An approach to the O2 activating mononuclear non-heme Fe enzymes: structural characterization of Fe(II)–acetato complex and formation of alkylperoxoiron(III) species with the highly hindered hydrotris(3-tert-butyl-5-isopropyl-1-pyrazolyl)borate

Oxygen atom transfer mediated by an iron(IV)/iron(II) macrocyclic complex containing pyridine and tertiary amine donors

A new non-heme iron model complex containing a high-spin iron(II) complexed with N-methylated pyridine-containing macrocycle was synthesized and crystallographically characterized. The complex generates peroxo- and high-valent iron-oxo intermediates in reactions with tert-butylhydroperoxide and isopropyl 2-iodoxybenzoate, respectively, allowing to gain insight into the formation and reactivity of enzyme-like intermediates related to biological oxygen activation. The formation and reactivity of these intermediate species were investigated by the stopped-flow methodology. The mechanism of oxygen transfer to organic substrates involving reaction of oxoiron(IV) intermediate was elucidated on the basis of spectroscopic and kinetic data. Incorporation of a pyridine ring into the macrocycle increased the reactivity of the Fe(IV)=O intermediates in comparison with polyamine tetraaza macrocyclic complexes: ferryl (Fe(IV)=O) species derived from 3 demonstrated electrophilic reactivity in transferring an oxygen atom to substituted triarylphosphines and to olefins (such as cyclooctene). However, iron(III) alkylperoxo intermediate was unreactive with cyclooctene.

Role of Fe(IV)-oxo intermediates in stoichiometric and catalytic oxidations mediated by iron pyridine-azamacrocycles

An iron(II) complex with a pyridine-containing 14-membered macrocyclic (PyMAC) ligand L1 (L1 = 2,7,12-trimethyl-3,7,11,17-tetra-azabicyclo[11.3.1]heptadeca-1(17),13,15-triene), 1, was prepared and characterized. Complex 1 contains low-spin iron(II) in a pseudo-octahedral geometry as determined by X-ray crystallography. Magnetic susceptibility measurements (298 K, Evans method) and Mössbauer spectroscopy (90 K, δ = 0.50(2) mm/s, ΔE(Q) = 0.78(2) mm/s) confirmed that the low-spin configuration of Fe(II) is retained in liquid and frozen acetonitrile solutions. Cyclic voltammetry revealed a reversible one-electron oxidation/reduction of the iron center in 1, with E(1/2)(Fe(III)/Fe(II)) = 0.49 V vs Fc(+)/Fc, a value very similar to the half-wave potentials of related macrocyclic complexes. Complex 1 catalyzed the epoxidation of cyclooctene and other olefins with H(2)O(2). Low-temperature stopped-flow kinetic studies demonstrated the formation of an iron(IV)-oxo intermediate in the reaction of 1 with H(2)O(2) and concomitant partial ligand oxidation. A soluble iodine(V) oxidant, isopropyl 2-iodoxybenzoate, was found to be an excellent oxygen atom donor for generating Fe(IV)-oxo intermediates for additional spectroscopic (UV-vis in CH(3)CN: λ(max) = 705 nm, ε ≈ 240 M(-1) cm(-1); Mössbauer: δ = 0.03(2) mm/s, ΔE(Q) = 2.00(2) mm/s) and kinetic studies. The electrophilic character of the (L1)Fe(IV)═O intermediate was established in rapid (k(2) = 26.5 M(-1) s(-1) for oxidation of PPh(3) at 0 °C), associative (ΔH(‡) = 53 kJ/mol, ΔS(‡) = -25 J/K mol) oxidation of substituted triarylphosphines (electron-donating substituents increased the reaction rate, with a negative value of Hammet's parameter ρ = -1.05). Similar double-mixing kinetic experiments demonstrated somewhat slower (k(2) = 0.17 M(-1) s(-1) at 0 °C), clean, second-order oxidation of cyclooctene into epoxide with preformed (L1)Fe(IV)═O that could be generated from (L1)Fe(II) and H(2)O(2) or isopropyl 2-iodoxybenzoate. Independently determined rates of ferryl(IV) formation and its subsequent reaction with cyclooctene confirmed that the Fe(IV)-oxo species, (L1)Fe(IV)═O, is a kinetically competent intermediate for cyclooctene epoxidation with H(2)O(2) at room temperature. Partial ligand oxidation of (L1)Fe(IV)═O occurs over time in oxidative media, reducing the oxidizing ability of the ferryl species; the macrocyclic nature of the ligand is retained, resulting in ferryl(IV) complexes with Schiff base PyMACs. NH-groups of the PyMAC ligand assist the oxygen atom transfer from ferryl(IV) intermediates to olefin substrates.

