The 44P Subunit of the T4 DNA Polymerase Accessory Protein Complex Catalyzes ATP Hydrolysis

RNA primer-primase complexes serve as the signal for polymerase recycling and Okazaki fragment initiation in T4 phage DNA replication

The opposite strand polarity of duplex DNA necessitates that the leading strand is replicated continuously whereas the lagging strand is replicated in discrete segments known as Okazaki fragments. The lagging-strand polymerase sometimes recycles to begin the synthesis of a new Okazaki fragment before finishing the previous fragment, creating a gap between the Okazaki fragments. The mechanism and signal that initiate this behavior-that is, the signaling mechanism-have not been definitively identified. We examined the role of RNA primer-primase complexes left on the lagging ssDNA from primer synthesis in initiating early lagging-strand polymerase recycling. We show for the T4 bacteriophage DNA replication system that primer-primase complexes have a residence time similar to the timescale of Okazaki fragment synthesis and the ability to block a holoenzyme synthesizing DNA and stimulate the dissociation of the holoenzyme to trigger polymerase recycling. The collision with primer-primase complexes triggering the early termination of Okazaki fragment synthesis has distinct advantages over those previously proposed because this signal requires no transmission to the lagging-strand polymerase through protein or DNA interactions, the mechanism for rapid dissociation of the holoenzyme is always collision, and no unique characteristics need to be assigned to either identical polymerase in the replisome. We have modeled repeated cycles of Okazaki fragment initiation using a collision with a completed Okazaki fragment or primer-primase complexes as the recycling mechanism. The results reproduce experimental data, providing insights into events related to Okazaki fragment initiation and the overall functioning of DNA replisomes.

Coordinated DNA Replication by the Bacteriophage T4 Replisome

The T4 bacteriophage encodes eight proteins, which are sufficient to carry out coordinated leading and lagging strand DNA synthesis. These purified proteins have been used to reconstitute DNA synthesis in vitro and are a well-characterized model system. Recent work on the T4 replisome has yielded more detailed insight into the dynamics and coordination of proteins at the replication fork. Since the leading and lagging strands are synthesized in opposite directions, coordination of DNA synthesis as well as priming and unwinding is accomplished by several protein complexes. These protein complexes serve to link catalytic activities and physically tether proteins to the replication fork. Essential to both leading and lagging strand synthesis is the formation of a holoenzyme complex composed of the polymerase and a processivity clamp. The two holoenzymes form a dimer allowing the lagging strand polymerase to be retained within the replisome after completion of each Okazaki fragment. The helicase and primase also form a complex known as the primosome, which unwinds the duplex DNA while also synthesizing primers on the lagging strand. Future studies will likely focus on defining the orientations and architecture of protein complexes at the replication fork.

Engineering processive DNA polymerases with maximum benefit at minimum cost

DNA polymerases need to be engineered to achieve optimal performance for biotechnological applications, which often require high fidelity replication when using modified nucleotides and when replicating difficult DNA sequences. These tasks are achieved for the bacteriophage T4 DNA polymerase by replacing leucine with methionine in the highly conserved Motif A sequence (L412M). The costs are minimal. Although base substitution errors increase moderately, accuracy is maintained for templates with mono- and dinucleotide repeats while replication efficiency is enhanced. The L412M substitution increases intrinsic processivity and addition of phage T4 clamp and single-stranded DNA binding proteins further enhance the ability of the phage T4 L412M-DNA polymerase to replicate all types of difficult DNA sequences. Increased pyrophosphorolysis is a drawback of increased processivity, but pyrophosphorolysis is curbed by adding an inorganic pyrophosphatase or divalent metal cations, Mn²⁺ or Ca²⁺. In the absence of pyrophosphorolysis inhibitors, the T4 L412M-DNA polymerase catalyzed sequence-dependent pyrophosphorolysis under DNA sequencing conditions. The sequence specificity of the pyrophosphorolysis reaction provides insights into how the T4 DNA polymerase switches between nucleotide incorporation, pyrophosphorolysis and proofreading pathways. The L-to-M substitution was also tested in the yeast DNA polymerases delta and alpha. Because the mutant DNA polymerases displayed similar characteristics, we propose that amino acid substitutions in Motif A have the potential to increase processivity and to enhance performance in biotechnological applications. An underlying theme in this chapter is the use of genetic methods to identify mutant DNA polymerases with potential for use in current and future biotechnological applications.

Conformational analysis of processivity clamps in solution demonstrates that tertiary structure does not correlate with protein dynamics

The relationship between protein sequence, structure, and dynamics has been elusive. Here, we report a comprehensive analysis using an in-solution experimental approach to study how the conservation of tertiary structure correlates with protein dynamics. Hydrogen exchange measurements of eight processivity clamp proteins from different species revealed that, despite highly similar three-dimensional structures, clamp proteins display a wide range of dynamic behavior. Differences were apparent both for structurally similar domains within proteins and for corresponding domains of different proteins. Several of the clamps contained regions that underwent local unfolding with different half-lives. We also observed a conserved pattern of alternating dynamics of the α helices lining the inner pore of the clamps as well as a correlation between dynamics and the number of salt bridges in these α helices. Our observations reveal that tertiary structure and dynamics are not directly correlated and that primary structure plays an important role in dynamics.

Direct observation of stalled fork restart via fork regression in the T4 replication system

The restart of a stalled replication fork is a major challenge for DNA replication. Depending on the nature of the damage, different repair processes might be triggered; one is template switching, which is a bypass of a leading-strand lesion via fork regression. Using magnetic tweezers to study the T4 bacteriophage enzymes, we have reproduced in vitro the complete process of template switching. We show that the UvsW DNA helicase in cooperation with the T4 holoenzyme can overcome leading-strand lesion damage by a pseudostochastic process, periodically forming and migrating a four-way Holliday junction. The initiation of the repair process requires partial replisome disassembly via the departure of the replicative helicase. The results support the role of fork regression pathways in DNA repair.

Clamp loader ATPases and the evolution of DNA replication machinery

Clamp loaders are pentameric ATPases of the AAA+ family that operate to ensure processive DNA replication. They do so by loading onto DNA the ring-shaped sliding clamps that tether the polymerase to the DNA. Structural and biochemical analysis of clamp loaders has shown how, despite differences in composition across different branches of life, all clamp loaders undergo the same concerted conformational transformations, which generate a binding surface for the open clamp and an internal spiral chamber into which the DNA at the replication fork can slide, triggering ATP hydrolysis, release of the clamp loader, and closure of the clamp round the DNA. We review here the current understanding of the clamp loader mechanism and discuss the implications of the differences between clamp loaders from the different branches of life.

