Thermophilic DNA ligase. Purification and properties of the enzyme from Thermus thermophilus HB8

Detection of the phosphorothioate oligonucleotide fomivirsen using a ligase detection reaction with polymerase chain reaction

This study aimed to develop a simple and sensitive detection method for fomivirsen, a 21-nucleotide phosphorothioate oligonucleotide used as a nucleic acid medicine, using a ligase detection reaction. A ligation probe was designed to hybridize with fomivirsen and polymerase chain reaction (PCR) primers, with a deoxyuridine part between the primer binding sites. The probe was ligated to a circular product by Taq DNA ligase, and the resulting product was converted to a linear form through the removal of the uracil base using uracil DNA glycosylase. The linear product was then quantified using real-time PCR. The developed method could detect 0.025-6.4 nM of fomivirsen in water and HeLa genomic DNA solutions and 0.6-160 nM of fomivirsen in mouse serum in combination with an extraction method based on alkalinization and neutralization. This method could be useful for not only detecting fomivirsen but also other functional oligonucleotides composed of phosphorothioate oligonucleotides. In summary, this study presents a practical and effective approach to the detection of the nucleic acid medicine fomivirsen.

Specific metabolic and cellular mechanisms of the vegetative desiccation tolerance in resurrection plants for adaptation to extreme dryness

MAIN CONCLUSION

Substantial advancements have been made in our comprehension of vegetative desiccation tolerance in resurrection plants, and further research is still warranted to elucidate the mechanisms governing distinct cellular adaptations. Resurrection plants are commonly referred to as a small group of extremophile vascular plants that exhibit vegetative desiccation tolerance (VDT), meaning that their vegetative tissues can survive extreme drought stress (> 90% water loss) and subsequently recover rapidly upon rehydration. In contrast to most vascular plants, which typically employ water-saving strategies to resist partial water loss and optimize water absorption and utilization to a limited extent under moderate drought stress, ultimately succumbing to cell death when confronted with severe and extreme drought conditions, resurrection plants have evolved unique mechanisms of VDT, enabling them to maintain viability even in the absence of water for extended periods, permitting them to rejuvenate without harm upon water contact. Understanding the mechanisms associated with VDT in resurrection plants holds the promise of expanding our understanding of how plants adapt to exceedingly arid environments, a phenomenon increasingly prevalent due to global warming. This review offers an updated and comprehensive overview of recent advances in VDT within resurrection plants, with particular emphasis on elucidating the metabolic and cellular adaptations during desiccation, including the intricate processes of cell wall folding and the prevention of cell death. Furthermore, this review highlights existing unanswered questions in the field, suggests potential avenues for further research to gain deeper insights into the remarkable VDT adaptations observed in resurrection plants, and highlights the potential application of VDT-derived techniques in crop breeding to enhance tolerance to extreme drought stress.

Molecular cloning and characterization of Pcal_0039, an ATP-/NAD+-independent DNA ligase from hyperthermophilic archaeon Pyrobaculum calidifontis

The genome sequence of hyperthermophilic archaeon Pyrobaculum calidifontis contains an open reading frame, Pcal_0039, which encodes a putative DNA ligase. Structural analysis disclosed the presence of signature sequences of ATP-dependent DNA ligases. We have heterologously expressed Pcal_0039 gene in Escherichia coli. The recombinant protein, majorly produced in soluble form, was purified and functionally characterized. Recombinant Pcal_0039 displayed nick-joining activity between 40 and 85 °C. Optimal activity was observed at 70 °C and pH 5.5. Nick-joining activity was retained even after heating for 1 h at 90 °C, indicating highly thermostable nature of Pcal_0039. The nick-joining activity, displayed by Pcal_0039, was metal ion dependent and Mg2+ was the most preferred. NaCl and KCl inhibited the nick-joining activity at or above 200 mmol/L. The activity catalyzed by recombinant Pcal_0039 was independent of addition of ATP or NAD+ or any other nucleotide cofactor. A mismatch adjacent to the nick, either at 3'- or 5'-end, abolished the nick-joining activity. These characteristics make Pcal_0039 a potential candidate for applications in DNA diagnostics. To the best of our knowledge, Pcal_0039 is the only DNA ligase, characterized from genus Pyrobaculum, which exhibits optimum nick-joining activity at pH below 6.0 and independent of any nucleotide cofactor.

