1
|
Torabi M, Khorramymehr S, Nikkhoo M, Rostami M. The effect of orthopedic screw profiles on the healing time of femoral neck fracture. Comput Methods Biomech Biomed Engin 2021; 25:97-110. [PMID: 34459294 DOI: 10.1080/10255842.2021.1932840] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
Abstract
One possible treatment for femoral neck fractures, especially in young people, is the use of bone screws or Lug screws. The design of these implants requires taking into account the biocompatibility of materials, mechanical properties plus surface properties, and thread's geometric, as well as chemical properties, etc. Various profiles are designed for fracture fixation. The most famous of these profiles, which are introduced by the ISO standard, are HB, HC, and HD type profiles. This article investigates the performance of these profiles in reducing or increasing the healing time. This study is based on the rule of bone remodeling and using a set of three-dimensional computational (finite element) models. The study revealed that the HB profile outperformed the other two profiles. Meanwhile, HD profile was also better than HC profile.
Collapse
Affiliation(s)
- Masoud Torabi
- Department of Biomedical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
| | - Siamak Khorramymehr
- Department of Biomedical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
| | - Mohammad Nikkhoo
- Department of Biomedical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
| | - Mostafa Rostami
- Department of Biomedical Engineering, Amirkabir University of Technology, Tehran, Iran
| |
Collapse
|
2
|
Ni PL, Lin KC, Chen CY, Tarng YW, Chang WN, Renn JH. Peri-implant Fractures Following Hook Plate Fixation for Unstable Distal Clavicle Fractures. Orthopedics 2020; 43:e359-e363. [PMID: 32602920 DOI: 10.3928/01477447-20200619-01] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 12/26/2018] [Accepted: 05/20/2019] [Indexed: 02/03/2023]
Abstract
Clavicle hook plate is a common implant for treating distal clavicle fracture. Although high bone union rate and good functional outcome have been reported, so have several complications, such as osteolysis and fracture of the acromion, loss reduction, hook impingement, and rotator cuff tear. Peri-implant fracture over the medial side of the hook plate is a rare complication. Sporadic cases have been reported, and most of them have had no history of trauma. Between June 2015 and August 2018, 7 patients treated for distal clavicle fracture with a 3.5-mm locking compression hook plate with no history of trauma experienced peri-implant fracture of the medial clavicle. This complication occurred at a mean of 29 days. The incidence rate was 9.8%. Peri-implant fracture following hook plate fixation for distal clavicle fracture was not rare. Small hook angle, prolonged retention of the implant, an eccentric medial screw, high plate screw density, and small clavicle diameter may be risk factors for peri-implant fracture. Regarding treatment, 2 patients chose fracture revision with a distal clavicle locking plate and 5 patients chose conservative treatment. All patients achieved bone union at fracture sites. Surgical and conservative management of peri-implant fracture can achieve good functional outcome. [Orthopedics. 2020;43(5);e359-e363.].
Collapse
|
3
|
Three-Dimensional Finite Element Analysis of Maxillary Sinus Floor Augmentation with Optimal Positioning of a Bone Graft Block. Symmetry (Basel) 2018. [DOI: 10.3390/sym10020033] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022] Open
|
4
|
Introduction of Maximum Stress Parameter for the Evaluation of Stress Shielding Around Orthopedic Screws in the Presence of Bone Remodeling Process. J Med Biol Eng 2017. [DOI: 10.1007/s40846-017-0267-8] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/19/2022]
|
5
|
Haase K, Rouhi G. Prediction of stress shielding around an orthopedic screw: Using stress and strain energy density as mechanical stimuli. Comput Biol Med 2013; 43:1748-57. [DOI: 10.1016/j.compbiomed.2013.07.032] [Citation(s) in RCA: 33] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/21/2013] [Revised: 07/13/2013] [Accepted: 07/29/2013] [Indexed: 10/26/2022]
|
6
|
Kumar V, Mehrotra D, Mohammad S, Singh RK, Singh V, Singh G, Gambhir S. Anchor lag screw vs conventional lag screw in mandibular fractures: A series of 30 cases. J Oral Biol Craniofac Res 2013; 3:15-9. [PMID: 25737874 DOI: 10.1016/j.jobcr.2013.01.002] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/17/2012] [Accepted: 01/23/2013] [Indexed: 10/27/2022] Open
Abstract
UNLABELLED Lag screw osteosynthesis is a well proven technique. Its application is limited by the fact that the spherical head of the screw act as wedge. Combining this screw with a bioconcave washer has broadened the range of applications for lag screw osteosynthesis in the maxillofacial region. PURPOSE The aim of the study was to compare the efficacy of anchor lag screw with conventional lag screw in anterior mandibular fractures. PATIENTS AND METHOD Thirty patients with anterior mandible fractures with no concomitant fractures, infection or extraoral communication, who visited our outpatient Department of Oral and Maxillofacial Surgery, were included in the study after obtaining their informed consent. Patients were randomly divided into two groups; where Group A underwent fixation using conventional lag screw and Group B anchor lag screw. The fixation system used included 2 mm titanium lag screws of sizes 25 mm, 27 mm and 30 mm and 3 mm titanium bioconcave washer. At each follow up visit, clinical data was collected detailing clinical presentation of healing and radiographic findings. RESULTS Radiographic features at post surgery evaluation indicated loss of bone contact around the screw head and bone resorption in five patients of Group A, thus causing loosening of lag screw whereas none of the patient in Group B, was found to have any such complication. CONCLUSIONS The findings support the hypothesis that bioconcave washer aids in holding up the farthest fragment at the interface of the fracture fragment. Application of bioconcave washer provides easy loading of lag screw.
