Molecular weight of beef heart aconitase and stoichiometry of the components of its iron-sulfur cluster

An EPR investigation of the products of the reaction of cytosolic and mitochondrial aconitases with nitric oxide

Cellular studies have indicated that some Fe-S proteins, and the aconitases in particular, are targets for nitric oxide. Specifically, NO has been implicated in the intracellular process of the conversion of active cytosolic aconitase containing a [4Fe-4S] cluster, to its apo-form which functions as an iron-regulatory protein. We have undertaken the in vitro study of the reaction of NO with purified forms of both mitochondrial and cytosolic aconitases by following enzyme activity and by observing the formation of EPR signals not shown by the original reactants. Inactivation by either NO solutions or NO-producing NONOates under anaerobic conditions is seen for both enzyme isoforms. This inactivation, which occurs in the presence or absence of substrate, is accompanied by the appearance of the g = 2.02 signals of the [3Fe-4S] clusters and the g approximately 2.04 signal of a protein-bound dinitrosyl-iron-dithiol complex in the d7 state. In addition, in the reaction of cytosolic aconitase, the transient formation of a thiyl radical, g parallel = 2.11 and g perpendicular = 2.03, is observed. Disassembly of the [3Fe-4S] clusters of the inactive forms of the enzymes upon the anaerobic addition of NO is also accompanied by the formation of the g approximately 2.04 species and in the case of mitochondrial aconitase, a transient signal at g approximately 2. 032 appeared. This signal is tentatively assigned to the d9 form of an iron-nitrosyl-histidyl complex of the mitochondrial protein. Inactivation of the [4Fe-4S] forms of both aconitases by either superoxide anion or peroxynitrite produces the g = 2.02 [3Fe-4S] proteins.

The aconitase of Escherichia coli. Nucleotide sequence of the aconitase gene and amino acid sequence similarity with mitochondrial aconitases, the iron-responsive-element-binding protein and isopropylmalate isomerases

The nucleotide sequence of the aconitase gene (acn) of Escherichia coli was determined and used to deduce the primary structure of the enzyme. The coding region comprises 2670 bp (890 codons excluding the start and stop codons) which define a product having a relative molecular mass of 97,513 and an N-terminal amino acid sequence consistent with those determined previously for the purified enzyme. The acn gene is flanked by the cysB gene and a putative riboflavin biosynthesis gene resembling the ribA gene of Bacillus subtilis. The 1004-bp cysB--acn intergenic region contains several potential promoter and regulatory sequences. The amino acid sequence of the E. coli aconitase is similar to the mitochondrial aconitases (27-29% identity) and the isopropylmalate isomerases (20-21% identity) but it is most similar to the human iron-responsive-element-binding protein (53% identity). The three cysteine residues involved in ligand binding to the [4Fe-4S] centre are conserved in all of these proteins. Of the remaining 17 active-site residues assigned for porcine aconitase, 16 are conserved in both the bacterial aconitase and the iron-responsive-element-binding protein and 14 in the isopropylmalate isomerases. It is concluded that the bacterial and mitochondrial aconitases, the isopropylmalate isomerases and the iron-responsive-element-binding protein form a family of structurally related proteins, which does not include the Fe-S-containing fumarases. These relationships raise the possibility that the iron-responsive-element-binding protein may be a cytoplasmic aconitase and that the E. coli aconitase may have an iron-responsive regulatory function.

19th Sir Hans Krebs lecture. Engineering of protein bound iron-sulfur clusters. A tool for the study of protein and cluster chemistry and mechanism of iron-sulfur enzymes

An increasing number of iron-sulfur (Fe-S) proteins are found in which the Fe-S cluster is not involved in net electron transfer, as it is in the majority of Fe-S proteins. Most of the former are (de)hydratases, of which the most extensively studied is aconitase. Approaches are described and discussed by which the Fe-S cluster of this enzyme could be brought into states of different structure, ligation, oxidation and isotope composition. The species, so obtained, provided the basis for spectroscopic and chemical investigations. Results from studies by protein chemistry, EPR, Mössbauer, 1H, 2H and 57Fe electron-nuclear double resonance spectroscopy are described. Conclusions, which bear on the electronic structure of the Fe-S cluster, enzyme-substrate interaction and the enzymatic mechanism, were derived from a synopsis of the recent work described here and of previous contributions from several laboratories. These conclusions are discussed and summarized in a final section.

