Advantages and limitations of coupling isotachophoresis and comprehensive isotachophoresis-capillary electrophoresis to time-of-flight mass spectrometry

Picomolar detection limits for glyphosate by two-dimensional column-coupled isotachophoresis/capillary zone electrophoresis-mass spectrometry

Capillary electrophoresis-mass spectrometry often lacks sufficient limits of detection for trace substances in the environment due to its low loadability. To overcome this problem, we conducted a feasibility study for column-coupling isotachophoresis to capillary electrophoresis-mass spectrometry. The first dimension isotachophoresis preconcentrated the analytes. The column-coupling of both dimensions was achieved by a hybrid capillary microfluidic chip setup. Reliable analyte transfer by voltage switching was enabled by an in-chip capacitively coupled contactless conductivity detector placed around the channel of the common section between two T-shaped crossings in the chip connecting both dimensions. This eliminated the need to calculate the moment of analyte transfer. A commercial capillary electrophoresis-mass spectrometry instrument with easily installable adaptations operated the setup. Prior to coupling isotachophoresis with capillary zone electrophoresis-mass spectrometry, both dimensions were optimized individually by simulations and verified experimentally. Both dimensions were able to stack/separate all degradation products of glyphosate, the most important herbicide applied worldwide. The first dimension isotachophoresis also removed phosphate, which is a critical matrix component in many environmental samples. Enrichment and separation of glyphosate and its main degradation product aminomethylphosphonic acid by the 2D setup provided an excellent limit of detection of 150 pM (25 ng/L) for glyphosate. This article is protected by copyright. All rights reserved.

Comparison of 1D a 2D ITP-MS performance parameters and application possibilities: Ultratrace determination of B vitamins in human urine

The possibility to investigate analytes at ultra-low concentration levels still remains a hot topic in bioanalysis. In this area, various preconcentration techniques are an integral part of analytical procedures. When applying electromigration separation techniques, an isotachophoresis has been advantageously employed many times for this purpose. To solve current biomedical tasks effectively, an advanced two-dimensional isotachophoretic instrument (in a hydrodynamically closed separation system with an enhanced sample load capacity) hyphenated with mass spectrometry (ITP-ITP-MS) has been proposed by Foret and coworkers. As a continuation, this work represents the first study dealing with a full validation of an ITP-ITP-MS method. In order to see the benefits of an online ITP sample pretreatment (preconcentration and clean-up) on the performance parameters, the developed 2D ITP-MS method was compared with a corresponding 1D ITP-MS method. Application potentialities of the compared methods were demonstrated via a determination of two B vitamins, namely thiamine and pyridoxine, in human urine samples. The developed 2D ITP-MS method showed its enhanced effectivity and usefulness for a routine biomedical use (here, a reliable screening of trace B vitamins in human urine without an offline sample preparation).

Capillary isotachophoresis with electrospray-ionization mass-spectrometric detection: Cationic electrolyte systems in the medium-alkaline range for selective analysis of medium strong bases

This work extends the present working range of isotachophoresis (ITP) with electrospray-ionization mass-spectrometric (ESI-MS) detection and describes for the first time a functional cationic electrolyte system for analyses at medium-alkaline pH. So far no ITP-MS application was published on the analysis of medium strong bases although there is a broad spectrum of potential analytes like biogenic amines, alkaloids or drugs, where this technique promises interesting gains in both sensitivity and specificity. The presented results include a selection of suitable sufficiently volatile ESI-compatible system components, discussion of factors affecting system properties, and recommendations for functional ITP electrolyte systems. Theoretical conclusions based on calculations and computer simulations are confirmed by experiments with a model mixture of beta-blockers. Practical applicability of the method is demonstrated on the example of analysis of sotalol in dried blood spots where direct injection of aqueous extract, ITP stacking and MS detection provide a fast, simple and sensitive technique with limits of quantitation on the sub-nM level.