Thermostable DNA ligases from hyperthermophiles in biotechnology

DNA ligase is an important enzyme ubiquitous in all three kingdoms of life that can ligate DNA strands, thus playing essential roles in DNA replication, repair and recombination in vivo. In vitro, DNA ligase is also used in biotechnological applications requiring in DNA manipulation, including molecular cloning, mutation detection, DNA assembly, DNA sequencing, and other aspects. Thermophilic and thermostable enzymes from hyperthermophiles that thrive in the high-temperature (above 80°C) environments have provided an important pool of useful enzymes as biotechnological reagents. Similar to other organisms, each hyperthermophile harbors at least one DNA ligase. In this review, we summarize recent progress on structural and biochemical properties of thermostable DNA ligases from hyperthermophiles, focusing on similarities and differences between DNA ligases from hyperthermophilic bacteria and archaea, and between these thermostable DNA ligases and non-thermostable homologs. Additionally, altered thermostable DNA ligases are discussed. Possessing improved fidelity or thermostability compared to the wild-type enzymes, they could be potential DNA ligases for biotechnology in the future. Importantly, we also describe current applications of thermostable DNA ligases from hyperthermophiles in biotechnology.

Assembling Multiple Fragments: The Gibson Assembly

The Gibson Assembly is a popular method for molecular cloning which has been developed specifically to join several fragments together in a specific order, without the constraint of restriction enzyme sites. This method is based on the assembly of overlapping fragments, generally produced by PCR, and then combining them using three enzymes: a 5' exonuclease, a DNA polymerase, and a DNA ligase, in an isothermal reaction. Here, we describe this method, including the design of primers for the generation of the overlapping fragments and the assembly; to this end, we provide an example involving joining two fragments in a single plasmid.

DNA synthesis technologies to close the gene writing gap

Synthetic DNA is of increasing demand across many sectors of research and commercial activities. Engineering biology, therapy, data storage and nanotechnology are set for rapid developments if DNA can be provided at scale and low cost. Stimulated by successes in next generation sequencing and gene editing technologies, DNA synthesis is already a burgeoning industry. However, the synthesis of >200 bp sequences remains unaffordable. To overcome these limitations and start writing DNA as effectively as it is read, alternative technologies have been developed including molecular assembly and cloning methods, template-independent enzymatic synthesis, microarray and rolling circle amplification techniques. Here, we review the progress in developing and commercializing these technologies, which are exemplified by innovations from leading companies. We discuss pros and cons of each technology, the need for oversight and regulatory policies for DNA synthesis as a whole and give an overview of DNA synthesis business models.

Recent developments on UDP-N-acetylmuramoyl-L-alanine-D-gutamate ligase (Mur D) enzyme for antimicrobial drug development: An emphasis on in-silico approaches

Introduction

The rapid emergence of antibiotic resistance among various bacterial pathogens has been one of the major concerns of health organizations across the world. In this context, for the development of novel inhibitors against antibiotic-resistant bacterial pathogens, UDP-N-Acetylmuramoyl-L-Alanine-D-Glutamate Ligase (MurD) enzyme represents one of the most apposite targets.

Body

The present review focuses on updated advancements on MurD-targeted inhibitors in recent years along with genetic regulation, structural and functional characteristics of the MurD enzyme from various bacterial pathogens. A concise account of various crystal structures of MurD enzyme, submitted into Protein Data Bank is also discussed.

Discussion

MurD, an ATP dependent cytoplasmic enzyme is an important target for drug discovery. The genetic organization of MurD enzyme is well elucidated and many crystal structures of MurD enzyme are submitted into Protein Data bank. Various inhibitors against MurD enzyme have been developed so far with an increase in the use of in-silico methods in the recent past. But cell permeability barriers and conformational changes of MurD enzyme during catalytic reaction need to be addressed for effective drug development. So, a combination of in-silico methods along with experimental work is proposed to counter the catalytic machinery of MurD enzyme.

High-Throughput Generation of In Silico Derived Synthetic Antibodies via One-step Enzymatic DNA Assembly of Fragments

Phage-display technology offers robust methods for isolating antibody (Ab) molecules with specificity for different target antigens. Recent advancements couple Ab selections with in silico strategies, such as predictive computational models or next-generation sequencing metadata analysis of Ab selections. These advancements result in enhanced Ab clonal diversities with potential for enlarged epitope coverage of the target antigen. A current limitation however, is that de novo Ab sequences must undergo DNA gene synthesis, and subsequent expression as Ab proteins for downstream validations. Due to the high costs and time for commercially generating large sets of DNA genes, we report a high-throughput platform for the synthesis of in silico derived Ab clones. As a proof of concept we demonstrate the simultaneous synthesis of 96 unique Abs with varied lengths and complementary determining region compositions. Each of the 96 Ab clones undergoes a one-step enzymatic assembly of distinct DNA fragments that combine into a circularized Fab expression plasmid. This strategy allows for the rapid and efficient synthesis of 96 DNA constructs in a 3 day window, and exhibits high percentage fidelity-greater than 93%. Accordingly, the synthesis of Ab DNA constructs as Fab expression plasmids allow for rapid execution of downstream Ab protein validations, with potential for implementation into high-throughput Ab protein characterization pipelines. Altogether, the platform presented here proves rapid and also cost-effective, which is important for labs with limited resources, since it utilizes standard laboratory equipment and molecular reagents.