The structure of aconitase

The crystal structure of the 80,000 Da Fe-S enzyme aconitase has been solved and refined at 2.1 A resolution. The protein contains four domains; the first three from the N-terminus are closely associated around the [3Fe-4S] cluster with all three cysteine ligands to the cluster being provided by the third domain. Association of the larger C-terminal domain with the first three domains creates an extensive cleft leading to the Fe-S cluster. Residues from all four domains contribute to the active site region, which is defined by the Fe-S cluster and a bound SO4(2-) ion. This region of the structure contains 4 Arg, 3 His, 3 Ser, 2 Asp, 1 Glu, 3 Asn, and 1 Gln residues, as well as several bound water molecules. Three of these side chains reside on a three-turn 3(10) helix in the first domain. The SO4(2-) ion is bound 9.3 A from the center of the [3Fe-4S] cluster by the side chains of 2 Arg and 1 Gln residues. Each of 3 His side chains in the putative active site is paired with Asp or Glu side chains.

Regulation of succinate dehydrogenase and tautomerization of oxaloacetate

Highly purified succinate-ubiquinone reductase catalyzes the oxidation of L- or D-malate with a Km and initial Vmax equal to approximately 10(-3) M and approximately 100 nmol/min/mg of protein, respectively. The malate dehydrogenase activity of succinate dehydrogenase rapidly decreases regardless of the presence of glutamate plus glutamate-oxaloacetate transaminase. The inhibitor trapping system, however, prevents the inactivation of succinate dehydrogenase under the conditions when the rate of tautomeric oxaloacetate enol in equilibrium oxaloacetate ketone interconversion is high. These results suggest that enol oxaloacetate is an immediate product of malate oxidation at the succinate dehydrogenase active site. Two proteins (Mr 37 and 80 kD) which catalyze the oxaloacetate tautomerase reaction were isolated from the mitochondrial matrix. Some physico-chemical and kinetic properties of these enzymes were characterized. The larger protein was identified as inactive aconitase. The system containing succinate dehydrogenase, L-malate, glutamate plus transaminase and oxaloacetate tautomerase was reconstituted. Such a system is capable of oxidizing malate to aspartate without rapid inactivation of succinate dehydrogenase. Taken together, the data obtained emphasize a significant role of enzymatic oxaloacetate tautomerization in the control of the succinate dehydrogenase activity in the mitochondrial matrix.

Purification of aconitase from Bacillus subtilis and correlation of its N-terminal amino acid sequence with the sequence of the citB gene

The DNA sequence for the promoter region of the Bacillus subtilis citB gene has been determined. Presumed "-10" and "-35" regions of the promoter have been identified, and transcriptional and translational start points of citB have been located. To correlate the DNA sequence of citB with the amino acid sequence of its presumed product, aconitase, it was necessary to devise a scheme for purification of this labile enzyme. This procedure relies on the ability to restore enzyme activity at each stage of purification by incubation in a reducing buffer containing a source of ferrous ions. B. subtilis aconitase appears to be a monomer with a molecular weight of approximately 120,000. The amino-terminal amino acids of aconitase fit the sequence predicted by analysis of the citB gene. Thus, citB codes for aconitase.

Isolation and biochemical characterization of maleic-acid hydratase, an iron-requiring hydro-lyase

A procedure for the isolation of maleic acid hydratase (D-malate hydro-lyase, EC 4.2.1.31) of about 95% purity from rabbit kidneys is described. The enzyme consists of a single polypeptide chain of 582 amino-acid residues with an approximate molecular mass of 68 kDa. The enzyme is very unstable and has an absolute requirement for chloride ions. Addition of sodium sulphide during the purification process was essential to maintain the enzyme in an activatable state. The pure preparation has low activity but responds to activation with Fe2+ ions, Na2S and a thiol. The sequence of adding the activating reagents is critical to achieve optimal activity. Ni2+ and to a lesser extent Co2+ can replace iron in the activation process. The enzyme incorporates 4-5 mol iron/mol and 4.5-6 mol sulphide/mol during activation. In this process an [Fe-S] cluster appears to be built up, as indicated by optical and electron paramagnetic resonance (EPR) spectroscopy. In activated samples exposed to air the [Fe-S] cluster is EPR-detectable through an axial signal with g = 2.01 and g = 2.029 whose temperature and power saturation characteristics were similar to those of other [3Fe-xS] clusters. The activated enzyme, however, is readily inactivated even upon minor manipulation with destruction of the iron-sulfur core.