Mechanism of strand displacement synthesis by DNA replicative polymerases

Replicative holoenzymes exhibit rapid and processive primer extension DNA synthesis, but inefficient strand displacement DNA synthesis. We investigated the bacteriophage T4 and T7 holoenzymes primer extension activity and strand displacement activity on a DNA hairpin substrate manipulated by a magnetic trap. Holoenzyme primer extension activity is moderately hindered by the applied force. In contrast, the strand displacement activity is strongly stimulated by the applied force; DNA polymerization is favoured at high force, while a processive exonuclease activity is triggered at low force. We propose that the DNA fork upstream of the holoenzyme generates a regression pressure which inhibits the polymerization-driven forward motion of the holoenzyme. The inhibition is generated by the distortion of the template strand within the polymerization active site thereby shifting the equilibrium to a DNA-protein exonuclease conformation. We conclude that stalling of the holoenzyme induced by the fork regression pressure is the basis for the inefficient strand displacement synthesis characteristic of replicative polymerases. The resulting processive exonuclease activity may be relevant in replisome disassembly to reset a stalled replication fork to a symmetrical situation. Our findings offer interesting applications for single-molecule DNA sequencing.

Collaborative coupling between polymerase and helicase for leading-strand synthesis

Rapid and processive leading-strand DNA synthesis in the bacteriophage T4 system requires functional coupling between the helicase and the holoenzyme, consisting of the polymerase and trimeric clamp loaded by the clamp loader. We investigated the mechanism of this coupling on a DNA hairpin substrate manipulated by a magnetic trap. In stark contrast to the isolated enzymes, the coupled system synthesized DNA at the maximum rate without exhibiting fork regression or pauses. DNA synthesis and unwinding activities were coupled at low forces, but became uncoupled displaying separate activities at high forces or low dNTP concentration. We propose a collaborative model in which the helicase releases the fork regression pressure on the holoenzyme allowing it to adopt a processive polymerization conformation and the holoenzyme destabilizes the first few base pairs of the fork thereby increasing the efficiency of helicase unwinding. The model implies that both enzymes are localized at the fork, but does not require a specific interaction between them. The model quantitatively reproduces homologous and heterologous coupling results under various experimental conditions.

Isothermal DNA amplification using the T4 replisome: circular nicking endonuclease-dependent amplification and primase-based whole-genome amplification

In vitro reconstitution of the bacteriophage T4 replication machinery provides a novel system for fast and processive isothermal DNA amplification. We have characterized this system in two formats: (i) in circular nicking endonuclease-dependent amplification (cNDA), the T4 replisome is supplemented with a nicking endonuclease (Nb.BbvCI) and a reverse primer to generate a well-defined uniform double-stranded linear product and to achieve up to 1100-fold linear amplification of a plasmid in 1 h. (ii) The T4 replisome with its primase (gp61) can also support priming and exponential amplification of genomic DNA in primase-based whole-genome amplification (T4 pWGA). Low amplification biases between 4.8 and 9.8 among eight loci for 0.3–10 ng template DNA suggest that this method is indeed suitable for uniform whole-genome amplification. Finally, the utility of the T4 replisome for isothermal DNA amplification is demonstrated in various applications, including incorporation of functional tags for DNA labeling and immobilization; template generation for in vitro transcription/translation and sequencing; and colony screening and DNA quantification.

Multiple ATP binding is required to stabilize the "activated" (clamp open) clamp loader of the T4 DNA replication complex

Most DNA replication systems include a sliding clamp that encircles the genomic DNA and links the polymerase to the template to control polymerase processivity. A loading complex is required to open the clamp and place it onto the DNA. In phage T4 this complex consists of a trimeric clamp of gp45 subunits and a pentameric loader assembly of four gp44 and one gp62 subunit(s), with clamp loading driven by ATP binding. We measure this binding as a function of input ligand concentration and show that four ATPs bind to the gp44/62 complex with equal affinity. In contrast, the ATPase rate profile of the clamp-clamp loader complex exhibits a marked peak at an input ATP concentration close to the overall Kd (approximately 30 microm), with further increases in bound ATP decreasing the ATPase rate to a much lower level. Thus the progressive binding of the four ATPs triggers a conformational change in the complex that markedly inhibits ATPase activity. This inhibition is related to ring opening by using a clamp that is covalently cross-linked across its subunit interfaces and thus rendered incapable of opening. Binding of this clamp abolishes substrate inhibition of the ATPase but leaves ATP binding unchanged. We show that four ATP ligands must bind to the T4 clamp loader before the loader can be fully "activated" and the clamp opened, and that ATP hydrolysis is required only for release of the loader complex after clamp loading onto the replication fork has been completed.

The replication clamp-loading machine at work in the three domains of life

Sliding clamps are ring-shaped proteins that tether DNA polymerases to DNA, which enables the rapid and processive synthesis of both leading and lagging strands at the replication fork. The clamp-loading machinery must repeatedly load sliding-clamp factors onto primed sites at the replication fork. Recent structural and biochemical analyses provide unique insights into how these clamp-loading ATPase machines function to load clamps onto the DNA. Moreover, these studies highlight the evolutionary conservation of the clamp-loading process in the three domains of life.

Interaction between the T4 helicase-loading protein (gp59) and the DNA polymerase (gp43): a locking mechanism to delay replication during replisome assembly

The T4 helicase-loading protein (gp59) has been proposed to coordinate leading- and lagging-strand DNA synthesis by blocking leading-strand synthesis during the primosome assembly. In this work, we unambiguously demonstrate through a series of biochemical and biophysical experiments, including single-molecule fluorescence microscopy, that the inhibition of leading-strand holoenzyme progression by gp59 is the result of a complex formed between gp59 and leading-strand polymerase (gp43) on DNA that is instrumental in preventing premature replication during the assembly of the T4 replisome. We find that both the polymerization and 3' --> 5' exonuclease activities of gp43 are totally inhibited within this complex. Chemical cross-linking of the complex followed by tryptic digestion and peptide identification through matrix-assisted laser desorption/ionization-time-of-flight (MALDI-TOF) mass spectrometry identified Cys169 of gp43 and Cys215 of gp59 as residues in a region of a protein-protein contact. With the available crystal structures for both gp43 and gp59, a model of the complex was constructed based on shape complementarity, revealing that parts of the C-terminal domain from gp59 insert into the interface created by the thumb and exonuclease domains of gp43. This insertion effectively locks the polymerase into a conformation where switching between the pol and editing modes is prevented. Thus, continued assembly of the replisome through addition of the primosome components and elements of the lagging-strand holoenzyme can occur without leading-strand DNA replication.

