Pressure-induced effects in the heterogeneous adsorption of insulin on chromatographic surfaces

A Novel Study on the Role of Pressure on Surface Adsorption from Solutions

In this work, we present experimental data on the behavior of model additives adsorbed at the solid/liquid interface as a function of pressure. We report that some additives adsorbed from non-aqueous solvents exhibit rather little variation with pressure, while others exhibit more significant changes. We also display the important pressure dependence of added water. This pressure dependence is relevant, indeed central to many commercially important situations where the adsorption of molecular species to the solid/liquid interface under high pressure is key, such as wind turbines, and this work should help in understanding how protective, anti-wear, or friction-reducing agents can persist (or not) under these extreme conditions. With a very significant gap in the fundamental understanding of the role of pressure on adsorption from solution phases, this important fundamental study provides a methodology to investigate the pressure dependence of these academically and commercially important systems. In the best case, one may even be able to predict which additives will lead to more adsorption under pressure and avoid those that may desorb.

Mass-Transfer Kinetics in a Shell Packing Material for Chromatography

A shell particle consists of a solid, nonporous core that is surrounded with a shell of a porous solid having essentially the same physicochemical properties as those of the conventional porous particles used as packing media in chromatography. The diameter of the solid core and the thickness of its shell or the external diameter of the particle characterizes the chromatographic properties of the packing material. The potential advantage of this particle structure would be the shorter average path length experienced by solute molecules during their diffusion across the particles of packing material when they are retained. Compounds having slow pore diffusion would exhibit higher efficiencies on columns packed with shell than with conventional, fully porous particles. Using columns packed with Halo, a new type of porous silica shell particles, we assess the gain achieved with this principle for peptides of moderate molecular weights and for small proteins.

Comparison between the efficiencies of columns packed with fully and partially porous C18-bonded silica materials

The chromatographic performance of a new brand of shell particles is compared to that of a conventional brand of totally porous silica particles having a similar size. The new material (Halo, Advanced Materials Technology, Wilmington, DE) is made of 2.7 microm particles that consist in a 1.7 microm solid core covered with a 0.5 microm thick shell of porous silica. The other material consists of the porous particles of a conventional 3 microm commercial silica-B material. These two columns have the same dimensions, 150 mm x 4.6mm. The reduced plate heights of two low molecular weight compounds, naphthalene and anthracene, two peptides (lys-bradykinin and bradykinin), and four proteins, insulin, lysozyme, beta-lactoglobulin, and bovine serum albumin were measured in a wide flow rate range and analyzed on the basis of the Van Deemter equation and of modern models for its terms. The Halo column provides a smaller axial diffusion coefficient B and a smaller eddy dispersion term A than the other column, a result consistent with its lower internal porosity (in(p)=0.19 versus 0.42) and with the narrower size distribution of its particles (sigma=5% versus 13%). The two columns have similar C terms for the two low molecular weight compounds and for the two peptides. However, the C term of the proteins that are not excluded is markedly lower on the column packed with the Halo particles than on the other column. A recent theoretical analysis of the mass transfer kinetics in shell particles predicts a C term for moderately retained proteins (3<k'<5) that is about 35% lower for shell than for fully porous particles while the experimental data show a value nearly 45% lower, an excellent agreement considering that the internal tortuosity of the particles might be different, affecting the ratio of the effective diffusivities (D(eff)) of the proteins in the two materials. Surprisingly, the Kozeny-Carman constant of the Halo packed column is 50% larger than that of the other column, in spite of which the permeability of the Halo column is slightly larger, due to its larger external porosity.

Development of a reversed-phase high-performance liquid chromatography method for the analysis of components from a closed-loop insulin delivery system

A reversed-phase HPLC method has been developed which enables separation of the three components of a closed-loop insulin delivery system, namely concanavalin A methacrylamide (Con A-MA), dextran methacrylate (Dex-MA) and bovine insulin. The analysis of Con A-MA represents a significant challenge due to the formation of multiple conformations on contact with the chromatographic surface and the mobile phase. The extent of conformational change is shown to be dependent on a number of parameters: column temperature, mobile phase pH, contact time with the chromatographic surface, salt type and concentration and the organic modifier. By manipulation of these variables, protein denaturation can be minimised and recovery improved.