Single crystals of hydrogenase from Desulfovibrio vulgaris Miyazaki F

Mechanistic Principles of Hydrogen Evolution in the Membrane-Bound Hydrogenase

The membrane-bound hydrogenase (Mbh) from Pyrococcus furiosus is an archaeal member of the Complex I superfamily. It catalyzes the reduction of protons to H2 gas powered by a [NiFe] active site and transduces the free energy into proton pumping and Na+/H+ exchange across the membrane. Despite recent structural advances, the mechanistic principles of H2 catalysis and ion transport in Mbh remain elusive. Here, we probe how the redox chemistry drives the reduction of the proton to H2 and how the catalysis couples to conformational dynamics in the membrane domain of Mbh. By combining large-scale quantum chemical density functional theory (DFT) and correlated ab initio wave function methods with atomistic molecular dynamics simulations, we show that the proton transfer reactions required for the catalysis are gated by electric field effects that direct the protons by water-mediated reactions from Glu21L toward the [NiFe] site, or alternatively along the nearby His75L pathway that also becomes energetically feasible in certain reaction steps. These local proton-coupled electron transfer (PCET) reactions induce conformational changes around the active site that provide a key coupling element via conserved loop structures to the ion transport activity. We find that H2 forms in a heterolytic proton reduction step, with spin crossovers tuning the energetics along key reaction steps. On a general level, our work showcases the role of electric fields in enzyme catalysis and how these effects are employed by the [NiFe] active site of Mbh to drive PCET reactions and ion transport.

New insights into the oxidation process from neutron and X-ray crystal structures of an O2-sensitive [NiFe]-hydrogenase

[NiFe]-hydrogenase from Desulfovibrio vulgaris Miyazaki F is an O2-sensitive enzyme that is inactivated in the presence of O2 but the oxidized enzyme can recover its catalytic activity by reacting with H2 under anaerobic conditions. Here, we report the first neutron structure of [NiFe]-hydrogenase in its oxidized state, determined at a resolution of 2.20 Å. This resolution allowed us to reinvestigate the structure of the oxidized active site and to observe the positions of protons in several short hydrogen bonds. X-ray anomalous scattering data revealed that a part of the Ni ion is dissociated from the active site Ni-Fe complex and forms a new square-planar Ni complex, accompanied by rearrangement of the coordinated thiolate ligands. One of the thiolate Sγ atoms is oxidized to a sulfenate anion but remains attached to the Ni ion, which was evaluated by quantum chemical calculations. These results suggest that the square-planar complex can be generated by the attack of reactive oxygen species derived from O2, as distinct from one-electron oxidation leading to a conventional oxidized form of the Ni-Fe complex. Another major finding of this neutron structure analysis is that the Cys17S thiolate Sγ atom coordinating to the proximal Fe-S cluster forms an unusual hydrogen bond with the main-chain amide N atom of Gly19S with a distance of 3.25 Å, where the amide proton appears to be delocalized between the donor and acceptor atoms. This observation provides insight into the contribution of the coordinated thiolate ligands to the redox reaction of the Fe-S cluster.

Towards cryogenic neutron crystallography on the reduced form of [NiFe]-hydrogenase

A membrane-bound hydrogenase from Desulfovibrio vulgaris Miyazaki F is a metalloenzyme that contains a binuclear Ni-Fe complex in its active site and mainly catalyzes the oxidation of molecular hydrogen to generate a proton gradient in the bacterium. The active-site Ni-Fe complex of the aerobically purified enzyme shows its inactive oxidized form, which can be reactivated through reduction by hydrogen. Here, in order to understand how the oxidized form is reactivated by hydrogen and further to directly evaluate the bridging of a hydride ligand in the reduced form of the Ni-Fe complex, a neutron structure determination was undertaken on single crystals grown in a hydrogen atmosphere. Cryogenic crystallography is being introduced into the neutron diffraction research field as it enables the trapping of short-lived intermediates and the collection of diffraction data to higher resolution. To optimize the cooling of large crystals under anaerobic conditions, the effects on crystal quality were evaluated by X-rays using two typical methods, the use of a cold nitrogen-gas stream and plunge-cooling into liquid nitrogen, and the former was found to be more effective in cooling the crystals uniformly than the latter. Neutron diffraction data for the reactivated enzyme were collected at the Japan Photon Accelerator Research Complex under cryogenic conditions, where the crystal diffracted to a resolution of 2.0 Å. A neutron diffraction experiment on the reduced form was carried out at Oak Ridge National Laboratory under cryogenic conditions and showed diffraction peaks to a resolution of 2.4 Å.