Dissociative Properties of the Proteins within the Bacteriophage T4 Replisome

DNA replication is a highly processive and efficient process that involves the coordination of at least eight proteins to form the replisome in bacteriophage T4. Replication of DNA occurs in the 5' to 3' direction resulting in continuous replication on the leading strand and discontinuous replication on the lagging strand. A key question is how a continuous and discontinuous replication process is coordinated. One solution is to avoid having the completion of one Okazaki fragment to signal the start of the next but instead to have a key step such as priming proceed in parallel to lagging strand replication. Such a mechanism requires protein elements of the replisome to readily dissociate during the replication process. Protein trapping experiments were performed to test for dissociation of the clamp loader and primase from an active replisome in vitro whose template was both a small synthetic DNA minicircle and a larger DNA substrate. The primase, clamp, and clamp loader are found to dissociate from the replisome and are continuously recruited from solution. The effect of varying protein concentrations (dilution) on the size of Okazaki fragments supported the protein trapping results. These findings are in accord with previous results for the accessory proteins but, importantly now, identify the primase as dissociating from an active replisome. The recruitment of the primase from solution during DNA synthesis has also been found for Escherichia coli but not bacteriophage T7. The implications of these results for RNA priming and extension during the repetitive synthesis of Okazaki fragments are discussed.

The application of a minicircle substrate in the study of the coordinated T4 DNA replication

A reconstituted in vitro bacteriophage T4 DNA replication system was studied on a synthetic 70-mer minicircle substrate. This substrate was designed so that dGMP and dCMP were exclusively incorporated into the leading and the lagging strand, respectively. This design allows the simultaneous and independent measurement of the leading and lagging strand synthesis. In this paper, we report our results on the characterization of the 70-mer minicircle substrate. We show here that the minicircle substrate supports coordinated leading and lagging strand synthesis under the experimental conditions employed. The rate of the leading strand fork movement was at an average of approximately 150 nucleotides/s. This rate decreased to less than 30 nucleotides/s when the helicase was omitted from the reaction. These results suggest that both the holoenzyme and the primosome can be simultaneously assembled onto the minicircle substrate. The lagging strand synthesized on this substrate is of an average of 1.5 kb, and the length of the Okazaki fragments increased with decreasing [rNTPs]. The proper response of the Okazaki fragment size toward the change of the priming signal further indicates a functional replisome assembled on the minicircle template. The effects of various protein components on the leading and lagging strand synthesis were also studied. The collective results indicate that coordinated strand synthesis only takes place within certain protein concentration ranges. The optimal protein levels of the proteins that constitute the T4 replisome generally bracket the concentrations of the same proteins in vivo. Omission of the primase has little effect on the rate of dNMP incorporation or the rate of the fork movement on the leading strand within the first 30 s of the reaction. This inhibition only becomes significant at later times of the reaction and may be associated with the accumulation of single-stranded DNA leading to the collapse of active replisomes.

Examination of the role of the clamp-loader and ATP hydrolysis in the formation of the bacteriophage T4 polymerase holoenzyme

Transient kinetic analyses further support the role of the clamp-loader in bacteriophage T4 as a catalyst which loads the clamp onto DNA through the sequential hydrolysis of two molecules of ATP before and after addition of DNA. Additional rapid-quench and pulse-chase experiments have documented this stoichiometry. The events of ATP hydrolysis have been related to the opening/closing of the clamp protein through fluorescence resonance energy transfer (FRET). In the absence of a hydrolysable form of ATP, the distance across the subunit interface of the clamp does not increase as measured by intramolecular FRET, suggesting gp45 cannot be loaded onto DNA. Therefore, ATP hydrolysis by the clamp-loader appears to open the clamp wide enough to encircle DNA easily. Two additional molecules of ATP then are hydrolyzed to close the clamp onto DNA. The presence of an intermolecular FRET signal indicated that the dissociation of the clamp-loader from this complex occurred after guiding the polymerase onto the correct face of the clamp bound to DNA. The final holoenzyme complex consists of the clamp, DNA, and the polymerase. Although this sequential assembly mechanism can be generally applied to most other replication systems studied to date, the specifics of ATP utilization seem to vary across replication systems.

Motors and switches: AAA+ machines within the replisome

Clamp loaders are required to load the ring-shaped clamps that tether replicative DNA polymerases onto DNA. Recently solved crystal structures, along with a series of biochemical studies, have provided a detailed understanding of the clamp loading reaction. In particular, studies of the Escherichia coli clamp loader--an AAA+ machine--have provided insights into the architecture of clamp loaders from eukaryotes, bacteriophage T4 and archaea. Other AAA+ proteins are also involved in the initiation of DNA replication, and studies of the E. coli clamp loader indicate mechanisms by which these proteins might function.

Building a replisome solution structure by elucidation of protein-protein interactions in the bacteriophage T4 DNA polymerase holoenzyme

Assembly of DNA replication systems requires the coordinated actions of many proteins. The multiprotein complexes formed as intermediates on the pathway to the final DNA polymerase holoenzyme have been shown to have distinct structures relative to the ground-state structures of the individual proteins. By using a variety of solution-phase techniques, we have elucidated additional information about the solution structure of the bacteriophage T4 holoenzyme. Photocross-linking and mass spectrometry were used to demonstrate interactions between I107C of the sliding clamp and the DNA polymerase. Fluorescence resonance energy transfer, analytical ultracentrifugation, and isothermal titration calorimetry measurements were used to demonstrate that the C terminus of the DNA polymerase can interact at two distinct locations on the sliding clamp. Both of these binding modes may be used during holoenzyme assembly, but only one of these binding modes is found in the final holoenzyme. Present and previous solution interaction data were used to build a model of the holoenzyme that is consistent with these data.

Creating a dynamic picture of the sliding clamp during T4 DNA polymerase holoenzyme assembly by using fluorescence resonance energy transfer

The coordinated assembly of the DNA polymerase (gp43), the sliding clamp (gp45), and the clamp loader (gp44/62) to form the bacteriophage T4 DNA polymerase holoenzyme is a multistep process. A partially opened toroid-shaped gp45 is loaded around DNA by gp44/62 in an ATP-dependent manner. Gp43 binds to this complex to generate the holoenzyme in which gp45 acts to topologically link gp43 to DNA, effectively increasing the processivity of DNA replication. Stopped-flow fluorescence resonance energy transfer was used to investigate the opening and closing of the gp45 ring during holoenzyme assembly. By using two site-specific mutants of gp45 along with a previously characterized gp45 mutant, we tracked changes in distances across the gp45 subunit interface through seven conformational changes associated with holoenzyme assembly. Initially, gp45 is partially open within the plane of the ring at one of the three subunit interfaces. On addition of gp44/62 and ATP, this interface of gp45 opens further in-plane through the hydrolysis of ATP. Addition of DNA and hydrolysis of ATP close gp45 in an out-of-plane conformation. The final holoenzyme is formed by the addition of gp43, which causes gp45 to close further in plane, leaving the subunit interface open slightly. This open interface of gp45 in the final holoenzyme state is proposed to interact with the C-terminal tail of gp43, providing a point of contact between gp45 and gp43. This study further defines the dynamic process of bacteriophage T4 polymerase holoenzyme assembly.

