Maximal limits of the Escherichia coli replication factor Y effector site sequences in pBR322 DNA

Generic plasmid DNA production platform incorporating low metabolic burden seed-stock and fed-batch fermentation processes

DNA vaccines have tremendous potential for rapid deployment in pandemic applications, wherein a new antigen is "plugged" into a validated vector, and rapidly produced in a validated, fermentation-purification process. For this application, it is essential that the vector and fermentation process function with a variety of different antigen genes. However, many antigen genes are unpredictably "toxic" or otherwise low yielding in standard fermentation processes. We report cell bank and fermentation process unit operation innovations that reduce plasmid-mediated metabolic burden, enabling successful production of previously known toxic influenza hemagglutinin antigen genes. These processes, combined with vector backbone modifications, doubled fermentation productivity compared to existing high copy vectors, such as pVAX1 and gWiz, resulting in high plasmid yields (up to 2,220 mg/L, 5% of total dry cell weight) even with previously identified toxic or poor producing inserts.

The Escherichia coli PriA helicase has two nucleotide-binding sites differing dramatically in their affinities for nucleotide cofactors. 1. Intrinsic affinities, cooperativities, and base specificity of nucleotide cofactor binding

Interactions of the Escherichia coli PriA helicase with nucleotide cofactors have been studied using the fluorescence titration and analytical ultracentrifugation techniques. Binding of unmodified cofactors was characterized by the fluorescence competition titration method. The obtained data establish that at saturation the PriA helicase binds two nucleotide molecules per protein monomer. This result corroborates with the primary structure of the protein, which contains sequence motifs implicated as putative nucleotide-binding sites. The intrinsic affinities of the binding sites differ by 2-4 orders of magnitude. Thus, the PriA helicase has a strong and a weak nucleotide-binding site. The binding sites differ dramatically in their properties. The strong site is highly specific for adenosine cofactors, while the weak site shows very modest base specificity. The affinities of the strong and weak binding sites for ATP are lower than the affinities for ADP, although both sites have similar affinity for the inorganic phosphate group. Unlike the weak site, the affinity of the strong site profoundly depends on the structure of the phosphate group of the ATP cofactor. Binding of unmodified nucleotides indicates the presence of positive cooperative interactions between bound cofactors (i.e., the existence of communication between the two sites). Magnesium cations are specifically involved in controlling the cofactor affinity for the strong site, while the affinity of the weak site is predominantly determined by interactions between the phosphate group and ribose regions of the cofactor and the protein matrix. The significance of these results for the activities of the PriA helicase is discussed.

Transcription regulatory elements are punctuation marks for DNA replication

Collisions between DNA replication and transcription significantly affect genome organization, regulation, and stability. Previous studies have described collisions between replication forks and elongating RNA polymerases. Although replication collisions with the transcription-initiation or -termination complexes are potentially even more important because most genes are not actively transcribed during DNA replication, their existence and mechanisms remained unproven. To address this matter, we have designed a bacterial promoter that binds RNA polymerase and maintains it in the initiating mode by precluding the transition into the elongation mode. By using electrophoretic analysis of replication intermediates, we have found that this steadfast transcription-initiation complex inhibits replication fork progression in an orientation-dependent manner during head-on collisions. Transcription terminators also appeared to attenuate DNA replication, but in the opposite, codirectional orientation. Thus, transcription regulatory signals may serve as "punctuation marks" for DNA replication in vivo.

Mechanisms of transcription-replication collisions in bacteria

While collisions between replication and transcription in bacteria are deemed inevitable, the fine details of the interplay between the two machineries are poorly understood. In this study, we evaluate the effects of transcription on the replication fork progression in vivo, by using electrophoresis analysis of replication intermediates. Studying Escherichia coli plasmids, which carry constitutive or inducible promoters in different orientations relative to the replication origin, we show that the mutual orientation of the two processes determines their mode of interaction. Replication elongation appears not to be affected by transcription proceeding in the codirectional orientation. Head-on transcription, by contrast, leads to severe inhibition of the replication fork progression. Furthermore, we evaluate the mechanism of this inhibition by limiting the area of direct contact between the two machineries. We observe that replication pausing zones coincide exactly with transcribed DNA segments. We conclude, therefore, that the replication fork is most likely attenuated upon direct physical interaction with the head-on transcription machinery.