Four-coordinate trispyrazolylboratomanganese and -iron complexes with a pyrazolato co-ligand: syntheses and properties as oxidation catalysts

A series of complexes of the type [(Tp(R1,R2))M(X)] (Tp = trispyrazolylborato) with R(1)/R(2) combinations Me/tBu, Ph/Me, iPr/iPr, Me/Me and for M = Mn or Fe coordinating [Pz(Me,tBu)](-) (Pz = pyrazolato) or Cl(-) as co-ligand X has been synthesised. Although the chloride complexes were very unreactive and stable in air, the pyrazolato series was far more reactive in contact with oxidants like O(2) and tBuOOH. The [(Tp(R1,R2))M(Pz(Me,tBu))] complexes proved to be active pre-catalysts for the oxidation of cyclohexene with tBuOOH, reaching turnover frequencies (TOFs) ranging between moderate and good in comparison to other manganese catalysts. Cyclohexene-3-one and cyclohexene-3-ol were always found to represent the main products, with cyclohexene oxide occasionally formed as a side product. The ratios of the different oxidation products varied with the reaction conditions: in the case of a peroxide/alkene ratio of 4:1, considerably more ketone than alcohol was obtained and cyclohexene oxide formation was almost negligible, whereas a ratio of 1:10 led to a significant increase of the alcohol proportion and to the formation of at least small amounts of the epoxide. Pre-treatment of the dissolved [(Tp(R1,R2))M(Pz(Me,tBu))] pre-catalysts with O(2) led to product distributions and TOFs that were very similar to those found in the absence of O(2), so that it may be argued that tBuOOH and O(2) both lead to the same active species. The results of EPR spectroscopy and ESI-MS suggest that the initial product of the reaction of [(Tp(Me,Me))Mn(Pz(Me,tBu))] with O(2) contains a Mn(III)(O)(2)Mn(IV) core. Prolonged exposure to O(2) leads to a different dinuclear complex containing three O-bridges and resulting in different TOFs/product distributions. Analogous findings were made for other complexes and formation of these overoxidised products may explain the deviation of the catalytic performances if the reactions are carried out in an O(2) atmosphere.

Reactivity of copper(II)-alkylperoxo complexes

Copper(II) complexes 1a and 1b, supported by tridentate ligand bpa [bis(2-pyridylmethyl)amine] and tetradentate ligand tpa [tris(2-pyridylmethyl)amine], respectively, react with cumene hydroperoxide (CmOOH) in the presence of triethylamine in CH(3)CN to provide the corresponding copper(II) cumylperoxo complexes 2a and 2b, the formation of which has been confirmed by resonance Raman and ESI-MS analyses using (18)O-labeled CmOOH. UV-vis and ESR spectra as well as DFT calculations indicate that 2a has a 5-coordinate square-pyramidal structure involving CmOO(-) at an equatorial position and one solvent molecule at an axial position at low temperature (-90 °C), whereas a 4-coordinate square-planar structure that has lost the axial solvent ligand is predominant at higher temperatures (above 0 °C). Complex 2b, on the other hand, has a typical trigonal bipyramidal structure with the tripodal tetradentate tpa ligand, where the cumylperoxo ligand occupies an axial position. Both cumylperoxo copper(II) complexes 2a and 2b are fairly stable at ambient temperature, but decompose at a higher temperature (60 °C) in CH(3)CN. Detailed product analyses and DFT studies indicate that the self-decomposition involves O-O bond homolytic cleavage of the peroxo moiety; concomitant hydrogen-atom abstraction from the solvent is partially involved. In the presence of 1,4-cyclohexadiene (CHD), the cumylperoxo complexes react smoothly at 30 °C to give benzene as one product. Detailed product analyses and DFT studies indicate that reaction with CHD involves concerted O-O bond homolytic cleavage and hydrogen-atom abstraction from the substrate, with the oxygen atom directly bonded to the copper(II) ion (proximal oxygen) involved in the C-H bond activation step.

