Three-dimensional localization of the NH2- and carboxyl-terminal domain of ribosomal protein S1 on the surface of the 30 S subunit from Escherichia coli

Structural basis for the interaction of protein S1 with the Escherichia coli ribosome

In Gram-negative bacteria, the multi-domain protein S1 is essential for translation initiation, as it recruits the mRNA and facilitates its localization in the decoding centre. In sharp contrast to its functional importance, S1 is still lacking from the high-resolution structures available for Escherichia coli and Thermus thermophilus ribosomes and thus the molecular mechanism governing the S1-ribosome interaction has still remained elusive. Here, we present the structure of the N-terminal S1 domain D1 when bound to the ribosome at atomic resolution by using a combination of NMR, X-ray crystallography and cryo-electron microscopy. Together with biochemical assays, the structure reveals that S1 is anchored to the ribosome primarily via a stabilizing π-stacking interaction within the short but conserved N-terminal segment that is flexibly connected to domain D1. This interaction is further stabilized by salt bridges involving the zinc binding pocket of protein S2. Overall, this work provides one hitherto enigmatic piece in the 'ribosome puzzle', namely the detailed molecular insight into the topology of the S1-ribosome interface. Moreover, our data suggest novel mechanisms that have the potential to modulate protein synthesis in response to environmental cues by changing the affinity of S1 for the ribosome.

Molecular insights into replication initiation by Qβ replicase using ribosomal protein S1

Ribosomal protein S1, consisting of six contiguous OB-folds, is the largest ribosomal protein and is essential for translation initiation in Escherichia coli. S1 is also one of the three essential host-derived subunits of Qβ replicase, together with EF-Tu and EF-Ts, for Qβ RNA replication in E. coli. We analyzed the crystal structure of Qβ replicase, consisting of the virus-encoded RNA-dependent RNA polymerase (β-subunit), EF-Tu, EF-Ts and the N-terminal half of S1, which is capable of initiating Qβ RNA replication. Structural and biochemical studies revealed that the two N-terminal OB-folds of S1 anchor S1 onto the β-subunit, and the third OB-fold is mobile and protrudes beyond the surface of the β-subunit. The third OB-fold mainly interacts with a specific RNA fragment derived from the internal region of Qβ RNA, and its RNA-binding ability is required for replication initiation of Qβ RNA. Thus, the third mobile OB-fold of S1, which is spatially anchored near the surface of the β-subunit, primarily recruits the Qβ RNA toward the β-subunit, leading to the specific and efficient replication initiation of Qβ RNA, and S1 functions as a replication initiation factor, beyond its established function in protein synthesis.

Escherichia coli ribosomal protein S1 unfolds structured mRNAs onto the ribosome for active translation initiation

Regulation of translation initiation is well appropriate to adapt cell growth in response to stress and environmental changes. Many bacterial mRNAs adopt structures in their 5' untranslated regions that modulate the accessibility of the 30S ribosomal subunit. Structured mRNAs interact with the 30S in a two-step process where the docking of a folded mRNA precedes an accommodation step. Here, we used a combination of experimental approaches in vitro (kinetic of mRNA unfolding and binding experiments to analyze mRNA-protein or mRNA-ribosome complexes, toeprinting assays to follow the formation of ribosomal initiation complexes) and in vivo (genetic) to monitor the action of ribosomal protein S1 on the initiation of structured and regulated mRNAs. We demonstrate that r-protein S1 endows the 30S with an RNA chaperone activity that is essential for the docking and the unfolding of structured mRNAs, and for the correct positioning of the initiation codon inside the decoding channel. The first three OB-fold domains of S1 retain all its activities (mRNA and 30S binding, RNA melting activity) on the 30S subunit. S1 is not required for all mRNAs and acts differently on mRNAs according to the signals present at their 5' ends. This work shows that S1 confers to the ribosome dynamic properties to initiate translation of a large set of mRNAs with diverse structural features.

