Adenosine 5'-O-(3-thiotriphosphate) can support the formation of an initiation complex between the DNA polymerase III holoenzyme and primed DNA

DNA replicases from a bacterial perspective

Bacterial replicases are complex, tripartite replicative machines. They contain a polymerase, polymerase III (Pol III), a β₂ processivity factor, and a DnaX complex ATPase that loads β₂ onto DNA and chaperones Pol III onto the newly loaded β₂. Bacterial replicases are highly processive, yet cycle rapidly during Okazaki fragment synthesis in a regulated way. Many bacteria encode both a full-length τ and a shorter γ form of DnaX by a variety of mechanisms. γ appears to be uniquely placed in a single position relative to two τ protomers in a pentameric ring. The polymerase catalytic subunit of Pol III, α, contains a PHP domain that not only binds to a prototypical ε Mg²⁺-dependent exonuclease, but also contains a second Zn²⁺-dependent proofreading exonuclease, at least in some bacteria. This review focuses on a critical evaluation of recent literature and concepts pertaining to the above issues and suggests specific areas that require further investigation.

Polymerase chaperoning and multiple ATPase sites enable the E. coli DNA polymerase III holoenzyme to rapidly form initiation complexes

Cellular replicases include three subassemblies: a DNA polymerase, a sliding clamp processivity factor, and a clamp loader complex. The Escherichia coli clamp loader is the DnaX complex (DnaX(3)δδ'χψ), where DnaX occurs either as τ or as the shorter γ that arises by translational frameshifting. Complexes composed of either form of DnaX are fully active clamp loaders, but τ confers important replicase functions including chaperoning the polymerase to the newly loaded clamp to form an initiation complex for processive replication. The kinetics of initiation complex formation were explored for DnaX complexes reconstituted with varying τ and γ stoichiometries, revealing that τ-mediated polymerase chaperoning accelerates initiation complex formation by 100-fold. Analyzing DnaX complexes containing one or more K51E variant DnaX subunits demonstrated that only one active ATP binding site is required to form initiation complexes, but the two additional sites increase the rate by ca 1000-fold. For τ-containing complexes, the ATP analogue ATPγS was found to support initiation complex formation at 1/1000th the rate with ATP. In contrast to previous models that proposed ATPγS drives hydrolysis-independent initiation complex formation by τ-containing complexes, the rate and stoichiometry of ATPγS hydrolysis coincide with those for initiation complex formation. These results show that although one ATPase site is sufficient for initiation complex formation, the combination of polymerase chaperoning and the binding and hydrolysis of three ATPs dramatically accelerates initiation complex formation to a rate constant (25-50 s(-1)) compatible with double-stranded DNA replication.

Chaperoning of a replicative polymerase onto a newly assembled DNA-bound sliding clamp by the clamp loader

Cellular replicases contain multiprotein ATPases that load sliding clamp processivity factors onto DNA. We reveal an additional role for the DnaX clamp loader: chaperoning of the replicative polymerase onto a clamp newly bound to DNA. We show that chaperoning confers distinct advantages, including marked acceleration of initiation complex formation. We reveal a requirement for the tau form of DnaX complex to relieve inhibition by single-stranded DNA binding protein during initiation complex formation. We propose that, after loading beta(2), DnaX complex preserves an SSB-free segment of DNA immediately downstream of the primer terminus and chaperones Pol III into that position, preventing competition by SSB. The C-terminal tail of SSB stimulates reactions catalyzed by tau-containing DnaX complexes through a contact distinct from the contact involving the chi subunit. Chaperoning of Pol III by the DnaX complex provides a molecular explanation for how initiation complexes form when supported by the nonhydrolyzed analog ATPgammaS.