X-ray absorption spectroscopic studies of high-spin nonheme (alkylperoxo)iron(III) intermediates

The reactions of iron(II) complexes [Fe(T(pt-Bu,i-Pr))(OH)] (1a, Tp(t-Bu,i-Pr) = hydrotris(3-tert-butyl-5-isopropyl-1-pyrazolyl)borate), [Fe(6-Me2BPMCN)(OTf)2] (1b, 6-Me2BPMCN = N,N'-bis((2-methylpyridin-6-yl)methyl)-N,N'-dimethyl-trans-1,2-diaminocyclohexane), and [Fe(L8Py2)(OTf)](OTf) (1c, L8Py2 = 1,5-bis(pyridin-2-ylmethyl)-1,5-diazacyclooctane) with tert-BuOOH give rise to high-spin FeIII-OOR complexes. X-ray absorption spectra (XAS) of these high-spin species show characteristic features, distinct from those of low-spin Fe-OOR complexes (Rohde, J.-U.; et al. J. Am. Chem. Soc. 2004, 126, 16750-16761). These include (1) an intense 1s --> 3d preedge feature, with an area around 20 units, (2) an edge energy, ranging from 7122 to 7126 eV, that is affected by the coordination environment, and (3) a 1.86-1.96 A Fe-OOR bond, compared to the 1.78 A Fe-OOR bond in low-spin complexes. These unique features likely arise from a flexible first coordination sphere in those complexes. The difference in Fe-OOR bond length may rationalize differences in reactivity between low-spin and high-spin FeIII-OOR species.

Kinetic analysis of the conversion of nonheme (alkylperoxo)iron(III) species to iron(IV) complexes

Low-spin mononuclear (alkylperoxo)iron(III) complexes decompose by peroxide O-O bond homolysis to form iron(IV) species. We examined the kinetics of previously reported homolysis reactions for (alkylperoxo)iron(III) intermediates supported by TPA (tris(2-pyridylmethyl)amine) in CH3CN solution and promoted by pyridine N-oxide, and by BPMCN (N,N-bis(2-pyridylmethyl)-N,N-dimethyl-trans-1,2-diaminocyclohexane) in its cis-beta configuration in CH3CN and CH2Cl2, as well as for the previously unreported chemistry of TPA and 5-Me3TPA intermediates in acetone. Each of these reactions forms an oxoiron(IV) complex, except for the beta-BPMCN reaction in CH2Cl2 that yields a novel (hydroxo)(alkylperoxo)iron(IV) product. Temperature-dependent rate measurements suggest a common reaction trajectory for each of these reactions and verify previous theoretical estimates of a ca. 60 kJ/mol enthalpic barrier to homolysis. However, both the tetradentate supporting ligand and exogenous ligands in the sixth octahedral coordination site significantly perturb the homolyses, such that observed rates can vary over 2 orders of magnitude at a given temperature. This is manifested as a compensation effect in which increasing activation enthalpy is offset by increasingly favorable activation entropy. Moreover, the applied kinetic model is consistent with geometric isomerism in the low-spin (alkylperoxo)iron(III) intermediates, wherein the alkylperoxo ligand is coordinated in either of the inequivalent cis sites afforded by the nonheme ligands.