Structural Characterization of Poised States in the Oxygen Sensitive Hydrogenases and Nitrogenases

The crystallization of FeS cluster-containing proteins has been challenging due to their oxygen sensitivity, and yet these enzymes are involved in many critical catalytic reactions. The last few years have seen a wealth of innovative experiments designed to elucidate not just structural but mechanistic insights into FeS cluster enzymes. Here, we focus on the crystallization of hydrogenases, which catalyze the reversible reduction of protons to hydrogen, and nitrogenases, which reduce dinitrogen to ammonia. A specific focus is given to the different experimental parameters and strategies that are used to trap distinct enzyme states, specifically, oxidants, reductants, and gas treatments. Other themes presented here include the recent use of Cryo-EM, and how coupling various spectroscopies to crystallization is opening up new approaches for structural and mechanistic analysis.

Improved purification, crystallization and crystallographic study of Hyd-2-type [NiFe]-hydrogenase from Citrobacter sp. S-77

The purification procedure of Hyd-2-type [NiFe]-hydrogenase from Citrobacter sp. S-77 was improved by applying treatment with trypsin before chromatography. Purified protein samples both with and without trypsin treatment were successfully crystallized using the sitting-drop vapour-diffusion method with polyethylene glycol as a precipitant. Both crystals belonged to space group P21, with unit-cell parameters a = 63.90, b = 118.89, c = 96.70 Å, β = 100.61° for the protein subjected to trypsin treatment and a = 65.38, b = 121.45, c = 98.63 Å, β = 102.29° for the sample not treated with trypsin. The crystal obtained from the trypsin-treated protein diffracted to 1.60 Å resolution, which is considerably better than the 2.00 Å resolution obtained without trypsin treatment. The [NiFe]-hydrogenase from Citrobacter sp. S-77 retained catalytic activity with some amount of O2, indicating that it has clear O2 tolerance.

Light-Driven Hydrogen Production by Hydrogenases and a Ru-Complex inside a Nanoporous Glass Plate under Aerobic External Conditions

Hydrogenases are powerful catalysts for light-driven H2 production using a combination of photosensitizers. However, except oxygen-tolerant hydrogenases, they are immediately deactivated under aerobic conditions. We report a light-driven H2 evolution system that works stably even under aerobic conditions. A [NiFe]-hydrogenase from Desulfovibrio vulgaris Miyazaki F was immobilized inside nanoporous glass plates (PGPs) with a pore diameter of 50 nm together with a ruthenium complex and methyl viologen as a photosensitizer and an electron mediator, respectively. After immersion of PGP into the medium containing the catalytic components, an anaerobic environment automatically established inside the nanopores even under aerobic external conditions upon irradiation with solar-simulated light; this system constantly evolved H2 with an efficiency of 3.7 μmol H2 m(-2) s(-1). The PGP system proposed in this work represents a promising first step toward the development of an O2-tolerant solar energy conversion system.

Force-Field Development and Molecular Dynamics of [NiFe] Hydrogenase

Classical molecular force-field parameters describing the structure and motion of metal clusters in [NiFe] hydrogenase enzymes can be used to compare the dynamics and thermodynamics of [NiFe] under different oxidation, protonation, and ligation circumstances. Using density functional theory (DFT) calculations of small model clusters representative of the active site and the proximal, medial, and distal Fe/S metal centers and their attached protein side chains, we have calculated classical force-field parameters for [NiFe] in reduced and oxidized states, including internal coordinates, force constants, and atom-centered charges. Derived force constants revealed that cysteinate ligands bound to the metal ions are more flexible in the Ni-B active site, which has a bridging hydroxide ligand, than in the Ni-C active site, which has a bridging hydride. Ten nanosecond all-atom, explicit-solvent MD simulations of [NiFe] hydrogenase in oxidized and reduced catalytic states established the stability of the derived force-field parameters in terms of Cα and metal cluster fluctuations. Average active site structures from the protein MD simulations are consistent with [NiFe] structures from the Protein Data Bank, suggesting that the derived force-field parameters are transferrable to other hydrogenases beyond the structure used for testing. A comparison of experimental H2-production rates demonstrated a relationship between cysteinate side chain rotation and activity, justifying the use of a fully dynamic model of [NiFe] metal cluster motion.

