Mechanism of capillary electrophoresis enantioseparations using a combination of an achiral crown ether plus cyclodextrins

Capillary electrophoresis and molecular modeling of the chiral separation of aromatic amino acids using α/β-cyclodextrin and 18-crown-6

In this work, chiral separation of enantiomers of three amino acids was achieved using capillary electrophoresis technique with α-cyclodextrin (αCD) as a running buffer additive. Only tryptophan has exhibited baseline separation in the presence of αCD, while the enantiomers of the other two amino acids, phenylalanine and tyrosine, were only partially separated. The addition of 18-crown-6 (18C6) as a second additive imparted only slight improvement to the separation of all enantiomers. On the other hand, all three racemic amino acid mixtures demonstrated no indication of separation when the larger cavity cyclodextrin members, β- and γCD, are used as running buffer chiral additives. However, remarkable improvements in the separation of the enantiomers of phenylalanine and tyrosine were obtained when 18C6 is used together with βCD as a running buffer additive. Surprisingly, tryptophan enantiomers were not separated by the dual additive system of cyclodextrin and crown ether. Using electrospray ionization mass spectrometry (ESI-MS), all amino acids were found to form stable binary complexes with individual hosts as well as ternary compounds involving the crown ether and the cyclodextrin. Furthermore, we used molecular dynamics (MD) simulations to build a clear picture about the interaction between the guest and the hosts. Most of these complexes remained stable throughout the simulation times, and the molecular dynamics study allowed better understanding of these supramolecular assemblies.

Past, present, and future developments in enantioselective analysis using capillary electromigration techniques

Enantioseparation of chiral products has become increasingly important in a large diversity of academic and industrial applications. The separation of chiral compounds is inherently challenging and thus requires a suitable analytical technique that can achieve high resolution and sensitivity. In this context, CE has shown remarkable results so far. Chiral CE offers an orthogonal enantioselectivity and is typically considered less costly than chromatographic techniques, since only minute amounts of chiral selectors are needed. Several CE approaches have been developed for chiral analysis, including chiral EKC and chiral CEC. Enantioseparations by EKC benefit from the wide variety of possible pseudostationary phases that can be employed. Chiral CEC, on the other hand, combines chromatographic separation principles with the bulk fluid movement of CE, benefitting from reduced band broadening as compared to pressure-driven systems. Although UV detection is conventionally used for these approaches, MS can also be considered. CE-MS represents a promising alternative due to the increased sensitivity and selectivity, enabling the chiral analysis of complex samples. The potential contamination of the MS ion source in EKC-MS can be overcome using partial-filling and counter-migration techniques. However, chiral analysis using monolithic and open-tubular CEC-MS awaits additional method validation and a dedicated commercial interface. Further efforts in chiral CE are expected toward the improvement of existing techniques, the development of novel pseudostationary phases, and establishing the use of chiral ionic liquids, molecular imprinted polymers, and metal-organic frameworks. These developments will certainly foster the adoption of CE(-MS) as a well-established technique in routine chiral analysis.

Chirality dependent inverse-melting and re-entrant gelation in α-cyclodextrin/1-phenylethylamine mixtures

Solutions of cyclohexakis-(1→4)-α-d-glucopyranosyl, α-cyclodextrin, αCD, in R-(+)-1-phenylethylamine, αCD/R-PEA, and S-(−)-1-phenylethylamine, αCD/S-PEA, display abnormal phase transitions that strongly depend on supramolecular diastereomeric interactions. While αCD/R-PEA mixtures show one sol–gel inverse-melting phase transition, αCD/S-PEA mixtures show temperature dependent gel–sol–gel re-entrant behavior. NMR, Raman spectroscopy, microscopy and X-ray scattering measurements reveal that hydrogen bond weakening in solution, as well as changes in crystal composition are responsible for entropy increase and gel formation upon heating.

Solutions of α-cyclodextrin in chiral 1-phenylethylamine display abnormal phase transitions. Depending on supramolecular diastereomeric interactions, inverse-melting and re-entrant gels are formed.

Some thoughts about enantioseparations in capillary electrophoresis

In this overview the goal of the authors was to analyze from the historical perspective the reasons of success and failure of chiral capillary electrophoresis. In addition, the current trends are analyzed, unique advantages of capillary electrophoresis are highlighted and some future directions are discussed.

