Inhibition and resumption of processing of the staphylokinase in some Escherichia coli prlA suppressor mutants

The protein-conducting channel SecYEG

In bacteria, the translocase mediates the translocation of proteins into or across the cytosolic membrane. It consists of a membrane embedded protein-conducting channel and a peripherally associated motor domain, the ATPase SecA. The channel is formed by SecYEG, a multimeric protein complex that assembles into oligomeric forms. The structure and subunit composition of this protein-conducting channel is evolutionary conserved and a similar system is found in the endoplasmic reticulum of eukaryotes and the cytoplasmic membrane of archaea. The ribosome and other membrane proteins can associate with the protein-conducting channel complex and affect its activity or functionality.

Defective translocation of a signal sequence mutant in a prlA4 suppressor strain of Escherichia coli

In the accompanying paper [Adams, H., Scotti, P.A., de Cock, H., Luirink, J. & Tommassen, J. (2002) Eur. J. Biochem.269, 5564-5571], we showed that the precursor of outer-membrane protein PhoE of Escherichia coli with a Gly to Leu substitution at position -10 in the signal sequence (G-10L) is targeted to the SecYEG translocon via the signal-recognition particle (SRP) route, instead of via the SecB pathway. Here, we studied the fate of the mutant precursor in a prlA4 mutant strain. prlA mutations, located in the secY gene, have been isolated as suppressors that restore the export of precursors with defective signal sequences. Remarkably, the G-10L mutant precursor, which is normally exported in a wild-type strain, accumulated strongly in a prlA4 mutant strain. In vitro cross-linking experiments revealed that the precursor is correctly targeted to the prlA4 mutant translocon. However, translocation across the cytoplasmic membrane was defective, as appeared from proteinase K-accessibility experiments in pulse-labeled cells. Furthermore, the mutant precursor was found to accumulate when expressed in a secY40 mutant, which is defective in the insertion of integral-membrane proteins but not in protein translocation. Together, these data suggest that SecB and SRP substrates are differently processed at the SecYEG translocon.

SecY and integral membrane components of the Escherichia coli protein translocation system

Genetic approaches can address the question of how integral membrane Sec factors interact with each other and facilitate protein translocation across the cytoplasmic membrane of E. coli. This review summarizes genetic analyses of SecY, SecE and some other protein translocation factors, utilizing 'prl' mutations, 'sec' mutations, 'suppressor-directed inactivation', 'Sec titration', dominant negative mutations and their suppressors. Evidence suggests that co-ordinate participation of SecY, SecE, SecD, SecF, and probably some other factors, is crucial for the process.

Secretion of mutant leucine-specific binding proteins with internal deletions in Escherichia coli

The leucine-specific binding protein, encoded by the livK gene, is located in the periplasm of E. coli. The present study is an attempt to identify intragenic regions that determine the efficiency of its secretion into the periplasm. C-terminal deletions or fusions of the livK gene to trpA (encoding the alpha subunit of tryptophan synthetase) were secreted with little loss of efficiency [1]. A series of deletions was constructed at the unique Sphl site within livK, near the 5' end of the region coding for the mature protein. Between 16 and 113 amino acids were deleted in the amino-terminal one-third of the protein. A few of these deletions were located within a few amino acids of the signal sequence processing site. Deletions extending within thirteen residues of the processing site were processed and secreted more slowly than normal. Secondary structure predictions suggested that the alpha-helical core region of the signal sequence extends into the mature protein in the case of the slow processing mutants, perhaps interfering with the recognition site for leader peptidase or other secretory components. These results suggest that the conformation around the signal processing site may be a critical factor in determining the efficiency of secretion. During the course of this study, it was found that the difference in molecular weight between precursor and mature forms of some binding protein mutants, as judged by SDS-PAGE, was much greater than could be accounted for by processing of the signal sequence. This anomalous mobility on gels, however, could be eliminated by performing SDS-PAGE in the presence of 6 M urea.

Novel prlA alleles defective in supporting staphylokinase processing in Escherichia coli

A class of prlA (secY) alleles of Escherichia coli (prlA4-1 and prlA401) which specifically block the export of staphylokinase has been identified (T. Iino and T. Sako, J. Biol. Chem. 263:19077-19082, 1988; T. Sako and T. Iino, J. Bacteriol. 170:5389-5391, 1988). To determine more precisely the region in PrlA (SecY) effective for the blockage of processing of the staphylokinase precursor, additional prlA mutants which failed to support processing of the staphylokinase precursor were isolated. Two of the five mutant alleles isolated (secY121 and secY161) complemented the temperature sensitivity of a secY24 strain and had no detectable effect on the processing of endogenous secretory proteins of E. coli. In addition, a staphylokinase mutant having glycine in place of serine at position 17 in its signal sequence relieved the detrimental effect of these mutations. All of these characteristics indicate that these two alleles resemble the prlA4-1 and prlA401 alleles. On the other hand, the remaining three mutant alleles (secY47, secY105, and secY112) had no significant PrlA activity. The mutations of secY121 and secY161 were mapped very close to those of prlA4-1 and prlA401 in the presumed transmembrane segment 7 of PrlA. These results indicate that transmembrane segment 7 of PrlA plays a crucial role in the recognition of the staphylokinase signal sequence.

