Collection in analytical-scale supercritical fluid extraction

Facilitated on-line supercritical fluid extraction - supercritical fluid chromatography for nonpolar and polar compounds from milk thistle seeds

Plant seeds, as those from milk thistle (Silybum marianum), are a valuable source of nonpolar and polar compounds with potentially interesting biological activity. The main nonpolar compounds are triglycerides, which are also the main components of all vegetable oils. In addition, specific polar compounds - flavonolignans, called silymarin, have been found in large amounts in milk thistle seeds extract. These flavonoids derivatives have different biological activity, for instance hepatoprotective effects. In order to extract and analyze both nonpolar (triglycerides) and polar compounds (flavonolignans) from milk thistle seeds through a sequential methodology, an on-line supercritical fluid extraction - supercritical fluid chromatography (SFE-SFC) method was developed. Different ways of transferring the extracts from SFE to SFC (i.e. direct on-column transfer and loop transfer) were compared, and particularly for their effect on chromatographic quality. In this respect, nonpolar and polar compounds caused different issues, especially as polar compounds required a significant portion of co-solvent in the extraction step, favoring early elution in the chromatographic column. First, on-line SFE-SFC was used for triglycerides analysis and allowed the comparison of transfer modes. Then, on-line kinetics were performed to measure defatting time before polar molecules extraction. Finally, the eventual benefit of loop transfer was also investigated for the analysis of flavonolignans, polar molecules whose analysis can be difficult by on-line SFE-SFC. The aim of this paper is to discuss the versatility of on-line SFE-SFC and how challenging the coupling can be, especially when both non-polar and polar molecules must be analyzed independently in a single sample.

Challenges in sample preparation for swellable core technology tablets: Approaches for the removal of polyethylene oxide and optimization of API recovery

Swellable Core Technology (SCT) tablets, a solid oral dosage formulation designed for the controlled release of Active Pharmaceutical Ingredient (API), are made up of two distinct layers; an active layer containing the active ingredient (10-30%wt) and up to 90%wt polyethylene oxide (PEO); and a sweller layer which contains up to 65%wt PEO. The objective of this study was to develop a process to remove PEO from analytical test solutions and optimize API recovery using physicochemical properties of the API. Quantitation of PEO was performed by liquid chromatography (LC) using an evaporative light scattering detector (ELSD). This was used to build an understanding of removal of PEO using solid-phase extraction and liquid-liquid extraction techniques. A workflow was proposed to allow efficient development of analytical methods for SCT tablets with optimized sample clean-up.

Validation of an Analytical Method for Simultaneous Determination of 18 Persistent Organic Pollutants in Trout Using LLE Extraction and GC-MS/MS

Persistent organic pollutants, (POPs), are vast distributed compounds in environment which are recognized as one of the global pollution problems. These groups of materials being dangerous due to their high stability are accumulated in animal tissues and occurring in the food chain. One of the major paths through which persistent organic combinations access to human body is consuming polluted foods, particularly, fishes. Among aquatic animals, trout as one of the mostly consumed fishes in Tehran’s food basket was studied. In this study, two categories of persistent organic pollutants: Organochlorine pesticides (OCPs) including HCB, Dieldrin, Methoxychlor, α-, ϒ-Chlordane, α-, β-Endosulfan and o,p’-DDE, p,p’-DDE, o,p’-DDT, p,p’-DDT and the second group Polychlonitated biphenyls (PCBs) including seven PCB congeners which are called indicator PCBs (IUPAC nos.: 28,52,101,118,138,153 and 180) were determined in trout by GC-MS/MS in MRM monitoring mode and LLE extraction. The average recoveries of OCPs and PCBs at five concentration levels (1, 2, 5, 10 and 20 ng/g for PCBs and 5 times for OCPs) were in the range of 73-112%. The relative standard deviations of POPs in fish were in the range of 1.4-17.9% for all of the concentration levels. The limit of detections (LODs) and the limit of quantitations (LOQs) were between 0.6-8.3 and 2-25 µg/kg, respectively. The results indicated the presence of organochlorine pesticides in trout and the levels of p,p’-DDE and p,p’-DDT were within the range of < LOQ -12.83 and < LOQ -10.2 ng/g ww (wet weight), respectively. According to the results, OCPs residues were lower than maximum residue levels set by European Council Directives.

