A multi-station culture force monitor system to study cellular contractility

Force-Bioreactor for Assessing Pharmacological Therapies for Mechanobiological Targets

Tissue fibrosis is a major health issue that impacts millions of people and is costly to treat. However, few effective anti-fibrotic treatments are available. Due to their central role in fibrotic tissue deposition, fibroblasts and myofibroblasts are the target of many therapeutic strategies centered primarily on either inducing apoptosis or blocking mechanical or biochemical stimulation that leads to excessive collagen production. Part of the development of these drugs for clinical use involves in vitro prescreening. 2D screens, however, are not ideal for discovering mechanobiologically significant compounds that impact functions like force generation and other cell activities related to tissue remodeling that are highly dependent on the conditions of the microenvironment. Thus, higher fidelity models are needed to better simulate in vivo conditions and relate drug activity to quantifiable functional outcomes. To provide guidance on effective drug dosing strategies for mechanoresponsive drugs, we describe a custom force-bioreactor that uses a fibroblast-seeded fibrin gels as a relatively simple mimic of the provisional matrix of a healing wound. As cells generate traction forces, the volume of the gel reduces, and a calibrated and embedded Nitinol wire deflects in proportion to the generated forces over the course of 6 days while overhead images of the gel are acquired hourly. This system is a useful in vitro tool for quantifying myofibroblast dose-dependent responses to candidate biomolecules, such as blebbistatin. Administration of 50 μM blebbistatin reliably reduced fibroblast force generation approximately 40% and lasted at least 40 h, which in turn resulted in qualitatively less collagen production as determined via fluorescent labeling of collagen.

Collagen gel contraction assays: From modelling wound healing to quantifying cellular interactions with three-dimensional extracellular matrices

Cells respond to and actively remodel the extracellular matrix (ECM). The dynamic and bidirectional interaction between cells and ECM, especially their mechanical interactions, has been found to play an essential role in triggering a series of complex biochemical and biomechanical signal pathways and in regulating cellular functions and behaviours. The collagen gel contraction assay (CGCA) is a widely used method to investigate cell-ECM interactions in 3D environments and provides a mechanically associated readout reflecting 3D cellular contractility. In this review, we summarize various versions of CGCA, with an emphasis on recent high-throughput and low-consumption CGCA techniques. More importantly, we focus on the technique of force monitoring during the contraction of collagen gel, which provides a quantitative characterization of the overall forces generated by all the resident cells in the collagen hydrogel. Accordingly, we present recent biological applications of the CGCA, which have expanded from the initial wound healing model to other studies concerning cell-ECM interactions, including fibrosis, cancer, tissue repair and the preparation of biomimetic microtissues.

What do cells regulate in soft tissues on short time scales?

Cells within living soft biological tissues seem to promote the maintenance of a mechanical state within a defined range near a so-called set-point. This mechanobiological process is often referred to as mechanical homeostasis. During this process, cells interact with the fibers of the surrounding extracellular matrix (ECM). It remains poorly understood, however, what individual cells actually regulate during these interactions, and how these micromechanical regulations are translated to the tissue-level to lead to what we observe as biomaterial properties. Herein, we examine this question by a combination of experiments, theoretical analysis, and computational modeling. We demonstrate that on short time scales (hours) - during which deposition and degradation of ECM fibers can largely be neglected - cells appear to not regulate the stress / strain in the ECM or their own shape, but rather only the contractile forces that they exert on the surrounding ECM. STATEMENT OF SIGNIFICANCE: Cells in soft biological tissues sense and regulate the mechanical state of the extracellular matrix to ensure structural integrity and functionality. This so-called mechanical homeostasis plays an important role in the natural history of various diseases such as aneurysms in the cardiovascular system or cancer. Yet, it remains poorly understood to date which target quantity cells regulate on the mircroscale and how it translates to the macroscale. In this paper, we combine experiments, computer simulations, and theoretical analysis to compare different hypotheses about this target quantity. This allows us to identify a likely candidate for it at least on short time scales and in the simplified environment of tissue equivalents.