Fluoroacetylation/fluoroethylesterification as a derivatization approach for gas chromatography-mass spectrometry in metabolomics: preliminary study of lymphohyperplastic diseases

Metabolic fingerprinting in combination with gas chromatography and multivariate analysis is being extensively employed for the improved understanding of biological changes induced by endogenous or exogenous factors. Chemical derivatization increases the sensitivity and specificity of gas chromatography-mass spectrometry (GC-MS) for polar or thermally labile biological compounds, which bear derivatizable groups. Thus, there is a constant demand for simple methods of derivatization and separation that satisfy the need for metabolite analysis, identifying as many chemical classes of compounds as possible. In this study, an optimized protocol of extraction and derivatization is established as a generally applicable method for the analysis of a wide range of classes of metabolites in urine, whole blood and saliva. Compounds of biological relevance bearing hydroxyl- carboxyl- and amino-groups are derivatized using single-step fluoroacetylation/fluoroethylesterification after proper optimization of the protocol. Subsequently, the developed derivatization procedure is engaged in finding blood metabolic biomarkers, induced by lymphohyperplastic disease, through the metabolomic fingerprinting approach, the multivariate modeling (hierarchical cluster analysis) and GC-MS. Our preliminary, GC-MS-based metabolomic fingerprinting study underlines the contribution of certain metabolites to the discrimination of patients with lymphohyperplastic diseases.

On-line preconcentration and quantitative analysis of peptide hormone of brain and intestine using on-column transient isotachophoresis coupled with capillary electrophoresis/electrospray ionization mass spectrometry

A new approach was described to achieve very sensitive analysis of peptide hormone of brain and intestine by capillary electrophoresis coupled with a transient isotachophoresis (tITP) preconcentration method. The system used was electrospray ionization mass spectrometry (ESI-MS) as detector and equipped with a sheath flow configuration. The effects of sample matrix, pH and concentration of leading electrolyte (LE), sample injection time, and ESI-MS instrumental parameters on the efficiency of the sample stacking were investigated in detail. Under the optimized conditions, lower than micromole (0.01 microM) concentrations of the peptides were easily detected. Compared to traditional hydrodynamic injection methods, about 40-230-fold increase in detection sensitivity was obtained by this technique. A distinguishing feature of the described approach is that the background electrolyte can serve as terminating electrolyte (TE), which simplifies the process of the experiments. The method was further evaluated by the analysis of low concentration active peptide mixtures spiked in hypothalamus tissue of the rat.

Analysis of major alkaloids in Rhizoma coptidis by capillary electrophoresis-electrospray-time of flight mass spectrometry with different background electrolytes

CE-based techniques with DAD and detection ESI-TOF-MS have been developed for the analysis of seven protoberberine alkaloids and one aporphinoid alkaloid in Huanglian (Rhizoma coptidis), a well-known traditional Chinese herbal medicine. One aqueous BGE and one nonaqueous BGE were developed for CE-DAD and CE-MS analyses, and the CE-ESI-TOF-MS conditions including nebulizer gas pressure, the sheath-liquid composition, its flow rate, etc. were optimized. Eight main alkaloids in R. coptidis could be separated with baseline resolution by CE-DAD with these two different BGEs, and identified by TOF-MS analysis. Moreover, three major alkaloids (berberine, palmatine, and jatrorrhizine) could be quantified accurately by CE-DAD and CE-MS with the BGE system consisting of 50:50 v/v water and ACN containing 50 mM ammonium acetate at pH 6.8. Both techniques provided similar LODs and could be applied with confidence within similar linear dynamic range. However, reproducibility and speed of analysis were better using CE-DAD. When the CE technique was compared with the RP-HPLC method, the CE-DAD and CE-MS methods provided greater efficiency and faster analysis speed, i.e., achieving baseline resolution for all the eight main basic compounds in less than 14 min. The CE method, as a viable alternative to HPLC, is suitable for use as a routine procedure for the rapid identification and quantification of basic compounds in herbal or natural product applications.

Continuous mode of operation for large volume dosing in analytical carrier ampholyte-free isoelectric focusing of proteins applied to off-line detection of fractions

Mass spectrometry is being increasingly used for analysis of proteome complex samples. Sample preparation is often necessary to remove matrix interferences and to concentrate analytes prior to MS measurement. A useful method for this purpose is Carrier Ampholyte Free-Isoelectric Focusing (CAF-IEF). In this paper CAF-IEF of ampholytes was performed on a commercial apparatus EA101 (Villa Labeco, Slovakia) equipped with a specially made column for samples of large volume (up to 0.5 mL). A new continuous mode without voltage interruption or electrolyte replacement was developed. In this mode, a low molecular mass pI marker (PIM 7.4) and low concentrations of myoglobin and insulin (16 mg/L), respectively, were concentrated, and then 5-microL fractions collected for off-line analyses. The total time of focusing was 66 minutes. The concentration of PIM 7.4 in the fractions was increased up to 75 times (determined by UV-VIS spectrometry). The concentration in the fractions was increased up to 30 times for myoglobin and 10 times for insulin.