Photoinduced hydrogen production by direct electron transfer from photosystem I cross-linked with cytochrome c3 to [NiFe]-hydrogenase

The photosynthetic reaction center is an efficient molecular device for the conversion of light energy to chemical energy. In a previous study, we synthesized the hydrogenase/photosystem I (PSI) complex, in which Ralstonia hydrogenase was linked to the cytoplasmic side of Synechocystis PSI, to modify PSI so that it photoproduced molecular hydrogen (H2). In that study, hydrogenase was fused with a PSI subunit, PsaE, and the resulting hydrogenase-PsaE fusion protein was self-assembled with PsaE-free PSI to give the hydrogenase/PSI complex. Although the hydrogenase/PSI complex served as a direct light-to-H2 conversion system in vitro, the activity was totally suppressed by adding physiological PSI partners, ferredoxin (Fd) and ferredoxin-NADP+-reductase (FNR). In the present study, to establish an H2 photoproduction system in which the activity is not interrupted by Fd and FNR, position 40 of PsaE from Synechocystis sp. PCC6803, corresponding to the Fd-binding site on PSI, was selected and targeted for the cross-linking with cytochrome c3 (cytc3) from Desulfovibrio vulgaris. The covalent adduct of cytc3 and PsaE was stoichiometrically assembled with PsaE-free PSI to form the cytc3/PSI complex. The NADPH production by the cytc3/PSI complex coupled with Fd and FNR decreased to approximately 20% of the original activity, whereas the H2 production by the cytc3/PSI complex coupled with hydrogenase from Desulfovibrio vulgaris was enhanced 7-fold. Consequently, in the simultaneous presence of hydrogenase, Fd, and FNR, the light-driven H2 production by the hydrogenase/cytc3/PSI complex was observed (0.30 pmol Hz/mg chlorophyll/h). These results suggest that the cytc3/PSI complex may produce H2 in vivo.

A single-crystal ENDOR and density functional theory study of the oxidized states of the [NiFe] hydrogenase from Desulfovibrio vulgaris Miyazaki F

The catalytic center of the [NiFe] hydrogenase of Desulfovibrio vulgaris Miyazaki F in the oxidized states was investigated by electron paramagnetic resonance and electron-nuclear double resonance spectroscopy applied to single crystals of the enzyme. The experimental results were compared with density functional theory (DFT) calculations. For the Ni-B state, three hyperfine tensors could be determined. Two tensors have large isotropic hyperfine coupling constants and are assigned to the beta-CH2 protons of the Cys-549 that provides one of the bridging sulfur ligands between Ni and Fe in the active center. From a comparison of the orientation of the third hyperfine tensor with the tensor obtained from DFT calculations an OH- bridging ligand has been identified in the Ni-B state. For the Ni-A state broader signals were observed. The signals of the third proton, as observed for the "ready" state Ni-B, were not observed at the same spectral position for Ni-A, confirming a structural difference involving the bridging ligand in the "unready" state of the enzyme.

Activation Process of [NiFe] Hydrogenase Elucidated by High-Resolution X-Ray Analyses: Conversion of the Ready to the Unready State

Hydrogenases catalyze oxidoreduction of molecular hydrogen and have potential applications for utilizing dihydrogen as an energy source. [NiFe] hydrogenase has two different oxidized states, Ni-A (unready, exhibits a lag phase in reductive activation) and Ni-B (ready). We have succeeded in converting Ni-B to Ni-A with the use of Na2S and O2 and determining the high-resolution crystal structures of both states. Ni-B possesses a monatomic nonprotein bridging ligand at the Ni-Fe active site, whereas Ni-A has a diatomic species. The terminal atom of the bridging species of Ni-A occupies a similar position as C of the exogenous CO in the CO complex (inhibited state). The common features of the enzyme structures at the unready (Ni-A) and inhibited (CO complex) states are proposed. These findings provide useful information on the design of new systems of biomimetic dihydrogen production and fuel cell devices.