Collapse
Affiliation(s)
- Vimlesh Kumar
- Lecturer, Oral and Dental Surgery Department, B. R. D. Medical College, Gorakhpur 273013, Uttar Pradesh, India
| | - Divya Mehrotra
- Professor, Department of Oral & Maxillofacial Surgery, Faculty of Dental Sciences, King George Medical University, Lucknow, India
| | - Shadab Mohammad
- Professor & Head, Department of Oral & Maxillofacial Surgery, Faculty of Dental Sciences, King George Medical University, Lucknow, India
| | - R K Singh
- Professor, Department of Oral & Maxillofacial Surgery, Faculty of Dental Sciences, King George Medical University, Lucknow, India
| | - Vibha Singh
- Associate Professor, Department of Oral & Maxillofacial Surgery, Faculty of Dental Sciences, King George Medical University, Lucknow, India
| | - Geeta Singh
- Assistant Professor, Department of Oral & Maxillofacial Surgery, Faculty of Dental Sciences, King George Medical University, Lucknow, India
| | - Sanjay Gambhir
- Professor and Head, Department of Nuclear Medicine, Sanjay Gandhi Post Graduate Institute, Lucknow, India
| |
Collapse
|
7
|
Zanetti EM, Salaorno M, Grasso G, Audenino AL. Parametric analysis of orthopedic screws in relation to bone density. Open Med Inform J 2009; 3:19-26. [PMID: 19587807 PMCID: PMC2705136 DOI: 10.2174/1874431100903010019] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/23/2009] [Revised: 02/22/2009] [Accepted: 03/18/2009] [Indexed: 11/22/2022] Open
Abstract
A global study of geometry and material properties of orthopedic screws was performed, considering not only the effect of each single factor (screw pitch, number of threads, fillet angle, etc.) but also their interactions with respect to bone density. The stress patterns resulting from different screw geometries and bone densities were analyzed using finite element techniques, taking into account different levels of osseointegration between the screw and the bone. These numerical models where validated through experimental pull-out tests, where a pull out force of 120 N produced localized failure of the last thread (stresses above 0.42 MPa). The results of the numerical simulations were then summarised using a multi-factorial parametric analysis. This demonstrated the great relevance of the interaction between bone density and screw pitch, showing that the optimal screw pitch can vary by more than 25% for different densities (0.35 g/cm3 and 0.47 g/cm3, respectively). The parameters calculated by means of the multi-factorial analysis allow the pull out force to be estimated for different osseointegration levels, different screw geometries and material properties, and for different bone densities. The final objective is to determine the best choice of implant for each individual patient.
Collapse
Affiliation(s)
- Elisabetta M Zanetti
- Department of Industrial and Mechanical Engineering (DIIM), University of Catania, V.le Andrea Doria 6, 95125 Catania, Italy
| | | | | | | |
Collapse
|
8
|
Gao J, Xu W, Ding Z. 3D finite element mesh generation of complicated tooth model based on CT slices. COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE 2006; 82:97-105. [PMID: 16621128 DOI: 10.1016/j.cmpb.2006.02.008] [Citation(s) in RCA: 17] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/02/2004] [Revised: 02/09/2006] [Accepted: 02/09/2006] [Indexed: 05/08/2023]
Abstract
An interactive three-dimensional finite element generation method is presented for modelling a multi-connected teeth and mandible structure. The tetrahedron is chosen as the basic element type due to its rigorous adaptability to structures with geometric complexities. The mesh generation is implemented by allocating two quadrangles in adjacent CT image slices to form a set of tetrahedrons. By examining all the possible allocations and their degradations, an algorithm is developed for interactive mesh generation, resulting in a series of tetrahedrons consistent with all the others without overlapping and spacing. The developed system was applied to a tooth-mandibular structure, generating a complicated 3D FEM model consisting of 4762 nodes and 18,534 tetrahedral elements with nine different materials. This 3D model was successfully used to evaluate different tooth restoration strategies, which proved the viability and effectiveness of the proposed method.