Ligation and Ligases

DNA ligases are used chiefly to create novel combinations of nucleic acid molecules and to attach them to vectors before molecular cloning. They are either of bacterial origin or bacteriophage encoded and have different properties, as discussed here.

Machine Learning Applied to Predicting Microorganism Growth Temperatures and Enzyme Catalytic Optima

Enzymes that catalyze chemical reactions at high temperatures are used for industrial biocatalysis, applications in molecular biology, and as highly evolvable starting points for protein engineering. The optimal growth temperature (OGT) of organisms is commonly used to estimate the stability of enzymes encoded in their genomes, but the number of experimentally determined OGT values are limited, particularly for thermophilic organisms. Here, we report on the development of a machine learning model that can accurately predict OGT for bacteria, archaea, and microbial eukaryotes directly from their proteome-wide 2-mer amino acid composition. The trained model is made freely available for reuse. In a subsequent step we use OGT data in combination with amino acid composition of individual enzymes to develop a second machine learning model-for prediction of enzyme catalytic temperature optima ( T_opt). The resulting model generates enzyme T_opt estimates that are far superior to using OGT alone. Finally, we predict T_opt for 6.5 million enzymes, covering 4447 enzyme classes, and make the resulting data set available to researchers. This work enables simple and rapid identification of enzymes that are potentially functional at extreme temperatures.

Pol I DNA polymerases stimulate DNA end-joining by Escherichia coli DNA ligase

Klenow and Klentaq are the large fragment domains of the Pol I DNA polymerases from Escherichia coli and Thermus aquaticus, respectively. Herein, we show that both polymerases can significantly stimulate complementary intermolecular end-joining ligations by E.coli DNA ligase when the polymerases are present at concentrations lower than that of the DNA substrates. In contrast, high polymerase concentrations relative to the DNA substrates inhibit the intermolecular ligation activity of DNA ligase. Neither polymerase was able to stimulate the DNA ligase from T4 bacteriophage. Additionally, nick-closure by E. coli DNA ligase (but not T4 ligase) is slightly stimulated by both polymerases, but only at about 10% of the magnitude seen for end-joining enhancement. The data represent one of the first observations of direct polymerase-ligase interactions in prokaryotes, and suggest that the polymerases stabilize the associated DNA ends during intermolecular ligation, and that such a complex can be taken advantage of by some, but not all, DNA ligases.

Cloning of intronic sequence within DsRed2 increased the number of cells expressing red fluorescent protein

AIM

Cloning of artificial intronic sequence within the open reading frame (ORF) of DsRed2 gene.

METHOD

Splice prediction software was used to analyze DsRed2 sequence to find an ideal site for cloning artificial intronic sequence. Intron was cloned within DsRed2 using cyclic ligation assembly. Flow cytometry was used to quantify the number of cells expressing red fluorescence.

RESULT

Sequencing data confirmed precise cloning of intron at the desired position using cyclic ligation assembly. Successful expression of red fluorescence after cloning of intron confirmed successful intron recognition and splicing by host cell line. Cloning of intron increased the number of cells expressing red fluorescent protein.

CONCLUSION

Cloning of intronic sequence within DsRed2 has helped to increase the number of cells expressing red fluorescence by approximately four percent.

A rapid and simple method for DNA engineering using cycled ligation assembly

DNA assembly techniques have developed rapidly, enabling efficient construction of complex constructs that would be prohibitively difficult using traditional restriction-digest based methods. Most of the recent methods for assembling multiple DNA fragments in vitro suffer from high costs, complex set-ups, and diminishing efficiency when used for more than a few DNA segments. Here we present a cycled ligation-based DNA assembly protocol that is simple, cheap, efficient, and powerful. The method employs a thermostable ligase and short Scaffold Oligonucleotide Connectors (SOCs) that are homologous to the ends and beginnings of two adjacent DNA sequences. These SOCs direct an exponential increase in the amount of correctly assembled product during a reaction that cycles between denaturing and annealing/ligating temperatures. Products of early cycles serve as templates for later cycles, allowing the assembly of many sequences in a single reaction. To demonstrate the method’s utility, we directed the assembly of twelve inserts, in one reaction, into a transformable plasmid. All the joints were precise, and assembly was scarless in the sense that no nucleotides were added or missing at junctions. Simple, efficient, and low-cost cycled ligation assemblies will facilitate wider use of complex genetic constructs in biomedical research.

Heat-stable enzymes from extremely thermophilic and hyperthermophilic microorganisms

Only in the last decade have microorganisms been discovered which grow near or above 100°C. The enzymes that are formed by these extremely thermophilic (growth temperature 65 to 85°C) and hyperthermophilic (growth temperature 85 to 110°C) microorganisms are of great interest. This review covers the extracellular and intracellular enzymes of these exotic microorganisms that have recently been described. Polymer-hydrolysing enzymes, such as amylolytic, cellulolytic, hemicellulolytic and proteolytic enzymes, will be discussed. In addition, the properties of the intracellular enzymes involved in carbohydrate and amino-acid metabolism and DNA-binding and chaperones and chaperone-like proteins from hyperthermophiles are described. Due to the unusual properties of these heat-stable enzymes, they are expected to fill the gap between biological and chemical processes.

