Correction of scrambling rate calculation for loss of substrate

Substrate Specificity and Chemical Mechanism for the Reaction Catalyzed by Glutamine Kinase

Campylobacter jejuni, a leading cause of gastroenteritis worldwide, has a unique O-methyl phosphoramidate (MeOPN) moiety attached to its capsular polysaccharide. Investigations into the biological role of MeOPN have revealed that it contributes to the pathogenicity of C. jejuni, and this modification is important for the colonization of C. jejuni. Previously, the reactions catalyzed by four enzymes (Cj1418-Cj1415) from C. jejuni that are required for the biosynthesis of the phosphoramidate modification have been elucidated. Cj1418 (l-glutamine kinase) catalyzes the formation of the initial phosphoramidate bond with the ATP-dependent phosphorylation of the amide nitrogen of l-glutamine. Here we show that Cj1418 catalyzes the phosphorylation of l-glutamine through a three-step reaction mechanism via the formation of covalent pyrophosphorylated ( Enz-X-P_β-P_γ) and phosphorylated ( Enz-X-P_β) intermediates. In the absence of l-glutamine, the enzyme was shown to catalyze a positional isotope exchange (PIX) reaction within β-[¹⁸O₄]-ATP in support of the formation of the Enz-X-P_β-P_γintermediate. In the absence of ATP, the enzyme was shown to catalyze a molecular isotope exchange (MIX) reaction between l-glutamine phosphate and [¹⁵N-amide]-l-glutamine in direct support of the Enz-X-P_βintermediate. The active site nucleophile has been identified as His-737 based on the lack of activity of the H737N mutant and amino acid sequence comparisons. The enzyme was shown to also catalyze the phosphorylation of d-glutamine, γ-l-glutamyl hydroxamate, γ-l-glutamyl hydrazide, and β-l-aspartyl hydroxamate, in addition to l-glutamine.

Kinetic mechanism and rate-limiting steps of focal adhesion kinase-1

Steady-state kinetic analysis of focal adhesion kinase-1 (FAK1) was performed using radiometric measurement of phosphorylation of a synthetic peptide substrate (Ac-RRRRRRSETDDYAEIID-NH(2), FAK-tide) which corresponds to the sequence of an autophosphorylation site in FAK1. Initial velocity studies were consistent with a sequential kinetic mechanism, for which apparent kinetic values k(cat) (0.052 +/- 0.001 s(-1)), K(MgATP) (1.2 +/- 0.1 microM), K(iMgATP) (1.3 +/- 0.2 microM), K(FAK-tide) (5.6 +/- 0.4 microM), and K(iFAK-tide) (6.1 +/- 1.1 microM) were obtained. Product and dead-end inhibition data indicated that enzymatic phosphorylation of FAK-tide by FAK1 was best described by a random bi bi kinetic mechanism, for which both E-MgADP-FAK-tide and E-MgATP-P-FAK-tide dead-end complexes form. FAK1 catalyzed the betagamma-bridge:beta-nonbridge positional oxygen exchange of [gamma-(18)O(4)]ATP in the presence of 1 mM [gamma-(18)O(4)]ATP and 1.5 mM FAK-tide with a progressive time course which was commensurate with catalysis, resulting in a rate of exchange to catalysis of k(x)/k(cat) = 0.14 +/- 0.01. These results indicate that phosphoryl transfer is reversible and that a slow kinetic step follows formation of the E-MgADP-P-FAK-tide complex. Further kinetic studies performed in the presence of the microscopic viscosogen sucrose revealed that solvent viscosity had no effect on k(cat)/K(FAK-tide), while k(cat) and k(cat)/K(MgATP) were both decreased linearly at increasing solvent viscosity. Crystallographic characterization of inactive versus AMP-PNP-liganded structures of FAK1 showed that a large conformational motion of the activation loop upon ATP binding may be an essential step during catalysis and would explain the viscosity effect observed on k(cat)/K(m) for MgATP but not on k(cat)/K(m) for FAK-tide. From the positional isotope exchange, viscosity, and structural data it may be concluded that enzyme turnover (k(cat)) is rate-limited by both reversible phosphoryl group transfer (k(forward) approximately 0.2 s(-1) and k(reverse) approximately 0.04 s(-1)) and a slow step (k(conf) approximately 0.1 s(-1)) which is probably the opening of the activation loop after phosphoryl group transfer but preceding product release.

D-Ala-D-X ligases: evaluation of D-alanyl phosphate intermediate by MIX, PIX and rapid quench studies

BACKGROUND

The D-alanyl-D-lactate (D-Ala-D-Lac) ligase is required for synthesis of altered peptidoglycan (PG) termini in the VanA phenotype of vancomycin-resistant enterococci (VRE), and the D-alanyl-D-serine (D-Ala-D-Ser) ligase is required for the VanC phenotype of VRE. Here we have compared these with the Escherichia coli D-Ala-D-Ala ligase DdlB for formation of the enzyme-bound D-alanyl phosphate, D-Ala(1)-PO(3)(2-) (D-Ala(1)-P), intermediate.

RESULTS

The VanC2 ligase catalyzes a molecular isotope exchange (MIX) partial reaction, incorporating radioactivity from (14)C-D-Ser into D-Ala-(14)C-D-Ser at a rate of 0.7 min(-1), which approaches kinetic competence for the reversible D-Ala(1)-P formation from the back direction. A positional isotope exchange (PIX) study with the VanC2 and VanA ligases displayed a D-Ala(1)-dependent bridge to nonbridge exchange of the oxygen-18 label of [gamma-(18)O(4)]-ATP at rates of up to 0.6 min(-1); this exchange was completely suppressed by the addition of the second substrate D-Ser or D-Lac, respectively, as the D-Ala(1)-P intermediate was swept in the forward direction. As a third criterion for formation of bound D-Ala(1)-P, we conducted rapid quench studies to detect bursts of ADP formation in the first turnover of DdlB and VanA. With E. coli DdlB, there was a burst amplitude of ADP corresponding to 26-30% of the DdlB active sites, followed by the expected steady-state rate of 620-650 min(-1). For D-Ala-D-Lac and D-Ala-D-Ala synthesis by VanA, we measured a burst of 25-30% or 51% of active enzyme, respectively.