Bis(pyrazol-1-yl)acetates as Tripodal Heteroscorpionate Ligands in Iron Chemistry: Syntheses and Structures of Iron(II) and Iron(III) Complexes with bpza, bdmpza, and bdtbpza Ligands

The molecular structure of the previously reported species "[Fe(bdtbpza)Cl]" has been revealed by X-ray structure determination to be a ferrous dimer [Fe(bdtbpza)Cl](2) (2c) [bdtbpza = bis(3,5-di-tert-butylpyrazol-1-yl)acetate]. The syntheses of ferrous 2:1 complexes [Fe(bpza)(2)] (3a) and [Fe(bdtbpza)(2)] (3c) as well as ferric 1:1 complexes [NEt(4)][Fe(bpza)Cl(3)] (4a) and [NEt(4)][Fe(bdmpza)Cl(3)] (4b) [bpza = bis(pyrazol-1-yl)acetate, bdmpza = bis(3,5-dimethylpyrazol-1-yl)acetate] are reported. Complexes 3a, previously reported [Fe(bdmpza)(2)] (3b), and 3c are high-spin. No spin crossover to the low-spin state was observed in the temperature range of 5-350 K. 4a and 4b are synthesized in one step and in high yield from [NEt(4)](2)[Cl(3)FeOFeCl(3)]. 4a and 4b are iron(III) high-spin complexes. Crystallographic information: 2c (C(24)H(39)ClFeN(4)O(2).CH(2)Cl(2).CH(3)CN) is triclinic, P1, a = 12.171(16) A, b = 12.851(14) A, c = 13.390(13) A, alpha = 98.61(9) degrees, beta = 113.51(11) degrees, gamma = 108.10(5) degrees, Z = 2; 3a (C(8)H(7)Fe(0.5)N(4)O(2)) is monoclinic, P2(1)/n, a = 7.4784(19) A, b = 7.604(3) A, c = 16.196(4) A, beta = 95.397(9) degrees, Z = 4; 3c (C(24)H(39)Fe(0.5)N(4)O(2)) is monoclinic, P2(1)/n, a = 9.939(6) A, b = 18.161(10) A, c = 13.722(8) A, beta = 97.67(7) degrees, Z = 4; 4b (C(20)H(35)Cl(3)FeN(5)O(2)) is monoclinic, C2/c, a = 30.45(6) A, b = 12.33(2) A, c = 16.17(3) A, beta = 118.47(5) degrees, Z = 8.

Oxygen activation by nonheme iron(II) complexes: alpha-keto carboxylate versus carboxylate