Loading clamps for DNA replication and repair

Sliding clamps and clamp loaders were initially identified as DNA polymerase processivity factors. Sliding clamps are ring-shaped protein complexes that encircle and slide along duplex DNA, and clamp loaders are enzymes that load these clamps onto DNA. When bound to a sliding clamp, DNA polymerases remain tightly associated with the template being copied, but are able to translocate along DNA at rates limited by rates of nucleotide incorporation. Many different enzymes required for DNA replication and repair use sliding clamps. Clamps not only increase the processivity of these enzymes, but may also serve as an attachment point to coordinate the activities of enzymes required for a given process. Clamp loaders are members of the AAA+ family of ATPases and use energy from ATP binding and hydrolysis to catalyze the mechanical reaction of loading clamps onto DNA. Many structural and functional features of clamps and clamp loaders are conserved across all domains of life. Here, the mechanism of clamp loading is reviewed by comparing features of prokaryotic and eukaryotic clamps and clamp loaders.

Cellular DNA replicases: components and dynamics at the replication fork

DNA replicases are multicomponent machines that have evolved clever strategies to perform their function. Although the structure of DNA is elegant in its simplicity, the job of duplicating it is far from simple. At the heart of the replicase machinery is a heteropentameric AAA+ clamp-loading machine that couples ATP hydrolysis to load circular clamp proteins onto DNA. The clamps encircle DNA and hold polymerases to the template for processive action. Clamp-loader and sliding clamp structures have been solved in both prokaryotic and eukaryotic systems. The heteropentameric clamp loaders are circular oligomers, reflecting the circular shape of their respective clamp substrates. Clamps and clamp loaders also function in other DNA metabolic processes, including repair, checkpoint mechanisms, and cell cycle progression. Twin polymerases and clamps coordinate their actions with a clamp loader and yet other proteins to form a replisome machine that advances the replication fork.

Chromosomal replicases as asymmetric dimers: studies of subunit arrangement and functional consequences

Studies of the DNA polymerase III holoenzyme of Escherichia coli support a model in which both the leading and lagging strand polymerases are held together in a complex with the replicative helicase and priming activities, allowing two identical alpha catalytic subunits to assume different functions on the two strands of the replication fork. Creation of distinct functions for each of the two polymerases within the holoenzyme depends on the asymmetric character of the entire complex. The asymmetry of the holoenzyme is created by the DnaX complex, a heptamer that includes tau and gamma products of the dnaX gene. tau and gamma perform unique functions in the DnaX complex, and the interaction between alpha and tau appears to dictate the catalytic subunit's role in the replicative reaction. This review considers the properties of the DnaX complex including both tau and gamma, with the goal of understanding the properties of the replicase and its function in vivo. Recent studies in eukaryotic and other prokaryotic systems suggest that an asymmetric dimeric replicase may be universal. The leading and lagging strand polymerases may be distinct in some systems. For example, Pol e and Pol delta may function as distinct leading and lagging strand polymerases in eukaryotes, and PolC and DnaE may function as distinct leading and lagging strand polymerases in low GC content Gram-positive bacteria.

DNA polymerase III holoenzyme from Thermus thermophilus identification, expression, purification of components, and use to reconstitute a processive replicase

DNA replication in bacteria is performed by a specialized multicomponent replicase, the DNA polymerase III holoenzyme, that consist of three essential components: a polymerase, the beta sliding clamp processivity factor, and the DnaX complex clamp-loader. We report here the assembly of the minimal functional holoenzyme from Thermus thermophilus (Tth), an extreme thermophile. The minimal holoenzyme consists of alpha (pol III catalytic subunit), beta (sliding clamp processivity factor), and the essential DnaX (tau/gamma), delta and delta' components of the DnaX complex. We show with purified recombinant proteins that these five components are required for rapid and processive DNA synthesis on long single-stranded DNA templates. Subunit interactions known to occur in DNA polymerase III holoenzyme from mesophilic bacteria including delta-delta' interaction, deltadelta'-tau/gamma complex formation, and alpha-tau interaction, also occur within the Tth enzyme. As in mesophilic holoenzymes, in the presence of a primed DNA template, these subunits assemble into a stable initiation complex in an ATP-dependent manner. However, in contrast to replicative polymerases from mesophilic bacteria, Tth holoenzyme is efficient only at temperatures above 50 degrees C, both with regard to initiation complex formation and processive DNA synthesis. The minimal Tth DNA polymerase III holoenzyme displays an elongation rate of 350 bp/s at 72 degrees C and a processivity of greater than 8.6 kilobases, the length of the template that is fully replicated after a single association event.

