Construction and properties of bifunctionally active membrane-bound fusion proteins. Escherichia coli proline carrier linked with beta-galactosidase

Fusing two cytochromes b of Rhodobacter capsulatus cytochrome bc1 using various linkers defines a set of protein templates for asymmetric mutagenesis

Cytochrome bc₁ (mitochondrial complex III), one of the key enzymes of biological energy conversion, is a functional homodimer in which each monomer contains three catalytic subunits: cytochrome c₁, the iron–sulfur subunit and cytochrome b. The latter is composed of eight transmembrane α-helices which, in duplicate, form a hydrophobic core of a dimer. We show that two cytochromes b can be fused into one 16-helical subunit using a number of different peptide linkers that vary in length but all connect the C-terminus of one cytochrome with the N-terminus of the other. The fusion proteins replace two cytochromes b in the dimer defining a set of available protein templates for introducing mutations that allow breaking symmetry of a dimer. A more detailed comparison of the form with the shortest, 3 amino acid, linker to the form with 12 amino acid linker established that both forms display similar level of structural plasticity to accommodate several, but not all, asymmetric patterns of mutations that knock out individual segments of cofactor chains. While the system based on a fused gene does not allow for the assessments of the functionality of electron-transfer paths in vivo, the family of proteins with fused cytochrome b offers attractive model for detailed investigations of molecular mechanism of catalysis at in vitro/reconstitution level.

Role of Asp187 and Gln190 in the Na+/proline symporter (PutP) of Escherichia coli

Asp187 and Gln190 were predicted as conserved and closely located at the Na(+) binding site in a topology and homology model structure of Na(+)/proline symporter (PutP) of Escherichia coli. The replacement of Asp187 with Ala or Leu did not affect proline transport activity; whereas, change to Gln abolished the active transport. The binding affinity for Na(+) or proline of these mutants was similar to that of wild-type (WT) PutP. This result indicates Asp187 to be responsible for active transport of proline without affecting the binding. Replacement of Gln190 with Ala, Asn, Asp, Leu and Glu had no effect on transport or binding, suggesting that it may not have a role in the transport. However, in the negative D187Q mutant, a second mutation, of Gln190 to Glu or Leu, restored 46 or 7% of the transport activity of WT, respectively, while mutation to Ala, Asn or Asp had no effect. Thus, side chain at position 190 has a crucial role in suppressing the functional defect of the D187Q mutant. We conclude that Asp187 is responsible for transport activity instead of coupling-ion binding by constituting the translocation pathway of the ion and Gln190 provides a suppressing mutation site to regain PutP functional activity.

Improvement of downstream processing of recombinant proteins by means of genetic engineering methods

The rapid advancement of genetic engineering has allowed to produce an impressive number of proteins on a scale which would not have been achieved by classical biotechnology. At the beginning of this development research was focussed on elucidating the mechanisms of protein overexpression. The appearance of inclusion bodies may illustrate the success. In the meantime, genetic engineering is not only expected to achieve overexpression, but to improve the whole process of protein production. For downstream processing of recombinant proteins, the synthesis of fusion proteins is of primary importance. Fusion with certain proteins or peptides may protect the target protein from proteolytic degradation and may alter its solubility. Intracellular proteins may be translocated by means of fusions with signal peptides. Affinity tags as fusion complements may render protein separation and purification highly selective. These methods as well as similar ones for improving the downstream processing of proteins will be discussed on the basis of recent literature.

Sodium-substrate cotransport in bacteria

A variety of sodium-substrate cotransport systems are known in bacteria. Sodium enters the cell down an electrochemical concentration gradient. There is obligatory coupling between the entry of the ion and the entry of substrate with a stoichiometry (in the cases studied) of 1:1. Thus, the downhill movement of sodium ion into the cell leads to the accumulation of substrate within the cell. The melibiose carrier of Escherichia coli is perhaps the most carefully studied of the sodium cotransport systems in bacteria. This carrier is of special interest because it can also use protons or lithium ions for cotransport. Other sodium cotransport carriers that have been studied recently are for proline, glutamate, serine-threonine, citrate and branched chain amino acids.

