Direct electrochemical studies of cytochromes b562

Methodologies for "Wiring" Redox Proteins/Enzymes to Electrode Surfaces

The immobilization of redox proteins or enzymes onto conductive surfaces has application in the analysis of biological processes, the fabrication of biosensors, and in the development of green technologies and biochemical synthetic approaches. This review evaluates the methods through which redox proteins can be attached to electrode surfaces in a "wired" configuration, that is, one that facilitates direct electron transfer. The feasibility of simple electroactive adsorption onto a range of electrode surfaces is illustrated, with a highlight on the recent advances that have been achieved in biotechnological device construction using carbon materials and metal oxides. The covalent crosslinking strategies commonly used for the modification and biofunctionalization of electrode surfaces are also evaluated. Recent innovations in harnessing chemical biology methods for electrically wiring redox biology to surfaces are emphasized.

Domain-swapped cytochrome cb562 dimer and its nanocage encapsulating a Zn-SO4 cluster in the internal cavity

Three domain-swapped cytochrome cb₅₆₂ dimers formed a unique cage structure with a Zn–SO₄ cluster inside the cavity.

Protein nanostructures have been gaining in interest, along with developments in new methods for construction of novel nanostructures. We have previously shown that c-type cytochromes and myoglobin form oligomers by domain swapping. Herein, we show that a four-helix bundle protein cyt cb₅₆₂, with the cyt b₅₆₂ heme attached to the protein moiety by two Cys residues insertion, forms a domain-swapped dimer. Dimeric cyt cb₅₆₂ did not dissociate to monomers at 4 °C, whereas dimeric cyt b₅₆₂ dissociated under the same conditions, showing that heme attachment to the protein moiety stabilizes the domain-swapped structure. According to X-ray crystallographic analysis of dimeric cyt cb₅₆₂, the two helices in the N-terminal region of one protomer interacted with the other two helices in the C-terminal region of the other protomer, where Lys51–Asp54 served as a hinge loop. The heme coordination structure of the dimer was similar to that of the monomer. In the crystal, three domain-swapped cyt cb₅₆₂ dimers formed a unique cage structure with a Zn–SO₄ cluster inside the cavity. The Zn–SO₄ cluster consisted of fifteen Zn²⁺ and seven SO₄^2– ions, whereas six additional Zn²⁺ ions were detected inside the cavity. The cage structure was stabilized by coordination of the amino acid side chains of the dimers to the Zn²⁺ ions and connection of two four-helix bundle units through the conformation-adjustable hinge loop. These results show that domain swapping can be applied in the construction of unique protein nanostructures.

Redox tuning of cytochrome b562 through facile metal porphyrin substitution

The biologically and nanotechnologically important heme protein cytochrome b(562) was reconstructed with zinc and copper porphyrins, leading to significant changes in the spectral, redox and electron transfer properties. The Cu form shifts the redox potential by +300 mV and exhibits high electron transfer, while the Zn form is redox inert.

Fast electron transfer through a single molecule natively structured redox protein

The electron transfer properties of proteins are normally measured as molecularly averaged ensembles. Through these and related measurements, proteins are widely regarded as macroscopically insulating materials. Using scanning tunnelling microscopy (STM), we present new measurements of the conductance through single-molecules of the electron transfer protein cytochrome b(562) in its native conformation, under pseudo-physiological conditions. This is achieved by thiol (SH) linker pairs at opposite ends of the molecule through protein engineering, resulting in defined covalent contact between a gold surface and a platinum-iridium STM tip. Two different orientations of the linkers were examined: a long-axis configuration (SH-LA) and a short-axis configuration (SH-SA). In each case, the molecular conductance could be 'gated' through electrochemical control of the heme redox state. Reproducible and remarkably high conductance was observed in this relatively complex electron transfer system, with single-molecule conductance values peaking around 18 nS and 12 nS for the SH-SA and SH-LA cytochrome b(562) molecules near zero electrochemical overpotential. This strongly points to the important role of the heme co-factor bound to the natively structured protein. We suggest that the two-step model of protein electron transfer in the STM geometry requires a multi-electron transfer to explain such a high conductance. The model also yields a low value for the reorganisation energy, implying that solvent reorganisation is largely absent.

Direct binding of a redox protein for single-molecule electron transfer measurements

An electron transfer protein is engineered with two thiol groups introduced at different positions in the molecular structure to allow robust binding to two gold electrodes. Atomic force microscopy and scanning tunneling microscopy single-molecule studies show that the engineered proteins: (1) bind to a gold electrode in defined orientation dictated by the thiol-pair utilised, and (2) have a higher conductance than the wild-type proteins indicating a more efficient electron transmission due to the strong gold-thiol contacts.

