Elevated-temperature ultrahigh-pressure liquid chromatography using very small polybutadiene-coated nonporous zirconia particles

Evaluation of analytical columns suitable for high-temperature liquid-chromatography-isotope-ratio-mass-spectrometry analysis of anabolic steroids

Isotope ratio mass spectrometry (IRMS) can be used to determine the carbon isotope ratio of anabolic steroids. For example, in sports doping and food safety control, it enables determining an endogenous or synthetic origin of anabolic steroids. Generally, the steroids of interest are purified by liquid chromatography (LC) and analysed by gas chromatography combustion IRMS. LC-IRMS is not used since only mobile phases without carbon atoms can be used. For analysing mid-to apolar compounds, heated water can be used as an eluent as it has a similar polarity to a weak polar organic solvent. The silica-based columns are not robust enough at elevated temperatures in aqueous conditions. However, modified silica particles, metal oxides coated with polymers, and porous graphitic carbon are promising column materials for high-temperature LC (HT-LC) applications. Here, the stability of the stationary phase is crucial, and their chromatographic performance needs to be evaluated under the conditions mentioned above for anabolic steroid separations. Six columns using temperatures up to 200 °C were assessed, and only two were found to be appropriate. The ZirChrom-PBD column can be used for HT-LC-IRMS research purposes but is not recommended for routine laboratory practice applications due to the substantial loss of retention and resolution over time at elevated temperatures. Sachtopore-RP columns are the only suitable option for routine HT-LC-IRMS applications, even though they suffer from peak broadening over time when operating at elevated temperatures.

Liquid chromatography above 20,000 PSI

Continued improvements in HPLC have led to faster and more efficient separations than previously possible. One important aspect of these improvements has been the increase in instrument operating pressure and the advent of ultrahigh pressure LC (UHPLC). Commercial instrumentation is now capable of up to ~20 kpsi, allowing fast and efficient separations with 5-15 cm columns packed with sub-2 μm particles. Home-built instruments have demonstrated the benefits of even further increases in instrument pressure. The focus of this review is on recent advancements and applications in liquid chromatography above 20 kpsi. We outline the theory and advantages of higher pressure and discuss instrument hardware and design capable of withstanding 20 kpsi or greater. We also overview column packing procedures and stationary phase considerations for HPLC above 20 kpsi, and lastly highlight a few recent applicatioob pressure instruments for the analysis of complex mixtures.

The characterization of column heating effect in nanoflow liquid chromatography mass spectrometry (nanoLC-MS)-based proteomics

Column heating strategy is often applied in nano-high-performance liquid chromatography-mass spectrometer (nanoHPLC-MS) platform for enhancing the analytical efficiency of peptides or proteins. Nonetheless, the influence effects of column heating in peptides or proteins identification still lack of deep understanding. In this study, a systematic comparison of room temperature (RT) and column heating of nanoHPLC was done. Based on the data, under column heating condition, the backpressure of nanoHPLC can be decreased. Due to the increase of resolution, the peak widths of precursor ion were narrowed. As a result, in MS/MS data acquisition part, more time was spared for MS1 detecting and MS2 fragmenting, which eventually resulted in increased identification of peptides and proteins. Moreover, we also proposed the application scope of column heating by evaluating its influence on sample detection. On one hand, column heating significantly increased the identification of membrane proteins due to more efficient elution of highly hydrophobic peptides compared with RT. On the other hand, heating was not suitable for analyzing short or/and hydrophilic peptides with low retention time, which would be eluted out during sample loading process under high temperature and missed by mass spectrometric detection. In conclusion, our study provides a reference for rational application of column heating in proteomics research.

Sub-2 μm fully porous and partially porous (core–shell) stationary phases for reversed phase liquid chromatography

The need for increased throughput and superior performance has increased the demand for stationary phases with improved kinetic performance.

Capillary liquid chromatography at ultrahigh pressures

Ultrahigh-pressure liquid chromatography (UHPLC) is a method of liquid chromatography utilizing sub-2-microm particles packed into capillary columns 25 to 100 cm long. Columns of this length packed with particles this fine require operation with pressures from 1,000 to 7,000 bar (15,000 to 100,000 psi). The advantages of this technique are high separation powers (theoretical plate counts from 100,000 to 300,000) and run times from a few minutes (isocratic) to a few hours (long gradients). This review discusses the background and theoretical basis of UHPLC, practical aspects of UHPLC hardware, examples of separations, future areas for research in UHPLC, and techniques that are both competitive with and complementary to UHPLC.