Single crystal EPR studies of the reduced active site of [NiFe] hydrogenase from Desulfovibrio vulgaris Miyazaki F

In the catalytic cycle of [NiFe] hydrogenase the paramagnetic Ni-C intermediate is of key importance, since it is believed to carry the substrate hydrogen, albeit in a yet unknown geometry. Upon illumination at low temperatures, Ni-C is converted to the so-called Ni-L state with markedly different spectroscopic parameters. It is suspected that Ni-L has lost the "substrate hydrogen". In this work, both paramagnetic states have been generated in single crystals obtained from the [NiFe] hydrogenase from Desulfovibrio vulgaris Miyazaki F. Evaluation of the orientation dependent spectra yielded the magnitudes of the g tensors and their orientations in the crystal axes system for both Ni-C and Ni-L. The g tensors could further be related to the atomic structure by comparison with the X-ray crystallographic structure of the reduced enzyme. Although the g tensor magnitudes of Ni-C and Ni-L are quite different, the orientations of the resulting g tensors are very similar but differ from those obtained earlier for Ni-A and Ni-B (Trofanchuk et al. J. Biol. Inorg. Chem. 2000, 5, 36-44). The g tensors were also calculated by density functional theory (DFT) methods using various structural models of the active site. The calculated g tensor of Ni-C is, concerning magnitudes and orientation, in good agreement with the experimental one for a formal Ni(III) oxidation state with a hydride (H(-)) bridge between the Ni and the Fe atom. Satisfying agreement is obtained for the Ni-L state when a formal Ni(I) oxidation state is assumed for this species with a proton (H(+)) removed from the bridge between the nickel and the iron atom.

The crystal structure of the hexadeca-heme cytochrome Hmc and a structural model of its complex with cytochrome c(3)

Sulfate-reducing bacteria contain a variety of multi-heme c-type cytochromes. The cytochrome of highest molecular weight (Hmc) contains 16 heme groups and is part of a transmembrane complex involved in the sulfate respiration pathway. We present the 2.42 A resolution crystal structure of the Desulfovibrio vulgaris Hildenborough cytochrome Hmc and a structural model of the complex with its physiological electron transfer partner, cytochrome c(3), obtained by NMR restrained soft-docking calculations. The Hmc is composed of three domains, which exist independently in different sulfate-reducing species, namely cytochrome c(3), cytochrome c(7), and Hcc. The complex involves the last heme at the C-terminal region of the V-shaped Hmc and heme 4 of cytochrome c(3), and represents an example for specific cytochrome-cytochrome interaction.

Structural Studies of the Carbon Monoxide Complex of [NiFe]hydrogenase from Desulfovibrio vulgaris Miyazaki F: Suggestion for the Initial Activation Site for Dihydrogen

The carbon monoxide complex of [NiFe]hydrogenase from Desulfovibrio vulgaris Miyazaki F has been characterized by X-ray crystallography and absorption and resonance Raman spectroscopy. Nine crystal structures of the [NiFe]hydrogenase in the CO-bound and CO-liberated forms were determined at 1.2-1.4 A resolution. The exogenously added CO was assigned to be bound to the Ni atom at the Ni-Fe active site. The CO was not replaced with H(2) in the dark at 100 K, but was liberated by illumination with a strong white light. The Ni-C distances and Ni-C-O angles were about 1.77 A and 160 degrees, respectively, except for one case (1.72 A and 135 degrees ), in which an additional electron density peak between the CO and Sgamma(Cys546) was recognized. Distinct changes were observed in the electron density distribution of the Ni and Sgamma(Cys546) atoms between the CO-bound and CO-liberated structures for all the crystals tested. The novel structural features found near the Ni and Sgamma(Cys546) atoms suggest that these two atoms at the Ni-Fe active site play a role during the initial H(2)-binding process. Anaerobic addition of CO to dithionite-reduced [NiFe]hydrogenase led to a new absorption band at about 470 nm ( approximately 3000 M(-1)cm(-1)). Resonance Raman spectra (excitation at 476.5 nm) of the CO complex revealed CO-isotope-sensitive bands at 375/393 and 430 cm(-1) (368 and 413 cm(-1) for (13)C(18)O). The frequencies and relative intensities of the CO-related Raman bands indicated that the exogenous CO is bound to the Ni atom with a bent Ni-C-O structure in solution, in agreement with the refined structure determined by X-ray crystallography.