Multistep sequential mechanism of Escherichia coli helicase PriA protein-ssDNA interactions. Kinetics and energetics of the active ssDNA-searching site of the enzyme

Kinetics of the Escherichia coli PriA helicase interactions with the ssDNA has been studied, using the fluorescence stopped-flow technique. Experiments have been performed with a series of fluorescent etheno derivatives of ssDNA adenosine oligomers, differing in the number of nucleotide residues. The PriA helicase binds the ssDNA in the sequential process defined by [reaction: see text]. In the first step, the enzyme associates fast with the ssDNA without inducing conformational changes in the DNA. The dependence of the partial equilibrium constant, characterizing the first step, upon the length of the ssDNA strictly reflects the statistical relationship between the size of the DNA-binding site and the number of potential binding sites on the ssDNA. Only the DNA-binding site that encompasses 6.3 +/- 1 residues is directly involved in interactions. The site is located on a structural domain allowing the enzyme to efficiently search and recognize small patches of the ssDNA. Intramolecular steps are independent of the ssDNA length and accompanied by changes in the DNA structure. Salt and glycerol effects on the studied kinetics indicate a very different nature of the intermediates. While the bimolecular step is characterized by net ion release and water uptake, net ion uptake and water release accompany intramolecular transitions. Specific ion binding stabilizes the helicase-ssDNA complex in (P)(2) and (P)(3) intermediates. However, magnesium and AMP-PNP do not affect the mechanism of enzyme-ssDNA interactions. The sequential character of the mechanism indicates that the enzyme does not exist in a preequilibrium conformational transition prior to the DNA binding.

Escherichia coli replicative helicase PriA protein-single-stranded DNA complex. Stoichiometries, free energy of binding, and cooperativities

Analyses of interactions of the Escherichia coli replicative helicase, PriA protein, with a single-stranded (ss) DNA have been performed, using the quantitative fluorescence titration technique. The stoichiometry of the PriA helicase.ssDNA complex has been examined in binding experiments with a series of ssDNA oligomers. The total site-size of the PriA.ssDNA complex, i.e. the maximum number of nucleotide residues occluded by the PriA helicase in the complex, is 20 +/- 3 residues per protein monomer. However, the protein can efficiently form a complex with a minimum of 8 nucleotides. Thus, the enzyme has a strong ssDNA-binding site that engages in direct interactions with a significantly smaller number of nucleotides than the total site-size. The ssDNA-binding site is located in the center of the enzyme molecule, with the protein matrix protruding over a distance of approximately 6 nucleotides on both sides of the binding site. The analysis of the binding of two PriA molecules to long oligomers was performed using statistical thermodynamic models that take into account the overlap of potential binding sites, cooperative interactions, and the protein.ssDNA complexes with different stoichiometries. The intrinsic affinity depends little upon the length of the ssDNA. Moreover, the binding is accompanied by weak cooperative interactions.

Interactions of Escherichia coli replicative helicase PriA protein with single-stranded DNA