Soft Polymer-Based Technique for Cellular Force Sensing

Soft polymers have emerged as a vital type of material adopted in biomedical engineering to perform various biomechanical characterisations such as sensing cellular forces. Distinct advantages of these materials used in cellular force sensing include maintaining normal functions of cells, resembling in vivo mechanical characteristics, and adapting to the customised functionality demanded in individual applications. A wide range of techniques has been developed with various designs and fabrication processes for the desired soft polymeric structures, as well as measurement methodologies in sensing cellular forces. This review highlights the merits and demerits of these soft polymer-based techniques for measuring cellular contraction force with emphasis on their quantitativeness and cell-friendliness. Moreover, how the viscoelastic properties of soft polymers influence the force measurement is addressed. More importantly, the future trends and advancements of soft polymer-based techniques, such as new designs and fabrication processes for cellular force sensing, are also addressed in this review.

A computational framework for modeling cell-matrix interactions in soft biological tissues

Living soft tissues appear to promote the development and maintenance of a preferred mechanical state within a defined tolerance around a so-called set point. This phenomenon is often referred to as mechanical homeostasis. In contradiction to the prominent role of mechanical homeostasis in various (patho)physiological processes, its underlying micromechanical mechanisms acting on the level of individual cells and fibers remain poorly understood, especially how these mechanisms on the microscale lead to what we macroscopically call mechanical homeostasis. Here, we present a novel computational framework based on the finite element method that is constructed bottom up, that is, it models key mechanobiological mechanisms such as actin cytoskeleton contraction and molecular clutch behavior of individual cells interacting with a reconstructed three-dimensional extracellular fiber matrix. The framework reproduces many experimental observations regarding mechanical homeostasis on short time scales (hours), in which the deposition and degradation of extracellular matrix can largely be neglected. This model can serve as a systematic tool for future in silico studies of the origin of the numerous still unexplained experimental observations about mechanical homeostasis.

Mechanical homeostasis in tissue equivalents: a review

There is substantial evidence that growth and remodeling of load bearing soft biological tissues is to a large extent controlled by mechanical factors. Mechanical homeostasis, which describes the natural tendency of such tissues to establish, maintain, or restore a preferred mechanical state, is thought to be one mechanism by which such control is achieved across multiple scales. Yet, many questions remain regarding what promotes or prevents homeostasis. Tissue equivalents, such as collagen gels seeded with living cells, have become an important tool to address these open questions under well-defined, though limited, conditions. This article briefly reviews the current state of research in this area. It summarizes, categorizes, and compares experimental observations from the literature that focus on the development of tension in tissue equivalents. It focuses primarily on uniaxial and biaxial experimental studies, which are well-suited for quantifying interactions between mechanics and biology. The article concludes with a brief discussion of key questions for future research in this field.

Computer-Controlled Biaxial Bioreactor for Investigating Cell-Mediated Homeostasis in Tissue Equivalents

Soft biological tissues consist of cells and extracellular matrix (ECM), a network of diverse proteins, glycoproteins, and glycosaminoglycans that surround the cells. The cells actively sense the surrounding ECM and regulate its mechanical state. Cell-seeded collagen or fibrin gels, so-called tissue equivalents, are simple but powerful model systems to study this phenomenon. Nevertheless, few quantitative studies document the stresses that cells establish and maintain in such gels; moreover, most prior data were collected via uniaxial experiments whereas soft tissues are mainly subject to multiaxial loading in vivo. To begin to close this gap between existing experimental data and in vivo conditions, we describe here a computer-controlled bioreactor that enables accurate measurements of the evolution of mechanical tension and deformation of tissue equivalents under well-controlled biaxial loads. This device allows diverse studies, including how cells establish a homeostatic state of biaxial stress and if they maintain it in response to mechanical perturbations. It similarly allows, for example, studies of the impact of cell and matrix density, exogenous growth factors and cytokines, and different types of loading conditions (uniaxial, strip-biaxial, and biaxial) on these processes. As illustrative results, we show that NIH/3T3 fibroblasts establish a homeostatic mechanical state that depends on cell density and collagen concentration. Following perturbations from this homeostatic state, the cells were able to recover biaxial loading similar to homeostatic. Depending on the precise loads, however, they were not always able to fully maintain that state.