High-speed gradient elution reversed-phase liquid chromatography of bases in buffered eluents. Part I. Retention repeatability and column re-equilibration

We studied the run-to-run repeatability of the retention times of both non-ionizable and basic compounds chromatographed using buffered eluents. The effect of flow rate, organic modifier and other additives, buffer type/concentration, stationary phase type, batch-to-batch preparation of the initial eluent, gradient time, sample type and intra-day changes on retention repeatability were examined. We also assessed the effect of column storage solvent conditions on the inter-day repeatability. Although retention repeatability is strongly influenced by many parameters (flow rate, solvent compressibility compensation, precision of temperature control, and buffer/stationary phase type), our primary finding is that with a reasonable size column (15cmx4.6mm (i.d.)) two column volumes of re-equilibration with initial eluent suffices to provide acceptable repeatability (no worse than 0.004min) for both non-ionizable and basic analytes under a wide variety of conditions. Under ideal conditions (e.g. the right buffer, flow rate, etc.) it is possible to obtain truly extraordinary repeatability often as good as 0.0004min. These absolute fluctuations in retention translate to worst case changes in resolution of 0.2 units and average changes of only 0.02 units.

High throughput liquid chromatography with sub-2μm particles at high pressure and high temperature

In this study, ultra performance liquid chromatography (UPLC) using pressures up to 1,000 bar and columns packed with sub-2 microm particles has been combined with high temperature mobile phase conditions (up to 90 degrees C). By using high temperature ultra performance liquid chromatography (HT-UPLC), it is possible to drastically decrease the analysis time without loss in efficiency. The stability and chromatographic behavior of sub-2 microm particles were evaluated at high temperature and high pressure. The chromatographic support remained stable after 500 injections (equivalent to 7,500 column volumes) and plate height curves demonstrated the capability of HT-UPLC to obtain fast separations. For example, a separation of nine doping agents was performed in less than 1 min with sub-2 microm particles at 90 degrees C. Furthermore, a shorter column (30 mm length) was used and allowed a separation of eight pharmaceutical compounds in only 40s.

Fundamental and practical aspects of ultrahigh pressure liquid chromatography for fast separations

The ongoing development of HPLC has been focused on increasing the speed and efficiency of separations over the past decade. The advances in separation speed have been primarily related to the development of column technology and instrumentation. Relatively short columns packed with sub-2 microm particles provide high-speed separations while maintaining or increasing resolution. Ultrahigh pressure pump systems have been developed to overcome the high-pressure drop generated by such sub-2 microm packings. In this review, fundamental and practical aspects of ultrahigh pressure or ultrahigh performance liquid chromatography (U-HPLC) are discussed. Applications of fast U-HPLC separations are also presented.

Superheated water as chromatographic eluent for parabens separation on octadecyl coated zirconia stationary phase

In this study, the use of pure water at superheated temperatures, between 100 and 200 degrees C, as a mobile phase for RP separation is explored. Instrumental parameters, such as temperature, flow rate, preheating and cooling, have shown significant effects on the quality of the chromatographic peaks. The properties of superheated water as an eluent were investigated by observing the chromatographic behaviour of four parabens on a carbon-clad zirconia (ZR) phase with covalently bonded octadecyl groups. Results were compared with those obtained at 30 degrees C on a silica-based phase with octadecyl groups, using water and ACN as mobile phase. The optimized method was finally applied to analyse parabens in a commercial body cream.

High-temperature micro liquid chromatography for lipid molecular species analysis with evaporative light scattering detection

The need for a rapid and sensitive chromatographic technique for analyzing lipid molecular species, has led to the development of an high-temperature micro liquid chromatographic system (HTLC) coupled to an evaporative light scattering detector. The increased diffusion coefficients and reduced viscosity at higher temperatures allowed lipids to be analyzed rapidly with solvents differing from those classically used in lipids chemistry. Hypercarb, a reverse phase material, was used for its different properties including heat resistance in high temperature micro HPLC. We have investigated the temperature effect on kinetic performances in HTLC, established pure solvents eluent strength at high temperature and studied different classes of lipids with seven pure solvents. We found that it was possible to use alcohols solvents in the mobile phase to elute lipids without the use of chlorinated solvents. A quick and simple method was developed to analyze a complex lipid simple, ceramide type III and type IV.