A three-domain structure for the delta subunit of the DNA polymerase III holoenzyme delta domain III binds delta' and assembles into the DnaX complex

Using psi-BLAST, we have developed a method for identifying the poorly conserved delta subunit of the DNA polymerase III holoenzyme from all sequenced bacteria. This approach, starting with Escherichia coli delta, leads not only to the identification of delta but also to the DnaX and delta' subunits of the DnaX complex and other AAA(+)-class ATPases. This suggests that, although not an ATPase, delta is related structurally to the other subunits of the DnaX complex that loads the beta sliding clamp processivity factor onto DNA. To test this prediction, we aligned delta sequences with those of delta' and, using the start of delta' Domain III established from its x-ray crystal structure, predicted the juncture between Domains II and III of delta. This putative delta Domain III could be expressed to high levels, consistent with the prediction that it folds independently. delta Domain III, like Domain III of DnaX and delta', assembles by itself into a complex with the other DnaX complex components. Cross-linking studies indicated a contact of delta with the DnaX subunits. These observations are consistent with a model where two tau subunits and one each of the gamma, delta', and delta subunits mutually interact to form a pentameric functional core for the DnaX complex.

The delta and delta ' subunits of the DNA polymerase III holoenzyme are essential for initiation complex formation and processive elongation

delta and delta' are required for assembly of the processivity factor beta(2) onto primed DNA in the DNA polymerase III holoenzyme-catalyzed reaction. We developed protocols for generating highly purified preparations of delta and delta'. In holoenzyme reconstitution assays, delta' could not be replaced by delta, tau, or gamma, even when either of the latter were present at a 10,000-fold molar excess. Likewise, delta could not be replaced by delta', tau, or gamma. Bacterial strains bearing chromosomal knockouts of either the holA(delta) or holB(delta') genes were not viable, demonstrating that both delta and delta' are essential. Western blots of isolated initiation complexes demonstrated the presence of both delta and delta'. However, in the absence of chipsi and single-stranded DNA-binding protein, a stable initiation complex lacking deltadelta' was isolated by gel filtration. Lack of delta-delta' decreased the rate of elongation about 3-fold, and the extent of processive replication was significantly decreased. Adding back delta-delta' but not chipsi, delta, or delta' alone restored the diminished activity, indicating that in addition to being key components required for the beta loading activity of the DnaX complex, deltadelta' is present in initiation complex and is required for processive elongation.

The DNA polymerase III holoenzyme: an asymmetric dimeric replicative complex with leading and lagging strand polymerases

The DNA Polymerase III holoenzyme forms initiation complexes on primed DNA in an ATP-dependent reaction. We demonstrate that the nonhydrolyzable ATP analog, ATP gamma S, supports the formation of an isolable leading strand complex that loads and replicates the lagging strand only in the presence of ATP, beta, and the single-stranded DNA binding protein. The single endogenous DnaX complex within DNA polymerase III holoenzyme assembles beta onto both the leading and lagging strand polymerases by an ordered mechanism. The dimeric replication complex disassembles in the opposite order from which it assembled. Upon ATP gamma S-induced dissociation, the leading strand polymerase is refractory to disassembly allowing cycling to occur exclusively on the lagging strand. These results establish holoenzyme as an intrinsic asymmetric dimer with distinguishable leading and lagging strand polymerases.