Supercritical Fluid Extraction of Pesticides and Insecticides from Food Samples and Plant Materials

The principal intention of this study is presenting the attempts carried out for extracting, separating, and determining of the pesticide and insecticide residues existing in food and plant samples. In this regard, a set of content, including the explanations about the supercritical fluid extraction (SFE), supercritical fluid chromatography, and various types of pesticides are indicated. Besides, the parameters affecting the pesticides extraction composed of temperature, pressure, modifier, drying agent, and so on are discussed. Also, examples of insecticides extraction by SFE technique as an important subset of pesticides are indicated. Along with these items, some interesting works, concerning the innovations implemented in the field of SFE of pesticide and insecticide residues from foodstuff and plants are depicted.

Selective pressurized hot water extraction of nutritious macro-nutrients vs. micro-nutrients in Moringa oleifera leaves-a chemometric approach

Moringa oleifera leaves are widely used in traditional medicine as a food supplement because they are high in essential and nutritious content. Pressurized hot water extraction (PHWE), which is a green approach, was used for the recovery of the macro-nutrient and micro-nutrient elements from dried leaf powder of Moringa oleifera. In this study, response surface methodology was applied to assess the influence of temperature (50-200 °C) and time (5-60 min) on the extractability pattern of macro-nutrient and micro-nutrient elements from the leaves of Moringa oleifera when processed by PHWE. The quantification of macro-nutrient elements such as Ca, K and Mg and micro-nutrient elements like Al, Co, Cr, Cu, Fe, Ni and Zn from the leaves was determined using inductively coupled plasma optical emission spectroscopy (ICP-OES). Obtained results revealed that the extraction of macro-nutrient elements from the Moringa oleifera leaves was enhanced by increasing the extraction time more than the extraction temperature. On the contrary, the amounts of extractable micro-nutrient elements were increased by increasing the extraction temperature. Hence, the recovery for macro-nutrient elements ranged from 88 to 98% while for micro-nutrients it ranged from 21 to 46%. This implies that macro-nutrient elements are extracted with relatively high selectivity in relation to micro-nutrient elements in Moringa dried leaf powder using the PHWE technique.

Application of supercritical fluids in cholesterol extraction from foodstuffs: a review

Various innovations have so far been devised to extract cholesterol from foods. Achieving a supercritical fluid is perhaps one of the greatest human successes in the field of extraction from foodstuffs in last 2 decades. Supercritical fluid extraction (SFE) offers a rapid, environment-friendly and selective method for extracting cholesterol from foods. This review aims at investigating the application of supercritical fluids in extraction of cholesterol. Various factors affecting the SFE, collection systems, examples of cholesterol extraction and SFE benefits are some of the issues discussed in this study.

Valorisation of softwood bark through extraction of utilizable chemicals. A review

Softwood bark is an important source for producing chemicals and materials as well as bioenergy. Extraction is regarded as a key technology for obtaining chemicals in general, and valorizing bark as a source of such chemicals in particular. In this paper, properties of 237 compounds identified in various studies dealing with extraction of softwood bark were described. Finally, some challenges and perspectives on the production of chemicals from bark are discussed.

Use of on-line supercritical fluid extraction-supercritical fluid chromatography/tandem mass spectrometry to analyze disease biomarkers in dried serum spots compared with serum analysis using liquid chromatography/tandem mass spectrometry

RATIONALE

The analytical stability and throughput of biomarker assays based on dried serum spots (DSS) are strongly dependent on the extraction process and determination method. In the present study, an on-line system based on supercritical fluid extraction-supercritical fluid chromatography coupled with tandem mass spectrometry (SFE-SFC/MS/MS) was established for analyzing the levels of disease biomarkers in DSS.

METHODS

The chromatographic conditions were investigated using the ODS-EP, diol, and SIL-100A columns. Then, we optimized the SFE-SFC/MS/MS method using the diol column, focusing on candidate biomarkers of oral, colorectal, and pancreatic cancer that were identified using liquid chromatography (LC)/MS/MS.

RESULTS

By using this system, four hydrophilic metabolites and 17 hydrophobic metabolites were simultaneously detected within 15 min. In an experiment involving clinical samples, PC 16:0-18:2/16:1-18:1 exhibited 93.8% sensitivity and 64.3% specificity, whereas PC 17:1-18:1/17:0-18:2 showed 81.3% sensitivity and 92.9% specificity for detecting oral cancer. In addition, assessments of the creatine levels demonstrated 92.3% sensitivity and 78.6% specificity for detecting colorectal cancer.

CONCLUSIONS

The results of this study indicate that our method has great potential for clinical diagnosis and would be suitable for large-scale screening. Copyright © 2017 John Wiley & Sons, Ltd.