Dissection of the ATP-driven reaction cycle of the bacteriophage T4 DNA replication processivity clamp loading system

Processive DNA replication requires the loading of a multisubunit ring-shaped protein complex, known as a sliding or processivity clamp, onto the primer-template (p/t) DNA. This clamp then binds to the replication polymerase to form a processive polymerase holoenzyme. The processivity of the holoenzyme derives from the topological properties of the clamp, which encircles the DNA without actually binding to it. Multisubunit complexes known as clamp-loaders utilize ATP to drive the placement of this ring around the DNA. To further understand the role of ATP binding and hydrolysis in driving clamp-loading in the DNA replication system of bacteriophage T4, we report the results of a series of presteady-state and steady-state kinetic ATPase experiments involving the various components of the reconstituted system. The results obtained are consistent with a mechanism in which a slow step, which involves the binary ATP-bound clamp-clamp loader complex, activates this complex and permits p/t DNA to bind and stimulate ATP hydrolysis. ATP hydrolysis itself, as well as the subsequent (after clamp-loading) dissociation of the clamp-loader and the slippage of the loaded clamp from the p/t DNA construct, are shown to be fast steps. A second slow step occurs after ATP hydrolysis. This step involves the dissociated clamp loader complex and may reflect ADP release. Only one molecule of ATP is hydrolyzed per clamp-loading event. Rate constants for each step, and an overall reaction mechanism for the T4 clamp-loading system, are derived from these data and from other results in the literature. The principles that emerge fit into a general framework that can apply to many biological processes involving ATP-driven reaction cycles.

The delta subunit of DNA polymerase III holoenzyme serves as a sliding clamp unloader in Escherichia coli

In Escherichia coli, the circular beta sliding clamp facilitates processive DNA replication by tethering the polymerase to primer-template DNA. When synthesis is complete, polymerase dissociates from beta and DNA and cycles to a new start site, a primed template loaded with beta. DNA polymerase cycles frequently during lagging strand replication while synthesizing 1-2-kilobase Okazaki fragments. The clamps left behind remain stable on DNA (t(12) approximately 115 min) and must be removed rapidly for reuse at numerous primed sites on the lagging strand. Here we show that delta, a single subunit of DNA polymerase III holoenzyme, opens beta and slips it off DNA (k(unloading) = 0.011 s(-)(1)) at a rate similar to that of the multisubunit gamma complex clamp loader by itself (0.015 s(-)(1)) or within polymerase (pol) III* (0.0065 s(-)(1)). Moreover, unlike gamma complex and pol III*, delta does not require ATP to catalyze clamp unloading. Quantitation of gamma complex subunits (gamma, delta, delta', chi, psi) in E. coli cells reveals an excess of delta, free from gamma complex and pol III*. Since pol III* and gamma complex occur in much lower quantities and perform several DNA metabolic functions in replication and repair, the delta subunit probably aids beta clamp recycling during DNA replication.

Biochemical characterization of a clamp-loader complex homologous to eukaryotic replication factor C from the hyperthermophilic archaeon Sulfolobus solfataricus

Here we report the isolation and characterization of a clamp-loader complex from the thermoacidophilic archaeon Sulfolobus solfataricus (SsoRFC). SsoRFC is a hetero-pentamer composed of polypeptides of 37 kDa (small subunit) and 46 kDa (large subunit), which possess primary structure similarity with human replication factor C p40 and p140 subunits, respectively. The two SsoRFC polypeptides were co-expressed in Escherichia coli and purified as a complex (SsoRFC-complex) that was demonstrated to possess a native M(r) of about 200 kDa and a 4:1 (small to large) subunit stoichiometric ratio. The small subunit was individually expressed in E. coli, purified, and found to form a homo-tetramer (SsoRFC-small; native M(r) 156 kDa), which was also characterized. The SsoRFC-complex, but not SsoRFC-small, highly stimulated the synthetic activity of S. solfataricus B1-type DNA polymerase in reactions containing primed M13mp18 DNA, ATP, and either of the two poliferating cell nuclear antigen-like processivity factors of S. solfataricus (039p and 048p). Both SsoRFC-small and -complex were able to hydrolyze ATP, but only the ATPase activity of the holo-enzymatic assembly was activated by primed DNA templates, such as poly(dA)-oligo(dT). As measured by nitrocellulose filter binding assays, SsoRFC-complex bound poly(dA)-oligo(dT), but not the unprimed homopolymer, whereas SsoRFC-small was devoid of any DNA-binding activity. The peculiar properties of this archaeal clamp-loader complex and their significance for the understanding of the DNA replication process in Archaea are discussed.

Tracking sliding clamp opening and closing during bacteriophage T4 DNA polymerase holoenzyme assembly

The bacteriophage T4 DNA polymerase holoenzyme, consisting of the DNA polymerase (gp43), the sliding clamp (gp45), and the clamp loader (gp44/62), is loaded onto DNA in an ATP-dependent, multistep reaction. The trimeric, ring-shaped gp45 is loaded onto DNA such that the DNA passes through the center of the ring. gp43 binds to this complex, thereby forming a topological link with the DNA and increasing its processivity. Using stopped-flow fluorescence-resonance energy transfer, we have investigated opening and closing of the gp45 ring during the holoenzyme assembly process. Two amino acids that lie on opposite sides of the gp45 subunit interface, W91 and V162C labeled with coumarin, were used as the fluorescence donor and acceptor, respectively. Free in solution, gp45 has two closed subunit interfaces with W91 to V162-coumarin distances of 19 A and one open subunit interface with a W91 to V162C-coumarin distance of 40 A. Making the assumption that the distance across the two closed subunit interfaces is unchanged during the holoenzyme assembly process, we have found that the distance across the open subunit interface is first increased to greater than 45 A and is then decreased to 30 A during a 10-step assembly mechanism. The gp45 ring is not completely closed in the holoenzyme complex, consistent with previous evidence suggesting that the C-terminus of gp43 is inserted into the gp45 subunit interface. Unexpectedly, ATP-hydrolysis events are coupled to only a fraction of the total distance change, with conformational changes linked to binding DNA and gp43 coupled to the majority of the total distance change. Using the nonhydrolyzable ATP analogue ATP-gamma-S results in formation of a nonproductive gp45 x gp44/62 complex; however, adding an excess of ATP to this nonproductive complex results in rapid ATP/ATP-gamma-S exchange to yield a productive gp45 x gp44/62 complex within seconds.