Mononuclear iron(II) alpha-keto carboxylate and carboxylate compounds of the sterically hindered tridentate face-capping ligand Tp(Ph2) (Tp(Ph2) = hydrotris(3,5-diphenylpyrazol-1-yl)borate) were prepared as models for the active sites of nonheme iron oxygenases. The structures of an aliphatic alpha-keto carboxylate complex, [Fe(II)(Tp(Ph2))(O(2)CC(O)CH(3))], and the carboxylate complexes [Fe(II)(Tp(Ph2))(OBz)] and [Fe(II)(Tp(Ph2))(OAc)(3,5-Ph(2)pzH)] were determined by single-crystal X-ray diffraction, all of which have five-coordinate iron centers. Both the alpha-keto carboxylate and the carboxylate compounds react with dioxygen resulting in the hydroxylation of a single ortho phenyl position of the Tp(Ph2) ligand. The oxygenation products were characterized spectroscopically, and the structure of the octahedral iron(III) phenolate product [Fe(III)(Tp(Ph2))(OAc)(3,5-Ph(2)pzH)] was established by X-ray diffraction. The reaction of the alpha-keto carboxylate model compounds with oxygen to produce the phenolate product occurs with concomitant oxidative decarboxylation of the alpha-keto acid. Isotope labeling studies show that (18)O(2) ends up in the Tp(Ph2) phenolate oxygen and the carboxylate derived from the alpha-keto acid. The isotope incorporation mirrors the dioxygenase nature of the enzymatic systems. Parallel studies on the carboxylate complexes demonstrate that the oxygen in the hydroxylated ligand is also derived from molecular oxygen. The oxygenation of the benzoylformate complex is demonstrated to be first order in metal complex and dioxygen, with activation parameters DeltaH++ = 25 +/- 2 kJ mol(-1) and DeltaS++ = -179 +/- 6 J mol(-1) K(-1). The rate of appearance of the iron(III) phenolate product is sensitive to the nature of the substituent on the benzoylformate ligand, exhibiting a Hammett rho value of +1.3 indicative of a nucleophilic mechanism. The proposed reaction mechanism involves dioxygen binding to produce an iron(III) superoxide species, nucleophilic attack of the superoxide at the alpha-keto functionality, and oxidative decarboxylation of the adduct to afford the oxidizing species that attacks the Tp(Ph2) phenyl ring. Interestingly, the alpha-keto carboxylate complexes react 2 orders of magnitude faster than the carboxylate complexes, thus emphasizing the key role that the alpha-keto functionality plays in oxygen activation by alpha-keto acid-dependent iron enzymes.

Synthesis, X-ray crystal structure, and redox and electronic properties of iron(III)-polyimidazole complexes relevant to the metal sites of iron proteins

A new tripod N(3) ligand (L), containing three imidazole rings, was synthesized in good yield. At variance with usual aromatic ligands with N(2) or N(3) donor sets such as pyridine or pyrazole derivatives, L stabilizes the Fe(III) oxidation state. The corresponding iron(III) complexes [Fe(L)Cl(3)] (1) and [Fe(L)(2)](ClO(4))(3) (2) were prepared and characterized by X-ray structural analysis and spectroscopic methods. The coordination environment around all the Fe(III) centers has a distorted octahedral geometry. [Fe(L)Cl(3)] (1) belongs to the monoclinic system, space group P2(1)/n, a = 9.7406(5) A, b = 17.207(2) A, c = 14.615(2) A, beta = 104.448(9)(o) Z = 4, V = 2372.1(4) A(3); R = 0.044, R(w) = 0.055. [Fe(L)(2)](ClO(4))(3) (2) belongs to the monoclinic system, space group P2(1)/c, a = 16.1057(15) A, b = 11.1079(12) A, c = 26.283(2) A, beta = 102.062(10)(o), Z = 4, V = 4598.2(8) A(3); R = 0.0465, R(w) = 0.0902. The Fe-N((i)PrIm) bond lengths are systematically longer than the Fe-N(MeIm) ones. Compound 2 is a highly anisotropic low-spin Fe(III) complex displaying a rather unusual EPR spectrum with a sharp signal at g = 3.5 and a broad one at g approximately 1.6. The fitting of this EPR spectrum is discussed.

Biomimetic aryl hydroxylation derived from alkyl hydroperoxide at a nonheme iron center. Evidence for an Fe(IV)=O oxidant