Contemporary theory of enantioseparations in capillary electrophoresis

The first separation of enantiomers in capillary electrophoresis (CE) counts slightly longer than three decades. Fast development of the practice and theory of chiral CE occurred in the past 30 years and today one can consider this technology to have a solid and mature theoretical background. The goal of the present review is not only to summarize the history and contemporary theory of enantioseparations by using CE but also to present the authors personal view where shall we head to with this attractive technology not only from the viewpoint of separation of enantiomers but also for better understanding the mechanisms of non-covalent (enantioselective) interactions in chemistry, biology, medicine and related disciplines.

Inclusion complexes of norepinephrine with β-cyclodextrin, 18-crown-6 and cucurbit[7]uril: experimental and molecular dynamics study

Binary and ternary complexes of norepinephrine with 18C6, βCD and CB7 have been characterized using various experimental and theoretical techniques.

Compatibility of highly sulfated cyclodextrin with electrospray ionization at low nanoliter/minute flow rates and its application to capillary electrophoresis/electrospray ionization mass spectrometric analysis of cathinone derivatives and their optical isomers

RATIONALE

Sodium salts of cyclodextrins are commonly used in capillary electrophoresis/mass spectrometry (CE/MS) analysis of illicit drugs and their optical isomers. To avoid the suppression effect of cyclodextrins under electrospray ionization (ESI), the partial filling technique (PFT) is commonly utilized, which has a limited resolution. Low-flow nano-ESI has been shown to reduce the suppression effect of the salts. To test the compatibility of low-flow ESI with a background electrolyte (BGE) containing sodium salts of cyclodextrin, sheathless narrow capillary CE/MS with flow rates of low nanoliters/minute (nL/min) was applied to the separation and detection of cathinones and their positional and optical isomers for the first time.

METHODS

Low-flow sheathless CE/MS using a 20-µm-i.d. capillary in conjunction with a porous tip interface was used for the separation of cathinone derivatives and their optical isomers. Highly sulfated γ-cyclodextrin (HS-γ-CD) in conjunction with (+)-18-crown-6-tetracarboxylic acid ((+)-18-C-6-TCA) was used as the BGE and an ion trap mass spectrometer operating in full scan mode was utilized.

RESULTS

Utilizing low flow rate (~10 nL/min) sheathless CE/MS, the use of the sodium salt of HS-γ-CD as the BGE was compared with the same solution using PFT. The relative and absolute sensitivity of detection of cathinones were about the same, indicating that under low-flow sheathless CE/MS there was no significant suppression due to the existence of HS-γ-CD in the electrospray process. However, enhanced resolution of cathinone derivatives and their positional and optical isomers was observed when the solution of HS-γ-CD was used as the BGE. The enhanced resolution was because of the presence of the HS-γ-CD in the entire capillary during the analysis. The addition of 15 mM (+)-18-C-6-TCA to the BGE containing HS-γ-CD further enhanced the resolution resulting in separation of all cathinones and their positional and optical isomers.

CONCLUSIONS

A novel CE/MS technique has been introduced that combines low-flow sheathless CE/MS, with HS-γ-CD and 15 mM (+)-18-C-6-TCA as the BGE for separation of cathinone derivatives as well as their positional and optical isomers.

Capillary electrophoresis separation of peptide diastereomers that contain methionine sulfoxide by dual cyclodextrin-crown ether systems

A dual-selector system employing achiral crown ethers in combination with cyclodextrins has been developed for the separation of peptide diastereomers that contain methionine sulfoxide. The combinations of the crown ethers 15-crown-5, 18-crown-6, Kryptofix® 21 and Kryptofix® 22 and β-cyclodextrin, carboxymethyl-β-cyclodextrin, and sulfated β-cyclodextrin were screened at pH 2.5 and pH 8.0 using a 40/50.2 cm, 50 μm id fused-silica capillary and a separation voltage of 25 kV. No diastereomer separation was observed in the sole presence of crown ethers, while only sulfated β-cyclodextrin was able to resolve some peptide diastereomers at pH 8.0. Depending on the amino acid sequence of the peptide and the applied cyclodextrin, the addition of crown ethers, especially the Krpytofix® diaza-crown ethers, resulted in significantly enhanced chiral recognition. Keeping one selector of the dual system constant, increasing concentrations of the second selector resulted in increased peak resolution and analyte migration time for peptide-crown ether-cyclodextrin combinations. The simultaneous diastereomer separation of three structurally related peptides was achieved using the dual selector system.