Mechanosensation across borders: fibroblasts inside a macroporous scaffold sense and respond to the mechanical environment beyond the scaffold walls

In tissue defects, cells face distinct mechanical boundary conditions, but how this influences early stages of tissue regeneration remains largely unknown. Biomaterials are used to fill defects but also to provide specific mechanical or geometrical signals. However, they might at the same time shield mechanical information from surrounding tissues that is relevant for tissue functionalisation. This study investigated how fibroblasts in a soft macroporous biomaterial scaffold respond to distinct mechanical environments while they form microtissues. Different boundary stiffnesses counteracting scaffold contraction were provided via a newly developed in vitro setup. Online monitoring over 14 days revealed 3.0 times lower microtissue contraction but 1.6 times higher contraction force for high vs. low stiffness. This difference was significant already after 48 h, a very early stage of microtissue growth. The microtissue's mechanical and geometrical adaptation indicated a collective cellular behaviour and mechanical communication across scaffold pore walls. Surprisingly, the stiffness of the environment influenced cell behaviour even inside macroporous scaffolds where direct cell-cell contacts are hindered. Mechanical communication between cells via traction forces is essential for tissue adaptation to the environment and should not be blocked by rigid biomaterials. Copyright © 2017 John Wiley & Sons, Ltd.

A novel collagen gel-based measurement technique for quantitation of cell contraction force

Cell contraction force plays an important role in wound healing, inflammation,angiogenesis and metastasis. This study describes a novel method to quantify single cell contraction force in vitro using human aortic adventitial fibroblasts embedded in a collagen gel. The technique is based on a depth sensing nano-indentation tester to measure the thickness and elasticity of collagen gels containing stimulated fibroblasts and a microscopy imaging system to estimate the gel area. In parallel, a simple theoretical model has been developed to calculate cell contraction force based on the measured parameters. Histamine (100 mM) was used to stimulate fibroblast contraction while the myosin light chain kinase inhibitor ML-7 (25 mM) was used to inhibit cell contraction. The collagen matrix used in the model provides a physiological environment for fibroblast contraction studies. Measurement of changes in collagen gel elasticity and thickness arising from histamine treatments provides a novel convenient technique to measure cell contraction force within a collagen matrix. This study demonstrates that histamine can elicit a significant increase in contraction force of fibroblasts embedded in collagen,while the Young's modulus of the gel decreases due to the gel degradation.

Direct observation of CD4 T cell morphologies and their cross-sectional traction force derivation on quartz nanopillar substrates using focused ion beam technique

Direct observations of the primary mouse CD4 T cell morphologies, e.g., cell adhesion and cell spreading by culturing CD4 T cells in a short period of incubation (e.g., 20 min) on streptavidin-functionalized quartz nanopillar arrays (QNPA) using a high-content scanning electron microscopy method were reported. Furthermore, we first demonstrated cross-sectional cell traction force distribution of surface-bound CD4 T cells on QNPA substrates by culturing the cells on top of the QNPA and further analysis in deflection of underlying QNPA via focused ion beam-assisted technique.

Patterning methods for polymers in cell and tissue engineering

Polymers provide a versatile platform for mimicking various aspects of physiological extracellular matrix properties such as chemical composition, rigidity, and topography for use in cell and tissue engineering applications. In this review, we provide a brief overview of patterning methods of various polymers with a particular focus on biocompatibility and processability. The materials highlighted here are widely used polymers including thermally curable polydimethyl siloxane, ultraviolet-curable polyurethane acrylate and polyethylene glycol, thermo-sensitive poly(N-isopropylacrylamide) and thermoplastic and conductive polymers. We also discuss how micro- and nanofabricated polymeric substrates of tunable elastic modulus can be used to engineer cell and tissue structure and function. Such synergistic effect of topography and rigidity of polymers may be able to contribute to constructing more physiologically relevant microenvironment.

Application of sensing techniques to cellular force measurement

Cell traction forces (CTFs) are the forces produced by cells and exerted on extracellular matrix or an underlying substrate. CTFs function to maintain cell shape, enable cell migration, and generate and detect mechanical signals. As such, they play a vital role in many fundamental biological processes, including angiogenesis, inflammation, and wound healing. Therefore, a close examination of CTFs can enable better understanding of the cellular and molecular mechanisms of such processes. To this end, various force-sensing techniques for CTF measurement have been developed over the years. This article will provide a concise review of these sensing techniques and comment on the needs for improved force-sensing technologies for cell mechanics and biology research.