Quantitative analyses of the interactions of the Escherichia coli replicative helicase PriA protein with a single-stranded DNA have been performed, using the thermodynamically rigorous fluorescence titration technique. The analysis of the PriA helicase interactions with nonfluorescent, unmodified nucleic acids has been performed, using the macromolecular competition titration (MCT) method. Thermodynamic studies of the PriA helicase binding to ssDNA oligomers, as well as competition studies, show that independently of the type of nucleic acid base, as well as the salt concentration, the type of salt in solution, and nucleotide cofactors, the PriA helicase binds the ssDNA as a monomer. The enzyme binds the ssDNA with significant affinity in the absence of any nucleotide cofactors. Moreover, the presence of AMP-PNP diminishes the intrinsic affinity of the PriA protein for the ssDNA by a factor approximately 4, while ADP has no detectable effect. Analyses of the PriA interactions with different ssDNA oligomers, over a large range of nucleic acid concentrations, indicates that the enzyme has a single, strong ssDNA-binding site. The intrinsic affinities are salt-dependent. The formation of the helicase-ssDNA complexes is accompanied by a net release of 3-4 ions. The experiments have been performed with ssDNA oligomers encompassing the total site size of the helicase-ssDNA complex and with oligomers long enough to encompass only the ssDNA-binding site of the enzyme. The obtained results indicate that salt dependence of the intrinsic affinity results predominantly, if not exclusively, from the interactions of the ssDNA-binding site of the helicase with the nucleic acid. There is an anion effect on the studied interactions, which suggests that released ions originate from both the protein and the nucleic acid. Contrary to the intrinsic affinities, cooperative interactions between bound PriA molecules are accompanied by a net uptake of approximately 3 ions. The PriA protein shows preferential intrinsic affinity for pyrimidine ssDNA oligomers. In our standard conditions (pH 7.0, 10 degrees C, 100 mM NaCl), the intrinsic binding constant for the pyrimidine oligomers is approximately 1 order of magnitude higher than the intrinsic binding constant for the purine oligomers. The significance of these results for the mechanism of action of the PriA helicase is discussed.

PriA: at the crossroads of DNA replication and recombination

PriA is a single-stranded DNA-dependent ATPase, DNA translocase, and DNA helicase that was discovered originally because of its requirement in vitro for the conversion of bacteriophage phi X174 viral DNA to the duplex replicative form. Studies demonstrated that PriA catalyzes the assembly of a primosome, a multiprotein complex that primes DNA synthesis, on phi X174 DNA. The primosome was shown to be capable of providing both the DNA unwinding function and the Okazaki fragment priming function required for replication fork progression. However, whereas seven proteins, PriA, PriB, PriC, DnaT, DnaB, DnaC, and DnaG, were required for primosome assembly on phi X174 DNA, only DnaB, DnaC, and DnaG were required for replication from oriC, suggesting that the other proteins were not involved in chromosomal replication. Strains carrying priA null mutations, however, were constitutively induced for the SOS response, and were defective in homologous recombination, repair of UV-damaged DNA, and double-strand breaks, and both induced and constitutive stable DNA replication. The basis for this phenotype can now be explained by the ability of PriA to load replication forks at a D loop, an intermediate that forms during homologous recombination, double-strand break-repair, and stable DNA replication. Thus, a long-theorized connection between recombination and replication is demonstrated.

Initiation of bidirectional replication at the chromosomal origin is directed by the interaction between helicase and primase

Several protein-protein interactions have been shown to be critical for proper replication fork function in Escherichia coli. These include interactions between the polymerase and the helicase, the helicase and the primase, and the primase and the polymerase. We have studied the influence of these interactions on proper initiation at oriC by using mutant primases defective in their interaction with the helicase and DNA polymerase III holoenzyme lacking the tau subunit so that it will not interact with the helicase. We show here that accurate initiation of bidirectional DNA replication from oriC is dependent on proper placement of the primers for leading strand synthesis and is thus governed primarily by the interaction between the helicase and primase.

Two modes of PriA binding to DNA

The role of PriA, required for the assembly of the phiX174-type primosome on DNA, in cellular DNA replication has been unclear since its discovery. Recent evidence, based on the phenotypes of strains carrying priA null mutations, has led to proposals that the primosome assembly activity of PriA was required to load replication forks at intermediates such as D loops during homologous recombination. McGlynn et al. (McGlynn, P., Al-Deib, A. A., Liu, J., Marians, K. J., and Lloyd, R. G. (1997) J. Mol. Biol. 270, 212-221) demonstrated that PriA could, in fact, bind D loops. We show here that there are two modes of stable binding of PriA to DNA. One mode, in which the enzyme binds 3'-single-stranded extensions from duplex DNAs, presumably reflects the 3' --> 5' DNA helicase activity of PriA. The D loop DNA binding activity of PriA can be accounted for by the second mode, where the enzyme binds bent DNA at three strand junctions.