Crystal structure of the DNA polymerase processivity factor of T4 bacteriophage

The protein encoded by gene 45 of T4 bacteriophage (gene 45 protein or gp45), is responsible for tethering the catalytic subunit of T4 DNA Polymerase to DNA during high-speed replication. Also referred to as a sliding DNA clamp, gp45 is similar in its function to the processivity factors of bacterial and eukaryotic DNA polymerases, the beta-clamp and PCNA, respectively. Crystallographic analysis has shown that the beta-clamp and PCNA form highly symmetrical ring-shaped structures through which duplex DNA can be threaded. Gp45 shares no sequence similarity with beta-clamp or PCNA, and sequence comparisons have not been able to establish whether it adopts a similar structure. We have determined the crystal structure of gp45 from T4 bacteriophage at 2.4 A resolution, using multiple isomorphous replacement. The protein forms a trimeric ring-shaped assembly with overall dimensions that are similar to those of the bacterial and eukaryotic processivity factors. Each monomer of gp45 contains two domains that are very similar in chain fold to those of beta-clamp and PCNA. Despite an overall negative charge, the inner surface of the ring is in a region of positive electrostatic potential, consistent with a mechanism in which DNA is threaded through the ring.

In vitro reconstitution of the bacteriophage T4 clamp loader complex (gp44/62)

The clamp loader complex (CLC) of bacteriophage T4 is essential for viability and has analogs in both prokaryotes and eukaryotes. The gp44 and gp62 subunits of the T4 CLC, in a 4:1 ratio, tightly associate such that the two proteins co-purify. Using transformed Escherichia coli, we were able to demonstrate for the first time purification of the unique protein gp62 in the absence of gp44. We experimentally determined the isoelectric point for the individual subunits. An in vitro physical interaction could be observed between the native subunits, which resulted in a reconstituted CLC that displayed the signature pattern of the ATPase functions of native CLC. Thus we demonstrate that the CLC forms via a self-assembly pathway rather than through a translational capture mechanism.

Comparison of the assembly of the bacteriophage T4 clamp loader complex (gp44/62) expressed in a cis versus trans genomic configuration

Proper formation of the bacteriophage T4 DNA polymerase holoenzyme requires a wide spectrum of protein-protein and protein-DNA interactions among the DNA polymerase gp43, the sliding clamp gp45, and gp44/62, the clamp loader complex (CLC). The 44 and 62 proteins associate to form a tight complex maintained in a 4:1 ratio. The 44 and 62 genes are adjacent to each other on the T4 genome, are cotranscribed, and are translationally coupled. It has been suggested that translational coupling may play a role in the formation of the clamp loader complex and may control its stoichiometry. To examine the effect of coupling on the assembly of the complex, expression in trans of genes 44 and 62 was accomplished by cotransforming Escherichia coli with compatible, inducible plasmid vectors. A gp44/62 complex could be purified from such cells. The complex assembled in trans exhibited stoichiometry and ATPase activity identical to native complex. Burst sizes were determined to gauge the efficiency of clamp loader complex formation. When gp44 was supplied by a plasmid and gp62 was supplied by the T4 genome, complex formation was as efficient as in wild-type virus. However, when gp62 was supplied by plasmid and gp44 was supplied by the T4 genome, efficiency of complex formation was decreased. This decrease in the efficiency of complex formation was temperature dependent, being more pronounced at higher temperatures. At higher temperatures, a larger proportion of gp62 expressed from the plasmid was found to be present in an insoluble form. The decrease in efficiency of complex formation correlated to a decrease in solubility of the gene 62 protein.

Sliding clamp of the bacteriophage T4 polymerase has open and closed subunit interfaces in solution

The sliding clamps of bacteriophage T4 (gp45), Escherichia coli (beta clamp), and yeast (PCNA) are required for processive DNA synthesis by their cognate DNA polymerases. The X-ray crystal structures of all three of these clamps have been shown to be closed, circular complexes. This paper reports investigations of the solution structure of bacteriophage T4 gp45 by analytical ultracentrifugation, fluorescence, and hydrodynamic modeling. Mutants of gp45 with inter- and intrasubunit disulfide bonds were created to alter the solution structure of gp45, with additional mutagenesis used to investigate the importance of the proline-rich loop region found between the two domains of each gp45 monomer. The wild-type gp45 trimer assembles from monomers cooperatively with a dissociation constant of 0.21 microM2 and values between 0.088 and 0. 32 microM2 for the mutants. Velocity ultracentrifugation experiments showed that wild-type gp45 possesses a sedimentation coefficient strongly dependent on concentration, typical of asymmetric or elongated molecules, that when extrapolated to zero concentration yields a sedimentation coefficient of 4.0 S. The loop and the disulfide mutants exhibited sedimentation coefficients with little concentration dependence, typical of symmetric or spherical molecules, that when extrapolated to zero concentration yielded sedimentation coefficients of 4.4-4.8 S. The lower sedimentation coefficient in the former case is consistent with wild-type gp45 being more asymmetric or elongated than the mutant forms. Fluorescence-resonance energy-transfer experiments were used to measure the distance between two amino acids (W91 and V162C-coumarin) on opposite sides of the gp45 subunit interface. For an intrasubunit disulfide mutant, the distance between these two amino acids was determined to be 19 A (14 A in the X-ray crystal structure), consistent with a closed complex. For the mutants without intrasubunit disulfides, the efficiency of fluorescence-resonance energy transfer was in accord with a model of gp45 being an open complex composed of two closed subunit interfaces and a third open interface separated by a distance of 35-38 A. The collective data supplemented with hydrodynamic modeling were consistent with gp45 subunit separation achieved within the plane of the gp45 ring.

ATP hydrolysis catalyzed by human replication factor C requires participation of multiple subunits

Human replication factor C (hRFC) is a five-subunit protein complex (p140, p40, p38, p37, and p36) that acts to catalytically load proliferating cell nuclear antigen onto DNA, where it recruits DNA polymerase delta or epsilon to the primer terminus at the expense of ATP, leading to processive DNA synthesis. We have previously shown that a subcomplex of hRFC consisting of three subunits (p40, p37, and p36) contained DNA-dependent ATPase activity. However, it is not clear which subunit(s) hydrolyzes ATP, as all five subunits include potential ATP binding sites. In this report, we introduced point mutations in the putative ATP-binding sequences of each hRFC subunit and examined the properties of the resulting mutant hRFC complex and the ATPase activity of the hRFC or the p40.p37.p36 complex. A mutation in any one of the ATP binding sites of the p36, p37, p40, or p140 subunits markedly reduced replication activity of the hRFC complex and the ATPase activity of the hRFC or the p40.p37.p36 complex. A mutation in the ATP binding site of the p38 subunit did not alter the replication activity of hRFC. These findings indicate that the replication activity of hRFC is dependent on efficient ATP hydrolysis contributed to by the action of four hRFC subunits.