Single-molecule mapping of long-range electron transport for a cytochrome b(562) variant

Cytochrome b(562) was engineered to introduce a cysteine residue at a surface-exposed position to facilitate direct self-assembly on a Au(111) surface. The confined protein exhibited reversible and fast electron exchange with a gold substrate over a distance of 20 Å between the heme redox center and the gold surface, a clear indication that a long-range electron-transfer pathway is established. Electrochemical scanning tunneling microscopy was used to map electron transport features of the protein at the single-molecule level. Tunneling resonance was directly imaged and apparent molecular conductance was measured, which both show strong redox-gated effects. This study has addressed the first case of heme proteins and offered new perspectives in single-molecule bioelectronics.

Stability and folding kinetics of structurally characterized cytochrome c-b562

The four-helix-bundle protein fold can be constructed from a wide variety of primary amino acid sequences. Proteins with this structure are excellent candidates for investigations of the relationship between folding mechanism and topology. The folding of cytochrome b(562), a four-helix-bundle heme protein, is hampered by heme dissociation. To overcome this complication, we have engineered a variant of cytochrome b(562) (cyt c-b(562)) featuring a c-type linkage between the heme and the polypeptide chain. The replacement of the native cyt b(562) leader sequence in this protein with that of a c-type cytochrome (cyt c(556)) led to high yields of fully matured and correctly folded cyt c-b(562). We have determined the X-ray crystal structure of cyt c-b(562) at 2.25 A and characterized its physical, chemical, and folding properties. These measurements reveal that the c-type linkage does not perturb the protein fold or reduction potential of the heme group. The covalent attachment of the porphyrin to the polypeptide does, however, produce a substantial change in protein stability and folding kinetics.

Electrochemical and ligand binding studies of a de novo heme protein

Heme proteins can perform a variety of electrochemical functions. While natural heme proteins carry out particular functions selected by biological evolution, artificial heme proteins, in principle, can be tailored to suit specified technological applications. Here we describe initial characterization of the electrochemical properties of a de novo heme protein, S824C. Protein S824C is a four-helix bundle derived from a library of sequences that was designed by binary patterning of polar and nonpolar amino acids. Protein S824C was immobilized on a gold electrode and the formal potential of heme-protein complex was studied as a function of pH and ionic strength. The binding of exogenous N-donor ligands to heme/S824C was monitored by measuring shifts in the potential that occurred upon addition of various concentrations of imidazole or pyridine derivatives. The response of heme/S824C to these ligands was then compared to the response of isolated heme (without protein) to the same ligands. The observed shifts in potential depended on both the concentration and the structure of the added ligand. Small changes in structure of the ligand (e.g. pyridine versus 2-amino pyridine) produced significant shifts in the potential of the heme-protein. The observed shifts correlate to the differential binding of the N-donor molecules to the oxidized and reduced states of the heme. Further, it was observed that the electrochemical response of the buried heme in heme/S824C differed significantly from that of isolated heme. These studies demonstrate that the structure of the de novo protein modulates the binding of N-donor ligands to heme.

Direct electrochemistry of engineered cytochrome b562 molecules with a ligand binding pocket

The rapid and reversible electron transfer reaction of cytochrome b562 was observed at an In2O3 electrode. The estimated heterogeneous electron transfer rate constant (k0') was k0' > or = 5.0 x 10(-3) cm s(-1) at pH 6.5. When the methionine-7 (Met-7) residue, which coordinates to the heme iron as an axial ligand, of the wild-type cytochrome b562 was replaced by an Ala or Gly residue, a water molecule bound to the heme iron and the electron transfer rate constants decreased to 1.3 x 10(-3) and 1.8 x 10(-3) cm s(-1), respectively. This decrease in the electron transfer rate would be due to the larger reorganization energy for the structural change at the redox site. The midpoint potential of cytochrome b562 was shifted negatively by approximately 135 mV by replacing Met-7 with Ala or Gly. Similar dissociation kinetics of cyanide for the mutated molecules as compared to native myoglobin was obtained.