Role of the core DNA polymerase III subunits at the replication fork. Alpha is the only subunit required for processive replication

The DNA polymerase III holoenzyme is composed of 10 subunits. The core of the polymerase contains the catalytic polymerase subunit, alpha, the proofreading 3'-->5' exonuclease, epsilon, and a subunit of unknown function, theta. The availability of the holoenzyme subunits in purified form has allowed us to investigate their roles at the replication fork. We show here that of the three subunits in the core polymerase, only alpha is required to form processive replication forks that move at high rates and that exhibit coupled leading- and lagging-strand synthesis in vitro. Taken together with previous data this suggests that the primary determinant of replication fork processivity is the interaction between another holoenzyme subunit, tau, and the replication fork helicase, DnaB.

Two distinct modes of strand unlinking during theta-type DNA replication

DNA gyrase and topoisomerase IV (Topo IV) are type II bacterial DNA topoisomerases that show a high degree of similarity to each other yet appear to have different functions during DNA replication. We show here that the torsional stress generated during theta-type DNA replication in vitro can take the form of either positive supercoils ahead of the replication fork or catenane-like right-handed windings (precatenanes) of the two partially replicated duplexes behind the fork. Gyrase prefers to act on the former, whereas Topo IV prefers the latter. Removal of either form of positive winding can support nascent chain elongation, but only precatenane removal can support the final stages of DNA replication: processing of the late intermediate and daughter chromosome decatenation.

The ordered assembly of the phiX174-type primosome. I. Isolation and identification of intermediate protein-DNA complexes

The phiX-type primosome was discovered during the resolution and reconstitution in vitro of the complementary strand DNA replication step of the phiX174 viral life cycle. This multienzyme bidirectional helicase-primase complex can provide the DNA unwinding and Okazaki fragment-priming functions at the replication fork and has been implicated in cellular DNA replication, repair, and recombination. We have used gel mobility shift assays and enhanced chemiluminescence Western analysis to isolate and identify the pathway of primosome assembly at a primosome assembly site (PAS) on a 300-nucleotide-long single-stranded DNA fragment. The first three steps do not require ATP and are as follows: (i) PriA recognition and binding to the PAS, (ii) stabilization of the PriA-PAS complex by the addition of PriB, and (iii) formation of a PriA-PriB-DnaT-PAS complex. Subsequent formation of the preprimosome involves the ATP-dependent transfer of DnaB from a DnaB-DnaC complex to the PriA-PriB-DnaT-PAS complex. The final preprimosomal complex contains PriA, PriB, DnaT, and DnaB but not DnaC. A transient interaction between the preprimosome and DnaG generates the five-protein primosome. As described in an accompanying article (Ng, J. Y., and Marians, K. J. (1996) J. Biol. Chem. 271, 15649-15655), when assembled on intact phiX174 phage DNA, the primosome also contains PriC.

The ordered assembly of the phiX174-type primosome. II. Preservation of primosome composition from assembly through replication