Efficiency and frequency of translational coupling between the bacteriophage T4 clamp loader genes

The bacteriophage T4 DNA polymerase holoenzyme is composed of the core polymerase, gene product 43 (gp43), in association with the "sliding clamp" of the T4 system, gp45. Sliding clamps are the processivity factors of DNA replication systems. The T4 sliding clamp comes to encircle DNA via the "clamp loader" activity inherent in two other T4 proteins: 44 and 62. These proteins assemble into a pentameric complex with a precise 4:1 stoichiometry of proteins 44 and 62. Previous work established that T4 genes 44 and 62, which are directly adjacent on polycistronic mRNA molecules, are-to some degree-translationally coupled. In the present study, measurement of the levels (monomers/cell) of the clamp loader subunits during the course of various T4 infections in different host cell backgrounds was accomplished by quantitative immunoblotting. The efficiency of translational coupling was obtained by determining the in vivo levels of gp62 that were synthesized when its translation was either coupled to or uncoupled from the upstream translation of gene 44. Levels of gp44 were also measured to determine the relative stoichiometry of synthesis and the percentage of gp44 translation that was transmitted across the intercistronic junction (coupling frequency). The results indicated a coupling efficiency of approximately 85% and a coupling frequency of approximately 25% between the 44-62 gene pair during the course of infection. Thus, translational coupling is the major factor in maintaining the 4:1 stoichiometry of synthesis of the clamp loader subunits. However, coupling does not appear to be an absolute requirement for the synthesis of gp62.

Dissecting the order of bacteriophage T4 DNA polymerase holoenzyme assembly

Most biological organisms rely upon a DNA polymerase holoenzyme for processive DNA replication. The bacteriophage T4 DNA polymerase holoenzyme is composed of the polymerase enzyme and a clamp protein (the 45 protein), which functions as a processivity factor by strengthening the interaction between DNA and the holoenzyme. The 45 protein must be loaded onto DNA by a clamp loader ATPase complex (the 44/62 complex). In this paper, the order of events leading to holoenzyme formation is investigated using a combination of rapid-quench and stopped-flow fluorescence spectroscopy kinetic methods. A rapid-quench strand displacement assay in which the order of holoenzyme component addition is varied provided data indicating that the rate-limiting step in holoenzyme assembly is associated with the clamp loading process. Pre-steady-state analysis of the clamp loader ATPase activity demonstrated that the four bound ATP molecules are hydrolyzed stepwise during the clamp loading process in groups of two. Clamp loading was examined with stopped-flow fluorescence spectroscopy from the perspective of the clamp itself, using a site-specific, fluorescently labeled 45 protein. A mechanism for T4 DNA polymerase holoenzyme assembly is proposed in which the 45 protein interacts with the 44/62 complex leading to the hydrolysis of 2 equiv of ATP, and upon contacting DNA, the remaining two ATP molecules bound to the 44/62 complex are hydrolyzed. Once all four ATP molecules are hydrolyzed, the 45 protein is poised on DNA for association with the polymerase to form the holoenzyme.

Divergence of a DNA replication gene cluster in the T4-related bacteriophage RB69

The genomes of bacteriophages T4 and RB69 are phylogenetically related but diverge in nucleotide sequence at many loci and are incompatible with each other in vivo. We describe here the biological implications of divergence in a genomic segment that encodes four essential DNA replication proteins: gp45 (sliding clamp), gp44/62 complex (clamp loader), and gp46 (a recombination protein). We have cloned, sequenced, and expressed several overlapping segments of the RB69 gene 46-45.2-(rpbA)-45-44-62 cluster and compared its features to those of the homologous gene cluster from T4. The deduced primary structures of all four RB69 replication proteins and gp45.2 from this cluster are very similar (80 to 95% similarity) to those of their respective T4 homologs. In contrast, the rpbA region (which encodes a nonessential protein in T4) is highly diverged (approximately 49% similarity) between the two phage genomes and does not encode protein in RB69. Expression studies and patterns of high divergence of intercistronic nucleotide sequences of this cluster suggest that T4 and RB69 evolved similar transcriptional and translational control strategies for the cistrons contained therein, but with different specificities. In plasmid-phage complementation assays, we show that posttranslationally, RB69 and T4 homologs of gp45 and the gp44/62 complex can be effectively exchanged between the two phage replicase assemblies; however, we also show results which suggest that mixed clamp loader complexes consisting of T4 gp62 and RB69 gp44 subunits are not active for phage DNA replication. Thus, specificity of the gp44-gp62 interaction in the clamp loader marks a point of departure between the T4 and RB69 replication systems.

Structural analyses of gp45 sliding clamp interactions during assembly of the bacteriophage T4 DNA polymerase holoenzyme. I. Conformational changes within the gp44/62-gp45-ATP complex during clamp loading

A multisubunit ring-shaped protein complex is used to tether the polymerase to the DNA at the primer-template junction in most DNA replication systems. This "sliding clamp" interacts with the polymerase, completely encircles the DNA duplex, and is assembled onto the DNA by a specific clamp loading complex in an ATP-driven process. Site-specific mutagenesis has been used to introduce single cysteine residues as reactive sites for adduct formation within each of the three subunits of the bacteriophage T4-coded sliding clamp complex (gp45). Two such mutants, gp45S19C and gp45K81C, are reacted with the cysteine-specific photoactivable cross-linker TFPAM-3 and used to track the changes in the relative positioning of the gp45 subunits with one another and with the other components of the clamp loading complex (gp44/62) in the various stages of the loading process. Cross-linking interactions performed in the presence of nucleotide cofactors show that ATP binding and hydrolysis, interaction with primer-template DNA, and release of ADP all result in significant conformational changes within the clamp loading cycle. A structural model is presented to account for the observed rearrangements of intersubunit contacts within the complex during the loading process.

Structural analyses of gp45 sliding clamp interactions during assembly of the bacteriophage T4 DNA polymerase holoenzyme. II. The Gp44/62 clamp loader interacts with a single defined face of the sliding clamp ring

The phage T4 gp45 sliding clamp is a ring-shaped replication accessory protein that is mounted onto DNA in an ATP-dependent manner by the gp44/62 clamp loader. In the preceding paper (Pietroni, P., Young, M. C., Latham, G. J., and von Hippel, P. H. (1997) J. Biol. Chem. 272, 31666-31676), two gp45 mutants were exploited to probe interactions of the sliding clamp ring with the gp44/62 loading machinery at various steps during the clamp loading process. In this report, these studies are extended to examine the polarity of the binding interaction between gp45 and gp44/62. Three different gp45 mutants containing a single cysteine in three topographically distinct positions were used. Several different reporter groups, including extrinsic fluorophores, a photo-cross-linker, and a biotin linker for use in a novel "streptavidin interference assay," were covalently attached to these cysteine residues. Since gp45 is a trimeric protein, these three different mutations allowed us to probe up to nine distinct local environments along the surface of the sliding clamp in the presence and absence of other replication proteins. The results show that the gp44/62-ATP clamp loader complex binds exclusively to the C-terminal (S19C) face of the gp45 ring.