Integrative Metabolomics for Characterizing Unknown Low-Abundance Metabolites by Capillary Electrophoresis-Mass Spectrometry with Computer Simulations

Characterization of unknown low-abundance metabolites in biological samples is one the most significant challenges in metabolomic research. In this report, an integrative strategy based on capillary electrophoresis-electrospray ionization-ion trap mass spectrometry (CE-ESI-ITMS) with computer simulations is examined as a multiplexed approach for studying the selective nutrient uptake behavior of E. coli within a complex broth medium. On-line sample preconcentration with desalting by CE-ESI-ITMS was performed directly without off-line sample pretreatment in order to improve detector sensitivity over 50-fold for cationic metabolites with nanomolar detection limits. The migration behavior of charged metabolites were also modeled in CE as a qualitative tool to support MS characterization based on two fundamental analyte physicochemical properties, namely, absolute mobility (muo) and acid dissociation constant (pKa). Computer simulations using Simul 5.0 were used to better understand the dynamics of analyte electromigration, as well as aiding de novo identification of unknown nutrients. There was excellent agreement between computer-simulated and experimental electropherograms for several classes of cationic metabolites as reflected by their relative migration times with an average error of <2.0%. Our studies revealed differential uptake of specific amino acids and nucleoside nutrients associated with distinct stages of bacterial growth. Herein, we demonstrate that CE can serve as an effective preconcentrator, desalter, and separator prior to ESI-MS, while providing additional qualitative information for unambiguous identification among isobaric and isomeric metabolites. The proposed strategy is particularly relevant for characterizing unknown yet biologically relevant metabolites that are not readily synthesized or commercially available.

Recent progress in capillary ITP

ITP has been attracting constant attention for many years due to its principal capability to concentrate trace analytes by several orders of magnitude. In the current capillary format, it is able to concentrate trace analytes diluted to several microliters of an original sample into concentrated zones having volumes in the range of picoliters. Due to this reason, ITP holds an important position in many current multistage and multidimensional separation schemes. This article links up previous reviews on the topic and summarizes the progress of analytical capillary ITP since 2002. Almost 100 papers are reviewed that include methodological novelties, instrumental aspects, and analytical applications. Papers using ITP and/or isotachophoretic principles as part of multistage and/or multidimensional separation schemes are also included.

Capillary isotachophoresis from the student point of view – images and the reality

A review of some fundamental aspects of ITP from the student point of view, imaginations of some basic facts and laws, use of ITP, and the recent trends are presented. The results of theoretical computations of ITP separation processes are added for comparison of imaginations with the exact mathematical description.

Capillary electrophoresis-based separation techniques for the analysis of proteins

CE offers the advantages of high speed, great efficiency, as well as the requirement of minimum amounts of sample and buffer for the analysis of proteins. In this review, we summarize the CE-based techniques coupled with absorption, LIF, and MS detection systems for the analysis of proteins mostly within the past 5 years. The basic principle of each technique and its advantages and disadvantages for protein analysis are discussed in brief. Advanced CE techniques, including on-column concentration techniques and high-efficiency multidimensional separation techniques, for high-throughput protein profiling of complex biological samples and/or of single cells are emphasized. Although the developed techniques provide improved peak capacity, they have not become practical tools for proteomics, mainly because of poor reproducibility, low-sample lading capacity, and low throughput due to ineffective interfaces between two separation dimensions and that between separation and MS systems. In order to identify the complexities and dynamics of the proteomes expressed by cells, tissues, or organisms, techniques providing improved analytical sensitivity, throughput, and dynamic ranges are still demanded.