Gel filtration chromatography was used to isolate both preprimosomal and primosomal complexes formed on single-stranded DNA-binding protein-coated phiX174 DNA by the combination of PriA, PriB, PriC, DnaT, DnaB, DnaC, and DnaG. The presence and relative amounts of primosomal proteins in these complexes were determined by Western blotting. Protein-DNA complexes isolated (i) after assembly in the presence of 10 microM ATP, (ii) after preprimosome movement in the presence of 1 mM ATP, (iii) after priming in the presence of the four ribonucleoside triphosphates, or (iv) after complementary strand DNA replication in the presence of the DNA polymerase III holoenzyme all had the same protein composition; preprimosomes contained PriA, PriB, PriC, DnaT, and DnaB, whereas primosomes included DnaG. The stable association of DnaG with the protein-DNA complex could be attributed partially to its ability to remain bound to the primers synthesized. In the absence of PriC, the efficiencies of priming and replication were reduced by one-third and one-half, respectively, even though PriC was not required for the formation of stable protein-DNA complexes on a 304-nucleotide-long single strand of DNA containing a primosome assembly site (Ng, J. Y., and Marians, K. J. (1996) J. Biol. Chem. 271, 15642-15648). We hypothesize that maintenance of the primosome on the replicated DNA may provide a mechanism to allow primosomes to participate in the resolution of recombination intermediates and intermediates formed during double strand break repair by permitting the re-establishment of a replication fork.

The interaction of Escherichia coli topoisomerase IV with DNA

The two type II topoisomerases in Escherichia coli, DNA gyrase and topoisomerase (Topo) IV, share considerable amino acid sequence similarity, yet they have distinctive topoisomerization activities. Only DNA gyrase can supercoil relaxed DNA, whereas during oriC DNA replication in vitro, only Topo IV can support the final stages of replication, processing of the late intermediate and decatenation of the daughter molecules. In order to develop an understanding for the basis of the differential activities of these two enzymes, we have initiated a characterization of Topo IV binding to DNA. We find that unlike gyrase, Topo IV neither constrains DNA in a positive supercoil when it binds nor protects a 150-base pair region of DNA from digestion with micro-coccal nuclease. Consistent with this, DNase I footprinting experiments showed that Topo IV protected a 34-base pair region roughly centered about the topoisomerase-induced cleavage site. In addition, Topo IV preferentially bound supercoiled rather than relaxed DNA. Thus, the DNA binding characteristics of Topo IV are more akin to those of the type II eukaryotic enzymes rather than those of its prokaryotic partner.

Characterization of a replicon of the moderately promiscuous plasmid, pGSH5000, with features of both the mini-replicon of pCU1 and the ori-2 of F

The dominant, polA1-independent replicon of pGSH500, rep beta (1.8 kb), consists of a cis-acting oriV region of 245 bp; a repB gene that is essential for autonomous replication and 18, 30 to 36 bp iterons which constitute the inc/cop region. The molecular organization of rep beta resembles that of mini-pCU1 (IncN). Furthermore, there is a 58% identity between the Rep proteins of these replicons. RepB also shows a 31% identity with RepE of mini-F. In addition, an 80% identity over 200 bp was identified between the cis-acting beta oriV region and the equivalent region of ori-2 (mini-F). Replicons with deletions of repB could be complemented by Rep (pCU1) and RepE (mini-F) in trans, supporting the hypothesis that rep beta is a natural hybrid between a pCU1-like and F-like replicon.

Inactivation of the Escherichia coli priA DNA replication protein induces the SOS response

Many of the proteins that operate at the replication fork in Escherichia coli have been defined genetically. These include some of the subunits of the DNA polymerase III holoenzyme, the DnaB replication fork helicase, and the DnaG primase. The multiprotein primosome (which includes the DnaB and DnaG proteins), defined biochemically on the basis of its requirement during bacteriophage phi X174 complementary-strand synthesis, could serve as the helicase-primase replication machine on the lagging-strand template. In order to determine if this is the case, we have begun an investigation of the phenotypes of mutants with mutations priA, priB, and priC, which encode the primosomal proteins factor Y (protein n'), n, and n", respectively. Inactivation of priA by insertional mutagenesis resulted in the induction of the SOS response, as evinced by induction of a resident lambda prophage, extreme filamentation, and derepression of an indicator operon in which beta-galactosidase production was controlled by the dinD1 promoter. In addition, the copy numbers of resident pBR322 plasmids were reduced four- to fivefold in these strains, and production of phi X174 phage was delayed considerably. These results are discussed in the context of existing models for SOS induction and possible roles for the PriA protein at the replication fork in vivo.

