Thermodynamic characteristics of solute—solvent interactions in liquid organic salt solvents, studied by gas chromatography

Separation of peptides by HPLC using a surface-confined ionic liquid stationary phase

A butylimidazolium bromide surface-confined ionic liquid stationary phase was synthesized in-house. The synthesized phase was investigated for the separation of five peptides (Gly-Tyr, Val-Tyr-Val, leucine enkephalin, methionine enkephalin, and angiotensin-II). The peptides were successfully separated in less than 5 min. The effect of trifluoroacetic acid (TFA) on the separation of peptides was evaluated with results confirming that TFA was not acting as ion-pairing agent in separation of peptides on this phase.

Utility of ionic liquids in analytical separations

Ionic liquids (ILs), as separation media, have made significant contributions in the past decades in advancing research in gas chromatography (GC), liquid chromatography (LC), and capillary electrophoresis (CE). This review, covering reports published from the mid 1980s to early 2007, shows how ILs have been used so far in separation science, originally primarily as GC stationary phases and later as mobile phase additives (both millimolar and major percent levels) for LC and CE. Representative GC and LC chromatograms as well as CE electropherograms are shown. In addition, the very recent findings on the development of ionic liquids with surfactant properties and its applications for chiral and achiral analysis are discussed.

Retention in overloaded columns, an experimental approach

Employing a micro-bore silica capillary coated with Carbowax 20 M, the dependence of chromatographic retention upon operative variables was studied surpassing the sample capacity of the column. Solution thermodynamics in the non-linear range of the absorption isotherm of n-alkanes on poly(ethylene oxide) were analyzed interpreting the experimental data through a retention equation deduced in a preceding theoretical work. At 120 degrees C, and pressures up to 11 bar abs, deviations from the ideal-gas behavior are found to be negligible, either for the fluid dynamics of the carrier-gas, or the thermodynamics of solution of the n-alkanes. Within the experimental error, for all practical purposes the mobile phase can be treated as an ideal gas. This constraint allows studying a solute molecule placed in an environment ranging from solvent monomers only, to a mixture of varying composition of solvent and solute, avoiding effects from significant interactions in the gas phase. In the experimental conditions explored, the absorption isotherm can be represented by taking only two-terms of its power series development.

Mobile phase effects on retention on a new butylimidazolium-based high-performance liquid chromatographic stationary phase

A new HPLC stationary phase based on n-butylimidazolium bromide has been characterized by a linear solvation energy relationship (LSER) approach in the binary acetonitrile/water mobile phases. The retention properties of the stationary phase were systematically evaluated in terms of intermolecular interactions between 28 test solutes and the stationary phase. The results and further comparisons with conventional reversed phase system confirm that retention properties are similar to phenyl phases in acetonitrile/water mixtures. The results obtained with acetonitrile/water mixtures are also compared with results obtained using methanol/water mixtures.

Retention characteristics of a new butylimidazolium-based stationary phase

A new HPLC stationary phase has been synthesized based on the ionic liquid n-butylimidazolium bromide. Imidazolium was covalently immobilized on a silica substrate through an n-alkyl tether and the retention characteristics of the resulting stationary phase were evaluated systematically. Using 28 small aromatic test solutes and reversed phase conditions, the linear solvation energy relationship approach was successfully used to characterize this new phase. The retention characteristics of the test solutes show remarkable similarity with phenyl stationary phases, despite the presence of a positive charge on the new imidazolium phase. Operated in the reversed phase mode, this new stationary phase shows considerable promise for the separation of neutral solutes and points to the potential for a truly multi-modal stationary phase.