Many nonheme iron-dependent enzymes activate dioxygen to catalyze hydroxylations of arene substrates. Key features of this chemistry have been developed from complexes of a family of tetradentate tripodal ligands obtained by modification of tris(2-pyridylmethyl)amine (TPA) with single alpha-arene substituents. These included the following: -C(6)H(5) (i.e., 6-PhTPA), L(1); -o-C(6)H(4)D, o-d(1)-L(1); -C(6)D(5), d(5)-L(1); -m-C(6)H(4)NO(2), L(2); -m-C(6)H(4)CF(3), L(3); -m-C(6)H(4)Cl, L(4); -m-C(6)H(4)CH(3), L(5); -m-C(6)H(4)OCH(3), L(6); -p-C(6)H(4)OCH(3), L(7). Additionally, the corresponding ligand with one alpha-phenyl and two alpha-methyl substituents (6,6-Me(2)-6-PhTPA, L(8)) was also synthesized. Complexes of the formulas [(L(1))Fe(II)(NCCH(3))(2)](ClO(4))(2), [(L(n)())Fe(II)(OTf)(2)] (n = 1-7, OTf = (-)O(3)SCF(3)), and [(L(8))Fe(II)(OTf)(2)](2) were obtained and characterized by (1)H NMR and UV-visible spectroscopies and by X-ray diffraction in the cases of [(L(1))Fe(II)(NCCH(3))(2)](ClO(4))(2), [(L(6))Fe(II)(OTf)(2)], and [(L(8))Fe(II)(OTf)(2)](2). The complexes react with tert-butyl hydroperoxide ((t)()BuOOH) in CH(3)CN solutions to give iron(III) complexes of ortho-hydroxylated ligands. The product complex derived from L(1) was identified as the solvated monomeric complex [(L(1)O(-))Fe(III)](2+) in equilibrium with its oxo-bridged dimer [(L(1)O(-))(2)Fe(III)(2)(mu(2)-O)](2+), which was characterized by X-ray crystallography as the BPh(4)(-) salt. The L(8) product was also an oxo-bridged dimer, [(L(8)O(-))(2)Fe(III)(2)(mu(2)-O)](2+). Transient intermediates were observed at low temperature by UV-visible spectroscopy, and these were characterized as iron(III) alkylperoxo complexes by resonance Raman and EPR spectroscopies for L(1) and L(8). [(L(1))Fe(II)(OTf)(2)] gave rise to a mixture of high-spin (S = 5/2) and low-spin (S = 1/2) Fe(III)-OOR isomers in acetonitrile, whereas both [(L(1))Fe(OTf)(2)] in CH(2)Cl(2) and [(L(8))Fe(OTf)(2)](2) in acetonitrile afforded only high-spin intermediates. The L(1) and L(8) intermediates both decomposed to form respective phenolate complexes, but their reaction times differed by 3 orders of magnitude. In the case of L(1), (18)O isotope labeling indicated that the phenolate oxygen is derived from the terminal peroxide oxygen via a species that can undergo partial exchange with exogenous water. The iron(III) alkylperoxo intermediate is proposed to undergo homolytic O-O bond cleavage to yield an oxoiron(IV) species as an unobserved reactive intermediate in the hydroxylation of the pendant alpha-aryl substituents. The putative homolytic chemistry was confirmed by using 2-methyl-1-phenyl-2-propyl hydroperoxide (MPPH) as a probe, and the products obtained in the presence and in the absence of air were consistent with formation of alkoxy radical (RO(*)). Moreover, when one ortho position was labeled with deuterium, no selectivity was observed between hydroxylation of the deuterated and normal isotopomeric ortho sites, but a significant 1,2-deuterium shift ("NIH shift") occurred. These results provide strong mechanistic evidence for a metal-centered electrophilic oxidant, presumably an oxoiron(IV) complex, in these arene hydroxylations and support participation of such a species in the mechanisms of the nonheme iron- and pterin-dependent aryl amino acid hydroxylases.