Multiplex ligase-based genotyping methods combined with CE

In this genomic era, the ability to assay multiple genomic hot spots that have strong clinical implications is greatly desired. Conventional PCR-based methods suffer from frequent false-positive detections, particularly when a multiplex analysis is desirable. As an alternative to the error-prone conventional methods, multiplex ligase-based genotyping methods combined with CE have a strong potential. In this review, both previously developed methods and emerging methods are described to reveal the specificity, sensitivity, and simplicity of the ligase-based methods. For each step (ligation, amplification, and separation), the principles of several alternative methods are discussed along with their applications to explore the future development of ligase-based diagnostic methods.

DNA ligases from thermophilic bacteria enhance PCR amplification of long DNA sequences

Bacterial NAD-dependent Taq and Tth DNA ligases are capable of significantly increasing the yield of long PCR products when the amplification is carried out using bacterial family A DNA polymerases, e.g. Taq or Tth DNA polymerases, or with enzymatic blends containing these polymerases. We also show that Taq and Tth DNA ligases improve the results of PCR in the absence of NAD and therefore in the absence of DNA ligase activity. These observations suggest that bacterial DNA ligases can interact with these DNA polymerases, presumably as accessory proteins, thereby enhancing the efficiency of DNA polymerization.

Enzymes used in molecular biology: a useful guide

Since molecular cloning has become routine laboratory technique, manufacturers offer countless sources of enzymes to generate and manipulate nucleic acids. Thus, selecting the appropriate enzyme for a specific task may seem difficult to the novice. This review aims at providing the readers with some cues for understanding the function and specificities of the different sources of polymerases, ligases, nucleases, phosphatases, methylases, and topoisomerases used for molecular cloning. We provide a description of the most commonly used enzymes of each group, and explain their properties and mechanism of action. By pointing out key requirements for each enzymatic activity and clarifying their limitations, we aim at guiding the reader in selecting appropriate enzymatic source and optimal experimental conditions for molecular cloning experiments.

The enzymes from extreme thermophiles: bacterial sources, thermostabilities and industrial relevance

This review on enzymes from extreme thermophiles (optimum growth temperature greater than 65 degrees C) concentrates on their characteristics, especially thermostabilities, and their commercial applicability. The enzymes are considered in general terms first, with comments on denaturation, stabilization and industrial processes. Discussion of the enzymes subsequently proceeds in order of their E.C. classification: oxidoreductases, transferases, hydrolases, lyases, isomerases and ligases. The ramifications of cloned enzymes from extreme thermophiles are also discussed.

A non-isotopic method for the determination of activity of the thermostable NAD-dependent DNA ligase from Thermus thermophilus HB8

A simple and accurate method for determination of enzymatic activity of the NAD-dependent DNA ligase of Thermus thermophilus HB8 has been developed that requires no radiolabeled substrates. lambda-DNA digested with BstEII provides two substrate DNA molecules (fragments 1 and 4) containing 12 base pair cohesive ends that are stably annealed at the assay temperature of 45 degrees C. One cohesive end unit is defined as the amount of enzyme required to achieve 50% ligation of fragment 1 in 15 min at 45 degrees C. Percent ligation is determined by analysis of reaction products, produced in reactions containing serial dilutions of enzyme, separated by agarose gel electrophoresis and photographed using a digital imaging device. Imaging software quantifies the amounts of fragment 1 and non-substrate fragment 7 present in the each lane (reaction). The latter is used to normalize the amount of fragment 1. This normalization process corrects for variations in sample loading, electrophoretic artifacts, and optical distortion of the gel image. A negative control containing no enzyme allows calculation of percent substrate ligated into product. Unit activity is then calculated from a dose-response curve in which percent of fragment 1 ligated is plotted against the log(10) of the enzyme dilution factor.