The presence of a SO molecule in [NiFe] hydrogenase from Desulfovibrio vulgaris Miyazaki as detected by mass spectrometry

The active site of [NiFe] hydrogenase is a binuclear metal complex composed of Fe and Ni atoms and is called the Ni-Fe site, where the Fe atom is known to be coordinated to three diatomic ligands. Two mass spectrometric techniques, pyrolysis-MS (pyrolysis-mass spectrometry) and TOF-SIMS (time-of-flight secondary ion mass spectrometry), were applied to several proteins, including native and denatured forms of [NiFe] hydrogenase from Desulfovibrio vulgaris Miyazaki F, [Fe4S4]2-ferredoxin from Clostridium pasteurianum, [Fe,S2]-ferredoxin from Spirulna platensis, and porcine pepsin. Pyrolysis-MS revealed that only native hydrogenase liberated SO/SO2 (ions of m/z 48 and 64 at an equilibrium ratio of SO and SO2) at relatively low temperatures before the covalent bonds in the polypeptide moiety started to decompose. TOF-SIMS indicated that native Miyazaki hydrogenase released SO/SO2 (m/z 47.97 and 63.96) as secondary ions when irradiated with a high-energy Ga+ beam. Denatured hydrogenase, clostridial ferredoxin, and pepsin did not release SO as a secondary ion. The FT-IR spectrum of the enzyme suggested the presence of CO and CN. These lines of evidence suggest that the three diatomic ligands coordinated to the Fe atom at the Ni-Fe site in Miyazaki hydrogenase are SO, CO, and CN. The role of the SO ligand in helping to cleave H2 molecules at the active site and stabilizing the Fe atom in the diamagnetic Fe(II) state in the redox cycle of this enzyme is discussed.

Removal of the bridging ligand atom at the Ni-Fe active site of [NiFe] hydrogenase upon reduction with H2, as revealed by X-ray structure analysis at 1.4 A resolution

BACKGROUND

The active site of [NiFe] hydrogenase, a heterodimeric protein, is suggested to be a binuclear Ni-Fe complex having three diatomic ligands to the Fe atom and three bridging ligands between the Fe and Ni atoms in the oxidized form of the enzyme. Two of the bridging ligands are thiolate sidechains of cysteinyl residues of the large subunit, but the third bridging ligand was assigned as a non-protein monatomic sulfur species in Desulfovibrio vulgaris Miyazaki F hydrogenase.

RESULTS

The X-ray crystal structure of the reduced form of D. vulgaris Miyazaki F [NiFe] hydrogenase has been solved at 1.4 A resolution and refined to a crystallographic R factor of 21.8%. The overall structure is very similar to that of the oxidized form, with the exception that the third monatomic bridge observed at the Ni-Fe site in the oxidized enzyme is absent, leaving this site unoccupied in the reduced form.

CONCLUSIONS

The unusual ligand structure found in the oxidized form of D. vulgaris Miyazaki F [NiFe] hydrogenase was confirmed in the reduced form of the enzyme, with the exception that the electron density assigned to the monatomic sulfur bridge had almost disappeared. On the basis of this finding, as well as the observation that H2S is liberated from the oxidized enzyme under an atmosphere of H2 in the presence of its electron carrier, it was postulated that the monatomic sulfur bridge must be removed for the enzyme to be activated. A possible mechanism for the catalytic action of the hydrogenase is proposed.

Liberation of hydrogen sulfide during the catalytic action of Desulfovibrio hydrogenase under the atmosphere of hydrogen

The active site of [NiFe] hydrogenase from Desulfovibrio species is composed of a binuclear Ni-Fe complex bearing three diatomic nonprotein ligands to Fe and three bridges between the two metals, two of which are thiolate side chains of the protein moiety. The third bridging atom in the enzyme isolated from D. vulgaris Miyazaki F was suggested to be sulfur species, but was suggested to be oxygen species in D. gigas enzyme. When the hydrogenase from D. vulgaris Miyazaki F was incubated under the atmosphere of H2, H2S was liberated from the enzyme only in the presence of its electron carrier, cytochrome c3 or methylviologen. The amount of H2S liberation was little in the absence of electron carrier or essentially null when the enzyme was incubated under N2. The amount of H2S liberated was about 37% of the hydrogenase contained in the reaction vial in molar basis. These observations are in agreement with the recent observation that the third bridging site at the Ni-Fe active site is vacant in the reduced form of the enzyme revealed by X-ray crystallography.