Unusual retention behaviour of 4-substituted piperidines on polybutadiene and polystyrene coated zirconia by comparison to reverse phase silica

The retention properties of a range of N-methylated and N-des-methyl 4-substituted piperidines on polybutadiene (PBD) and polystyrene (PS) coated zirconia have been studied and compared to those of Xterra RP(18) and Genesis C(18) silica. The effect of buffer type and pH are investigated with regard to the elution order on all three stationary phases. The change in the elution order is linked to the degree of substitution of the piperidine nitrogen and appears to be independent of the rest of the structure, indicating that this moiety is most heavily involved in the separation mechanism on the zirconia phases.

Ultra-performance liquid chromatography–tandem mass spectrometry: A novel challenge in multiresidue pesticide analysis in food

Potential of ultra-performance liquid chromatography (UPLC) separation strategy coupled with tandem (in space) mass spectrometric detection (MS/MS) in multiresidue pesticide analysis was critically assessed. Performance parameters such as number of theoretical plates, height of theoretical plate, peak symmetry and peak capacity were measured/calculated on the basis of data generated by analysis of apple extracts containing 17 (semi)polar pesticides representing various classes of active ingredients of widely used crop protective preparations. Ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) procedure provided improved chromatographic parameters resulting in significantly increased sample throughput including lower solvent consumption and lower limits of quantitation (LOQs) for most of target analytes compared to common method employing conventional high-performance liquid chromatography (HPLC) separation.

Evaluation of ultra performance liquid chromatography

A practical evaluation of the possibilities and limitations of ultra performance liquid chromatography (UPLC) is presented. Acquity BEH columns packed with 1.7 microm particles are evaluated by means of van Deemter and Knox plots. The columns are characterised by high optimal velocities (3.7 mm/s) and low plate heights (4.4 microm). Minimum plate heights of 2d(p) were, however, not reached and reasons are presented and discussed. Furthermore, the use of 1.7 microm particles at 1000 bar is compared, from a theoretical viewpoint, to conventional LC (3.5 and 5 microm particles at 400 bar) in terms of analysis speed and practical maximum efficiency. Experimental data are used to construct kinetic- or "Poppe-plots", which facilitate investigation of the effect of pressure and particle size on speed and efficiency. It is found that UPLC conditions hold advantages in terms of speed of analysis, for required theoretical plate counts up to approximately 80,000.

Fast analysis in liquid chromatography using small particle size and high pressure

In order to enhance chromatographic performances in terms of efficiency and rapidity, LC has recently evolved in the development of short columns packed with small particles (sub-2 microm) working at high pressures (> 400 bar). This approach has been described 30 years ago according to the fundamental chromatographic equations. However, systems and columns compatible with such high pressures have been introduced in the market in 2004 only. Advantages of small particles working at high pressure will be discussed in terms of sensitivity, efficiency, resolution, and analysis time. Potential problems encountered with high pressure in terms of frictional heating and solvent compressibility will also be discussed even if systems working at a maximum pressure of 1000 bar are not influenced by these parameters and give reliable and reproducible results. Several applications will highlight the potential and interest of this new technology.

Elevated temperature and temperature programming in conventional liquid chromatography – fundamentals and applications

Temperature, as a powerful variable in conventional LC is discussed from a fundamental point of view and illustrated with applications from the author's laboratory. Emphasis is given to the influence of temperature on speed, selectivity, efficiency, detectability, and mobile phase composition (green chromatography). The problems accompanying the use of elevated temperature and temperature programming in LC are reviewed and solutions are described. The available stationary phases for high temperature operation are summarized and a brief overview of recent applications reported in the literature is given.

Evaluation of column bleed by using an ultraviolet and a charged aerosol detector coupled to a high-temperature liquid chromatographic system

In this study, five different HPLC columns were heated to 200 degrees C using a homemade heating system which can be operated in temperature programmed mode. The column bleed as an indicator of induced degradation of the stationary phase material was evaluated using a charged aerosol detector (CAD) and an ultraviolet diode array detector (UV-DAD) at different wavelengths. The silica based C-18 stationary phase gave the highest bleed, and the carbon clad titanium dioxide column the lowest bleed. This was independent of both the detection technique and the wavelength.