Replisome assembly reveals the basis for asymmetric function in leading and lagging strand replication

The E. coli replicase, DNA polymerase III holoenzyme, contains two polymerases for replication of duplex DNA. The DNA strands are antiparallel requiring different modes of replicating the two strands: one is continuous (leading) while the other is discontinuous (lagging). The two polymerases within holoenzyme are generally thought to have asymmetric functions for replication of these two strands. This report finds that the two polymerases have equal properties, both are capable of replicating the more difficult lagging strand. Asymmetric action is, however, imposed by the helicase that encircles the lagging strand. The helicase contact defines the leading polymerase constraining it to a subset of actions, while leaving the other to cycle on the lagging strand. The symmetric actions of the two polymerases free holoenzyme to assemble into the replisome in either orientation without concern for a correct match to one or the other strand.

tau couples the leading- and lagging-strand polymerases at the Escherichia coli DNA replication fork

Synthesis of an Okazaki fragment occurs once every 1 or 2 s at the Escherichia coli replication fork. To account for the rapid recycling required of the lagging-strand polymerase, it has been proposed that it is held at the replication fork by protein-protein interactions with the leading-strand polymerase as part of a dimeric polymerase assembly. Solution studies showed that the replicative polymerase, the DNA polymerase III holoenzyme, was indeed a dimer with two catalytic cores held together by the tau subunit. However, the functionality of this arrangement at the replication fork has never been demonstrated. We showed previously that the lagging-strand polymerase acted processively during multiple rounds of Okazaki fragment synthesis, i.e. the same polymerase core assembly synthesized each and every fragment made by the fork. Using extreme dilution of active replication forks and the isolation of protein-DNA complexes capable of supporting coupled leading- and lagging-strand synthesis, we demonstrate here that this coupling of leading- and lagging-strand synthesis is, in fact, mediated by the tau subunit of the holoenzyme acting as a physical bridge between the core assemblies synthesizing the leading and lagging strands.

Escherichia coli DNA polymerase III holoenzyme subunits alpha, beta, and gamma directly contact the primer-template

Escherichia coli DNA polymerase III holoenzyme forms a stable initiation complex with RNA-primed template in the presence of ATP. To determine the linear arrangement of the holoenzyme subunits along the primer-template duplex region, we cross-linked holoenzyme to a series of photo-reactive primers. Site-specific photo-cross-linking revealed that the alpha, beta, and gamma subunits formed ATP-dependent contacts with the primer-template. The alpha-polymerase catalytic subunit covalently attached to nucleotide positions -3, -9, and -13 upstream of the primer terminus, with the most efficient adduct formation occurring at position -9. The gamma subunit contacted the primer at positions -13, -18, and -22, with the strongest gamma-primer interactions occurring at position -18. The beta subunit predominated in cross-linking at position -22. Thus, within the initiation complex, alpha contacts roughly the first 13 nucleotides upstream of the 3'-primer terminus followed by gamma at -18 and beta at -22, and the gamma subunit remains a part of the initiation complex, bridging the alpha and beta subunits. Analyses of the interaction of photo-activatible primer-templates with the preinitiation complex proteins (gamma-complex (gamma-delta-delta'-chi-psi) and beta subunit) revealed the gamma subunit within the preinitiation complex covalently attached to primer at position -3. However, addition of core DNA polymerase III to preinitiation complex, fully reconstituting holoenzyme resulted in replacement of gamma by alpha at the primer terminus. These data indicate that assembly of holoenzyme onto a primer-template can occur in distinct stages and results in a structural rearrangement during initiation complex formation.

Identification, molecular cloning and characterization of the gene encoding the chi subunit of DNA polymerase III holoenzyme of Escherichia coli

We have identified a previously reported open reading frame (ORF13) that maps between pepA and valS at 96.6 centisomes of the Escherichia coli genome as the structural gene for the chi subunit of DNA polymerase III holoenzyme. This conclusion is supported by a perfect match of the amino-terminal 24 residues of chi with the DNA sequence of ORF13 and a demonstration that ORF13 directs expression of a protein that co-migrates with authentic chi on SDS-polyacrylamide gels. ORF13, designated holC, was isolated from the E. coli chromosome and inserted into a tac promoter-based expression plasmid to direct production of the chi subunit to 5-7% of the total soluble protein. The 3' end of holC was sequenced to resolve discrepancies between two published versions.