Unidirectional reconstitution and characterization of purified Na+/proline transporter of Escherichia coli

A simple approach for large-scale purification and unidirectional reconstitution of the Na+/proline transporter of Escherichia coli (PutP) is described. The procedure is based on the insertion of a highly polar peptide composed of 17 amino acids including a 6His tag at the C-terminus of the transporter. Purification of the hybrid protein is achieved by Ni+-NTA affinity (purity >95%) and ion exchange chromatography (purity >99%). The purified transporter is reconstituted into preformed, detergent-destabilized liposomes. Detergent is removed slowly by adsorption to polystyrene beads. The highest activities [Vmax = 1.1 x 10(3) nmol min-1 (mg of protein)-1] are measured when Triton X100 is used for liposomes destabilization at a concentration corresponding to the onset of lipid solubilization. Site-directed labeling of PutP and site-specific proteolytic cleavage indicate that the transporter is inserted into proteoliposomes in an inside-out orientation. Reconstituted PutP is able to accumulate proline against a concentration gradient in the presence of an inwardly directed electrochemical Na+ or Li+ gradient, while a pH gradient does not affect transport. The apparent proline affinity of PutP in proteoliposomes is similar to the value determined with intact cells. Interestingly however, the apparent Na+ affinity of reconstituted PutP is reduced by a factor of about 25 compared to cells, suggesting a lower cation affinity on the cytosolic side of PutP relative to the outside.

Overexpression of integral membrane proteins for structural studies

Determination of the structure of integral membrane proteins is a challenging task that is essential to understand how fundamental biological processes (such as photosynthesis, respiration and solute translocation) function at the atomic level. Crystallisation of membrane proteins in 3D has led to the determination of four atomic resolution structures [photosynthetic reaction centres (Allenet al. 1987; Changet al. 1991; Deisenhofer & Michel, 1989; Ermleret al. 1994); porins (Cowanet al. 1992; Schirmeret al. 1995; Weisset al. 1991); prostaglandin H2synthase (Picotet al. 1994); light harvesting complex (McDermottet al. 1995)], and crystals of membrane proteins formed in the plane of the lipid bilayer (2D crystals) have produced two more structures [bacteriorhodopsin (Hendersonet al. 1990); light harvesting complex (Kühlbrandtet al. 1994)].

Parameters influencing the productivity of recombinant E. coli cultivations

In the past 10 to 15 years, many of the promises of microbial genetic engineering have been realized: the use of recombinant Escherichia coli has moved from the laboratory to the production facility, and the manufacture of therapeutic recombinant proteins such as human growth hormone and interleukins is a rapidly growing industry. Along with this progress, however, have come new problems to solve: bioreactor operators have discovered that large-scale cultivations of plasmid-containing bacteria do not behave in exactly the same way as those of plasmid-free cells, plasmid stability has been recognized as a major hurdle, and the protein product might not be present in a soluble form but rather as intracellular granules that resist solubilization. These and other difficulties represent a new generation of challenges for genetic engineering. However, genetic engineering can do more than solve these problems. Molecular biological techniques also have the ability to create new opportunities: to produce new compounds, to use cheaper substrates, to facilitate downstream processing, and to optimize production in new ways. The productivity of a cultivation can generally be expressed as the product of the cell density and the specific biological activity. Both of these parameters are influenced by a variety of factors. For recombinant cultivations, though, the level of biological activity, a reflection of the plasmid copy number and expression efficiency, is the more interesting and important consideration and will therefore be given more attention in our review. In this contribution, our general goal is to discuss the factors that influence the productivity of recombinant E. coli cultivations, covering parameters relating to DNA; parameters relating to protein synthesis; parameters relating to proteins; and parameters relating to downstream processing. The object is not to tell the reader how to choose the perfect plasmid, host, and cultivation conditions, but to make known the many variables involved in designing a recombinant process and to point out recent and potential advances made possible by genetic engineering. The discussion focuses on the production of a protein, but many of the same concepts apply to other cultivations of recombinant E. coli, including cases in which the desired product is not a protein or the cells have been designed for a special metabolic capability such as pollutant biodegradation.

