rotating disk gold electrode, deposition of metals, stripping of metals, potential pulse amplitude and pulse width. Furthermore effects of supporting electrolytes, time for the attainment of chemical equilibrium and determination methods (standard addition and calibration curve methods) of total free metal ions were considered. Tetramethylammonium chloride, (CH3)4N+Cl-(TMAC) , showed the lowest detection limit of metals among other electrolytes such as Na2SO4 , NaNO3 , NaCl : 0.5 ppb for Cu(II) at I = 0.1 ((CH3)4N+Cl-) . The stability constants of K s defined as M2+ + P2- = MP ( M = Cu(II) and Co(II) , and H2P = H2(OBTMPyP(4))4+ ) were 1013.93 and 109.47 M-1 for Cu(II) and Co(II) , respectively, at I = 0.1 (CH3)4N+Cl-) and 25 °C. The working electrode was also electrochemically activated at higher potential affording to lower detection limit of metal ions as well as to measure cyclic voltammetry of metal ions, porphyrin and metalloporphyrin as low as 10-5 M. The values of E ap (vs. Ag/AgCl ) of Cu2+ , H2(OBTMPyP(4))4+ and Cu(OBTMPyP(4))4+ were 345, 338 and 425, respectively.

β-Pyrrole brominated meso-tetraphenylporphyrins: synthesis, spectral and electrochemical properties

The synthesis, catalytic properties, UV-visible spectra and electrochemistry of β-pyrrole brominated porphyrins are summarized in this brief review. The effect of the Br substituents of the porphyrin ring on the redox behavior, and on axial CO or pyridine binding to the porphyrins is also discussed.

Structural and electronic effects in the metalation of porphyrinoids. Theory and experiment

The structure-reactivity relationships in metalation reactions of porphyrinoids have been studied using experimental and theoretical methods. A series of eight porphyrinoic ligands, derivatives of chlorophylls, was prepared in which both the peripheral groups and the degrees of saturation of the macrocycle were systematically varied. To reveal the solvent and structural factors which control the interactions of these macroligands with metal centers, their interactions with reactive Zn(2+) and inert Pt(2+) ions were investigated using absorption spectroscopy. In parallel, quantum chemical calculations (density functional theory, DFT) were performed for the same set of molecules to examine the influence of structural and electronic factors on the energy of the frontier orbitals, the nucleophilicity/electronegativity of the macrocycle, its hardness, and conformation. These static descriptors of chemical reactivity, relevant to metalation reactions, were verified against the results obtained in the experimental model. The experimentally obtained kinetic data clearly show that the solvent has a crucial role in the activation of the incoming metal center. In terms of chelator structure, the largest effects concern the size of the delocalized pi-electron system and the presence of side groups. Both the DFT calculations and experimental results show the strong influence of the macrocycle rigidity and of the peripheral groups on the chelating ability of porphyrinoids. In particular, the peripheral functionalization of the macrocyclic system seems to drastically reduce its reactivity toward metal ions. The effect of peripheral groups is two-fold: (i) a lower electron density on the core nitrogens, and (ii) increased rigidity of the macrocycle. The outcomes of the theoretical and experimental analyses are discussed also in terms of their relevance to the mechanism of biological metal insertion in the biosynthesis of heme and chlorophyll.

Partially and fully β-brominated Mn-porphyrins in P450 biomimetic systems: Effects of the degree of bromination on electrochemical and catalytic properties

Beta-hexabromo-5,10,15,20-tetrakis(4-carbomethoxyphenyl)porphyrinatomanganese(III) chloride (Mn(III)(Br6TCMPP)Cl) was prepared by selective Br2-hexabromation of its parent non-brominated manganese complex (Mn(III)(TCMPP)Cl), whereas the octabrominated analogue beta-octabromo-5,10,15,20-tetrakis(4-carbomethoxyphenyl)porphyrinatomanganese(III) chloride (Mn(III)(Br8TCMPP)Cl) was synthesized via metallation of the corresponding free-base. Beta-octabromo-5,10,15,20-tetrakis(4-carbomethoxyphenyl)porphyrin was obtained by demetallation of its brominated Cu(II) derivative, which, in its turn, was prepared by either a Br2 or an N-bromosuccinimide protocol. Relative to Mn(III)(TCMPP)Cl (E(1/2) = -0.16 V vs. normal hydrogen electrode, CH2Cl2), the Mn(III)/Mn(II) reduction potential of Mn(III)(Br8TCMPP)Cl and Mn(III)(Br6TCMPP)Cl showed anodic shifts of 0.43 and 0.33 V, respectively, which corresponded to a linear shift of 0.05 V per bromine added. These manganese complexes were evaluated as cytochrome P450 mimics in catalytic iodosylbenzene (PhIO)-oxidations of cyclohexane and cyclohexene. In aerobic PhIO-oxidation of cyclohexene, epoxidation and allylic autoxidation reactions were inversely related, competitive processes; the most efficient P450-mimics were the least effective autoxidation catalysts. Mn(III)(Br6TCMPP)Cl was more efficient as epoxidation or hydroxylation catalyst than both its fully and non-beta-brominated counterparts were. There was no linear relationship between the catalytic efficiency and both the number of bromine substituents and the Mn(III)/Mn(II) potential; these observations were compared to Lyons system literature data and discussed. Analogously to enzymatic optimum pH effects, an optimum redox potential effect is suggested as relevant in designing and understanding cytochrome P450 biomimetic catalysts.

Photophysics and photochemistry of water-soluble, sitting-atop bis-thallium(i) 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin

In aqueous solutions, thallium(I) ions and 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin form a kinetically labile metalloporphyrin of 2 : 1 composition (Tl(2)P(4-)). The formation constant of this sitting-atop (SAT) complex is relatively low (beta2/[H+]2= 3.55 x 10(3) M(-2) at pH = 7), due to the large size and rather small charge of Tl+. As a consequence of the considerably weak metal-ligand interaction in this system, the 1 : 1 species does not appear in detectable concentration. Both the absorption and the emission properties of the Tl(2)P(4-) complex are characteristic for the typical SAT metalloporphyrins. Compared to the corresponding values of the free-base porphyrin, the diminished fluorescence quantum efficiency (Qfl= 0.0131 vs. 0.056) of Tl(2)P(4-) can be accounted for by the heavy-atom effect, while the larger Stokes shift (442 vs. 282 cm(-1)) indicates a stronger distortion of the ligand plane. Both Soret- and Q-band irradiations of the Tl(2)P(4-) complex lead to the degradation of the porphyrin with quantum yields of magnitude 3 x 10(-4). The primary photochemical step in this process is ligand-to-metal charge transfer reaction, which is unusual for normal (coplanar) metalloporphyrins. In the case of SAT complexes, the kinetic lability facilitates the separation of the primary redox products, followed by an irreversible ring-opening of the oxidized porphyrin. Photoinduced electron ejection as a considerable step in the degradation mechanism could be ruled out.