Identification, isolation, and overexpression of the gene encoding the psi subunit of DNA polymerase III holoenzyme

The gene encoding the psi subunit of DNA polymerase III holoenzyme, holD, was identified and isolated by an approach in which peptide sequence data were used to obtain a DNA hybridization probe. The gene, which maps to 99.3 centisomes, was sequenced and found to be identical to a previously uncharacterized open reading frame that overlaps the 5' end of rimI by 29 bases, contains 411 bp, and is predicted to encode a protein of 15,174 Da. When expressed in a plasmid that also expressed holC, holD directed expression of the psi subunit to about 3% of total soluble protein.

The Escherichia coli DNA polymerase III holoenzyme contains both products of the dnaX gene, tau and gamma, but only tau is essential

The replicative polymerase of Escherichia coli, DNA polymerase III, consists of a three-subunit core polymerase plus seven accessory subunits. Of these seven, tau and gamma are products of one replication gene, dnaX. The shorter gamma is created from within the tau reading frame by a programmed ribosomal -1 frameshift over codons 428 and 429 followed by a stop codon in the new frame. Two temperature-sensitive mutations are available in dnaX. The 2016(Ts) mutation altered both tau and gamma by changing codon 118 from glycine to aspartate; the 36(Ts) mutation affected the activity only of tau because it altered codon 601 (from glutamate to lysine). Evidence which indicates that, of these two proteins, only the longer tau is essential includes the following. (i) The 36(Ts) mutation is a temperature-sensitive lethal allele, and overproduction of wild-type gamma cannot restore its growth. (ii) An allele which produced tau only could be substituted for the wild-type chromosomal gene, but a gamma-only allele could not substitute for the wild-type dnaX in the haploid state. Thus, the shorter subunit gamma is not essential, suggesting that tau can be substitute for the usual function(s) of gamma. Consistent with these results, we found that a functional polymerase was assembled from nine pure subunits in the absence of the gamma subunit. However, the possibility that, in cells growing without gamma, proteolysis of tau to form a gamma-like product in amounts below the Western blot (immunoblot) sensitivity level cannot be excluded.

Greater susceptibility to mutations in lagging strand of DNA replication in Escherichia coli than in leading strand

Models of DNA replication in Escherichia coli involve an asymmetric DNA polymerase complex that replicates concurrently the leading and the lagging strands of double-stranded DNA. The effect of asymmetry on mutagenesis was tested with pairs of plasmids containing the unidirectional ColE1 origin of replication and a single lesion located in the leading or lagging strand. The lesion used was the covalent adduct that the chemical carcinogen N-2-acetylaminofluorene (AAF) forms with the C-8 position of guanine. Whether SOS was induced or not, mutations arose at about a 20-fold higher frequency when the AAF adduct was located in the lagging strand than when in the leading strand.

Molecular cloning, sequencing, and overexpression of the structural gene encoding the delta subunit of Escherichia coli DNA polymerase III holoenzyme

Using an oligonucleotide hybridization probe, we have mapped the structural gene for the delta subunit of Escherichia coli DNA polymerase III holoenzyme to 14.6 centisomes of the chromosome. This gene, designated holA, was cloned and sequenced. The sequence of holA matches precisely four amino acid sequences obtained for the amino terminus of delta and three internal tryptic peptides. A holA-overproducing plasmid that directs the expression of delta up to 4% of the soluble protein was constructed. Sequence analysis of holA revealed a 1,029-bp open reading frame that encodes a protein with a predicted molecular mass of 38,703 Da. holA may reside downstream of rlpB in an operon, perhaps representing yet another link between structural genes for the DNA polymerase III holoenzyme and proteins involved in membrane biogenesis. These and other features are discussed in terms of genetic regulation of delta-subunit synthesis.