Sodium ion and proline binding sites in the Na+/proline symport carrier of Escherichia coli

Proline binding activity of the Escherichia coli Na+/proline symport carrier is inhibited by a sulfhydryl reagent, N-ethylmaleimide (NEM). Proline and its analogs protected the carrier against the NEM-inactivation in a Na+ (or Li+)-dependent manner. Na+ alone, even in the absence of proline, partially protected it from the NEM-inactivation. Mutant proline carriers, CS281, CS344 and CS349, which have a serine residue in place of Cys-281, Cys-344 and Cys-349, respectively (Yamato, I. and Anraku, Y. (1988) J. Biol. Chem. 263, 16055-16057) were also analyzed for cation-dependent proline binding and NEM-sensitivity. Proline binding activities of CS281 and CS344 were almost completely resistant to NEM, whereas that of CS349 was not. Furthermore, the proline binding activity of CS344 was remarkably lower than those of the wild-type, CS281 and CS349 carriers. These results indicate that Cys-344, which is located in the putative eighth membrane-spanning domain in the carrier, is a cysteine residue functionally involved in the high-affinity binding for sodium ion and proline.

Construction and properties of a triprotein containing the high-affinity nickel transporter of Alcaligenes eutrophus

The high-affinity nickel transporter of Alcaligenes eutrophus H16 is encoded by gene hoxN, which maps within the hydrogenase gene cluster of megaplasmid pHG1. A tripartite gene fusion was constructed, consisting of (i) the Escherichia coli lacZ gene for beta-galactosidase, (ii) a segment encoding an endoproteolytically cleavable peptide, and (iii) the A. eutrophus gene hoxN. An E. coli strain harboring this construct (plasmid pCH307) efficiently produced the corresponding triprotein upon induction. A broad-host-range derivative of pCH307 was shown to complement an A. eutrophus HoxN- mutant.

Mechanism of Na+/proline symport in Escherichia coli: reappraisal of the effect of cation binding to the Na+/proline symport carrier

The proton and sodium ion dependences of the proline binding and transport activities of the proline carrier in Escherichia coli were investigated in detail. The binding activity in cytoplasmic membrane vesicles from a carrier over-producing strain (PT21/pTMP5) was absolutely dependent on the presence of Na+, but did not necessarily require protonation of the carrier, in contrast to the model previously reported (Mogi, T., Anraku, Y. 1984. J. Biol. Chem. 259:7797-7801). Based on this and previous observations, we propose a modified model of the proline binding reaction of the proline carrier, in which a proton is supposed to be a regulatory factor for the binding activity. The apparent Michaelis constant of proline (Kt) of the transport activity of cytoplasmic membrane vesicles from the wild type E. coli strain driven by a respiratory substrate, ascorbate, showed dependence on a low concentration of sodium ion. The Michaelis constant of sodium ion for transport (KtNa) was estimated to be 25 microM. The proline transport activities in membrane vesicles and intact cells were modulated by H+ concentration, the inhibitory effect of protons (pKa approximately equal to 6) being similar to that observed previously (Mogi, T., Anraku, Y. 1984. J. Biol. Chem. 259:7802-7806). Based on these observations and the modified model of substrate binding to the proline carrier, a model of the proline/Na+ symport mechanism is proposed, in which a proton is postulated to be a regulatory factor of the transport activity.

Production of human adrenocorticotropin by cleavage of alkaline-phosphatase-derived fusion proteins containing repetitive recognition sequences for collagenases

Recombinant plasmids coding for fusion proteins which consist of human adrenocorticotropin joined to N-terminal sequences of Escherichia coli alkaline phosphatase via collagenase-sensitive linkers were constructed and used for the production of these proteins by transformed E. coli cells. It was shown that repetitive linkers of the form -Gly-(Pro-Xaa-Gly)n-Pro- with n greater than or equal to 2 were cleaved by clostridiopeptidase A (Clostridium histolyticum) by orders of magnitude faster than corresponding nonrepetitive sequences (n = 1). The C-terminal cleavage product was Gly-Pro-adrenocorticotropin which could be converted to the authentic hormone by dipeptidyl peptidase IV. On the basis of these enzymatic reactions a procedure for the preparation of pure adrenocorticotropin was developed. Derivatives of alkaline phosphatase containing similar repetitive linker sequences were cleaved by clostridiopeptidase A as efficiently as the adrenocorticotropin fusion proteins.