Development and application of a specially designed heating system for temperature-programmed high-performance liquid chromatography using subcritical water as the mobile phase

A specially designed heating system for temperature-programmed HPLC was developed based on experimental measurements of eluent temperature inside a stainless steel capillary using a very thin thermocouple. The heating system can be operated at temperatures up to 225 degrees C and consists of a preheating, a column heating and a cooling unit. Fast cycle times after a temperature gradient can be realized by an internal silicone oil bath which cools down the preheating and column heating unit. Long-term thermal stability of a polybutadiene-coated zirconium dioxide column has been evaluated using a tubular oven in which the column was placed. The packing material was stable after 50h of operation at 185 degrees C. A mixture containing four steroids was separated at ambient conditions using a mobile phase of 25% acetonitrile:75% deionized water and a mobile phase of pure deionized water at 185 degrees C using the specially designed heating system and the PBD column. Analysis time could be drastically reduced from 17 min at ambient conditions and a flow rate of 1 mL/min to only 1.2 min at 185 degrees C and a flow rate of 5 mL/min. At these extreme conditions, no thermal mismatch was observed and peaks were not distorted, thus underlining the performance of the developed heating system. Temperature programming was performed by separating cytostatic and antibiotic drugs with a temperature gradient using only water as the mobile phase. In contrast to an isocratic elution of this mixture at room temperature, overall analysis time could be reduced two-fold from 20 to 10 min.

Ultrahigh pressure liquid chromatography using elevated temperature

Fast liquid chromatographic (LC) methods are important for a variety of applications. Reducing the particle diameter (d(p)) is the most effective way to achieve fast separations while preserving high efficiency. Since the pressure drop along a packed column is inversely proportional to the square of the particle size, when columns packed with small particles (<2 microm) are used, ultrahigh pressures (>689 bar) must be applied to overcome the resistance to mobile phase flow. Elevating the column temperature can significantly reduce the mobile phase viscosity, allowing operation at higher flow rate for the same pressure. It also leads to a decrease in retention factor. The advantage of using elevated temperatures in LC is the ability to significantly shorten separation time with minimal loss in column efficiency. Therefore, combining elevated temperature with ultrahigh pressure facilitates fast and efficient separations. In this study, C6-modified 1.0 microm nonporous silica particles were used to demonstrate fast separations using a temperature of 80 degrees C and a pressure of 2413 bar. Selected separations were completed in 30 s with efficiencies as high as 220,000 plates m(-1).

Immobilized polymeric stationary phases using metalized silica supports

Immobilized presynthesized polymers on porous metalized (zirconized or titanized) silica particles as new stationary phases with improved chemical stability for RP-HPLC are reviewed. The preparations using different polymers, such as poly(methyloctylsiloxane), poly(methyltetradecylsiloxane), and poly(butadiene), different immobilization steps (gamma radiation, thermal treatment, and microwave radiation), and the chromatographic performances of these phases for polar, apolar, acidic, and basic compounds are discussed. The stability of some of these stationary phases using alkaline mobile phases is also presented.

High-efficiency liquid chromatography on conventional columns and instrumentation by using temperature as a variable

High plate numbers were obtained in conventional LC by coupling columns and by using temperature to reduce the viscosity of the mobile phase. At 80 degrees C up to eight columns of 25 cm x 4.6 mm I.D. packed with 5 microm ODS particles could be coupled generating 180,000 effective plates while the pressure drop was only 350bar. For routine work, a set of four columns is preferred. The analysis times on one column operated at 30 degrees C and 1 mL/min flow rate and on four columns at 80 degrees C and 2 mL/min flow rate are the same in isoeluotropic conditions while the resolution is doubled. Multicolumn systems were successfully applied in isocratic and gradient mode for the analysis of pharmaceutical and environmental samples.

Hydrodynamic flow and electroosmotic flow in zirconia-packed capillaries

Fused-silica capillaries were packed with Zirchrom-PBD stationary phase for application in CEC, nanoLC and pseudoelectrochromatography (PEC). Acido-basic properties of zirconia can be used to control the EOF even if the zirconia particles were coated by polybutadiene. As for native zirconia, the EOF is pH-dependent and the pI is close to pH 5. The mixed-mode pressure-voltage technique induced a modulation of the mobile-phase velocity as well as an electrophoretic migration of the solutes in order to improve the resolution of the separation. A significant increase of the flow appeared when both hydrodynamic and EOFs were in the same direction. But an important reduction of the electroosmotic velocity was observed when the hydrodynamic flow and EOF were opposed in Zirchrom-PBD columns. This behaviour has been observed at high or low pH on several columns. Separations of neutral and charged compounds have been performed with these columns in PEC mode.