Conversion of the Escherichia coli cytochrome b562 to an archetype cytochrome b: a mutant with bis-histidine ligation of heme iron

A mutant of the Escherichia coli cytochrome b(562) has been created in which the heme-ligating methionine (Met) at position 7 has been replaced with a histidine (His) (M7H). This protein is a double mutant that also has the His 63 to asparagine (H63N) mutation, which removes a solvent-exposed His. While the H63N mutation has no measurable effect on the cytochrome, the M7H mutation converts the atypical His/Met heme ligation in cytochrome b(562) to the classic cytochrome b-type bis-His ligation. This mutation has little effect on the K(d) of heme binding but significantly reduces the chemical and thermal stability of the mutant cytochrome relative to the wild type (wt). Both proteins have similar absorbance (Abs) and electron paramagnetic resonance (EPR) properties characteristic of 6-coordinate low-spin heme. The Abs spectra of the oxidized and reduced bis-His cytochrome are slightly blue-shifted relative to the wt, and the alpha Abs band of ferrous M7H mutant is unusually split. The M7H mutation decreases the midpoint potential of the bound heme by 260 mV at pH 7 and considerably alters the pH dependence of the E(m), which becomes dominated by a single pK(red) = 6.8.

Rectified photocurrent in a protein based molecular photo-diode consisting of a cytochrome b562-green fluorescent protein chimera self-assembled monolayer

We fabricated a self-assembled monolayer (SAM) of a chimeric protein created as a novel model protein for an artificial light-harvesting complex (LHC) composed of two proteins, cytochrome b(562) (cytb(562)) mutated for SAM fabrication (cytb(562), N22C, G82C) and enhanced green fluorescent protein (EGFP). The SAM formation of chimeric protein on a single-crystalline Au(111) substrate was confirmed by atomic force microscopy (AFM) measurement. The rectified photocurrent of the chimeric protein SAM on a gold substrate was detected by light-illumination scanning tunneling microscopy (LI-STM) co-operated with a lock-in technique. The photocurrent generation of the chimeric protein SAM was wavelength-specific to the light-illumination (488 nm), which indicated that the EGFP part of the chimera plays a role as a sensitizer in the photo-induced electron transfer process.

PQQ glucose dehydrogenase with novel electron transfer ability

PQQ glucose dehydrogenase from Acinetobacter calcoaceticus (GDH-B) is one of the most industrially attractive enzymes, as a sensor constituent for glucose sensing, because of its high catalytic activity and insensitivity to oxygen. We attempted to engineer GDH-B to enable electron transfer to the electrode in the absence of artificial electron mediator by mimicking the domain structure of the quinohemoprotein ethanol dehydrogenase (QH-EDH) from Comamonas testosteroni, which is composed of a PQQ-containing catalytic domain and a cytochrome c domain. We genetically fused the cytochrome c domain of QH-EDH to the C-terminal of GDH-B. The constructed fusion protein showed not only intra-molecular electron transfer, between PQQ and heme of the cytochrome c domain, but also electron transfer from heme to the electrode, thereby allowing the construction of a direct electron transfer-type glucose sensor.

Secondary structure analyses of protein films on gold surfaces by circular dichroism

In order to analyze the secondary structures of protein molecules adsorbed on gold surfaces, circular dichroism (CD) spectra were measured and the secondary structure contents of protein ultra-thin films were estimated quantitatively. A disulfide group was introduced to cytochrome b(562) (cyt.b562), which is a water-soluble b-type heme protein. The cyt.b562 molecules self-assembled to form an ultra-thin protein film both on a gold substrate modified with 2,2(')-dithiodiacetic acid and on a bare gold surface. CD measurements were carried out both in solution and in air, and these results were compared. The protein denaturation was partially prevented, not only in solution but also in air, by both the modification of the substrate and the introduction of the anchor group to the protein molecule. The secondary structure contents of ultra-thin protein films on flat gold surfaces were observed for the first time both in solution and in air by CD spectra.

How cytochromes with different folds control heme redox potentials

The electrochemical midpoint potentials (E(m)'s) of 13 cytochromes, in globin (c, c(2), c(551), c(553)), four-helix bundle (c', b(562)), alpha beta roll (b(5)), and beta sandwich (f) motifs, with E(m)'s spanning 450 mV were calculated with multiconformation continuum electrostatics (MCCE). MCCE calculates changes in oxidation free energy when a heme-axial ligand complex is moved from water into protein. Calculated and experimental E(m)'s are in good agreement for cytochromes with His-Met and bis-His ligated hemes, where microperoxidases provide reference E(m)'s. In all cytochromes, E(m)'s are raised by 130-260 mV relative to solvated hemes by the loss of reaction field (solvation) energy. However, there is no correlation between E(m) and heme surface exposure. Backbone amide dipoles in loops or helix termini near the axial ligands raise E(m)'s, but amides in helix bundles contribute little. Heme propionates lower E(m)'s. If the propionic acids are partially protonated in the reduced cytochrome, protons are released on heme oxidation, contributing to the pH dependence of the E(m). In all cytochromes studied except b(5)'s and low potential globins, buried side chains raise E(m)'s. MCCE samples ionizable group protonation states, heme redox states, and side chain rotamers simultaneously. Globins show the largest structural changes on heme oxidation and four-helix bundles the least. Given the calculated protein-induced E(m) shift and measured cytochrome E(m) the five-coordinate, His heme in c' is predicted to have a solution E(m) between that of isolated bis-His and His-Met hemes, while the reference E(m) for His-Ntr ligands in cytochrome f should be near that of His-Met hemes.

