Purification by reflux electrophoresis of whey proteins and of a recombinant protein expressed in Dictyostelium discoideum

Purification of Fab fragments from a monoclonal antibody papain digest by Gradiflow electrophoresis

Fab fragments isolated from papain digests of monoclonal antibodies have a wide variety of uses in analytical and in both in vivo and in vitro diagnostic applications. A novel, non-affinity method which uses the Gradiflow to purify Fab fragments from the papain digest of a mouse IgG1 anti-c-myc monoclonal antibody is described. The Gradiflow is a preparative electrophoresis instrument that uses polyacrylamide membranes of known pore size to separate proteins in solution in their native state under mild pH conditions by charge or size. The Fab and Fc fragments from the papain digestion were characterized using isoelectric focusing (IEF) and non-reducing SDS-PAGE in conjunction with IEF and Western blot. There were three Fab isoforms with p [Formula: see text] between pH 6.5 and 7.4 while the Fc had a range of isoforms between 6.1 and 6.3. Both Fab and Fc fragments had similar [Formula: see text] of 50kDa. A charge-based purification strategy was developed to obtain a high purity Fab preparation after 10min, confirmed by Western blot and chemiluminescence analyses. A small quantity of residual undigested IgG1 remained and was removed using a size-based separation. The efficiency of the separation despite the narrow pH range between Fab and Fc suggests that this technique may be an alternative to protein A or G affinity separation of Fc and Fab monoclonal antibody fragments from papain digests of monoclonal antibodies.

Purification of antibody Fab and F(ab′)2 fragments using Gradiflow technology

The Gradiflow, a preparative electrophoresis instrument designed to separate molecules on the basis of their size and charge, was used to purify antibody Fab and F(ab')2 fragments. The method described is charge based, utilizing the difference in the pI between the antibody Fab/F(ab')2 fragments and antibody Fc fragments that occur after enzyme digestion of whole antibody molecules. This method of purification was successful across a range of monoclonal and polyclonal antibodies. In particular, F(ab')2 fragments were purified from a number of mouse monoclonal antibodies (both IgG1 and IgG2a isotypes) and Fab fragments were purified from egg yolk IgY polyclonal antibodies. This is a rapid purification method which has advantages over alternative methods that usually comprise ion exchange and gel filtration chromatography. This method may be applicable to most antibody digest preparations.

Purification of recombinant human growth hormone from CHO cell culture supernatant by Gradiflow preparative electrophoresis technology

Purification of recombinant human growth hormone (rhGH) from Chinese hamster ovary (CHO) cell culture supernatant by Gradiflow large-scale electrophoresis is described. Production of rhGH in CHO cells is an alternative to production in Escherichia coli, with the advantage that rhGH is secreted into protein-free production media, facilitating a more simple purification and avoiding resolubilization of inclusion bodies and protein refolding. As an alternative to conventional chromatography, rhGH was purified in a one-step procedure using Gradiflow technology. Clarified culture supernatant containing rhGH was passed through a Gradiflow BF200 and separations were performed over 60 min using three different buffers of varying pH. Using a 50 mM Tris/Hepes buffer at pH 7.5 together with a 50 kDa separation membrane, rhGH was purified to approximately 98% purity with a yield of 90%. This study demonstrates the ability of Gradiflow preparative electrophoresis technology to purify rhGH from mammalian cell culture supernatant in a one-step process with high purity and yield. As the Gradiflow is directly scalable, this study also illustrates the potential for the inclusion of the Gradiflow into bioprocesses for the production of clinical grade rhGH and other therapeutic proteins.

Design of a new, twelve-channel electrophoretic apparatus based on the Gradiflow technology

The Gradiflow technology, originally designed to carry out binary, size-based and charge sign-based electrophoretic protein separations, has been extended to simultaneously obtain multiple protein fractions from a single electrophoretic separation. The separation unit of the new apparatus houses the anode and cathode compartments and up to twelve shallow separation compartments through which the background electrolyte solution that contains the separated protein fractions is recirculated. The separation compartments are formed from grids as thin as 1.2 mm and polyacrylamide membranes as thin as 0.15 mm, all with corresponding multiple inlet and outlet ports. The average pore size of the polyacrylamide membranes can be varied to permit passage of proteins in the 5000-800 000 molecular mass range. The electric field, orthogonal to the flow paths of the recirculated background electrolyte, selectively moves the sample components across the polyacrylamide separation membranes. Selective protein transport can be achieved by exploiting differences in either the relative size of the proteins or the charge sign of the proteins. The advantages of the new apparatus stem from the synergistic combination of the short electrophoretic transfer distances, high electric field strength, large effective surface areas of the separation membranes, and the great flexibility with which apparati containing one to twelve separation compartments can be created.