Substrate recognition and fidelity of strand joining by an archaeal DNA ligase

We have previously identified a DNA ligase (LigTk) from a hyperthermophilic archaeon, Thermococcus kodakaraensis KOD1. The enzyme is the only characterized ATP-dependent DNA ligase from a hyperthermophile, and allows the analysis of enzymatic DNA ligation reactions at temperatures above the melting point of the substrates. Here we have focused on the interactions of LigTk with various DNA substrates, and its specificities toward metal cations. LigTk could utilize Mg2+, Mn2+, Sr2+ and Ca2+ as a metal cation, but not Co2+, Zn2+, Ni2+, or Cu2+. The enzyme displayed typical Michaelis-Menten steady-state kinetics with an apparent Km of 1.4 microm for nicked DNA. The kcat value of the enzyme was 0.11*s-1. Using various 3' hydroxyl group donors (L-DNA) and 5' phosphate group donors (R-DNA), we could detect ligation products as short as 16 nucleotides, the products of 7 + 9 nucleotide or 8 + 8 nucleotide combinations at 40 degrees C. An elevation in temperature led to a decrease in reaction efficiency when short oligonucleotides were used, suggesting that the formation of a nicked, double-stranded DNA substrate preceded enzyme-substrate recognition. LigTk was not inhibited by the addition of excess duplex DNA, implying that the enzyme did not bind strongly to the double-stranded ligation product after nick-sealing. In terms of reaction fidelity, LigTk was found to ligate various substrates with mismatched base-pairing at the 5' end of the nick, but did not show activity towards the 3' mismatched substrates. LigTk could not seal substrates with a 1-nucleotide or 2-nucleotide gap. Small amounts of ligation products were detected with DNA substrates containing a single nucleotide insertion, relatively more with the 5' insertions. The results revealed the importance of proper base-pairing at the 3' hydroxyl side of the nick for the ligation reaction by LigTk.

Fidelity of enzymatic ligation for DNA computing

We describe a convenient assay for rapid qualitative evaluation of hybridization/ligation fidelity. The approach uses randomized probe strands of DNA and restriction enzyme digestion after amplification of reaction products by the polymerase chain reaction (PCR). We report ligation efficiencies and fidelities of two DNA ligases, T4 DNA ligase and Thermus aquaticus (Taq) DNA ligase, over a range of temperatures.

Bacterial DNA ligases

DNA ligases join breaks in the phosphodiester backbone of DNA molecules and are used in many essential reactions within the cell. All DNA ligases follow the same reaction mechanism, but they may use either ATP or NAD+ as a cofactor. All Bacteria (eubacteria) contain NAD+-dependent DNA ligases, and the uniqueness of these enzymes to Bacteria makes them an attractive target for novel antibiotics. In addition to their NAD+-dependent enzymes, some Bacteria contain genes for putative ATP-dependent DNA ligases. The requirement for these different isozymes in Bacteria is unknown, but may be related to their utilization in different aspects of DNA metabolism. The putative ATP-dependent DNA ligases found in Bacteria are most closely related to proteins from Archaea and viruses. Phylogenetic analysis suggests that all NAD+-dependent DNA ligases are closely related, but the ATP-dependent enzymes have been acquired by Bacterial genomes on a number of separate occasions.

Cloning and functional characterization of an NAD(+)-dependent DNA ligase from Staphylococcus aureus

A Staphylococcus aureus mutant conditionally defective in DNA ligase was identified by isolation of complementing plasmid clones that encode the S. aureus ligA gene. Orthologues of the putative S. aureus NAD(+)-dependent DNA ligase could be identified in the genomes of Bacillus stearothermophilus and other gram-positive bacteria and confirmed the presence of four conserved amino acid motifs, including motif I, KXDG with lysine 112, which is believed to be the proposed site of adenylation. DNA sequence comparison of the ligA genes from wild type and temperature-sensitive S. aureus strain NT64 identified a single base alteration that is predicted to result in the amino acid substitution E46G. The S. aureus ligA gene was cloned and overexpressed in Escherichia coli, and the enzyme was purified to near homogeneity. NAD(+)-dependent DNA ligase activity was demonstrated with the purified enzyme by measuring ligation of (32)P-labeled 30-mer and 29-mer oligonucleotides annealed to a complementary strand of DNA. Limited proteolysis of purified S. aureus DNA ligase by thermolysin produced products with apparent molecular masses of 40, 22, and 21 kDa. The fragments were purified and characterized by N-terminal sequencing and mass analysis. The N-terminal fragment (40 kDa) was found to be fully adenylated. A fragment from residues 1 to 315 was expressed as a His-tagged fusion in E. coli and purified for functional analysis. Following deadenylation with nicotinamide mononucleotide, the purified fragment could self-adenylate but lacked detectable DNA binding activity. The 21- and 22-kDa C-terminal fragments, which lacked the last 76 amino acids of the DNA ligase, had no adenylation activity or DNA binding activity. The intact 30-kDa C terminus of the S. aureus LigA protein expressed in E. coli did demonstrate DNA binding activity. These observations suggest that, as in the case with the NAD(+)-dependent DNA ligase from B. stearothermophilus, two independent functional domains exist in S. aureus DNA ligase, consisting of separate adenylation and DNA binding activities. They also demonstrate a role for the extreme C terminus of the ligase in DNA binding. As there is much evidence to suggest that DNA ligase is essential for bacterial survival, its discovery in the important human pathogen S. aureus indicates its potential as a broad-spectrum antibacterial target for the identification of novel antibiotics.