Supercritical Algal Extracts: A Source of Biologically Active Compounds from Nature

The paper discusses the potential applicability of the process of supercritical fluid extraction (SFE) in the production of algal extracts with the consideration of the process conditions and yields. State of the art in the research on solvent-free isolation of biologically active compounds from the biomass of algae was presented. Various aspects related with the properties of useful compounds found in cells of microalgae and macroalgae were discussed, including their potential applications as the natural components of plant protection products (biostimulants and bioregulators), dietary feed and food supplements, and pharmaceuticals. Analytical methods of determination of the natural compounds derived from algae were discussed. Algal extracts produced by SFE process enable obtaining a solvent-free concentrate of biologically active compounds; however, detailed economic analysis, as well as elaboration of products standardization procedures, is required in order to implement the products in the market.

Bioassay-guided supercritical fluid extraction of cyclooxygenase-2 inhibiting substances in Plantago major L

INTRODUCTION

Selective extraction of plant materials is advantageous for obtaining extracts enriched with desired constituents, thereby reducing the need for subsequent chromatography purification. Such compounds include three cyclooxygenase-2 (COX-2) inhibitory substances in Plantago major L. targeted in this investigation: α-linolenic acid (α-LNA) (18:3 ω-3) and the triterpenic acids ursolic acid and oleanolic acid.

OBJECTIVE

To investigate the scope for tuning the selectivity of supercritical fluid extraction (SFE) using bioassay guidance, and Soxhlet extraction with dichloromethane as solvent as a reference technique, to optimise yields of these substances.

METHOD

Extraction parameters were varied to optimise extracts' COX-2/COX-1 inhibitory effect ratios. The crude extracts were purified initially using a solid phase extraction (SPE) clean-up procedure and the target compounds were identified with GC-MS, LC-ESI-MS and LC-ESI-MS² using GC-FID for quantification.

RESULTS

α-LNA was preferentially extracted in dynamic mode using unmodified carbon dioxide at 40°C and 172 bar, at a 0.04% (w/w) yield with a COX-2/COX-1 inhibitory effect ratio of 1.5. Ursolic and oleanolic acids were dynamically extracted at 0.25% and 0.06% yields, respectively, with no traces of (α-LNA) and a COX-2/COX-1-inhibitory effect ratio of 1.1 using 10% (v/v) ethanol as polar modifier at 75°C and 483 bar. The Soxhlet extracts had ursolic acid, oleanolic acid and αLNA yields up to 1.36%, 0.34% and 0.15%, respectively, with a COX-2/COX-1 inhibitory effect ratio of 1.2.

CONCLUSION

The target substances can be extracted selectively by bioassay guided optimisation of SFE conditions.

Theoretical models for supercritical fluid extraction

For the proper design of supercritical fluid extraction processes, it is essential to have a sound knowledge of the mass transfer mechanism of the extraction process and the appropriate mathematical representation. In this paper, the advances and applications of kinetic models for describing supercritical fluid extraction from various solid matrices have been presented. The theoretical models overviewed here include the hot ball diffusion, broken and intact cell, shrinking core and some relatively simple models. Mathematical representations of these models have been in detail interpreted as well as their assumptions, parameter identifications and application examples. Extraction process of the analyte solute from the solid matrix by means of supercritical fluid includes the dissolution of the analyte from the solid, the analyte diffusion in the matrix and its transport to the bulk supercritical fluid. Mechanisms involved in a mass transfer model are discussed in terms of external mass transfer resistance, internal mass transfer resistance, solute-solid interactions and axial dispersion. The correlations of the external mass transfer coefficient and axial dispersion coefficient with certain dimensionless numbers are also discussed. Among these models, the broken and intact cell model seems to be the most relevant mathematical model as it is able to provide realistic description of the plant material structure for better understanding the mass-transfer kinetics and thus it has been widely employed for modeling supercritical fluid extraction of natural matters.