Electronic structure and reactivity of high-spin iron--alkyl- and--pterinperoxo complexes

The spectroscopic properties and electronic structure of the four-coordinate high-spin [FeIII(L3)(OOtBu)]+ complex (1; L3 = hydrotris(3-tert-butyl-5-isopropyl-1-pyrazolyl)borate; tBu = tert-butyl) are investigated and compared to the six-coordinated high-spin [Fe(6-Me3TPA)(OHx)(OOtBu)]x+ system (TPA = tris(2-pyridylmethyl)amine, x = 1 or 2) studied earlier [Lehnert, N.; Ho, R. Y. N.; Que, L., Jr.; Solomon, E. I. J. Am. Chem. Soc. 2001, 123, 12802-12816]. Complex 1 is characterized by Raman features at 889 and 830 cm-1 which are assigned to the O-O stretch (mixed with the symmetric C-C stretch) and a band at 625 cm-1 that corresponds to nu(Fe-O). The UV-vis spectrum shows a charge-transfer (CT) transition at 510 nm from the alkylperoxo pi v* (v = vertical to C-O-O plane) to a d orbital of Fe(III). A second CT is identified from MCD at 370 nm that is assigned to a transition from pi h* (h = horizontal to C-O-O plane) to an Fe(III) d orbital. For the TPA complex the pi v* CT is at 560 nm while the pi h* CT is to higher energy than 250 nm. These spectroscopic differences between four- and six-coordinate Fe(III)-OOR complexes are interpreted on the basis of their different ligand fields. In addition, the electronic structure of Fe-OOPtn complexes with the biologically relevant pterinperoxo ligand are investigated. Substitution of the tert-butyl group in 1 by pterin leads to the corresponding Fe(III)-OOPtn species (2), which shows a stronger electron donation from the peroxide to Fe(III) than 1. This is related to the lower ionization potential of pterin. Reduction of 2 by one electron leads to the Fe(II)-OOPtn complex (3), which is relevant as a model for potential intermediates in pterin-dependent hydroxylases. However, in the four-coordinate ligand field of 3, the additional electron is located in a nonbonding d orbital of iron. Hence, the pterinperoxo ligand is not activated for heterolytic cleavage of the O-O bond in this system. This is also evident from the calculated reaction energies that are endothermic by at least 20 kcal/mol.

Synthesis and characterization of a series of (hydroperoxo)-, (alkylperoxo)-, and (mu-peroxo)palladium complexes containing the hydrotris(3,5-diisopropylpyrazolyl)borato ligand (Tp(iPr2)): (Tp(iPr2))(py)Pd-OO-X [X = H, t-Bu, Pd(Tp(iPr2))(py)] and (Tp(iPr2))(py)Pd-(mu-kappa(1):kappa(2)-OO)-PdTp(iPr2)

Dehydrative condensation of the hydroxopalladium complex (Tp(iPr2))(py)Pd-OH (1) with hydroperoxides (XOOH: X = H, t-Bu) produces the corresponding (hydroperoxo)-, (Tp(iPr2))(py)Pd-OOH (2a), and (tert-butylperoxo)palladium complexes, (Tp(iPr2))(py)Pd-OOBu(t) (3). Treatment of 2a with PPh(3) results in concomitant ligand displacement giving (Tp(i)(Pr2))(Ph(3)P)Pd-OOH (2b) and oxygenation of PPh(3) giving O=PPh(3). Further condensation between 1 and 2a gives the mu-kappa(1):kappa(1)-peroxo complex (Tp(iPr2))(py)Pd-OO-Pd(Tp(iPr2))(py) (4), while condensation between the bis(mu-hydroxo)dipalladium complex (PdTp(iPr2))(2)(mu-OH)(2) (7) with 2a affords the unsymmetrical mu-kappa(1):kappa(2)-peroxo complex (Tp(iPr2))(py)Pd-OO-PdTp(iPr2) (5). These peroxopalladium complexes 2-5 have been fully characterized by a combination of spectroscopic and crystallographic analyses, which lead to description of the O-O moieties in these complexes as peroxide (O(2)(2-)) with sp(3)-hybridized oxygen atoms. The OOH moiety in 2b is found to interact with the noncoordinated nitrogen atom of the pendant pyrazolyl group through hydrogen bond. The O(2) moieties in 2-5 turn out to be so nucleophilic (basic) as to add across carbon-heteroatom multiple bonds in acetonitrile and acetaldehyde to give the peroxometallacycle Tp(iPr2)Pd[OOC(Me)=N)]Pd(iPr2)(py)(8) (from 2, 4, and 5) and the acetato complex (Tp(iPr2))(py)Pd-OC(=O)CH(3) (9) (from 2-4), respectively. Methyl vinyl ether and styrene, CH(2)=CHY (Y = OMe, Ph), are converted to the corresponding methyl ketones, CH(3)C(=O)Y, upon treatment with 2-4.