In-Depth Characterization of Slurry Packed Capillary Columns with 1.0-μm Nonporous Particles Using Reversed-Phase Isocratic Ultrahigh-Pressure Liquid Chromatography

Fused-silica capillary columns packed with 1.0-microm nonporous C18 bonded particles are evaluated with isocratic ultrahigh-pressure liquid chromatography (UHPLC). Improved UHPLC techniques have demonstrated column efficiencies as high as 730 000 plates/m and run pressures over 6800 bar (100 000 psi) for packed 10-microm-inner diameter (i.d.) columns. Columns as large as 150 microm have been tested with UHPLC and show no flow-induced heating effects on separation efficiencies. van Deemter plot analysis for column i.d.s ranging from 10 to 150 microm shows an increase in column efficiency with a decrease in column i.d. Reduced parameter analysis further illustrates a decrease in reduced parameter A term and C term values with decreasing i.d. However, reduced parameter C term values for columns evaluated with UHPLC are an order of magnitude larger than C term values for larger particles at conventional pressures. Retention factors for moderately retained compounds are observed to increase with column i.d., suggesting an increase in packing density. Highly ordered packing arrangement at the column wall is seen for packed beds extruded from large-diameter columns.

Mesoporous polybutadiene-modified zirconia for high-temperature packed capillary liquid chromatography: column preparation and temperature programming stability

In the present study, three different methods for packing of 3 microm PBD-ZrO2 particles in 0.5 mm i.d. glass-lined stainless steel columns have been examined. The two first methods were based on a traditional downstream high-pressure technique using tetrachloromethane (Method I) or aqueous Triton X-100 (Method II) as slurry solvents, while Method III was an upstream high-pressure flocculating method with stirring, using isopropanol both as the slurry and packing solvent. Method I was found to be superior in terms of efficiency, producing 0.5 mm i.d. x 10 cm columns with almost 90,000 plates m(-1) for toluene (R.S.D. = 8.7%, n = 3), using a slurry concentration of 600 mg ml(-1), ACN-water (50:50 (v/v)) as the packing solvent and a packing pressure of 650 bars. For Method I, the slurry concentration, column i.d., column length and initial packing pressure were found to have a significant effect on column efficiency. Finally, the long-term temperature stability of the prepared columns was investigated. In isothermal mode, using ACN-20 mM phosphate buffer, pH 7 (50:50 (v/v)) as the mobile phase, the columns were found to be stable for at least 3,000 void volumes at 100 degrees C. At this temperature, the solute efficiencies changed about 5-18% and the retention factors changed about 6-8%. In temperature programming mode (not exceeding 100 degrees C), on the other hand, a rapid decrease in both column efficiency and retention factors was observed. However, when the columns were packed as initially described, ramped up and down from 50 to 100 degrees C for 48 h and refilled, fairly stable columns with acceptable efficiencies were obtained. Although not fully regaining their initial efficiency after refilling, the solute efficiencies changed about 19-28% (32-37%) and the retention factors changed about 4-5% (13-17%) after running 3,000 (25,000) void volumes or 500 (3,900) temperature programs.

Synthesis of micron diameter polybutadiene-encapsulated non-porous zirconia particles for ultrahigh pressure liquid chromatography

In this study, 1-microm diameter polybutadiene-encapsulated non-porous zirconia particles were synthesized, slurry packed into 50-microm I.D. fused-silica capillary columns, and evaluated using ultrahigh pressure liquid chromatography. The dependencies of column efficiency and solute retention factor on pressure were investigated. Efficiencies as high as 280000 plates per meter were obtained for the separation of anti-inflammatory drugs at a pressure of 1351 MPa. Comparing the reversed-phase behavior of the polybutadiene-encapsulated non-porous zirconia with octadecylsilane bonded non-porous silica, greater selectivity was found using the zirconia-based material for the applications reported in this study. The encapsulated non-porous zirconia particles demonstrated excellent thermal stability in the separation of polycyclic aromatic hydrocarbons at a temperature of 100 degrees C and a pressure of 1351 MPa.