Interallelic complementation of dnaE(Ts) mutations

Some Escherichia coli dnaE(Ts) alleles will functionally complement in trans. The complementation is not due to copy number and is compatible with dimeric interaction.

The roles of DNA polymerases alpha and delta in DNA replication

The identities and precise roles of the DNA polymerase(s) involved in mammalian cell DNA replication are uncertain. Circumstantial evidence suggests that DNA polymerase alpha and at least one form of DNA polymerase delta, that which is stimulated by Proliferating Cell Nuclear Antigen, catalyze mammalian cell replicative DNA synthesis. Further, the in vitro properties of polymerases alpha and delta suggest a model for their coordinate action at the replication fork. The present paper summarizes the current status of DNA polymerases alpha and delta in DNA replication, and describes newly available approaches to the study of those enzymes.

The asymmetric dimeric polymerase hypothesis: a progress report

In 1983, my laboratory first proposed that the DNA polymerase III holoenzyme is an asymmetric dimer with distinguishable leading and lagging strand polymerases. Here, I review progress by my laboratory and others in testing this hypothesis. To date, the hypothesis is supported by our demonstration of (i) an asymmetry in function of two populations of holoenzyme in solution in their ability to use the ATP analog, ATP gamma S, to support initiation complex formation, (ii) the stabilization of a dimeric polymerase structure by the tau subunit, (iii) allosteric communication between polymerase halves and (iv) the coexistence of gamma and the tau, subunits which share common sequences, within the same holoenzyme assemblies. This latter observation may provide a structural basis for holoenzyme asymmetry. I discuss the implications of the asymmetric dimer hypothesis to the solution of problems encountered by polymerases at the replication fork and delineate further tests required before the hypothesis can be firmly established.

Sequence analysis of the Escherichia coli dnaE gene

We have determined the sequence of a 4,350-nucleotide region of the Escherichia coli chromosome that contains dnaE, the structural gene for the alpha subunit of DNA polymerase III holoenzyme. The dnaE gene appeared to be part of an operon containing at least three other genes: 5'-lpxB-ORF23-dnaE-ORF37-3' (ORF, open reading frame). The lpxB gene encodes lipid A disaccharide synthase, an enzyme essential for cell growth and division (M. Nishijima, C.E. Bulawa, and C.R.H. Raetz, J. Bacteriol. 145:113-121, 1981). The termination codons of lpxB and ORF23 overlapped the initiation codons of ORF23 and dnaE, respectively, suggesting translational coupling. No rho-independent transcription termination sequences were observed. A potential internal transcriptional promoter was found preceding dnaE. Deletion of the -35 region of this promoter abolished dnaE expression in plasmids lacking additional upstream sequences. From the deduced amino acid sequence, alpha had a molecular weight of 129,920 and an isoelectric point of 4.93 for the denatured protein. ORF23 encoded a more basic protein (pI 7.11) with a molecular weight of 23,228. In the accompanying paper (D.N. Crowell, W.S. Reznikoff, and C.R.H. Raetz, J. Bacteriol. 169:5727-5734, 1987), the sequence of the upstream region that contains lpxA and lpxB is reported.

Enzymology of DNA in replication in prokaryotes

This review stresses recent developments in the in vitro study of DNA replication in prokaryotes. New insights into the enzymological mechanisms of initiation and elongation of leading and lagging strand DNA synthesis in ongoing studies are emphasized. Data from newly developed systems, such as those replicating oriC containing DNA or which are dependent on the lambda, O, and P proteins, are presented and the information compared to existing mechanisms. Evidence bearing on the coupling of DNA synthesis on both parental strands through protein-protein interactions and on the turnover of the elongation systems are analyzed. The structure of replication origins, and how their tertiary structure affects recognition and interaction with the various replication proteins is discussed.