A DNA ligase from a hyperthermophilic archaeon with unique cofactor specificity

A gene encoding DNA ligase (lig(Tk)) from a hyperthermophilic archaeon, Thermococcus kodakaraensis KOD1, has been cloned and sequenced, and its protein product has been characterized. lig(Tk) consists of 1,686 bp, corresponding to a polypeptide of 562 amino acids with a predicted molecular mass of 64,079 Da. Sequence comparison with previously reported DNA ligases and the presence of conserved motifs suggested that Lig(Tk) was an ATP-dependent DNA ligase. Phylogenetic analysis indicated that Lig(Tk) was closely related to the ATP-dependent DNA ligase from Methanobacterium thermoautotrophicum DeltaH, a moderate thermophilic archaeon, along with putative DNA ligases from Euryarchaeota and Crenarchaeota. We expressed lig(Tk) in Escherichia coli and purified the recombinant protein. Recombinant Lig(Tk) was monomeric, as is the case for other DNA ligases. The protein displayed DNA ligase activity in the presence of ATP and Mg(2+). The optimum pH of Lig(Tk) was 8.0, the optimum concentration of Mg(2+), which was indispensable for the enzyme activity, was 14 to 18 mM, and the optimum concentration of K(+) was 10 to 30 mM. Lig(Tk) did not display single-stranded DNA ligase activity. At enzyme concentrations of 200 nM, we observed significant DNA ligase activity even at 100 degrees C. Unexpectedly, Lig(Tk) displayed a relatively small, but significant, DNA ligase activity when NAD(+) was added as the cofactor. Treatment of NAD(+) with hexokinase did not affect this activity, excluding the possibility of contaminant ATP in the NAD(+) solution. This unique cofactor specificity was also supported by the observation of adenylation of Lig(Tk) with NAD(+). This is the first biochemical study of a DNA ligase from a hyperthermophilic archaeon.

A DNA ligase from the psychrophile Pseudoalteromonas haloplanktis gives insights into the adaptation of proteins to low temperatures

The cloning, overexpression and characterization of a cold-adapted DNA ligase from the Antarctic sea water bacterium Pseudoalteromonas haloplanktis are described. Protein sequence analysis revealed that the cold-adapted Ph DNA ligase shows a significant level of sequence similarity to other NAD+-dependent DNA ligases and contains several previously described sequence motifs. Also, a decreased level of arginine and proline residues in Ph DNA ligase could be involved in the cold-adaptation strategy. Moreover, 3D modelling of the N-terminal domain of Ph DNA ligase clearly indicates that this domain is destabilized compared with its thermophilic homologue. The recombinant Ph DNA ligase was overexpressed in Escherichia coli and purified to homogeneity. Mass spectroscopy experiments indicated that the purified enzyme is mainly in an adenylated form with a molecular mass of 74 593 Da. Ph DNA ligase shows similar overall catalytic properties to other NAD+-dependent DNA ligases but is a cold-adapted enzyme as its catalytic efficiency (kcat/Km) at low and moderate temperatures is higher than that of its mesophilic counterpart E. coli DNA ligase. A kinetic comparison of three enzymes adapted to different temperatures (P. haloplanktis, E. coli and Thermus scotoductus DNA ligases) indicated that an increased kcat is the most important adaptive parameter for enzymatic activity at low temperatures, whereas a decreased Km for the nicked DNA substrate seems to allow T. scotoductus DNA ligase to work efficiently at high temperatures. Besides being useful for investigation of the adaptation of enzymes to extreme temperatures, P. haloplanktis DNA ligase, which is very efficient at low temperatures, offers a novel tool for biotechnology.

Specific inhibition of the eubacterial DNA ligase by arylamino compounds

All known DNA ligases catalyze the formation of a phosphodiester linkage between adjacent termini in double-stranded DNA via very similar mechanisms. The ligase family can, however, be divided into two classes: eubacterial ligases, which require NAD(+) as a cofactor, and other ligases, from viruses, archaea, and eukaryotes, which use ATP. Drugs that discriminate between DNA ligases from different sources may have antieubacterial activity. We now report that a group of arylamino compounds, including some commonly used antimalarial and anti-inflammatory drugs and a novel series of bisquinoline compounds, are specific inhibitors of eubacterial DNA ligases. Members of this group of inhibitors have different heterocyclic ring systems with a common amino side chain in which the two nitrogens are separated by four carbon atoms. The potency, but not the specificity of action, is influenced by the DNA-binding characteristics of the inhibitor, and the inhibition is noncompetitive with respect to NAD(+). The arylamino compounds appear to target eubacterial DNA ligase in vivo, since a Salmonella Lig(-) strain that has been rescued with the ATP-dependent T4 DNA ligase is less sensitive than the parental Salmonella strain.