Unusual ligand structure in Ni-Fe active center and an additional Mg site in hydrogenase revealed by high resolution X-ray structure analysis

BACKGROUND

The hydrogenase of Desulfovibrio sp. catalyzes the reversible oxidoreduction of molecular hydrogen, in conjunction with a specific electron acceptor, cytochrome c3. The Ni-Fe active center of Desulfovibrio hydrogenase has an unusual ligand structure with non-protein ligands. An atomic model at high resolution is required to make concrete assignment of the ligands which coordinate the Ni-Fe center. These in turn will provide insight into the mechanism of electron transfer, during the reaction catalysed by hydrogenase.

RESULTS

The X-ray structure of the hydrogenase from Desulfovibrio vulgaris Miyazaki has been solved at 1.8 A resolution and refined to a crystallographic R factor of 0.229. The overall folding pattern and the spatial arrangement of the metal centers are very similar to those found in Desulfovibrio gigas hydrogenase. This high resolution crystal structure enabled us to assign the non-protein ligands to the Fe atom in the Ni-Fe site and revealed the presence of a Mg center, located approximately 13 A from the Ni-Fe active center.

CONCLUSIONS

From the nature of the electron-density map, stereochemical geometry and atomic parameters of the refined structure, the most probable candidates for the four ligands, coordinating the Ni-Fe center, have been proposed to be diatomic S=O, C triple bond O and C triple bond N molecules and one sulfur atom. The assignment was supported by pyrolysis mass spectrometry measurements. These ligands may have a role as an electron sink during the electron transfer reaction between the hydrogenase and its biological counterparts, and they could stabilize the redox state of Fe(II), which may not change during the catalytic cycle and is independent of the redox transition of the Ni. The hydrogen-bonding system between the Ni-Fe and the Mg centers suggests the possible.

Redox properties of the iron-sulfur clusters in activated Fe-hydrogenase from Desulfovibrio vulgaris (Hildenborough)

The periplasmic Fe-hydrogenase from Desulfovibrio vulgaris (Hildenborough) contains three iron-sulfur prosthetic groups: two putative electron transferring [4Fe-4S] ferredoxin-like cubanes (two F-clusters), and one putative Fe/S supercluster redox catalyst (one H-cluster). Combined elemental analysis by proton-induced X-ray emission, inductively coupled plasma mass spectrometry, instrumental neutron activation analysis, atomic absorption spectroscopy and colorimetry establishes that elements with Z > 21 (except for 12-15 Fe) are present in 0.001-0.1 mol/mol quantities, not correlating with activity. Isoelectric focussing reveals the existence of multiple charge conformers with pI in the range 5.7-6.4. Repeated re-chromatography results in small amounts of enzyme of very high H2-production activity determined under standardized conditions (approximately 7000 U/mg). The enzyme exists in two different catalytic forms: as isolated the protein is 'resting' and O2-insensitive; upon reduction the protein becomes active and O2-sensitive. EPR-monitored redox titrations have been carried out of both the resting and the activated enzyme. In the course of a reductive titration, the resting protein becomes activated and begins to produce molecular hydrogen at the expense of reduced titrant. Therefore, equilibrium potentials are undefined, and previously reported apparent Em and n values [Patil, D. S., Moura, J. J. G., He, S. H., Teixeira, M, Prickril, B. C., DerVartanian, D. V., Peck, H. D. Jr, LeGall, J. & Huynh, B.-H. (1988) J. Biol. Chem. 263, 18,732-18,738] are not thermodynamic quantities. In the activated enzyme an S = 1/2 signal (g = 2.11, 2.05, 2.00; 0.4 spin/protein molecule), attributed to the oxidized H cluster, exhibits a single reduction potential, Em,7 = -307 mV, just above the onset potential of H2 production. The midpoint potential of the two F clusters (2.0 spins/protein molecule) has been determined either by titrating active enzyme with the H2/H+ couple (E,m = -330 mV) or by dithionite-titrating a recombinant protein that lacks the H-cluster active site (Em,7.5 = -340 mV). There is no significant redox interaction between the two F clusters (n approximately 1).

XELE--a polypeptide model-building program for a graphics workstation

A model-building program, XELE, for use in protein crystallography has been written in C under UNIX on a graphics workstation. This program makes full use of the X Window system to display the electron density distribution and to manipulate the polypeptide model, and therefore is named XELE. It utilizes a fast three-dimensional rendering package, Dorè, and is portable to other types of graphics workstations. A part of the program for the man-machine interface uses the library of X Window and X Toolkit, and therefore is highly interactive. The structure analysis program package, PROTEIN, is also implemented in an interactive mode using X Window, and has been interfaced with XELE.