CONCLUSIONS

These three approaches support the rapid (more than 1000 min(-1)), reversible formation of the enzyme intermediate D-Ala(1)-P by members of the D-Ala-D-X (where X is Ala, Ser or Lac) ligase superfamily.

Positional isotope exchange using phosphorus-31 nuclear magnetic resonance

This chapter has presented the basic methods involved in the use of 31P NMR to study positional isotope exchange in enzyme-catalyzed reactions involving phosphorus-containing substrates. The method is straightforward but requires synthesis of specific 18O isotopically labeled substrates at the site of bond cleavage. Analysis of the kinetic consequences of the PIX reaction depends on the nature of the enzymatic reaction and the number of other substrates involved in the kinetic reaction mechanism. This may be simple or formidable. From the examples described in this article one can appreciate that PIX experiments, when combined with other kinetic methods, can in favorable cases unravel many (if not all) of the rate constants in an enzyme-catalyzed reaction.

Isotope exchange as a probe of the kinetic mechanism of pyrophosphate-dependent phosphofructokinase

Data obtained from isotope exchange at equilibrium, exchange of inorganic phosphate against forward reaction flux, and positional isotope exchange of 18O from the bridge position of pyrophosphate to a nonbridge position all indicate that the pyrophosphate-dependent phosphofructokinase from Propionibacterium freudenreichii has a rapid equilibrium random kinetic mechanism. The maximum rates of isotope exchange at equilibrium for the [14C]fructose 1,6-bisphosphate in equilibrium fructose 6-phosphate, [32P]Pi in equilibrium MgPPi, and Mg[32P]PPi in equilibrium fructose 1,6-bisphosphate exchange reactions increasing all four possible substrate-product pairs in constant ratio are identical, consistent with a rapid equilibrium mechanism. All exchange reactions are strongly inhibited at high concentrations of the fructose 6-phosphate (F6P)/Pi and MgPPi/Pi substrate-product pairs and weakly inhibited at high concentrations of the MgPPi/fructose 1,6-bisphosphate (FBP) pair suggesting three dead-end complexes, E:F6P:Pi, E:MgPPi:Pi, and E:FBP:MgPPi, in agreement with initial velocity studies [Bertagnolli, B.L., & Cook, P.F. (1984) Biochemistry 23, 4101]. Neither back-exchange by [32P]Pi nor positional isotope exchange of 18O-bridge-labeled pyrophosphate was observed under any conditions, suggesting that either the chemical interconversion step or a step prior to it limits the overall rate of the reaction.

Positional isotope exchange

The detection of intermediates in enzyme-catalyzed reactions can be accomplished by several techniques. For those intermediates which do not have easily observed electronic spectra, use can be made of isotope exchange phenomena if the chemistry of the reaction is appropriate. Recently, the technique of positional isotope exchange (intramolecular isotopic scrambling) has been used to study several reactions which have been thought to involve high-energy intermediates in their mechanisms. A review of some of these reactions and the limitations of the method are presented in this article.

Determination of the energetics of the UDP-glucose pyrophosphorylase reaction by positional isotope exchange inhibition

A method has been developed for obtaining qualitative information about enzyme-catalyzed reactions by measuring the inhibitory effects of added substrates on positional isotope exchange rates. It has been demonstrated for ordered kinetic mechanisms that an increase in the concentration of the second substrate to add to the enzyme will result in a linear increase in the ratio of the chemical and positional isotope exchange rates. The slopes and intercepts from these plots can be used to determine the partitioning ratios of binary and ternary enzyme complexes. The method has been applied to the reaction catalyzed by UDP-glucose pyrophosphorylase. A positional isotope exchange reaction was measured within oxygen- 18-labeled UTP as a function of variable glucose 1-phosphate concentration in the forward reaction. In the reverse reaction, a positional isotope exchange reaction was measured within oxygen- 18-labeled UDP-glucose as a function of increasing pyrophosphate concentration. The results have been interpreted to indicate that the interconversion of the ternary central complexes is fast relative to product dissociation in either direction. In the forward direction, the release of UDP-glucose is slower than the release of pyrophosphate. The release of glucose 1-phosphate is slower than the release of UTP in the reverse reaction.

Isotopic probes of the argininosuccinate lyase reaction

The mechanism of the argininosuccinate lyase reaction has been probed by the measurement of the effects of isotopic substitution at the reaction centers. A primary deuterium isotope effect of 1.0 on both V and V/K is obtained with (2S,3R)-argininosuccinate-3-d, while a primary 15N isotope effect on V/K of 0.9964 +/- 0.0003 is observed. The 15N isotope effect on the equilibrium constant is 1.018 +/- 0.001. The proton that is abstracted from C-3 of argininosuccinate is unable to exchange with the solvent from the enzyme-intermediate complex but is rapidly exchanged with solvent from the enzyme-fumarate-arginine complex. A deuterium solvent isotope effect of 2.0 is observed on the Vmax of the forward reaction. These and other data have been interpreted to suggest that argininosuccinate lyase catalyzes the cleavage of argininosuccinate via a carbanion intermediate. The proton abstraction step is not rate limiting, but the inverse 15N primary isotope effect and the solvent deuterium isotope effect suggest that protonation of the guanidino group and carbon-nitrogen bond cleavage of argininosuccinate are kinetically significant.