Green Sample Preparation Methods

Sample preparation is the stage of the analytical process where greenness-related issues can likely play the most important role. With the exception of direct methods for solid sample analysis, for most analytical methods it is necessary to carry out a certain number of operations to make the sample amenable to the instrument. These operations, which may include digestion, extraction, dissolution, preconcentration and clean-up, typically require the use of large amounts of acids, organic solvents, and in general, chemicals that can often be persistent, bioaccumulative and toxic (PBT) as well as operating conditions that can become unsafe and energy-consuming. Therefore, sample preparation stages should be targeted as a priority when green chemistry principles are to be adapted to analytical activities. This chapter is devoted to the discussion of most relevant sample preparation strategies that approach the fulfilment of the green chemistry principles. Thus, digestion and extraction strategies from solid samples for both inorganic and organic analysis are approached using microwaves and ultrasound, followed by a discussion of modern extraction techniques, such as microwave-assisted extraction, supercritical fluid extraction, pressurized liquid extraction and solid-phase extraction for trace organic analysis. Microextraction techniques also deserve a place here, since a high degree of greenness is achieved when they are implemented in analytical methodology. Finally, application of surfactants in techniques such as cloud point extraction or membranes that allow minimizing the use of organic solvents for analysis of liquid samples are discussed.

Bioanalytical applications using supercritical fluid techniques

The bioanalytical applications of supercritical fluid techniques, such as supercritical fluid extraction (SFE) and supercritical fluid chromatography (SFC), are of increasing interest. The main role of these techniques is in the sample preparation and separation of biologically active compounds, particularly drugs and their metabolites, as well as endogenous compounds. An insight is given into the different types of extracting fluids and modifiers, detectors, stationary phases, mobile phases and collection strategies. A critical discussion is presented on the existing state of the art concerning the applications of SFC and SFE with a specific focus on its advantages and limitations in the bioanalytical field. New developments and the possibilities for routine work in the near future are also covered.

Supercritical fluid extraction of macrocyclic lactone mycotoxins in maize flour samples for rapid amperometric screening and alternative liquid chromatographic method for confirmation

A rapid and simple method for the direct screening of macrocyclic lactone mycotoxins (zearalenone, ZON; alpha-zearalenol, alpha-ZOL; and beta-zearalenol, beta-ZOL) in maize flour samples is proposed. The sample screening method comprises supercritical fluid extraction (SFE) and clean-up on Florisil adsorption cartridge of the selected toxic compounds, followed by continuous flow electrochemical detection. Those samples for which the total concentration is close to or above the threshold limit established by legislation (0.200 mg kg(-1)) are subjected to preconcentration on C18 chromatographic material and liquid chromatographic separation for confirmation purposes. This confirmation method allows the determination of ZON, alpha-ZOL and beta-ZOL in the range between 30 and 300 microg kg(-1), with a average relative standard deviation lower than 5.2 in all cases.

Methods of sample preparation for determination of pesticide residues in food matrices by chromatography-mass spectrometry-based techniques: a review

Much progress has been made in pesticide analysis over the past decade, during which time hyphenated techniques involving highly efficient separation and sensitive detection have become the techniques of choice. Among these, methods based on chromatographic separation with mass spectrometric detection have resulted in greater likelihood of identification and are acknowledged to be extremely useful and authoritative methods for determination of pesticide residues. Even with such powerful instrumental techniques, however, the risk of interference increases with the complexity of the matrix studied, so sample preparation before instrumental analysis is still mandatory in many applications, for example food analysis. This article summarizes the analytical characteristics of the different methods of sample-preparation for determination of pesticide residues in a variety of food matrices, and surveys their recent applications in combination with chromatographic mass spectrometric analysis. We discuss the advantages and the disadvantages of the different methods, address instrumental aspects, and summarize conclusions and perspectives for the future.

Optimization and comparison of three methods for extraction of volatile compounds from Cyperus rotundus evaluated by gas chromatography–mass spectrometry

The essential oil of Cyperus rotundus has multiple pharmacological activities. Therefore, the extraction with high yield and quality is very important for preparation of essential oil of C. rotundus. In this paper, three methods, namely hydrodistillation (HD), pressurized liquid extraction (PLE) and supercritical fluid extraction (SFE), for extraction of volatile compounds from C. rotundus were optimized and compared by gas chromatography-mass spectrometry. Among eight identified compounds in C. rotundus, five components including alpha-copaene, cyperene, beta-selinene, beta-cyperone and alpha-cyperone were quantitatively determined or estimated using alpha-cyperone as standard, which showed that PLE had the highest extraction efficiency, while SFE had the best selectivity for extraction of beta-cyperone and alpha-cyperone. The contents of ingredients from C. rotundus extracted with HD, PLE and SFE are significantly different, which suggest that comparison of chemical components and pharmacological activities of different extracts is helpful to elucidate the active components in C. rotundus and control its quality.