Cell Traction Forces (CTFs) and CTF Microscopy Applications in Musculoskeletal Research

Most connective tissue cells (e.g. tendon and ligament cells) attach to extracellular matrix (ECM) and exert so-called cell traction forces (CTFs) to the ECM. CTFs are essential for many cellular functions such as maintenance of cell shape, cell motility, and cell communication. Therefore, many techniques have been developed over the years to measure CTFs in order to better understand tissue physiology and pathology. This article provides a brief review of CTF in terms of its generation and transmission and also CTF measurement techniques, with a focus on cell traction force microscopy (CTFM). Examples of using CTFM to determine CTFs are given to illustrate various applications of CTFM. Finally, the potential applications of CTFM in musculoskeletal research are suggested.

Boundary stiffness regulates fibroblast behavior in collagen gels

Recent studies have illustrated the profound dependence of cellular behavior on the stiffness of 2D culture substrates. The goal of this study was to develop a method to alter the stiffness cells experience in a standard 3D collagen gel model without affecting the physiochemical properties of the extracellular matrix. A device was developed utilizing compliant anchors (0.048-0.64 N m(-1)) to tune the boundary stiffness of suspended collagen gels in between the commonly utilized free and fixed conditions (zero and infinite stiffness boundary stiffness). We demonstrate the principle of operation with finite element analyses and a wide range of experimental studies. In all cases, boundary stiffness has a strong influence on cell behavior, most notably eliciting higher basal tension and activated force (in response to KCl) and more pronounced remodeling of the collagen matrix at higher boundary stiffness levels. Measured equibiaxial forces for gels seeded with 3 million human foreskin fibroblasts range from 0.05 to 1 mN increasing monotonically with boundary stiffness. Estimated force per cell ranges from 17 to 100 nN utilizing representative volume element analysis. This device provides a valuable tool to independently study the effect of the mechanical environment of the cell in a 3D collagen matrix.

Fibroblasts and myofibroblasts in wound healing: force generation and measurement

Fibroblasts are one of the most abundant cell types in connective tissues. These cells are responsible for tissue homeostasis under normal physiological conditions. When tissues are injured, fibroblasts become activated and differentiate into myofibroblasts, which generate large contractions and actively produce extracellular matrix (ECM) proteins to facilitate wound closure. Both fibroblasts and myofibroblasts play a critical role in wound healing by generating traction and contractile forces, respectively, to enhance wound contraction. This review focuses on the mechanisms of force generation in fibroblasts and myofibroblasts and techniques for measuring such cellular forces. Such a topic was chosen specifically because of the dual effects that fibroblasts/myofibroblasts have in wound healing process- a suitable amount of force generation and matrix deposition is beneficial for wound healing; excessive force and matrix production, however, result in tissue scarring and even malfunction of repaired tissues. Therefore, understanding how forces are generated in these cells and knowing exactly how much force they produce may guide the development of optimal protocols for more effective treatment of tissue wounds in clinical settings.

Quantifying the traction force of a single cell by aligned silicon nanowire array

The physical behaviors of stationary cells, such as the morphology, motility, adhesion, anchorage, invasion and metastasis, are likely to be important for governing their biological characteristics. A change in the physical properties of mammalian cells could be an indication of disease. In this paper, we present a silicon-nanowire-array based technique for quantifying the mechanical behavior of single cells representing three distinct groups: normal mammalian cells, benign cells (L929), and malignant cells (HeLa). By culturing the cells on top of NW arrays, the maximum traction forces of two different tumor cells (HeLa, L929) have been measured by quantitatively analyzing the bending of the nanowires. The cancer cell exhibits a larger traction force than the normal cell by approximately 20% for a HeLa cell and approximately 50% for a L929 cell. The traction forces have been measured for the L929 cells and mechanocytes as a function of culture time. The relationship between cells extending area and their traction force has been investigated. Our study is likely important for studying the mechanical properties of single cells and their migration characteristics, possibly providing a new cellular level diagnostic technique.