Glucose enzyme electrode using cytochrome b(562) as an electron mediator

We demonstrate the construction of glucose sensors employing pyrroloquinoline quinone (PQQ) glucose dehydrogenase (PQQGDH) from Acinetobacter calcoaceticus and glucose oxidase (GOD) from Aspergillus nigar coupled with Escherichia coli soluble cytochrome b(562) (cyt b(562)) as electron acceptor. PQQGDH and GOD do not show direct electrochemical recycling of the prosthetic group at the electrode surface leading to a corresponding current signal. We constructed PQQGDH and GOD electrodes co-immobilized with 100-fold molar excess of cyt b(562) and investigated the electrochemical properties without synthetic electron mediators. PQQGDH/cyt b(562) and GOD/cyt b(562) electrodes both responded well to glucose whereas no current increase was observed from the electrode immobilizing enzyme alone. The detection limits for the PQQGDH/cyt b(562) and GOD/cyt b(562) electrodes were 0.1 and 0.8 mM, respectively, and their linearity extended to over 2 and 9 mM, respectively. These results demonstrate that a sensor system can be constructed without a synthetic electron mediator by using a natural electron acceptor. Furthermore, we have demonstrated the potential application of cyt b(562) in direct electron transfer type sensor systems with oxidoreductases whose quaternary structure do not contain any electron transfer subunit.

Design of an artificial light-harvesting unit by protein engineering: cytochrome b(562)-green fluorescent Protein chimera

We have generated a novel model protein for an artificial light-harvesting complex composed of two proteins, cytochrome b(562) (cytb(562)) and enhanced green fluorescent protein (EGFP), in which two chromophores are fixed in each protein matrix. Cytb(562) was appended to the N-terminus of EGFP via a Gly-Ser linker and the resultant fusion protein was successfully expressed in Escherichia coli as a mixture of the apo- and the holo-forms as to the cytb(562) moiety. The fluorescence of EGFP was substantially quenched when the apo-form was reconstituted with hemin. Based on the fluorescence lifetime measurements, it appeared that light energy entrapped by EGFP is transferred to the heme of cytb(562) by resonance energy transfer (energy transfer yield: 65%). Spatial organization of two chromophores using small and stable protein matrices will be promising toward the construction of an artificial light-harvesting complex by protein engineering.

Total synthesis of cytochrome b562 by native chemical ligation using a removable auxiliary

We have completed the total chemical synthesis of cytochrome b562 and an axial ligand analogue, [SeMet(7)]cyt b562, by thioester-mediated chemical ligation of unprotected peptide segments. A novel auxiliary-mediated native chemical ligation that enables peptide ligation to be applied to protein sequences lacking cysteine was used. A cleavable thiol-containing auxiliary group, 1-phenyl-2-mercaptoethyl, was added to the alpha-amino group of one peptide segment to facilitate amide bond-forming ligation. The amine-linked 1-phenyl-2-mercaptoethyl auxiliary was stable to anhydrous hydrogen fluoride used to cleave and deprotect peptides after solid-phase peptide synthesis. Following native chemical ligation with a thioester-containing segment, the auxiliary group was cleanly removed from the newly formed amide bond by treatment with anhydrous hydrogen fluoride, yielding a full-length unmodified polypeptide product. The resulting polypeptide was reconstituted with heme and folded to form the functional protein molecule. Synthetic wild-type cyt b562 exhibited spectroscopic and electrochemical properties identical to the recombinant protein, whereas the engineered [SeMet(7)]cyt b562 analogue protein was spectroscopically and functionally distinct, with a reduction potential shifted by approximately 45 mV. The use of the 1-phenyl-2-mercaptoethyl removable auxiliary reported here will greatly expand the applicability of total protein synthesis by native chemical ligation of unprotected peptide segments.