Assembly and disassembly of DNA polymerase holoenzyme

The complex task of genomic replication requires a large collection of proteins properly assembled within the close confines of the replication fork. The mechanism and dynamics of holoenzyme assembly and disassembly have been investigated using steady state and pre-steady state methods as opposed to structural studies, primarily due to the intrinsic transient nature of these protein complexes during DNA replication. The key step in bacteriophage T4 holoenzyme assembly involves ATP hydrolysis, whereas disassembly is mediated by subunit dissociation of the clamp protein in an ATP-independent manner.

Mechanism of bacteriophage T4 DNA holoenzyme assembly: the 44/62 protein acts as a molecular motor

The role of ATP hydrolysis by the 44/62 protein in formation of the stable holoenzyme DNA replication complex has been further elucidated by specifically examining the role that the 44/62 protein plays in loading the 45 protein onto the DNA substrate. A stable phospho-45 protein or phosphorylated holoenzyme complex was not detected or isolated, suggesting that the 44/62 protein may not act as a protein kinase. Product and dead-end inhibition data are consistent with an ordered kinetic mechanism with respect to product release in which phosphate is released from the 44/62 protein prior to ADP. Positional isotope effect studies support this mechanism and failed to demonstrate that ATP hydrolysis by the 44/62 protein is reversible. Steady-state ATPase assays using aluminum tetrafluoride as an inhibitor are also consistent with release of ADP being partially rate-limiting. Aluminum tetrafluoride acts to trap ADP on the enzyme after turnover, forming a stable transition state analog that dissociates slowly from the enzyme. Processive DNA synthesis does not occur using the accessory proteins in the presence of pre- or post-hydrolysis analogs of ATP nor in the presence of ADP-AlF4, indicating that turnover of the 44/62 protein is absolutely required for formation of the holoenzyme complex. Collectively, data obtained regarding ATP hydrolysis by the 44/62 protein are described in terms of the clamp loading protein functioning as a molecular motor, similar to other systems including myosin and kinesin.

Protein-protein and protein-DNA interactions at the bacteriophage T4 DNA replication fork. Characterization of a fluorescently labeled DNA polymerase sliding clamp

The T4 DNA polymerase holoenzyme is composed of the polymerase enzyme complexed to the sliding clamp (the 45 protein), which is loaded onto DNA by an ATP-dependent clamp loader (the 44/62 complex). This paper describes a new method to directly investigate the mechanism of holoenzyme assembly using a fluorescently labeled cysteine mutant of the 45 protein. This protein possessed unaltered function yet produced substantial changes in probe fluorescence intensity upon interacting with other components of the holoenzyme. These fluorescence changes provide insight into the role of ATP hydrolysis in holoenzyme assembly. Using either ATP or the non-hydrolyzable ATP analog, adenosine 5'-O-(3-thiophosphate), events in holoenzyme assembly were assigned as either dependent or independent of ATP hydrolysis. A holoenzyme assembly mechanism is proposed in which the 44/62 complex mediates the association of the 45 protein with DNA in an ATP-dependent manner not requiring ATP hydrolysis. Upon ATP hydrolysis, the 44/62 complex triggers a conformational change in the 45 protein that may be attributed to the clamp loading onto DNA.

Role of adenosine 5'-triphosphate hydrolysis in the assembly of the bacteriophage T4 DNA replication holoenzyme complex

Steady-state and pre-steady-state rates of ATP hydrolysis by the 44/62 accessory protein were determined to elucidate the role of ATP hydrolysis in bacteriophage T4 holoenzyme complex formation. Steady-state ATPase measurements of the 44/62 protein under various combinations of 45 protein, DNA substrate, and T4 exo- polymerase indicate that although the 44/62 protein synergistically hydrolyzes ATP in the presence of 45 protein and DNA substrate, the ATPase activity of 44/62 is diminished substantially upon the formation of the holoenzyme complex. The decrease in activity is primarily in kcat while the K(m) for ATP is changed unsubstantially by the various combinations. Data suggest that the decrease in the rate of ATP hydrolysis upon the addition of T4 exo- polymerase in the presence of 45 protein and DNA substrate is due to formation of a stable holoenzyme complex consisting of only the 45 protein and T4 exo- polymerase in a 1:1 ratio. The 44/62 protein acts catalytically to load 45 protein onto the DNA substrate and does not remain a component of the holoenzyme complex. Pre-steady-state kinetic analysis of the ATP hydrolysis reaction catalyzed by the 44/62 protein loading the 45 protein onto the DNA substrate in the absence or presence of polymerase is biphasic, in which a burst in ATP hydrolysis precedes the steady-state rate of ATP hydrolysis. An identical burst in ATP consumption is obtained under either condition, indicating that ATP hydrolysis is not required to load polymerase into the holoenzyme complex. The data suggest one turnover of ATP at each of the four ATPase active sites of the 44/62 protein per 45 protein loaded. ATP hydrolysis by the 44/62 protein under conditions of holoenzyme complex formation is the rate-limiting step in holoenzyme complex formation. The process of holoenzyme formation appears to be identical for leading and lagging strand synthesis.

DNA replication: enzymology and mechanisms

Research into the enzymology of DNA replication has seen a multitude of highly significant advances during the past year, in both prokaryotic and eukaryotic systems. The scope of this article is limited to chromosomal replicases and origins of initiation. The multiprotein chromosomal replicases of prokaryotes and eukaryotes appear to be strikingly similar in structure and function, although future work may reveal their differences. Recent developments, elaborating the activation of origins in several systems, have begun to uncover mechanisms of regulation. The enzymology of eukaryotic origins has, until now, been limited to viral systems, but over the past few years, enzymology has caught a grip on the cellular origins of yeast.