In situ collagen assembly for integrating microfabricated three-dimensional cell-seeded matrices

Microscale fabrication of three-dimensional (3D) extracellular matrices (ECMs) can be used to mimic the often inhomogeneous and anisotropic properties of native tissues and to construct in vitro cellular microenvironments. Cellular contraction of fibrous natural ECMs (such as fibrin and collagen I) can detach matrices from their surroundings and destroy intended geometry. Here, we demonstrate in situ collagen fibre assembly (the nucleation and growth of new collagen fibres from preformed collagen fibres at an interface) to anchor together multiple phases of cell-seeded 3D hydrogel-based matrices against cellular contractile forces. We apply this technique to stably interface multiple microfabricated 3D natural matrices (containing collagen I, Matrigel, fibrin or alginate); each phase can be seeded with cells and designed to permit cell spreading. With collagen-fibre-mediated interfacing, microfabricated 3D matrices maintain stable interfaces (the individual phases do not separate from each other) over long-term culture (at least 3 weeks) and support spatially restricted development of multicellular structures within designed patterns. The technique enables construction of well-defined and stable patterns of a variety of 3D ECMs formed by diverse mechanisms (including temperature-, ion- and enzyme-mediated crosslinking), and presents a simple approach to interface multiple 3D matrices for biological studies and tissue engineering.

Mechanobiology of adult and stem cells

Mechanical forces, including gravity, tension, compression, hydrostatic pressure, and fluid shear stress, play a vital role in human physiology and pathology. They particularly influence extracellular matrix (ECM) gene expression, ECM protein synthesis, and production of inflammatory mediators of many load-sensitive adult cells such as fibroblasts, chondrocytes, smooth muscle cells, and endothelial cells. Furthermore, the mechanical forces generated by cells themselves, known as cell traction forces (CTFs), also influence many biological processes such as wound healing, angiogenesis, and metastasis. Thus, the quantitative characterization of CTFs by qualities such as magnitude and distribution is useful for understanding physiological and pathological events at the tissue and organ levels. Recently, the effects of mechanical loads on embryonic and adult stem cells in terms of self-renewal, differentiation, and matrix protein expression have been investigated. While it seems certain that mechanical loads applied to stem cells regulate their self-renewal and induce controlled cell lineage differentiation, the detailed molecular signaling mechanisms responsible for these mechano-effects remain to be elucidated. Challenges in the fields of both adult- and stem-cell mechanobiology include devising novel experimental and theoretical methodologies to examine mechano-responses more closely to various forms of mechanical forces and mechanotransduction mechanisms of these cells in a more physiologically accurate setting. Such novel methodologies will lead to better understanding of various pathological diseases, their management, and translational applications in the ever expanding field of tissue engineering.

Nitric oxide inhibits enterocyte migration through activation of RhoA-GTPase in a SHP-2-dependent manner

Diseases of intestinal inflammation like necrotizing enterocolitis (NEC) are associated with impaired epithelial barrier integrity and the sustained release of intestinal nitric oxide (NO). NO modifies the cytoskeletal regulator RhoA-GTPase, suggesting that NO could affect barrier healing by inhibiting intestinal restitution. We now hypothesize that NO inhibits enterocyte migration through RhoA-GTPase and sought to determine the pathways involved. The induction of NEC was associated with increased enterocyte NO release and impaired migration of bromodeoxyuridine-labeled enterocytes from terminal ileal crypts to villus tips. In IEC-6 enterocytes, NO significantly inhibited enterocyte migration and activated RhoA-GTPase while increasing the formation of stress fibers. In parallel, exposure of IEC-6 cells to NO increased the phosphorylation of focal adhesion kinase (pFAK) and caused a striking increase in cell-matrix adhesiveness, suggesting a mechanism by which NO could impair enterocyte migration. NEC was associated with increased expression of pFAK in the terminal ileal mucosa of wild-type mice and a corresponding increase in disease severity compared with inducible NO synthase knockout mice, confirming the dependence of NO for FAK phosphorylation in vivo and its role in the pathogenesis of NEC. Strikingly, inhibition of the protein tyrosine phosphatase SHP-2 in IEC-6 cells prevented the activation of RhoA by NO, restored focal adhesions, and reversed the inhibitory effects of NO on enterocyte migration. These data indicate that NO impairs mucosal healing by inhibiting enterocyte migration through activation of RhoA in a SHP-2-dependent manner and support a possible role for SHP-2 as a therapeutic target in diseases of intestinal inflammation like NEC.