Recent developments in capillary electrophoresis and capillary electrochromatography of peptides

The article gives a comprehensive review on the recent developments in the applications of high-performance capillary electromigration methods, zone electrophoresis, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography, and electrochromatography, to analysis, preparation, and physicochemical characterization of peptides. The article presents new approaches to the theoretical description and experimental verification of electromigration behavior of peptides, covers the methodological aspects of capillary electroseparations of peptides, such as rational selection of separation conditions, sample preparation, suppression of peptide adsorption, new developments in individual separation modes, and new designs of detection systems. Several types of applications of capillary electromigration methods to peptide analysis are presented: conventional qualitative and quantitative analysis, purity control, determination in biomatrices, monitoring of chemical and enzymatical reactions and physical changes, amino acid and sequence analysis, and peptide mapping of proteins. Some examples of micropreparative peptide separations are given and capabilities of capillary electromigration techniques to provide important physicochemical characteristics of peptides are demonstrated.

Recent advances in the application of capillary electrophoresis with mass spectrometric detection

This review gives an overview of applications of CE coupled to MS detection published in the literature of the last three years. The works discussed in this paper comprise a wide range of different fields of application. These include important sections such as the analysis of biomolecules, the analysis of pharmaceuticals and their metabolites in different matrices, environmental analysis, and also investigations on the composition of technical products.

Capillary electrophoresis - mass spectrometry: survey on developments and applications 2003-2004

The major developments and applications related to CE-MS over the last two years (2003-2004) and most of the reviews and applications found in the ISI Web of Science and publisher data bases are presented in a tabulated way. This article complements our previous review "Capillary electrophoresis - mass spectrometry: 15 years of developments and applications", Electrophoresis, 2003, 24, 3837-3867 for the last two years 2003-2004. All cited articles were analyzed in a way to illustrate (i) in which journals CE-MS-related papers were mostly found over the last decades and (ii) which commercial CE-, MS-instrumentations or CE-MS combinations were mostly used in the European, Asian, and American continent. Additionally, like it was done in our last review, the reader will rapidly find applications classified as forensics, environment, bioanalytics, pharmaceutics, and metabolites.

Advances in the analysis of proteins and peptides by capillary electrophoresis with matrix-assisted laser desorption/ionization and electrospray-mass spectrometry detection

High throughput, outstanding certainty in peptide/protein identification, exceptional resolution, and quantitative information are essential pillars in proteome research. Capillary electrophoresis (CE) coupled to mass spectrometry (MS) has proven to meet these requirements. Soft ionization techniques, such as matrix-assisted laser desorption/ionization (MALDI) and electrospray ionization (ESI), have paved the way for the story of success of CE-MS in the analysis of biomolecules and both approaches are subject of discussion in this article. Meanwhile, CE-MS is far away from representing a homogeneous field. Therefore the review will cover a vast area including the coupling of different modes of CE (capillary zone electrophoresis, capillary isoelectric foscusing, capillary electrochromatography, micellar electrokinetic chromatography, nonaqueous capillary electrophoresis) to MS as well as on-line preconcentration techniques (transient capillary isotachophoresis, solid-phase extraction, membrane preconcentration) applied to compensate for restricted detection sensitivity. Special attention is given to improvements in interfacing, namely addressing nanospray and coaxial sheath liquid design. Peptide mapping, collision-induced dissociation with subsequent tandem MS, and amendments in mass accuracy of instruments improve information validity gained from MS data. With 2-D on-line coupling of liquid chromatography (LC) and CE a further topic will be discussed. A special section is dedicated to recent attempts in establishing CE-ESI-MS in proteomics, in the clinical and diagnostic field, and in the food sector.

Combining capillary electrophoresis with mass spectrometry for applications in proteomics

Mass spectrometry (MS)-based proteomics is currently dominated by the analysis of peptides originating either from digestion of proteins separated by two-dimensional gel electrophoresis (2-DE) or from global digestion; the simple peptide mixtures obtained from digestion of gel-separated proteins do not usually require further separation, while the complex peptide mixtures obtained by global digestion are most frequently separated by chromatographic techniques. Capillary electrophoresis (CE) provides alternatives to 2-DE for protein separation and alternatives to chromatography for peptide separation. This review attempts to elucidate how the most promising CE modes, capillary zone electrophoresis (CZE) and capillary isoelectric focusing (CIEF), might best be applied to MS-based proteomics. CE-MS interfacing, mass analyzer performance, column coating to minimize analyte adsorption, and sample stacking for CZE are considered prior to examining numerous applications. Finally, multidimensional systems that incorporate CE techniques are examined; CZE often finds use as a fast, final dimension before ionization for MS, while CIEF, being an equilibrium technique, is well-suited to being the first dimension in automated fractionation systems.