Structural characterization and intramolecular aliphatic C-H oxidation ability of M(III)(mu-O)2M(III) complexes of Ni and Co with the hydrotris-(3,5-dialkyl-4-X-pyrazolyl)borate ligands TpMe2,X (X = Me, H, Br) and TpiPr2

Reaction of the dinuclear M(II)-bis(mu-hydroxo) complexes of nickel and cobalt, [(M(II)(TpR)]2(mu-OH)2] (M = Ni; 3Ni M = Co: 3Co), with one equivalent of H2O2 yields the corresponding M(III)-bis(mu-oxo) complexes, [[M(III)(TpR)]2-(mu-O)2] (M=Ni; 2Ni, M=Co: 2Co). The employment of a series of TpMe2,X (TpMe2,X = hydrotris(3,5-dimethyl-4-X-1-pyrazolyl)borate; X = Me, H, Br) as a metal supporting ligand makes it possible to isolate and structurally characterize the thermally unstable M(III)-bis-(mu-oxo) complexes 2Ni and 2Co. Both the starting (3Ni and 3Co) and resulting complexes (2Ni and 2Co) contain five-coordinate metal centers with a slightly distorted square-pyramidal geometry. Characteristic features of the nickel complexes 2Ni, such as the two intense absorptions around 400 and 300 nm in the UV-visible spectra and the apparent diamagnetism, are very similar to those of the previously reported bis(mu-oxo) species of Cu(III) and Ni(III) with ligands other than TpR, whereas the spectroscopic properties of the cobalt complexes 2Co (i.e., paramagnetically shifted NMR signals and a single intense absorption appearing at 350 nm) are clearly distinct from those of the isostructural nickel compounds 2Ni. Thermal decomposition of 2Ni and 2Co results in oxidation of the inner saturated hydrocarbyl substituents of the TpR ligand. Large kH/kD values obtained from the first-order decomposition rates of the TpMe3 and Tp(CD3)2,Me derivatives of 2 evidently indicate that the rate-determining step is an hydrogen abstraction from the primary C-H bond of the methyl substituents. mediated by the M(III)2-(mu-O)2 species. The nickel complex 2Ni shows reactivity about 10(3) times greater than that of the cobalt analogue 2Co. The oxidation ability of the M(III)(mu-O)2M(III) core should be affected by the hindered TpR ligand system, which can stabilize the +2 oxidation state of the metal centers.

The reduction of oxygen and hydrogen peroxide on dinuclear ruthenium phthalocyanine electrocatalytic surfaces

The electrochemical properties of both mononuclear L2RuIIPc and dinuclear [(THF)Rupc]2 species are described. The former is dominated by ring oxidation and reduction processes while the latter displays a series of metal localized processes. A Pourbaix diagram describes the various surfaces which can be generated by exposing a graphite electrode modified with [(THF)Rupc]2 to aqueous buffer at different polarization over a wide range of pH. The behavior of these various surfaces towards the electrocatalytic reduction of both oxygen and hydrogen peroxide is described. Most importantly, three different regimes of hydrogen peroxide reduction are observed dependent on the nature of the modified electrode surface. At high pH the four electron reduction of oxygen to water is observed via a 2 + 2 mechanism.Key words: phthalocyanine, ruthenium, ruthenium phthalocyanine, cyclic voltammetry, suface modified electrode, Pourbaix diagram, electrocatalysis, oxygen reduction, hydrogen peroxide reduction.