Development of new cleanup method of polychlorinated dibenzo-p-dioxins/dibenzofurans in fish by freezing-lipid filtration

Freezing-lipid filtration as a new method has been developed for the rapid determination of polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/Fs) in biological samples. This method can effectively reduce the time of sample pretreatment, labor and amount of solvents compared with conventional methods. By freezing-lipid filtration procedure, about 90% of lipids in extract could be removed without any significant loss of PCDD/Fs. For further cleanup of extracts after freezing-lipid filtration, automatic parallel LC columns including silica gel, alumina and carbon columns were applied. During automatic parallel LC columns cleanup, most of co-extracted interferences such as residue lipids and fatty acids could be eliminated and dioxins could be separated from many other dioxin-like congeners such as polychlorinated biphenyls by this procedure. The extracts after cleanup were analyzed by high-resolution gas chromatography (HRGC)/high-resolution mass spectrometry (HRMS) using an isotope dilution method. The average recoveries and relative standard deviation (R.S.D.) of 17 native congeners in the spiked fish samples at 8-80 pg/g (n=3) were ranged between 85.3 and 117.2% and 5.7-20.3%, respectively.

Rapid screening of dioxin-contaminated soil by accelerated solvent extraction/purification followed by immunochemical detection

Since soils at industrial sites might be heavily contaminated with polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs), there is a need for large-scale soil pollution surveys and, thus, for cost-efficient, high-throughput dioxin analyses. However, trace analysis of dioxins in complex matrices requires exhaustive extraction, extensive cleanup, and very sensitive detection methods. Traditionally, this has involved the use of Soxhlet extraction and multistep column cleanup, followed by gas chromatography-high-resolution mass spectrometry (GC/HRMS), but bioanalytical techniques may allow much more rapid, cost-effective screening. The study presented here explores the possibility of replacing the conventional method with a novel approach based on simultaneous accelerated solvent extraction (ASE) and purification, followed by an enzyme-linked immunosorbent assay (ELISA). Both the traditional and the novel cleanup and detection approaches were applied to contaminated soil samples, and the results were compared. ELISA and GC/HRMS results for Soxhlet-extracted samples were linearly correlated, although the ELISA method slightly underestimated the dioxin levels. To avoid an unacceptable rate of false-negative results, the use of a safety factor is recommended. It was also noted that the relative abundance of the PCDDs/PCDFs, evaluated by principal component analysis, had an impact on the ELISA performance. To minimize this effect, the results may be corrected for differences between the ELISA cross-reactivities and the corresponding toxic equivalency factor values. Finally, the GC/HRMS and ELISA results obtained following the two sample preparation methods agreed well; and the ELISA and GC/HRMS results for ASE extracts were strongly correlated (correlation coefficient, 0.90). Hence, the ASE procedure combined with ELISA analysis appears to be an efficient approach for high-throughput screening of PCDD-/PCDF-contaminated soil samples.

Supercritical CO2 extraction and purification of compounds with antioxidant activity

Supercritical fluid extraction (SCFE), based on the utilization of a fluid under supercritical conditions, is a technology suitable for extraction and purification of a variety of compounds, particularly those that have low volatility and/or are susceptible to thermal degradation. The interest in SCFE is promoted by legal limitations of conventional solvents for food and pharmaceutical uses. The physicochemical properties of supercritical CO2 (higher diffusivity, lower viscosity, and lower surface tension than conventional solvents) facilitate mass transfer and allow an environmentally friendly operation. This article presents a comprehensive compilation of data on the supercritical CO2 extraction of antioxidant compounds from vegetal materials, with particular attention to those of a phenolic nature. Aspects concerning the supercritical operation for extraction and fractionation of antioxidants compounds are considered, including equilibrium solubility of pure compounds and effects of the operational conditions on the antioxidant activity of isolated fractions. The data are compared to those reported for synthetic antioxidants and natural extracts obtained by conventional solvent extraction from vegetal matrices.

Comprehensive comparison of classic Soxhlet extraction with Soxtec extraction, ultrasonication extraction, supercritical fluid extraction, microwave assisted extraction and accelerated solvent extraction for the determination of polychlorinated biphenyls in soil

This paper compares the extraction effectiveness of six different commonly applied extraction techniques for the determination of PCBs in soil. The techniques included are Soxhlet, Soxtec, ultrasonication extraction, supercritical fluid extraction, microwave-assisted extraction and accelerated solvent extraction. For none of the techniques were the extraction conditions optimized, but instead the extraction parameters were based on the experience from previous successful investigation published by a number of research groups worldwide. In general, all extraction techniques were capable of producing accurate data for one native PCB contaminated soil diluted with another soil sample to obtain two concentration levels. It could therefore be concluded that any of the investigated techniques can be used with success if the extraction conditions applied are chosen wisely.