Collapse
Affiliation(s)
- Jianxin Gao
- Centre for Biomedical Engineering, School of Engineering, University of Surrey, Guildford, Surrey GU2 7XH, UK
| | | | | |
Collapse
|
9
|
Be'ery-Lipperman M, Gefen A. A method of quantification of stress shielding in the proximal femur using hierarchical computational modeling. Comput Methods Biomech Biomed Engin 2006; 9:35-44. [PMID: 16880155 DOI: 10.1080/10255840600564959] [Citation(s) in RCA: 11] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/24/2022]
Abstract
Stress shielding is a biomechanical phenomenon causing adaptive changes in bone strength and stiffness around metallic implants, which potentially lead to implant loosening. Accordingly, there is a need for standard, objective engineering measures of the "stress shielding" performances of an implant that can be employed in the process of computer-aided implant design. To provide and test such measures, we developed hierarchical computational models of adaptation of the trabecular microarchitecture at different sites in the proximal femur, in response to insertion of orthopaedic screws and in response to hypothetical reductions in hip joint and gluteal muscle forces. By identifying similar bone adaptation outcomes from the two scenarios, we were able to quantify the stress shielding caused by screws in terms of analogous hypothetical reductions in hip joint and gluteal muscle forces. Specifically, we developed planar lattice models of trabecular microstructures at five regions of interest (ROI) in the proximal femur. The homeostatic and abnormal loading conditions for the lattices were determined from a finite element model of the femur at the continuum scale and fed to an iterative algorithm simulating the adaptation of each lattice to these loads. When screws were inserted to the femur model, maximal simulated bone loss (17% decrease in apparent density, 10% decrease in thickness of trabeculae) was at the greater trochanter and this effect was equivalent to the effect of 50% reduction in gluteal force and normal hip joint force. We conclude that stress shielding performances can be quantified for different screw designs using model-predicted hypothetical musculoskeletal load fractions that would cause a similar pattern and extent of bone loss to that caused by the implants.
Collapse
Affiliation(s)
- Michal Be'ery-Lipperman
- Department of Biomedical Engineering, Tel Aviv University, Faculty of Engineering, Tel Aviv 69978, Israel
| | | |
Collapse
|
10
|
Abstract
Progressive loosening of bone fixation screws is a well-documented phenomenon, induced by stress shielding and subsequent adaptive bone remodeling which results in bone loss around the screw. A set of two-dimensional computational (finite element) models was developed in order to test the effect of various engineering designs of fixation screws on the predicted screw-bone stress transfer, and consequently, on the biomechanical conditions for osteosynthesis. A dimensionless set of stress-transfer parameters (STP) was developed to quantify the screw-bone load sharing, enabling a convenient rating to be given of the biomechanical compatibility of practically any given screw design according to the nature of the simulated mechanical interaction. The results indicated that newly proposed screw designs, i.e. a "graded-stiffness" composite screw with a reduced-stiffness-titanium core and outer polymeric threads and an "active-compression" hollow screw which generates compressive stresses on the surrounding bone, are expected to provide significantly better biomechanical performances in terms of the STP criteria, compared with conservative screw designs. Accordingly, the present work demonstrates that finite element computer simulations can be used as a powerful tool for design and evaluation of bone screws, including geometrical features, material characteristics and even coatings.
Collapse
Affiliation(s)
- A Gefen
- Department of Biomedical Engineering, Faculty of Engineering, Tel Aviv University, Tel Aviv 69978, Israel.
| |
Collapse
|
11
|
Gefen A. Computational simulations of stress shielding and bone resorption around existing and computer-designed orthopaedic screws. Med Biol Eng Comput 2002; 40:311-22. [PMID: 12195978 DOI: 10.1007/bf02344213] [Citation(s) in RCA: 76] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
Abstract
Failure of an orthopaedic fixation due to stress shielding and consequent screw loosening is a major concern among surgeons: the loosened screws could not only interfere with the healing process but also endanger adjacent anatomical structures. In this study, the effect of the screw's engineering design (dimensions, profile shape and material properties) on the load sharing with adjacent bone and consequent bone resorption was tested, using a set of two-dimensional computational (finite element) models. An algorithm simulating local bone adaptation to strain energy density (SED) mechanical stimuli was developed and used to evaluate the biomechanical performances of different commercial screws. Two new designs, a 'graded-stiffness' composite screw, with a reduced-stiffness titanium core and outer polymeric threads, and an active-compression hollow screw that generates compressive stresses on the surrounding bone, were also evaluated. A dimensionless set of stress transfer parameters (STPs) were utilised for ranking the performances of the different screws according to the expected screw-bone load sharing and its evolution with adaptation of the surrounding tissue. The results indicated that commercial wide (6 mm thread diameter) trapezoidal and rectangular screw profiles have superior biomechanical compatibility with bone (i.e. predicted to be stable after 2 years). The graded-stiffness and active-compression screws provided the best biomechanical performances: bone loading around them was predicted to decrease by no more than 15% after 3 years, compared with a decrease of 55-70% in bone loading around commercially available screws. Computer simulations of bone adaptation around orthopaedic screws are demonstrated to be effective means for objective and quantitative evaluation of the biomechanical aspects of implant-tissue compatibility.
Collapse
Affiliation(s)
- A Gefen
- Department of Biomedical Engineering, Tel Aviv University, Tel Aviv, Israel.
| |
Collapse
|