Cell traction force and measurement methods

Cell traction forces (CTFs) are crucial to many biological processes such as inflammation, wound healing, angiogenesis, and metastasis. CTFs are generated by actomyosin interactions and actin polymerization and regulated by intracellular proteins such as alpha-smooth muscle actin (alpha-SMA) and soluble factors such as transforming growth factor-beta (TGF-beta). Once transmitted to the extracellular matrix (ECM) through stress fibers via focal adhesions, which are assemblies of ECM proteins, transmembrane receptors, and cytoplasmic structural and signaling proteins (e.g., integrins), CTFs direct many cellular functions, including cell migration, ECM organization, and mechanical signal generation. Various methods have been developed over the years to measure CTFs of both populations of cells and of single cells. At present, cell traction force microscopy (CTFM) is among the most efficient and reliable method for determining CTF field of an entire cell spreading on a two-dimensional (2D) substrate surface. There are currently three CTFM methods, each of which is unique in both how displacement field is extracted from images and how CTFs are subsequently estimated. A detailed review and comparison of these methods are presented. Future research should improve CTFM methods such that they can automatically track dynamic CTFs, thereby providing new insights into cell motility in response to altered biological conditions. In addition, research effort should be devoted to developing novel experimental and theoretical methods for determining CTFs in three-dimensional (3D) matrix, which better reflects physiological conditions than 2D substrate used in current CTFM methods.

Healing and Normal Fibroblasts Exhibit Differential Proliferation, Collagen Production, α-SMA Expression, and Contraction

This study determines the differences in proliferation, collagen production, alpha-smooth muscle actin (alpha-SMA) expression, and contraction between healing and normal fibroblasts. Transected and sham-operated rat medial collateral ligaments (MCL) were used to obtain healing and normal fibroblasts, respectively. It was found that healing fibroblasts in monolayer culture proliferated 1.4-fold faster at 48 h and had 1.7-fold greater protein expression of alpha-SMA than normal fibroblasts. In addition, it was noted that the proliferation of healing fibroblasts in collagen gels was not significantly different from that of normal fibroblasts at 24 h, but it was at 48 h. Furthermore, in collagen gels, healing fibroblasts produced more type I collagen than normal fibroblasts and generated 1.6- and 1.7-fold larger contractile forces at 15 and 20 h, respectively, than their normal counterparts. Taken together, the results of this study show that healing fibroblasts possess a differential proliferation, alpha-SMA protein expression, and contraction than normal fibroblasts.

Contractile forces generated by striae distensae fibroblasts embedded in collagen lattices

Striae distensae are characterized by linear, smooth bands of atrophic-appearing skin that are reddish at first and finally white. They are due to stretching of the skin, as in rapid weight gain, or mechanical stress, as in weight lifting. The pathogenesis of striae distensae is unknown but probably relates to changes in the fibroblast phenotype. In order to characterize striae distensae fibroblasts, alpha-smooth muscle actin expression and contractile forces were studied. Five healthy women with early erythematous striae and five healthy women with older striae were selected. Paired biopsies were taken from the center of lesional striae and adjacent normal skin. Fibroblasts were obtained by an explant technique and expanded in vitro in Dulbecco's modified Eagle's medium. Contractile forces generated by fibroblasts in collagen lattices were measured with the Glasbox device developed in our laboratory. Alpha-smooth muscle actin expression was studied by immunofluorescence labeling of cells and by flow cytometry. Fibroblasts from early striae distensae were the richest cells in alpha-smooth muscle actin filaments and generated the highest contractile forces. Their peak contractile force was 26% greater than normal fibroblasts. There was a 150% higher level of alpha-smooth muscle actin content in fibroblasts from early striae distensae compared with fibroblasts from normal skin. In contrast, there was no significant difference in force generation between old striae fibroblasts and normal fibroblasts with cells expressing no alpha-smooth muscle actin. The contractile properties of fibroblasts from striae distensae varies depending on the stage of the disease. In early striae distensae, fibroblasts acquire a more contractile phenotype, corresponding to that of myofibroblasts.