Cytochrome b562 variants: a library for examining redox potential evolution

A general understanding of how cytochromes evolve within a fixed structure to optimize redox potential for specific bioenergetic processes does not exist. Toward this end, a library approach is used to investigate the range and distribution of redox potential which occurs when all sequence space available through mutation at two positions is examined within a fixed structural motif. Random mutation of Phe61 and Phe65 of cytochrome b562 (E. coli), and subsequent examination of a statistically significant sampling of this library, demonstrates that the redox potential can vary over 100 mV (>25% of the known accessible potential in native proteins with axial His-Met ligation) through mutation at these two positions. The redox potential of the wild-type protein occurs at an extremum of the distribution observed, indicating that Phe61 and Phe65 were most likely naturally selected to differentially stabilize the reduced state of the protein. At the other extremum, a compositionally conservative set of mutations (F61I, F65Y) leads to a 100 mV shift in the redox equilibrium toward the oxidized state. NMR analyses indicate that a charge-dipole interaction which results from mutation of phenylalanine to tyrosine at position 65 may be responsible.

Structural consequences of b- to c-type heme conversion in oxidized Escherichia coli cytochrome b562

An NMR characterization of the 98Arg --> Cys variant of iron (III)-containing cytochrome b562 from Escherichia coli has been performed and the solution structure obtained. This variant has a covalent bond between the heme and Cys 98, thus mimicking the heme binding in cytochrome c. The R98C cytochrome is shown to have a significantly increased stability, compared to that of wild type, toward thermal and chemical denaturation. In water at 20 degrees C it is 5.60 kJ mol-1 more stable than the WT protein, measured by equilibrium guanidine hydrochloride denaturation. The structure has been obtained through two-dimensional total correlation spectroscopy (TOCSY) and nuclear Overhauser effect spectroscopy (NOESY) experiments and through three-dimensional NOESY-15N heteronuclear multiple quantum coherence (HMQC). By these methods, 85% of protons and 100% of backbone nitrogens were assigned. 2145 meaningful nuclear Overhauser effects (NOEs) (20 NOEs per residue), 45 backbone 3J values, and 397 pseudocontact shifts were used to obtain a family of 35 members, which were then energy-minimized. The root-mean-square deviation (RMSD) with respect to the average structure is 0.50 +/- 0.07 for the backbone and 1.01 +/- 0.08 for the heavy atoms. The magnetic anisotropy resulting from analysis of the pseudocontact shifts indicates an anisotropy that is an intermediate between that of the wild-type, which is the smallest, and cytochrome c. The g values confirm a higher anisotropy of the variant with respect to the wild-type protein. The chirality of the heme 2 alpha carbon is the same as that in all naturally occurring cytochromes c. The overall secondary structure and tertiary structure are very similar to the wild type. The removal of Arg 98 causes a change in the pH-dependent properties. The pKa, proposed to be due to deprotonation of the coordinated histidine, is 1.5 units higher than in the wild type, consistent with the lack of the positive charge of Arg 98 close to the ionizable group. This is further support for the coordinated histidine being the titratable group with an alkaline pKa in the wild-type protein. The pattern of the shifts of the heme methyl groups is different than in the wild-type protein, presumably due to alteration of the electronic structure by the presence of the covalent bond between the protein and the heme. The difference in stability between the variant and wild-type protein is discussed in terms of the structural information.

Effect of redox state on unfolding energetics of heme proteins

Both the enthalpic and entropic contributions to unfolding of three heme proteins, cytochrome b(562), cytochrome c and myoglobin, are larger for the reduced than for the oxidized form. Thus, the higher thermodynamic stability of a reduced, as compared to an oxidized, heme protein is the net result of a large increase of favorable enthalpy and a small increase in unfavorable entropy. Upon comparing the unfolding energetics of the heme proteins to those of other single-domain proteins I find that protein length is the primary determinant of the thermodynamics.

Cytochrome b562 folding triggered by electron transfer: approaching the speed limit for formation of a four-helix-bundle protein

Ferrocytochrome b562 [Fe(II)cyt b562] folding can be triggered by photoinduced electron transfer to unfolded Fe(III)cyt b562 in 2-3 M guanidine hydrochloride solutions. The folding rates increase with decreasing guanidine hydrochloride; the extrapolated time constant for this folding process in the absence of denaturant (5 micros) is near the predicted value for intrachain diffusion. The relatively smooth energy landscape indicated for Fe(II)cyt b562 folding accords with the helical, highly symmetrical structure of the protein.