Energetics of arginine-4 substitution mutants in the N-terminal cooperativity domain of T4 gene 32 protein

Gene 32 protein (gp32) from bacteriophage T4 is a sequence-nonspecific single-strand (ss) nucleic acid binding protein which binds highly cooperatively to ss nucleic acids. The N-terminal "B" or basic domain (residues 1-21) is known to be required for highly cooperative binding by gp32 (where K(app) = K(int) omega, omega > or = 500), since its removal results in a protein which binds ss nucleic acids noncooperatively (omega = 1). In this paper, we probe the molecular details of cooperative binding by gp32 by physicochemical characterization of a set of four single amino acid substitution mutants of Arg4: Lys4 (R4K gp32), Gln4 (R4Q gp32), Thr4 (R4T gp32), and Gly4 (R4G gp32). The qualitative ranking of binding affinities to poly(A) is wild-type > or = R4K > R4Q > R4T > R4G > gp32-B (gp32 lacking the first 21 amino acids). The occluded site size is n(app) = 7.5 +/- 0.5 for all gp32s. Resolution of K(int) and omega for wild-type, R4K, R4Q, and R4T gp32s was estimated under conditions of low lattice saturation (v < or = 0.011) using multiple reverse fluorescence titrations collected at 10 mM Tris-HCl, pH 8.1, 20 degrees C, and a NaCl concentration where K(app) was (2-4) x 10(6) M-1 for each gp32 on the ribohomopolymer poly(A). Binding parameters for all gp32s were obtained directly or compared by conservative extrapolation of the [NaCl] dependence of K(app) to 0.20 M NaCl, 20 degrees C, pH 8.1. The magnitude of omega was then assumed not to vary with [NaCl] (shown for R4T gp32), allowing estimation of K(int) at 0.20 M NaCl. We find that R4K gp32 binds to poly(A) with an overall affinity (K(app)) which is 2-3-fold lower than wild-type gp32, while omega for each molecule seems indistinguishable (wild-type gp32, omega approximately 800-1300; R4K gp32, omega approximately 600-1200). Surprisingly, R4Q gp32 is characterized by an omega also not readily distinguishable from the wild-type and R4K proteins (omega approximately 800-4400), while K(app) is reduced about 10-fold. This mutant also shows a significantly reduced [NaCl] dependence of the binding to poly(A). R4T gp32 binds about 10-fold weaker than the Q mutant. It exhibits an omega ranging from 300 to 700 and a substantially reduced [NaCl] dependence (delta log K(int)/delta log [NaCl] = -1.4 from 0.10 to 0.20 M NaCl), indicative of significant perturbations in both K(int) and omega terms.(ABSTRACT TRUNCATED AT 400 WORDS)

Identification, isolation, and characterization of the structural gene encoding the delta' subunit of Escherichia coli DNA polymerase III holoenzyme

The gene encoding the delta' subunit of DNA polymerase III holoenzyme, designated holB, was cloned by a strategy in which peptide sequence was used to derive a DNA hybridization probe. The gene maps to 24.95 centisomes of the chromosome. Sequencing of holB revealed a 1,002-bp open reading frame predicted to produce a 36,936-Da protein. The gene has a ribosome-binding site and promoter that are highly similar to the consensus sequences and is flanked by two potential open reading frames. Protein sequence analysis of delta' revealed a high degree of similarity to the dnaX gene products of Escherichia coli and Bacillus subtilis, including one stretch of 10 identical amino acid residues. A lesser degree of similarity to the gene 44 protein of bacteriophage T4 and the 40-kDa protein of the A1 complex (replication factor C) of HeLa cells was seen. The gene, when placed into a tac promoter-based expression plasmid, directed expression of two proteins of similar size. By immunodetection with anti-holoenzyme immunoglobulin G, both proteins are judged to be products of holB.

Cryoelectron microscopic visualization of functional subassemblies of the bacteriophage T4 DNA replication complex

A specific complex of proteins involved in bacteriophage T4 replication has been visualized by cryoelectron microscopy as distinctive structures in association with DNA. Formation of these structures, which we term "hash-marks" for their characteristic appearance in association with DNA, requires the presence of the T4 polymerase accessory proteins (the products of T4 genes 44, 45 and 62), ATP and appropriate DNA cofactors. ATP hydrolysis by the DNA-stimulated ATPase activity of the accessory proteins is required for visualization of the hash-mark structures. If ATP hydrolysis is stopped by chelation of Mg2+, by dilution with a non-hydrolyzable ATP analogue, or by exhaustion of the ATP supply, the DNA-associated structures disappear within seconds to minutes, indicating that they have a finite and relatively short lifetime. The labile nature of the structures makes their study by more conventional methods of electron microscopy, as well as by most other structural approaches, difficult if not impossible. Addition of T4 gene 32 protein increases the number of hash-mark structures, as well as increasing the rate of ATP hydrolysis. Using plasmid DNA in either a native (supercoiled) or enzymatically modified state, we have shown that nicked or gapped DNA is required as a cofactor for hash-mark formation. Stimulation of the ATPase activity of the accessory proteins has a similar cofactor requirement. These conditions for the formation and visualization of the structures parallel those required for the action of these complexes in promoting the enzymatic activity of the T4 DNA polymerase, as well as the transcription of late T4 genes. Substructure in the hash-marks has been examined by image analysis, which reveals a variation in the projected density of the subunits comprising the structures. The three-dimensional size of the hash-marks, modeled as a solid ellipsoid, is consistent with that of the gene 44/62 protein subcomplex. Density variations suggest an arrangement of subunits, either tetragonal or trigonal, viewed from a variety of angles about the DNA axis. The hash-mark structures often appear in clusters, even in DNA that has a single nick. We interpret this distribution as the result of one-dimensional translocation of the hash-marks along the DNA after their ATP-dependent initial association with, and injection into, the DNA at nicks or gaps.

Protein-DNA cross-linking demonstrates stepwise ATP-dependent assembly of T4 DNA polymerase and its accessory proteins on the primer-template

T4 DNA polymerase, the 44/62 and 45 polymerase accessory proteins, and 32 single-stranded DNA-binding protein catalyze ATP-dependent DNA synthesis. Using DNA primers with cross-linkable residues at specific positions, we obtained structural data that reveal how these proteins assemble on the primer-template. With the nonhydrolyzable ATP analog ATP gamma S, assembly of the 44/62 and 45 proteins on the primer requires 32 protein but not polymerase. ATP hydrolysis changes the position and intensity of cross-linking to each of the accessory proteins and allows cross-linking of polymerase. Our data indicate that the initial binding of the three accessory proteins and ATP to a 32 protein-covered primer-template is followed by ATP hydrolysis, binding of polymerase, and movement of the accessory proteins to yield a complex capable of processive DNA synthesis.

Homologous pairing in vitro initiated by DNA synthesis

A number of models have been proposed for the initiation of general genetic recombination. One of these, originally proposed by Meselson and Radding, imagines that the single-stranded 5' tail that results from strand displacement DNA repair synthesis can initiate homologous recombination by invading a homologous duplex. The resultant D-loop intermediate is then processed into mature products. We demonstrate here that an in vitro system composed of the bacteriophage T4 uvsX protein (a RecA-like "strand transferase") and part of the T4 DNA polymerase holoenzyme efficiently mediates pairing between nicked double-stranded circular and linear duplex DNAs, thereby demonstrating the feasibility of a key step in the Meselson-Radding model.