The single-stranded DNA-binding protein of Escherichia coli

The single-stranded DNA-binding protein (SSB) of Escherichia coli is involved in all aspects of DNA metabolism: replication, repair, and recombination. In solution, the protein exists as a homotetramer of 18,843-kilodalton subunits. As it binds tightly and cooperatively to single-stranded DNA, it has become a prototypic model protein for studying protein-nucleic acid interactions. The sequences of the gene and protein are known, and the functional domains of subunit interaction, DNA binding, and protein-protein interactions have been probed by structure-function analyses of various mutations. The ssb gene has three promoters, one of which is inducible because it lies only two nucleotides from the LexA-binding site of the adjacent uvrA gene. Induction of the SOS response, however, does not lead to significant increases in SSB levels. The binding protein has several functions in DNA replication, including enhancement of helix destabilization by DNA helicases, prevention of reannealing of the single strands and protection from nuclease digestion, organization and stabilization of replication origins, primosome assembly, priming specificity, enhancement of replication fidelity, enhancement of polymerase processivity, and promotion of polymerase binding to the template. E. coli SSB is required for methyl-directed mismatch repair, induction of the SOS response, and recombinational repair. During recombination, SSB interacts with the RecBCD enzyme to find Chi sites, promotes binding of RecA protein, and promotes strand uptake.

An expectation maximization (EM) algorithm for the identification and characterization of common sites in unaligned biopolymer sequences

Statistical methodology for the identification and characterization of protein binding sites in a set of unaligned DNA fragments is presented. Each sequence must contain at least one common site. No alignment of the sites is required. Instead, the uncertainty in the location of the sites is handled by employing the missing information principle to develop an "expectation maximization" (EM) algorithm. This approach allows for the simultaneous identification of the sites and characterization of the binding motifs. The reliability of the algorithm increases with the number of fragments, but the computations increase only linearly. The method is illustrated with an example, using known cyclic adenosine monophosphate receptor protein (CRP) binding sites. The final motif is utilized in a search for undiscovered CRP binding sites.

"Strong incompatibility" between derivatives of the Streptomyces multi-copy plasmid pIJ101

Some derivatives of pIJ101, a 8.9 kb Streptomyces multi-copy plasmid, can co-exist with each other at similar copy numbers but others are strongly incompatible. The DNA sequence, sti, which causes this "strong incompatibility" was localised on a DNA segment of about 200 bp which is not part of the essential replication region of pIJ101. The sti function is active only when the DNA fragment carrying it is present in the natural orientation with respect to the basic replicon region of pIJ101. Pairs of plasmids which either both possess sti in the correct orientation (Sti+) or both lack sti or carry it in reverse orientation (Sti-) can co-exist, but Sti+ and Sti- plasmids cannot; in this case the Sti+ plasmid is retained and the Sti- plasmid is lost. This phenomenon is called strong incompatibility to distinguish it from classical incompatibility where identical or related plasmids are incompatible and dissimilar plasmids are compatible. pIJ101 probably replicates via a single-stranded intermediate; sti would be a site where the synthesis of the second (lagging) DNA strand is initiated because Sti- plasmids accumulate more single-stranded plasmid DNA than Sti+ plasmids. The copy number of pIJ101 and its derivatives is influenced by sti and by an additional trans-acting function (cop).

Multiple mechanisms for initiation of ColE1 DNA replication: DNA synthesis in the presence and absence of ribonuclease H

A transcript (RNA II) of plasmid ColE1 that hybridizes with the template DNA is cleaved by RNAase H and used as a primer by DNA polymerase I. However, the plasmid can replicate in bacteria lacking both enzymes, apparently using a different mechanism of initiation of replication. Here we report in vivo and in vitro studies on initiation of DNA replication in the presence or absence of either or both enzymes. Hybridization of RNA II with the template DNA is always required for initiation. Hybridized RNA II is cleaved by RNAase H to form a primer or used as a primer without cleavage by RNAase H. Hybridization also creates a single-stranded region on the nontranscribed strand that can serve as a template for synthesis of the lagging strand in a reaction that does not require DNA polymerase I. Lagging strand synthesis terminates 17 nucleotides upstream of the normal replication origin, forcing unidirectional replication.