Comparison of the D-glutamate-adding enzymes from selected gram-positive and gram-negative bacteria

The biochemical properties of the D-glutamate-adding enzymes (MurD) from Escherichia coli, Haemophilus influenzae, Enterococcus faecalis, and Staphylococcus aureus were investigated to detect any differences in the activity of this enzyme between gram-positive and gram-negative bacteria. The genes (murD) that encode these enzymes were cloned into pMAL-c2 fusion vector and overexpressed as maltose-binding protein-MurD fusion proteins. Each fusion protein was purified to homogeneity by affinity to amylose resin. Proteolytic treatments of the fusion proteins with factor Xa regenerated the individual MurD proteins. It was found that these fusion proteins retain D-glutamate-adding activity and have Km and Vmax values similar to those of the regenerated MurDs, except for the H. influenzae enzyme. Substrate inhibition by UDP-N-acetylmuramyl-L-alanine, the acceptor substrate, was observed at concentrations greater than 15 and 30 microM for E. coli and H. influenzae MurD, respectively. Such substrate inhibition was not observed with the E. faecalis and S. aureus enzymes, up to a substrate concentration of 1 to 2 mM. In addition, the two MurDs of gram-negative origin were shown to require monocations such as NH4+ and/or K+, but not Na+, for optimal activity, while anions such as Cl- and SO4(2-) had no effect on the enzyme activities. The activities of the two MurDs of gram-positive origin, on the other hand, were not affected by any of the ions tested. All four enzymes required Mg2+ for the ligase activity and exhibited optimal activities around pH 8. These differences observed between the gram-positive and gram-negative MurDs indicated that the two gram-negative bacteria may apply a more stringent regulation of cell wall biosynthesis at the early stage of peptidoglycan biosynthesis pathway than do the two gram-positive bacteria. Therefore, the MurD-catalyzed reaction may constitute a fine-tuning step necessary for the gram-negative bacteria to optimally maintain its relatively thin yet essential cell wall structure during all stages of growth.

Biochemical properties of a high fidelity DNA ligase from Thermus species AK16D

NAD+-dependent DNA ligases from thermophilic bacteria Thermus species are highly homologous with amino acid sequence identities ranging from 85 to 98%. Thermus species AK16D ligase, the most divergent of the seven Thermus isolates collected worldwide, was cloned, expressed in Escherichia coli and purified to homogeneity. This Thermus ligase is similar to Thermus thermophilus HB8 ligase with respect to pH, salt, NAD+, divalent cation profiles and steady-state kinetics.However, the former is more discriminative toward T/G mismatches at the 3'-side of the ligation junction, as judged by the ratios of initial ligation rates of matched and mismatched substrates. The two wild-type Thermus ligases and a Tth ligase mutant (K294R) demonstrate 1-2 orders of magnitude higher fidelity than viral T4 DNA ligase. Both Thermus ligases are active with either the metal cofactor Mg2+, Mn2+or Ca2+but not with Co2+, Ni2+, Cu2+or Zn2+. While the nick closure step with Ca2+becomes rate-limiting which results in the accumulation of DNA-adenylate intermediate, Ni2+only supports intermediate formation to a limited extent. Both Thermus ligases exhibit enhanced mismatch ligation when Mn2+is substituted for Mg2+, but the Tsp. AK16D ligase remains more specific toward perfectly matched substrate.

High sequence fidelity in a non-enzymatic DNA autoligation reaction

The success of oligonucleotide ligation assays in probing specific sequences of DNA arises in large part from high enzymatic selectivity against base mismatches at the ligation junction. We describe here a study of the effect of mismatches on a new non-enzymatic, reagent-free method for ligation of oligonucleotides. In this approach, two oligonucleotides bound at adjacent sites on a complementary strand undergo autoligation by displacement of a 5'-end iodide with a 3'-phosphorothioate group. The data show that this ligation proceeds somewhat more slowly than ligation by T4 ligase, but with substantial discrimination against single base mismatches both at either side of the junction and a few nucleotides away within one of the oligonucleotide binding sites. Selectivities of >100-fold against a single mismatch are observed in the latter case. Experiments at varied concentrations and temperatures are carried out both with the autoligation of two adjacent linear oligonucleotides and with intramolecular autoligation to yield circular 'padlock' DNAs. Application of optimized conditions to discrim-ination of an H- ras codon 12 point mutation is demonstrated with a single-stranded short DNA target.

Fluorescence-based oligonucleotide ligation assay for analysis of cystic fibrosis transmembrane conductance regulator gene mutations

Isolation of the gene for cystic fibrosis (CF), the cystic fibrosis transmembrane conductance regulator (CFTR), provided a basis for analyzing its molecular pathology and resulted in the identification of > 400 mutations associated with disease. Except for the delta F508 mutation, no other single mutation accounts for > 5% of CF chromosomes in most populations, and most mutation frequencies are < 1%. A strategy based on multiplex PCR followed by multiplex allele-specific oligonucleotide probe ligation was used to detect 30 mutations, distributed throughout ten exons and seven introns of the CFTR gene, that together account for > 96% of CF mutant chromosomes worldwide. Mutations were detected by competitive oligonucleotide probe ligation to detect normal and/or mutant genotypes in one reaction. Three probes (one common and two allelic probes) were needed for analysis of each mutation. Probes hybridized to target DNA were joined by a thermostable ligase if there were no mismatches at their junctions; temperature cycling resulted in a linear increase in product. Common probes were labeled with fluorochromes, and allelic probes each had different lengths. Ligation products were analyzed electrophoretically on a fluorescent DNA sequencer. The results show that combined PCR and probe ligation amplification rapidly and reliably screen for CF homozygotes and carriers.