Chromatographic and spectroscopic methods for the determination of solvent properties of room temperature ionic liquids

Room temperature ionic liquids are novel solvents with favorable environmental and technical features. Synthetic routes to over 200 room temperature ionic liquids are known but for most ionic liquids physicochemical data are generally lacking or incomplete. Chromatographic and spectroscopic methods afford suitable tools for the study of solvation properties under conditions that approximate infinite dilution. Gas-liquid chromatography is suitable for the determination of gas-liquid partition coefficients and activity coefficients as well as thermodynamic constants derived from either of these parameters and their variation with temperature. The solvation parameter model can be used to define the contribution from individual intermolecular interactions to the gas-liquid partition coefficient. Application of chemometric procedures to a large database of system constants for ionic liquids indicates their unique solvent properties: low cohesion for ionic liquids with weakly associated ions compared with non-ionic liquids of similar polarity; greater hydrogen-bond basicity than typical polar non-ionic solvents; and a range of dipolarity/polarizability that encompasses the same range as occupied by the most polar non-ionic liquids. These properties can be crudely related to ion structures but further work is required to develop a comprehensive approach for the design of ionic liquids for specific applications. Data for liquid-liquid partition coefficients is scarce by comparison with gas-liquid partition coefficients. Preliminary studies indicate the possibility of using the solvation parameter model for interpretation of liquid-liquid partition coefficients determined by shake-flask procedures as well as the feasibility of using liquid-liquid chromatography for the convenient and rapid determination of liquid-liquid partition coefficients. Spectroscopic measurements of solvatochromic and fluorescent probe molecules in room temperature ionic liquids provide insights into solvent intermolecular interactions although interpretation of the different and generally uncorrelated "polarity" scales is sometimes ambiguous. All evidence points to the ionic liquids as a unique class of polar solvents suitable for technical development. In terms of designer solvents, however, further work is needed to fill the gaps in our knowledge of the relationship between ion structures and physicochemical properties.

Application of capillary gas chromatography to studies on solvation thermodynamics

The potentiality of capillary gas chromatography (GC) as a means for research on solubility phenomena is focused. Basic thermodynamic information can be obtained in a simple and direct way from this technique relying on few parameters with their associated errors tightly controlled. An unexplored field of solvation phenomenology inaccessible to other techniques is revealed by the accuracy of capillary GC, provided that relevant chromatographic variables are utilized and an adequate treatment of the experimental information performed. The present article reviews different approaches for the attainment of basic thermodynamic information through capillary GC. Some traditional concepts on the treatment of chromatographic data for physicochemical measurement are questioned. Applications of the technique to research on solubility phenomena are depicted.

Effect of 1-alkyl-3-methylimidazolium-based ionic liquids as the eluent on the separation of ephedrines by liquid chromatography

The chromatographic behavior of ephedrines (norephedrine, ephedrine, pseudoephedrine and methylephedrine) on a C18 column was studied with different concentrations of 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquids as the eluent at pH 3.0. The addition of ionic liquid has great effects on the separation of these basic compounds: decreasing band tailing, reducing band broadening, and improving resolution. The retention times of the analytes increase at first and then decrease with the increase in the concentration of ionic liquid. This effect may be attributed to the competition between imidazolium cations and the polar groups of the analytes for the silanol group on the alkylsilica surface, and also to the formation of weak bilayer electronic structure on the C18 column. Several ionic liquids with different alkyl substituents on the imidazolium cations or with different counterions as the eluents were compared.

Selectivity equivalence of poly(ethylene glycol) stationary phases for gas chromatography

The solvation parameter model is used to study differences in selectivity for poly(ethylene glycol) stationary phases for packed column (Carbowax 20M) and fused-silica, open-tubular column (HP-20M, AT-Wax, HP-INNOWax and DB-FFAP) gas chromatography. All phases are dipolar, strongly hydrogen-bond basic with no hydrogen-bond acidity and of moderate cohesion. No two phases are exactly alike, however, and selectivity differences identified with cavity formation and dispersion interactions, n- and pi-electron pair interactions, dipole-type interactions and hydrogen-bond interactions are quantified by differences in the system constants at a fixed temperature where retention occurs solely by gas-liquid partitioning. The system constants vary linearly with temperature over the range 60-140 degrees C (except for n- and pi-electron pair interactions which are temperature invariant) facilitating a general comparison of the importance of temperature on selectivity differences for compared phases. From a mechanistic point of view it is demonstrated that selectivity differences can result from chemical differences between the poly(ethylene glycol) stationary phases and from differences in the relative contribution of interfacial adsorption to the retention mechanism. The latter depends on both system properties and solute characteristics.