Direct interaction of the N-terminal domain of ribosomal protein S1 with protein S2 in Escherichia coli

Despite of the high resolution structure available for the E. coli ribosome, hitherto the structure and localization of the essential ribosomal protein S1 on the 30 S subunit still remains to be elucidated. It was previously reported that protein S1 binds to the ribosome via protein-protein interaction at the two N-terminal domains. Moreover, protein S2 was shown to be required for binding of protein S1 to the ribosome. Here, we present evidence that the N-terminal domain of S1 (amino acids 1-106; S1(106)) is necessary and sufficient for the interaction with protein S2 as well as for ribosome binding. We show that over production of protein S1(106) affects E. coli growth by displacing native protein S1 from its binding pocket on the ribosome. In addition, our data reveal that the coiled-coil domain of protein S2 (S2α(2)) is sufficient to allow protein S1 to bind to the ribosome. Taken together, these data uncover the crucial elements required for the S1/S2 interaction, which is pivotal for translation initiation on canonical mRNAs in gram-negative bacteria. The results are discussed in terms of a model wherein the S1/S2 interaction surface could represent a possible target to modulate the selectivity of the translational machinery and thereby alter the translational program under distinct conditions.

Ribosomal Proteins in the Spotlight

The assignment of specific ribosomal functions to individual ribosomal proteins is difficult due to the enormous cooperativity of the ribosome; however, important roles for distinct ribosomal proteins are becoming evident. Although rRNA has a major role in certain aspects of ribosomal function, such as decoding and peptidyl-transferase activity, ribosomal proteins are nevertheless essential for the assembly and optimal functioning of the ribosome. This is particularly true in the context of interactions at the entrance pore for mRNA, for the translation-factor binding site and at the tunnel exit, where both chaperones and complexes associated with protein transport through membranes bind.

Ribosomal protein S1 induces a conformational change of the 30S ribosomal subunit

A comparative study of the 30S ribosomal subunit in the complex with protein S1 and the subunit depleted of this protein has been carried out by the hot tritium bombardment method. Differences in exposure of some ribosomal proteins within the 30S subunit depleted of S1 and within the 30S-S1 complex were found. It was concluded that protein S1 binds in the region of the neck of the 30S ribosomal subunit inducing a conformational change of its structure.

Ribosomal protein S1 from Thermus thermophilus: its detection, identification and overproduction

Ribosomal protein S1 has been identified in Thermus thermophilus ribosomes. The gene of ribosomal protein S1 from Thermus thermophilus has been cloned and overexpressed in Escherichia coli. A procedure for purification of the protein has been developed.

The production of anti-hexapeptide antibodies which recognize the S7, L6 and L13 ribosomal proteins of Escherichia coli

Here we report the synthesis of the N-terminal hexapeptide H-Pro-Arg-Arg-Arg-Val-Ile-OH of the E. coli ribosomal protein S7. the C-terminal hexapeptide H-Lys-Glu-Ala-Lys-Lys-Lys-OH of L6 and the C-terminal hexapeptide H-Pro-Gln-Val-Leu-Asp-Ile-OH of L13. All peptides were prepared by SPPS following the Fmoc-strategy, using DIC/HOBt and/or HBTU as coupling reagents and 2-chlorotrityl chloride resin as the solid support. The carrier linked synthetic peptides were injected into rabbits and elicited an anti-peptide response. These anti-hexapeptide antibodies were found to recognize the corresponding peptides and proteins.

Visualization of protein S1 within the 30S ribosomal subunit and its interaction with messenger RNA

S1 is the largest ribosomal protein, present in the small subunit of the bacterial ribosome. It has a pivotal role in stabilizing the mRNA on the ribosome. Thus far, S1 has eluded structural determination. We have identified the S1 protein mass in the cryo-electron microscopic map of the Escherichia coli ribosome by comparing the map with a recent x-ray crystallographic structure of the 30S subunit, which lacks S1. According to our finding, S1 is located at the junction of head, platform, and main body of the 30S subunit, thus explaining all existing biochemical and crosslinking data. Protein S1 as identified in our map has a complex, elongated shape with two holes in its central portion. The N-terminal domain, forming one of the extensions, penetrates into the head of the 30S subunit. Evidence for direct interaction of S1 with 11 nucleotides of the mRNA, immediately upstream of the Shine-Dalgarno sequence, explains the protein's role in the recognition of the 5' region of mRNA.