Mechanobiology of tendon

Tendons are able to respond to mechanical forces by altering their structure, composition, and mechanical properties--a process called tissue mechanical adaptation. The fact that mechanical adaptation is effected by cells in tendons is clearly understood; however, how cells sense mechanical forces and convert them into biochemical signals that ultimately lead to tendon adaptive physiological or pathological changes is not well understood. Mechanobiology is an interdisciplinary study that can enhance our understanding of mechanotransduction mechanisms at the tissue, cellular, and molecular levels. The purpose of this article is to provide an overview of tendon mechanobiology. The discussion begins with the mechanical forces acting on tendons in vivo, tendon structure and composition, and its mechanical properties. Then the tendon's response to exercise, disuse, and overuse are presented, followed by a discussion of tendon healing and the role of mechanical loading and fibroblast contraction in tissue healing. Next, mechanobiological responses of tendon fibroblasts to repetitive mechanical loading conditions are presented, and major cellular mechanotransduction mechanisms are briefly reviewed. Finally, future research directions in tendon mechanobiology research are discussed.

Comparing the contractile properties of human fibroblasts in leg ulcers with normal fibroblasts

OBJECTIVE

The tissue contraction phenomenon associated with wound healing is of prime importance for wound closure. Contractile properties of human fibroblasts from chronic venous leg ulcers were compared with those of normal fibroblasts using in vitro models.

METHOD

Biopsies were taken from the uninvolved skin of the thigh, the epithelialised ulcer edge and the non-epithelialised ulcer centre in four patients (average age: 78 years). Fibroblasts were obtained by an explant technique and expanded in vitro in Dulbecco's Modified Eagle's Medium supplemented with 10% foetal calf serum and used for the assays at their fourth passage. Intracellular alpha-smooth muscle actin expression (alphaSM-actin) was studied by immunofluorescence labelling of cells cultured in monolayer. Contractile properties were evaluated using three-dimensional collagen lattices.

RESULTS

Fibroblasts from the ulcer centre were the richest cells in actin filaments. Both populations of venous ulcer fibroblasts contracted more rapidly and to a greater extent than normal fibroblasts. The peak contractile forces developed by fibroblasts from the ulcer centre and the ulcer edge were 30% and 18% greater than normal fibroblasts respectively.

CONCLUSION

Some functions of fibroblasts, in particular the generation of contractile forces and the formation of cytoplasmic actin filaments, seem not to be affected in chronic venous ulcers.

DECLARATION OF INTEREST

This study was supported by the Fondation Coloplast pour la Qualite de la Vie of France.

A multi-station dynamic-culture force monitor system to study cell mechanobiology

To study mechanobiological responses of cells, a dynamic-culture force monitor (D-CFM) system has been developed. The D-CFM extends our previous work to measure contractile forces of a cell-populated collagen gel (CPCG) using a cantilever beam with semiconductor strain gauges. Linear actuators are used in the system and are computer controlled using a LabVIEW interface to independently apply precise motion waveforms to multiple CPCGs. The feasibility tests showed that the new system can detect the differences in force patterns resulting from different motion waveforms imparted to the CPCG. This new system will facilitate the study of the effects of dynamic mechanical loading on cells, remodeling of extracellular matrix, and cell-matrix interactions in vitro.

Endotoxin inhibits intestinal epithelial restitution through activation of Rho-GTPase and increased focal adhesions

Diseases of gut inflammation such as neonatal necrotizing enterocolitis (NEC) result after an injury to the mucosal lining of the intestine, leading to translocation of bacteria and endotoxin (lipopolysaccharide). Intestinal mucosal defects are repaired by the process of intestinal restitution, during which enterocytes migrate from healthy areas to sites of injury. In an animal model of NEC, we determined that intestinal restitution was significantly impaired compared with control animals. We therefore sought to determine the mechanisms governing enterocyte migration under basal conditions and after an endotoxin challenge. Here we show that the cytoskeletal reorganization and stress fiber formation required for migration in IEC-6 enterocytes requires RhoA. Enterocytes were found to express the endotoxin receptor Toll-like receptor 4, which served to bind and internalize lipopolysaccharide. Strikingly, endotoxin treatment significantly inhibited intestinal restitution, as measured by impaired IEC-6 cell migration across a scraped wound. Lipopolysaccharide was found to increase RhoA activity in a phosphatidylinositol 3-kinase-dependent manner, leading to an increase in phosphorylation of focal adhesion kinase and an enhanced number of focal adhesions. Importantly, endotoxin caused a progressive, RhoA-dependent increase in cell matrix tension/contractility, which correlated with the observed impairment in enterocyte migration. We therefore conclude that endotoxin inhibits enterocyte migration through a RhoA-dependent increase in focal adhesions and enhanced cell adhesiveness, which may participate in the impaired restitution observed in experimental NEC.