EPR and redox properties of Desulfovibrio vulgaris Miyazaki hydrogenase: comparison with the Ni-Fe enzyme from Desulfovibrio gigas

We have carried out a detailed redox titration monitored by EPR on the hydrogenase from Desulfovibrio vulgaris Miyazaki. Typical 3Fe and nickel signals have been observed, which are very similar to those given by Desulfovibrio gigas hydrogenase in all the characteristic redox states of the enzyme. This confirms that D. vulgaris Miyazaki hydrogenase is a Ni-Fe enzyme closely related to that from D. gigas, as was recently proposed on the basis of sequence comparisons (Deckers, H.M., Wilson, F.R. and Voordouw, G. (1990) J. Gen. Microb. 136, 2021-2028).

Structure-function relationships among the nickel-containing hydrogenases

The enzymology of the heterodimeric (NiFe) and (NiFeSe) hydrogenases, the monomeric nickel-containing hydrogenases plus the multimeric F420-(NiFe) and NAD(+)-(NiFe) hydrogenases are summarized and discussed in terms of subunit localization of the redox-active nickel and non-heme iron clusters. It is proposed that nickel is ligated solely by amino acid residues of the large subunit and that the non-heme iron clusters are ligated by other cysteine-rich polypeptides encoded in the hydrogenase operons which are not necessarily homologous in either structure or function. Comparison of the hydrogenase operons or putative operons and their hydrogenase genes indicate that the arrangement, number and types of genes in these operons are not conserved among the various types of hydrogenases except for the gene encoding the large subunit. Thus, the presence of the gene for the large subunit is the sole feature common to all known nickel-containing hydrogenases and unites these hydrogenases into a large but diverse gene family. Although the different genes for the large subunits may possess only nominal general derived amino acid homology, all large subunit genes sequenced to date have the sequence R-X-C-X-X-C fully conserved in the amino terminal region of the polypeptide chain and the sequence of D-P-C-X-X-C fully conserved in the carboxyl terminal region. It is proposed that these conserved motifs of amino acids provide the ligands required for the binding of the redox-active nickel. The existing EXAFS (Extended X-ray Absorption Fine Structure) information is summarized and discussed in terms of the numbers and types of ligands to the nickel and the various redox species of nickel defined by EPR spectroscopy. New information concerning the ligands to nickel is presented based on site-directed mutagenesis of the gene encoding the large subunit of the (NiFe) hydrogenase-1 of Escherichia coli. Based on considerations of the biochemical, molecular and biophysical information, ligand environments of the nickel in different redox states of the (NiFe) hydrogenase are proposed.

Three-dimensional structure of the nickel-containing hydrogenase from Thiocapsa roseopersicina

The three-dimensional structure of the nickel-containing hydrogenase from Thiocapsa roseopersicina has been determined at a resolution of 2 nm in the plane and 4 nm in the vertical direction by electron microscopy and computerized image processing on microcrystals of the enzyme. The enzyme forms a large ring-shaped complex containing six each of the large (62-kDa) and small (26-kDa) subunits. The complex is very open, with six well-separated dumbbell-shaped masses surrounding a large cylindrical hole. Each dumbbell is interpreted as consisting of one large and one small subunit.

The structure and mechanism of iron-hydrogenases

Hydrogenases devoid of nickel and containing only Fe-S clusters have been found so far only in some strictly anaerobic bacteria. Four Fe-hydrogenases have been characterized: from Megasphaera elsdenii, Desulfovibrio vulgaris (strain Hildenborough), and two from Clostridium pasteurianum. All contain two or more [4Fe-4S]1+,2+ or F clusters and a unique type of Fe-S center termed the H cluster. The H cluster appears to be remarkably similar in all the hydrogenases, and is proposed as the site of H2 oxidation and H2 production. The F clusters serve to transfer electrons between the H cluster and the external electron carrier. In all of the hydrogenases the H cluster is comprised of at least three Fe atoms, and possibly six. In the oxidized state it contains two types of magnetically distinct Fe atoms, has an S = 1/2 spin state, and exhibits a novel rhombic EPR signal. The reduced cluster is diamagnetic (S = 0). The oxidized H cluster appears to undergo a conformation change upon reduction with H2 with an increase in Fe-Fe distances of about 0.5 A. Studies using resonance Raman, magnetic circular dichroism and electron spin echo spectroscopies suggest that the H cluster has significant non-sulfur coordination. The H cluster has two binding sites for CO, at least one of which can also bind O2. Binding to one site changes the EPR properties of the cluster and gives a photosensitive adduct, but does not affect catalytic activity. Binding to the other site, which only becomes exposed during the catalytic cycle, leads to loss of catalytic activity. Mechanisms of H2 activation and electron transfer are proposed to explain the effects of CO binding and the ability of one of the hydrogenases to preferentially catalyze H2 oxidation.