Preparative-scale isoelectric trapping enantiomer separations

The new Gradiflow BF200 IET unit, developed for isoelectric trapping protein separations has been modified and used to carry out preparative-scale enantiomer separations. Hydroxypropyl beta-cyclodextrin was used as the chiral resolving agent to induce an isoelectric point difference between the enantiomers. Three isoelectric membranes with isoelectric points below, in between and above the isoelectric points of the complexed enantiomers were used to trap the separated enantiomers in the anodic and cathodic separation compartments of the Gradiflow BF200 IET apparatus, respectively. The production rates were about 15 times higher than those previously obtained with another isoelectric trapping device and about 30% higher than those obtained in a continuous free-flow electrophoretic device operated in the isoelectric focusing mode. The remarkable separation speed observed in the modified Gradiflow BF200 IET unit is attributed to the favorable interplay of the short electrophoretic transfer distance, the high electric field strength and the large effective surface areas of the isoelectric membranes.

Preparative-scale isoelectric trapping separations using a modified Gradiflow unit

The Gradiflow BF200 preparative electrophoretic unit (Gradipore), which has been developed for size-based and charge-sign-based protein separations and in which the hydraulic flow path of the recirculating sample stream in the separation cartridge is orthogonal to the electric field, has been modified to carry out binary protein separations using the principles of isoelectric trapping. The disposable separation cartridge contained three isoelectric membranes which, along with the cartridge holder, formed the anode and cathode compartments and the anodic and cathodic separation compartments. The utility of the modified instrument was demonstrated by effecting a binary separation of chicken egg white across an isoelectric point 5.5 isoelectric membrane. The desalting and subsequent binary separation steps proved to be remarkably rapid, due to the favorable combination of short electrophoretic path, high electric field strength and large effective isoelectric membrane surface area.

Preparative electrophoresis: a general method for the purification of polyclonal antibodies

Antibodies were purified from normal rabbit, sheep, goat, rat, human and bovine serum using preparative electrophoresis on a Gradiflow in a single-step process using an asymmetrical cartridge with three different pore size polyacrylamide membranes. Recoveries in each case were over 80% and were higher than those obtained using affinity chromatography on protein A, protein G or protein L. Degree of purity was at least comparable with these methods. These results suggest that preparative electrophoresis can be considered a general method for the purification of research quantities of antibodies from multiple serum sources and may be particularly useful where the reactivity with protein A, G or L is unknown.

Dictyostelium discoideum as expression host: isotopic labeling of a recombinant glycoprotein for NMR studies

The advantages of the organism Dictyostelium discoideum as an expression host for recombinant glycoproteins have been exploited for the production of an isotopically labeled cell surface protein for NMR structure studies. Growth medium containing [(15)N]NH(4)Cl and [(13)C]glycerol was used to generate isotopically labeled Escherichia coli, which was subsequently introduced to D. discoideum cells in simple Mes buffer. A variety of growth conditions were screened to establish minimal amounts of nitrogen and carbon metabolites for a cost-effective protocol. Following single-step purification by anion-exchange chromatography, 8 mg of uniformly (13)C,(15)N-labeled protein secreted by approximately 10(10) D. discoideum cells was isolated from 3.3 liters of supernatant. Mass spectrometry showed the recombinant protein of 16 kDa to have incorporated greater than 99.9% isotopic label. The two-dimensional (1)H-(13)C HSQC spectrum confirms (13)C labeling of both glycan and amino acid residues of the glycoprotein. All heteronuclear NMR spectra showed a good dispersion of cross-peaks essential for high-quality structure determination.

The dynamic range of protein expression: a challenge for proteomic research

Proteomic research, for its part, is benefiting enormously from the last decade of genomic research as we now have archived, annotated and audited sequence databases to correlate and query experimental data. While the two-dimensional electrophoresis (2-DE) gels are still a central part of proteomics, we reflect on the possibilities and realities of the current 2-DE technology with regard to displaying and analysing proteomes. Limitations of analysing whole cell/tissue lysates by 2-DE alone are discussed, and we investigate whether extremely narrow p/ranges (1 pH unit/25 cm) provide a solution to display comprehensive protein expression profiles. We are confronted with a challenging task: the dynamic range of protein expression. We believe that most of the existing technology is capable of displaying many more proteins than is currently achievable by integrating existing and new techniques to prefractionate samples prior to 2-DE display or analysis. The availability of a "proteomics toolbox", consisting of defined reagents, methods, and equipment, would assist a comprehensive analysis of defined biological systems.

Electrophoretic transfer of proteins across polyacrylamide membranes

The electrophoretic transfer of purified proteins has been examined in a Gradiflow "Babyflow BF100" unit. A number of factors affect protein separation within this preparative electrophoresis system. We established that the rate of protein transfer was proportional to the applied voltage. The transfer is slowest at the isoelectric point (pI) and increased the further away the pH was from the pI of the protein. Protein transfer was found to be independent of the ionic strength of the buffer, for buffers that excluded the addition of strong acids or strong bases or sodium chloride. Transfer decreased as the pore size of the membrane decreased. Finally, transfer was inhibited at high salt concentrations in the protein solution, but remained unaffected when urea and non-ionic detergents were added to the solution. To increase the speed of protein separations, buffers with low conductivity should be used. A pH for the optimal separation should be selected on the basis of the relative pI and size of the target proteins and that of the major contaminants.