The sec and prl genes of Escherichia coli

Two general approaches have been used to define genetically the genes that encode components of the cellular protein export machinery. One of these strategies identifies mutations that confer a conditional-lethal, pleiotropic export defect (sec, secretion). The other identifies dominant suppressors of signal sequence mutations (prl, protein localization). Subsequent characterization reveals that in at least three cases, prlA/secY, prlD/secA, and prlG/secE, both types of mutations are found within the same structural gene. This convergence is satisfying and provides compelling evidence for direct involvement of these gene products in the export process.

Structure, function, and biogenesis of SecY, an integral membrane protein involved in protein export

The E. coli secY (prlA) gene, located in the operator-distal part of the spc ribosomal protein operon, codes for an integral membrane protein, SecY. The phenotypes of temperature-sensitive and cold-sensitive mutations in secY suggest that the SecY protein plays an essential role in vivo to facilitate protein translocation, whereas the prlA mutations in this gene suggest that SecY may interact with the signal sequence of translocating polypeptides. SecY contains most probably six cytoplasmic and five periplasmic domains, as well as 10 transmembrane segments. Such membrane-embedded structure may confer the SecY protein a "translocator" function, in which it provides a protein-aceous pathway for passage of secreted as well as membrane proteins. Results obtained by in vitro analyses of the translocation reactions, as well as some new phenotypes of the secY mutants, are consistent with this notion. Possible interaction of SecY with other secretion and chaperone-like factors is also discussed.

Export of the periplasmic maltose-binding protein of Escherichia coli

The export of the maltose-binding protein (MBP), the malE gene product, to the periplasm of Escherichia coli cells has been extensively investigated. The isolation of strains synthesizing MalE-LacZ hybrid proteins led to a novel genetic selection for mutants that accumulate export-defective precursor MBP (preMBP) in the cytoplasm. The export defects were subsequently shown to result from alterations in the MBP signal peptide. Analysis of these and a variety of mutants obtained in other ways has provided considerable insight into the requirements for an optimally functional MBP signal peptide. This structure has been shown to have multiple roles in the export process, including promoting entry of preMBP into the export pathway and initiating MBP translocation across the cytoplasmic membrane. The latter has been shown to be a late event relative to synthesis and can occur entirely posttranslationally, even many minutes after the completion of synthesis. Translocation requires that the MBP polypeptide exist in an export-competent conformation that most likely represents an unfolded state that is not inhibitory to membrane transit. The signal peptide contributes to the export competence of preMBP by slowing the rate at which the attached mature moiety folds. In addition, preMBP folding is thought to be further retarded by the binding of a cytoplasmic protein, SecB, to the mature moiety of nascent preMBP. In cells lacking this antifolding factor, MBP export represents a race between delivery of newly synthesized, export-competent preMBP to the translocation machinery in the cytoplasmic membrane and folding of preMBP into an export-incompetent conformation. SecB is one of three E. coli proteins classified as "molecular chaperones" by their ability to stabilize precursor proteins for membrane translocation.

SecY, a multispanning integral membrane protein, contains a potential leader peptidase cleavage site

SecY is an Escherichia coli integral membrane protein required for efficient translocation of other proteins across the cytoplasmic membrane; it is embedded in this membrane by the 10 transmembrane segments. Among several SecY-alkaline phosphatase (PhoA) fusion proteins that we constructed previously, SecY-PhoA fusion 3-3, in which PhoA is fused to the third periplasmic region of SecY just after the fifth transmembrane segment, was found to be subject to rapid proteolytic processing in vivo. Both the SecY and PhoA products of this cleavage have been identified immunologically. In contrast, cleavage of SecY-PhoA 3-3 was barely observed in a lep mutant with a temperature-sensitive leader peptidase. The full-length fusion protein accumulated in this mutant was cleaved in vitro by the purified leader peptidase. A sequence Ala-202-Ile-Ala located near the proposed interface between transmembrane segment 5 and periplasmic domain 3 of SecY was found to be responsible for the recognition and cleavage by the leader peptidase, since a mutated fusion protein with Phe-Ile-Phe at this position was no longer cleaved even in the wild-type cells. These results indicate that SecY contains a potential leader peptidase cleavage site that undergoes cleavage if the PhoA sequence is attached carboxy terminally. Thus, transmembrane segment 5 of SecY can fulfill both of the two important functions of the signal peptide, translocation and cleavage, although the latter function is cryptic in the normal SecY protein.

Analysis of mutational alterations in the hydrophilic segment of the maltose-binding protein signal peptide

Oligonucleotide-directed mutagenesis was employed to investigate the role of the hydrophilic segment of the Escherichia coli maltose-binding protein (MBP) signal peptide in the protein export process. The three basic residues residing at the amino terminus of the signal peptide were systematically substituted with neutral or acidic residues, decreasing the net charge in a stepwise fashion from +3 to -3. It was found that a net positive charge was not absolutely required for MBP export to the periplasm. However, export was most rapid and efficient when the signal peptide retained at least a single basic residue and a net charge of +1. The nature of the adjacent hydrophobic core helped to determine the effect of charge changes in the hydrophilic segment on MBP export, which suggested that these two regions of the signal peptide do not have totally distinct functions. Although the stepwise decrease in net charge of the signal peptide also resulted in a progressive decrease in the level of MBP synthesis, the data do not readily support a model in which MBP synthesis and export are obligately coupled events. The export defect resulting from alterations in the hydrophilic segment was partially suppressed in strains harboring certain prl alleles but not in strains harboring prlA alleles that are highly efficient suppressors of signal sequence mutations that alter the hydrophobic core.