The three classes of hydrogenases from sulfate-reducing bacteria of the genus Desulfovibrio

Three types of hydrogenases have been isolated from the sulfate-reducing bacteria of the genus Desulfovibrio. They differ in their subunit and metal compositions, physico-chemical characteristics, amino acid sequences, immunological reactivities, gene structures and their catalytic properties. Broadly, the hydrogenases can be considered as 'iron only' hydrogenases and nickel-containing hydrogenases. The iron-sulfur-containing hydrogenase ([Fe] hydrogenase) contains two ferredoxin-type (4Fe-4S) clusters and an atypical iron-sulfur center believed to be involved in the activation of H2. The [Fe] hydrogenase has the highest specific activity in the evolution and consumption of hydrogen and in the proton-deuterium exchange reaction and this enzyme is the most sensitive to CO and NO2-. It is not present in all species of Desulfovibrio. The nickel-(iron-sulfur)-containing hydrogenases [( NiFe] hydrogenases) possess two (4Fe-4S) centers and one (3Fe-xS) cluster in addition to nickel and have been found in all species of Desulfovibrio so far investigated. The redox active nickel is ligated by at least two cysteinyl thiolate residues and the [NiFe] hydrogenases are particularly resistant to inhibitors such as CO and NO2-. The genes encoding the large and small subunits of a periplasmic and a membrane-bound species of the [NiFe] hydrogenase have been cloned in Escherichia (E.) coli and sequenced. Their derived amino acid sequences exhibit a high degree of homology (70%); however, they show no obvious metal-binding sites or homology with the derived amino acid sequence of the [Fe] hydrogenase. The third class is represented by the nickel-(iron-sulfur)-selenium-containing hydrogenases [( NiFe-Se] hydrogenases) which contain nickel and selenium in equimolecular amounts plus (4Fe-4S) centers and are only found in some species of Desulfovibrio. The genes encoding the large and small subunits of the periplasmic hydrogenase from Desulfovibrio (D.) baculatus (DSM 1743) have been cloned in E. coli and sequenced. The derived amino acid sequence exhibits homology (40%) with the sequence of the [NiFe] hydrogenase and the carboxy-terminus of the gene for the large subunit contains a codon (TGA) for selenocysteine in a position homologous to a codon (TGC) for cysteine in the large subunit of the [NiFe] hydrogenase. EXAFS and EPR studies with the 77Se-enriched D. baculatus hydrogenase indicate that selenium is a ligand to nickel and suggest that the redox active nickel is ligated by at least two cysteinyl thiolate and one selenocysteine selenolate residues.(ABSTRACT TRUNCATED AT 400 WORDS)

Characterization and complete amino acid sequence of ferredoxin II from Desulfovibrio vulgaris Miyazaki

One of 2 ferredoxins, Fd II, purified from Desulfovibrio vulgaris Miyazaki (DvM) has been characterized and its complete amino acid sequence established. Fd II is composed of 63 amino acid residues and contains 7 cysteinyl residues but has only 4 iron atoms in an iron-sulfur cluster of a standard redox potential of -405 mV. The arrangement of cysteinyl residues in the protein suggests that some cysteinyl residues are not directly involved in ligation to the iron-sulfur cluster. Homology is recognized among Fd II (DvM), Fd I (D. desulfuricans Norway), Fd I (D. africanus Benghazi), and Fd (D. gigas). Although Fd I and Fd II in DvM are poorly homologous, the C-terminal half of Fd I is fairly homologous to the N-terminal half of Fd II. Fd II is 40% as effective as Fd I as an electron carrier for pyruvate dehydrogenase coupled with hydrogenase and cytochrome c3.