Evidence that a plasmid from a hyperthermophilic archaebacterium is relaxed at physiological temperatures

A plasmid of 3.45 kb (pGT5) was recently discovered in a strain of hyperthermophilic archaebacterium which was isolated from samples collected in a deep-sea hydrothermal vent. This strain (GE5) grows within a temperature range of 68 to 101.5 degrees C, and we show here that it contains a strong ATP-dependent reverse gyrase activity (positive DNA supercoiling). By comparison with eubacterial plasmids of known superhelical densities, we estimated the superhelical density of the archaebacterial plasmid pGT5 to be -0.026 at 25 degrees C. The equation which relates the change of the rotation angle of the DNA double helix with temperature was validated at 95 degrees C, the optimal growth temperature of the GE5 strain. Considering these new data, the superhelical density of plasmid pGT5 was calculated to be -0.006 at the physiological temperature of 95 degrees C, which is close to the relaxed state. This finding shows that the DNA topology of a plasmid isolated from a hyperthermophilic archaebacterium containing reverse gyrase activity is strikingly different from that of typical eubacterial plasmids.

Cloning, overexpression and nucleotide sequence of a thermostable DNA ligase-encoding gene

Thermostable DNA ligase has been harnessed for the detection of single-base genetic diseases using the ligase chain reaction [Barany, Proc. Natl. Acad. Sci. USA 88 (1991) 189-193]. The Thermus thermophilus (Tth) DNA ligase-encoding gene (ligT) was cloned in Escherichia coli by genetic complementation of a ligts 7 defect in an E. coli host. Nucleotide sequence analysis of the gene revealed a single chain of 676 amino acid residues with 47% identity to the E. coli ligase. Under phoA promoter control, Tth ligase was overproduced to greater than 10% of E. coli cellular proteins. Adenylated and deadenylated forms of the purified enzyme were distinguished by apparent molecular weights of 81 kDa and 78 kDa, respectively, after separation via sodium dodecyl sulfate-polyacrylamide-gel electrophoresis.

Reverse gyrase, a hallmark of the hyperthermophilic archaebacteria

Investigation of the presence of a reverse gyrase-like activity in archaebacteria revealed wide distribution of this activity in hyperthermophilic species, including methanogens and sulfur-dependent organisms. In contrast, no reverse gyrase activity was detected in mesophilic and moderately thermophilic organisms, which exhibited only an ATP-independent activity of DNA relaxation. These results suggest that the presence of reverse gyrase in archaebacteria is tightly linked to the high growth temperatures of these organisms. With respect to antigenic properties, the enzyme appeared similar among members of the genus Sulfolobus. In contrast, no close antigenic relatedness was found between the reverse gyrase of members of the order Sulfolobales and that of the other hyperthermophilic organisms.

Two distinct DNA ligases from Drosophila melanogaster embryos

Embryos of Drosophila melanogaster contain two distinct DNA ligases (DNA ligase I and II). DNA ligase I was eluted at 0.2 M KCl and DNA ligase II at 0.6 M KCl on phosphocellulose column chromatography. The former was rich in early developing embryos and its activity decreased during embryonic development. The latter was found constantly throughout the developing stages of embryos. DNA ligase I existed in a cytoplasmic fraction and DNA ligase II is concentrated in nuclei. Both enzymes ligate 5'-phosphoryl and 3'-hydroxyl groups in oligo(dT) in the presence of poly(dA). DNA ligase II is also able to join oligo(dT)(poly(rA). Both enzymes require ATP and Mg2+ for activity. The Km for ATP is 2.7 X 10(-6) M for DNA ligase I, and 3.0 X 10(-5) M for DNA ligase II. DNA ligase I requires dithiothreitol and polyvinyl alcohol, but DNA ligase II does not. Both enzymes are inhibited in the presence of N-ethylmaleimide. DNA ligase I is active at a low salt concentration (0-30 mM KCl), but DNA ligase II is active at high salt concentrations (50-100 mM). DNA ligase I is more labile than DNA ligase II. The molecular masses of DNA ligase-AMP adducts were determined as 86 and 75 kDa for DNA ligase I, and as 70 (major protein) and 90 kDa (minor protein) for DNA ligase II under denaturing conditions. A sedimentation coefficient of 4.2 S was observed for DNA ligase II. Consequently, Drosophila DNA ligase I and II are quite similar to mammalian DNA ligase I and II. Drosophila DNA ligase I and a DNA ligase by B.A. Rabin et al. [(1986) J. Biol. Chem. 261, 10637-10645] seem to be the same enzyme.