Mapping proteins of the 50S subunit from Escherichia coli ribosomes

Mapping of protein positions in the ribosomal subunits was first achieved for the 30S subunit by means of neutron scattering about 15 years ago. Since the 50S subunit is almost twice as large as the 30S subunit and consists of more proteins, it was difficult to apply classical contrast variation techniques for the localisation of the proteins. Polarisation dependent neutron scattering (spin-contrast variation) helped to overcome this restriction. Here a map of 14 proteins within the 50S subunit from Escherichia coli ribosomes is presented including the proteins L17 and L20 that are not present in archeal ribosomes. The results are compared with the recent crystallographic map of the 50S subunit from the archea Haloarcula marismortui.

A method for differentiating proteins from nucleic acids in intermediate-resolution density maps: cryo-electron microscopy defines the quaternary structure of the Escherichia coli 70S ribosome

BACKGROUND

This study addresses the general problem of dividing a density map of a nucleic-acid-protein complex obtained by cryo-electron microscopy (cryo-EM) or X-ray crystallography into its two components. When the resolution of the density map approaches approximately 3 A it is generally possible to interpret its shape (i. e., the envelope obtained for a standard choice of threshold) in terms of molecular structure, and assign protein and nucleic acid elements on the basis of their known sequences. The interpretation of low-resolution maps in terms of proteins and nucleic acid elements of known structure is of increasing importance in the study of large macromolecular complexes, but such analyses are difficult.

RESULTS

Here we show that it is possible to separate proteins from nucleic acids in a cryo-EM density map, even at 11.5 A resolution. This is achieved by analysing the (continuous-valued) densities using the difference in scattering density between protein and nucleic acids, the contiguity constraints that the image of any nucleic acid molecule must obey, and the knowledge of the molecular volumes of all proteins.

CONCLUSIONS

The new method, when applied to an 11.5 A cryo-EM map of the Escherichia coli 70S ribosome, reproduces boundary assignments between rRNA and proteins made from higher-resolution X-ray maps of the ribosomal subunits with a high degree of accuracy. Plausible predictions for the positions of as yet unassigned proteins and RNA components are also possible. One of the conclusions derived from this separation is that 23S rRNA is solely responsible for the catalysis of peptide bond formation. Application of the separation method to any nucleoprotein complex appears feasible.

Arrangement of tRNAs in pre- and posttranslocational ribosomes revealed by electron cryomicroscopy

The three-dimensional structure of the translating 70S E. coli ribosome is presented in its two main conformations: the pretranslocational and the posttranslocational states. Using electron cryomicroscopy and angular reconstitution, structures at 20 A resolution were obtained, which, when compared with our earlier reconstruction of "empty" ribosomes, showed densities corresponding to tRNA molecules--at the P and E sites for posttranslocational ribosomes and at the A and P sites for pretranslocational ribosomes. The P-site tRNA lies directly above the bridge connecting the two ribosomal subunits, with the A-site tRNA fitted snugly against it at an angle of approximately 50 degrees, toward the L7/L12 side of the ribosome. The E-site tRNA appears to lie between the side lobe of the 30S subunit and the L1 protuberance.

Ternary complex formation on leaderless phage mRNA

The phage Lambda PRM promoter-derived cI mRNA and phage P2 gene V mRNA are transcribed beginning with the A residue of the AUG start codon. Using lacZ fusion analysis we have assessed the effects of alterations in the immediate downstream coding region on the translational efficiency of these mRNAs. Mutations, including deletions of the putative downstream box of either cI or gene V mRNAs, showed no significant reduction in expression of the different lacZ fusions. Primer extension inhibition analysis suggests a role of ribosomal protein S1 in cI mRNA recognition.