Monitoring dioxins in food and feedstuffs using accelerated solvent extraction with a novel integrated carbon fractionation cell in combination with a CAFLUX bioassay

The concentrations of dioxins in fish oil and fish meal were determined with accelerated solvent extraction, using a novel integrated carbon fractionation extraction cell followed by a miniturized multilayer silica column and bioanalysis on a recently-developed chemically-activated fluorescent gene expression cell bioassay. The developed method allows for simultaneous gravimetric lipid weight determination, which was shown for both matrices under study (about 100% lipid recovery of each sample). Initial results practically meet the quality criteria on screening methods for control of dioxins in food and feedstuffs laid down in the EU Commission Directives 2002/69/EC (food) and 2002/70/EC (feed). This demonstrates that the developed method can be used as a screening tool for monitoring dioxins in food and feed after some additional improvements and testing on a greater number of matrices.

Multiresidue analysis of pesticides in soil by supercritical fluid extraction/gas chromatography with electron-capture detection and confirmation by gas chromatography-mass spectrometry

The applicability of supercritical fluid extraction (SFE) in pesticide multiresidue analysis (organohalogen, organonitrogen, organophosphorus, and pyrethroid) in soil samples was investigated. Fortification experiments were conducted to test the conventional extraction (solid-liquid) and to optimize the extraction procedure in SFE by varying the CO2 modifier, temperature, extraction time, and pressure. The best efficiency was achieved at 400 bar using methanol as modifier at 60 degrees C. For the SFE method, C-18 cartridges were used for the cleanup. The analytical screening was performed by gas chromatography equipped with electron-capture detection (ECD). Recoveries for the majority of pesticides from spiked samples of soil at different residence times were 1, 20, and 40 days at the fortification level of 0.04-0.10 mg/kg ranging from 70 to 97% for both methods. The detection limits found were <0.01 mg/kg for ECD, and the confirmation of pesticide identity was performed by gas chromatography-mass spectrometry in a selected-ion monitoring mode. Multiresidue methods were applied in real soil samples, and the results of the methods developed were compared.

Quantitative analysis of imazamox herbicide in environmental water samples by capillary electrophoresis electrospray ionization mass spectrometry

Capillary electrophoresis-mass spectrometry (CE-MS) with an electrospray ionization interface was applied for the quantitative analysis of imazamox pesticide in well water, potable water, and pond water. The detector response for imazamox was determined to be linear over the concentration range of 50-1 ng/ml. The limits of quantitation and detection of the method were determined to be 200 and 20 ng/l for imazamox compound in each type of water sample, respectively. The total sample preparation and CE-MS analysis time was under 2 h.

Identification of organic compounds in atmospheric aerosol particles by on-line supercritical fluid extraction–liquid chromatography–gas chromatography–mass spectrometry

Atmospheric particles were collected with a high-volume sampling system at an urban site in Helsinki (Finland). The samples were analysed by on-line coupled supercritical fluid extraction-liquid chromatography-gas chromatography-mass spectrometry (SFE-LC-GC-MS). The aerosol sample was first extracted by SFE. The extract was then transferred to a liquid chromatograph where it was fractionated into four fractions according to polarity. Each fraction from the liquid chromatograph was transferred to a gas chromatograph by large-volume injection, where final separation was carried out. The first LC fraction (280 microl) contained nonpolar compounds, such as n-alkanes, hopanes and steranes. The second fraction (840 microl) included polycyclic aromatic hydrocarbons (PAHs) and alkyl-PAHs, while the third and fourth fractions (840 microl each) contained more polar compounds, such as n-alkan-2-ones, n-alkanals, oxy-PAHs and quinones.

Recent applications of sample preparation techniques in food analysis

Even with the emergence of advanced techniques of separation and identification, it is rarely possible to analyse food without manipulation. The traditional techniques for sample preparation are time consuming and require large amount of reagents, which are expensive, generate considerable waste, contaminate the sample and can enrich it for analytes. The more analytical techniques have become highly developed, the more has sample clean-up become important in order to fully take advantage of them. Due to the multiplicity of food matrices, it is not possible to use one sample preparation technique, so many methods have been proposed for meeting all the requirements. The newest variations of wet digestion, solvent and sorbent extraction and membrane separation are summarised and their most recent applications to food analysis are provided.