The dnaA protein complex with the E. coli chromosomal replication origin (oriC) and other DNA sites

Specific binding of dnaA protein to the E. coli origin of replication (oriC) is essential for initiation of chromosomal replication. Based on binding of plasmid DNA fragments, dnaA protein recognizes in addition to oriC a number of specific sites: within or near the replication origins of pSC101, pBR322, and ColE1; within the regulatory regions of the dnaA and "X-protein" genes; and in IRL-Tn5. All strong binding sites share a common 9 bp sequence, 5'-TTATCACACAA, repeated at four conserved positions within oriC. As shown by DNAase I footprinting, dnaA protein binding is highly cooperative, covering 250 bp at oriC and 100 bp at single 9 bp sequence sites. Consistent with filter-binding and nuclease-protection studies, complexes of 20 to 30 dnaA monomers are visualized at oriC and other sites by electron microscopy. The functions of dnaA complexes and 9 bp sequences at these sites are discussed.

Replication initiated at the origin (oriC) of the E. coli chromosome reconstituted with purified enzymes

A crude soluble enzyme system capable of authentic replication of a variety of oriC plasmids has been replaced by purified proteins constituting three functional classes: initiation proteins (RNA polymerase, dnaA protein, gyrase) that recognize the oriC sequence and presumably prime the leading strand of the replication fork; replication proteins (DNA polymerase III holoenzyme, single-strand binding protein, primosomal proteins) that sustain progress of the replication fork; and specificity proteins (topoisomerase I, RNAase H, protein HU) that suppress initiation of replication at sequences other than oriC, coated with dnaA protein. Protein HU and unidentified factors in crude enzyme fractions stimulate replication at one or more stages. Replication has been separated temporally and physically into successive stages of RNA synthesis and DNA synthesis.

Structural and functional analysis of the par region of the pSC 10 1 plasmid

Three distinct segments (the partition-related, or PR segments) within the 370 bp par region of pSC101 have been shown by deletion analysis to be involved in partitioning of the plasmid to daughter cells. The two lateral segments are direct repeats, each of which potentially can pair with an inverted repeat located between them to form a hairpin-loop structure. Deletion of either lateral segment, together with the middle segment, results in plasmid instability (the Par- phenotype). Deletion of one PR segment yields a stable plasmid that nevertheless shows reduced ability to compete with a coexisting wild-type derivative of the same replicon (the Cmp- phenotype). Deletion of all three segments results in a rate of plasmid loss far in excess of that predicted from the observed copy number of the plasmid. Analysis of the segregation properties of these mutants and of temperature-sensitive and high copy number derivatives of the pSC101 replicon suggests a model in which the par function allows the nonreplicating plasmids of the intracellular pool to be counted as individual molecules, and to be distributed evenly to daughter cells. In the absence of par, the multicopy pool of plasmids behaves as a single segregation unit.

Mechanism of control of DNA replication and incompatibility in ColE1-type plasmids--a review

The related phenomena of ColE1 DNA replication control and plasmid incompatibility are analysed in detail. Replication is negatively regulated in different ways by two gene products, RNA I and gene rop-coded polypeptide, while plasmid incompatibility is specified only by RNA I. Thus, copy-number mutants in the RNA I region usually have altered incompatibility and vice versa. RNA I is transcribed from the opposite strand to RNA II; the processed RNA II transcript serves as the primer for DNA replication. The base-pairing interaction between RNA I and RNA II controls DNA synthesis and incompatibility by preventing primer formation. A model is proposed to explain the phenotype of RNA I mutants in terms of the changes they cause in the secondary structure of RNA I or RNA II.