Determination of peptide regions exposed at the surface of the bacterial ribosome with antibodies against synthetic peptides

We synthesized six peptides corresponding to regions that are predicted to be surface-exposed of the following ribosomal proteins: protein L2, positions (D263-K272); protein L5, positions (I136-G150); protein L25, positions (Q75-D90); protein S3, positions (Q222-K232) derived from Escherichia coli; and protein L2, positions (K257-K275), and protein S3, positions (R130-T150) from Bacillus stearothermophilus. These peptides were employed to raise ribosomal protein-cross-reactive antibodies. The anti-peptide antisera reacted specifically with their parent proteins, as demonstrated by immunoblotting experiments. In a competition assay proteins L2 from E. coli and B. stearothermophilus as well as proteins L5 and L25 from E. coli were found to be accessible to the respective anti-peptide antibodies in the 50S subunits, but not in 70S ribosomes, proving their location at the 50S interface which is covered by the 30S subunit in the 70S complex. Two of the anti-peptide antisera directed against sequences deduced from protein S3 of E. coli and B. stearothermophilus reacted with 30S subunits as well as with 70S ribosomes, demonstrating their location at the backside, which is exposed to solvent. Thus, by the strategy applied specific short peptide stretches were located at the surface of the ribosome.

Prokaryotic translation: the interactive pathway leading to initiation

Finding answers to the many open questions concerning the mechanism and control of prokaryotic translation remains one of the central challenges of molecular biology. In fact, recent experimental data even force us to reconsider aspects that were previously thought to be established fact. Here, we attempt a synthesis of new and not-so-new information, which leads to a revised and testable working hypothesis for translational initiation.

Immunoelectron microscopic localization of ribosomal proteins BS8, BS9, BS20, BL3 and BL21 on the surface of 30S and 50S subunits from Bacillus stearothermophilus

The locations of ribosomal proteins BS8, BS9 and BS20 on the 30S subunit of Bacillus stearothermophilus ribosomes, and of BL3 and BL21 on the 50S subunit, were determined by immunoelectron microscopy. BL3 was found to lie half-way down the body of the 50S subunit on the interface side, below the L7/L12 stalk, in agreement with the placement of the corresponding protein in Escherichia coli by neutron-scattering; BL21 was located at a similar position on the solvent side of the subunit, as predicted by cross-linking experiments with E. coli ribosomes. Similarly, BS8 was found in the upper region of the body of the 30S subunit on the solvent side, and BS9 on the top of the head of the subunit, also on the solvent side, both positions being in good agreement with neutron-scattering data and other immunoelectron microscopy results. In contrast, BS20 was found to lie at the extreme base of the body of the 30S subunit; this placement is not compatible with the location of E. coli S20 by neutron-scattering but fits very plausibly with other biochemical data, such as sites of RNA-protein footprinting on 16S RNA, relating to the location of S20 in E. coli.

Ribosome-mRNA contact sites at different stages of translation initiation as revealed by cross-linking of model mRNAs

Two model mRNAs, one with and one without the Shine-Dalgarno (SD) sequence, were bound to Escherichia coli 30S ribosomal subunits in the presence and absence of initiation factors and initiator tRNA and then cross-linked by diepoxybutane. The distribution of the cross-linked mRNA among rRNA and ribosomal proteins (r-proteins) and the extent to which individual r-proteins react was found to be affected by the presence or absence of the SD sequence and by the initiation factors and initiator tRNA. The results are consistent with the hypothesis that the position of the 30S-bound mRNA is shifted under the influence of the initiation factors and fMet-tRNA from a stand-by position towards a second site where the decoding of the initiation triplet by the initiator tRNA occurs.

Localization of surface peptide from ribosomal protein L7 on 80 S ribosome by biotinylation

A surface topography of ribosomal peptides on ribosome particles was conducted by using N',Hydroxysuccinimido-biotin (NHS-biotin) modification. All rat ribosomal proteins, except proteins L3 and L8, are biotinylated when the ribosome particle is the substrate. A surface peptide from protein L7 was determined from biotinylated ribosomes by high performance liquid chromatography and cyanogen bromide peptide mapping. It was found that only the tandem repeats of the NH2-terminal segment of protein L7 are accessible to biotinylation. It is concluded that the NH2-terminal-end of protein L7 should be exposed on the surface of ribosomal particles.