Molecular cloning of gltS and gltP, which encode glutamate carriers of Escherichia coli B

Two genes encoding distinct glutamate carrier proteins of Escherichia coli B were cloned into an E. coli K-12 strain by using a cosmid vector, pHC79. One of them was the gltS gene coding for a glutamate carrier of an Na+-dependent, binding protein-independent, and glutamate-specific transport system. The content of the glutamate carrier was amplified about 25-fold in the cytoplasmic membranes from a gltS-amplified strain. The gltS gene was located in a 3.2-kilobase EcoRI-MluI fragment, and the gene product was identified as a membrane protein with an apparent Mr of 35,000 in a minicell system. A gene designated gltP was also cloned. The transport activity of the gltP system in cytoplasmic membrane vesicles from a gltP-amplified strain was driven by respiratory substrates and was independent of the concentrations of Na+, K+, and Li+. An uncoupler, carbonylcyanide m-chlorophenylhydrazone, completely inhibited the transport activities of both systems, whereas an ionophore, monensin, inhibited only that of the gltS system. The Kt value for glutamate was 11 microM in the gltP system and 3.5 microM in the gltS system. L-Aspartate inhibited the glutamate transport of the gltP system but not that of the gltS system. Aspartate was taken up actively by membrane vesicles from the gltP-amplified strain, although no aspartate uptake activity was detected in membrane vesicles from a wild-type E. coli strain. These results suggest that gltP is a structural gene for a carrier protein of an Na+-independent, binding protein-independent glutamate-aspartate transport system.

Proline porters effect the utilization of proline as nutrient or osmoprotectant for bacteria

Proline is utilized by all organisms as a protein constituent. It may also serve as a source of carbon, energy and nitrogen for growth or as an osmoprotectant. The molecular characteristics of the proline transport systems which mediate the multiple functions of proline in the Gram negative enteric bacteria, Escherichia coli and Salmonella typhimurium, are now becoming apparent. Recent research on those organisms has provided both protocols for the genetic and biochemical characterization of the enzymes mediating proline transport and molecular probes with which the degree of homology among the proline transport systems of archaebacteria, eubacteria and eukaryotes can be assessed. This review has provided a detailed summary of recent research on proline transport in E. coli and S. typhimurium; the properties of other organisms are cited primarily to illustrate the generality of those observations and to show where homologous proline transport systems might be expected to occur. The characteristics of proline transport in eukaryotic microorganisms have recently been reviewed (Horak, 1986).

Topogenic signals in integral membrane proteins

Integral membrane proteins are characterized by long apolar segments that cross the lipid bilayer. Polar domains flanking these apolar segments have a more balanced amino acid composition, typical for soluble proteins. We show that the apolar segments from three different kinds of membrane-assembly signals do not differ significantly in amino acid content, but that the inside/outside location of the polar domains correlates strongly with their content of arginyl and lysyl residues, not only for bacterial inner-membrane proteins, but also for eukaryotic.proteins from the endoplasmic reticulum, the plasma membrane, the inner mitochondrial membrane, and the chloroplast thylakoid membrane. A positive-inside rule thus seems to apply universally to all integral membrane proteins, with apolar regions targeting for membrane integration and charged residues providing the topological information.

Solubilization and reconstitution of proline carrier in Escherichia coli; quantitative analysis and optimal conditions

Proline carrier of Escherichia coli was extracted from the carrier-overproducing membranes with dodecylmaltoside in the presence of phospholipid. The solubilized carrier showed the same proline binding activity as that in normal membranes. As judged from determinations of the binding activity in the micellar state as a marker of active carrier and the radioactivity of N-[ethyl-2-3H]ethylmaleimide-labeled carrier as a marker of carrier polypeptide, 80% of the carrier molecules in the membranes were extracted. Optimal conditions for reconstitution of the solubilized carrier were established. By a combination of freeze-thawing, sonication and dilution procedures, 70% of the solubilized carrier molecules were incorporated into proteoliposomes and the restored active transport of proline showed an apparent Kt of 1 microM and turnover number of 0.6 s-1. The transport of proline was driven by a membrane potential in a Na+ (or Li+)-dependent manner.