Experimental design-guided development of a stereospecific capillary electrophoresis assay for methionine sulfoxide reductase enzymes using a diastereomeric pentapeptide substrate

A capillary electrophoresis method has been developed and validated to evaluate the stereospecific activity of recombinant human methionine sulfoxide reductase enzymes employing the C-terminally dinitrophenyl-labeled N-acetylated pentapeptide ac-KIFM(O)K-Dnp as substrate (M(O)=methionine sulfoxide). The separation of the ac-KIFM(O)K-Dnp diastereomers and the reduced peptide ac-KIFMK-Dnp was optimized using experimental design with regard to the buffer pH, buffer concentration, sulfated β-cyclodextrin and 15-crown-5 concentration as well as capillary temperature and separation voltage. A fractional factorial response IV design was employed for the identification of the significant factors and a five-level circumscribed central composite design for the final method optimization. Resolution of the peptide diastereomers as well as analyte migration time served as responses in both designs. The resulting optimized conditions included 50mM Tris buffer, pH 7.85, containing 5mM 15-crown-5 and 14.3mg/mL sulfated β-cyclodextrin, at an applied voltage of 25kV and a capillary temperature of 21.5°C. The assay was subsequently applied to the determination of the stereospecificity of recombinant human methionine sulfoxide reductases A and B2. The Michaelis-Menten kinetic data were determined. The pentapeptide proved to be a good substrate for both enzymes. Furthermore, the first separation of methionine sulfoxide peptide diastereomers is reported.

Computational modeling of capillary electrophoretic behavior of primary amines using dual system of 18-crown-6 and β-cyclodextrin

Using capillary electrophoresis (CE) three chiral primary amine compounds 1-aminoindan (AI), 1-(1-naphthyl)ethylamine (NEA) and 1,2,3,4-tetrahydro-1-naphthylamine (THAN), exhibited only partial or no separation when β-cyclodextrin (βCD) was used as chiral selector. The use of 18-crown-6 (18C6) as a second additive with βCD resulted in an enhanced separation. A molecular modeling study, using molecular mechanics and the semiempirical PM6 calculations, was used to help explaining the mechanism of the enantiodifferentiation and to predict the separation process. Optimization of the structures of the complexes by the PM6 method indicate that the poor separation obtained in the presence of the βCD chiral selector alone is due to the small binding energy differences (ΔΔE) of 4.7, 1.1 and 1.2 kcal mol(-1) for AI, NEA and THAN, respectively. In the presence of 18C6 it was suggested that a sandwich compound between 18C6, amine and βCD is formed. Theoretical calculations show that a significant increase in the binding energy is obtained for the sandwich compounds indicating strong hydrophobic and van der Waals interactions that show enhanced enantiodifferentiation.

Enantioseparations by using capillary electrophoretic techniques. The story of 20 and a few more years

This paper provides the author's insight on the past, present and future of performing enantioseparations using capillary electrophoretic (CE) techniques. These techniques are discussed from the historical point of view, as well as based on their potential as the separation techniques of today and the future. The overview covers mechanistic as well as practical aspects of CE techniques.

Investigation of β-CD-derivatized erythromycin as chiral selector in CE

A novel water-soluble beta-CD-derivatized erythromycin (EM) was synthesized and used as an effective chiral selector for the resolution of chiral compounds in CZE. The purpose of substitution at the primary hydroxyl site of beta-CD with 1-oxygen-2,3-epoxypropane is to produce a compound having functions of both beta-CD and EM. beta-CD-derivatized EM exhibited excellent enantioselectivities compared with single beta-CD and EM for chiral separation in CE. We also investigated the influence of pH and concentration of BGE, concentration of chiral selector, applied potential, and organic modifier on chiral compounds' separation.

Enantiomeric separation of underivatized small amines in conventional and on-chip capillary electrophoresis with contactless conductivity detection

The determination of the enantiomers of small non-UV-absorbing amines which otherwise can only be achieved with difficulty was possible by using a combination of the chiral crown ether (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid (18C6H4) and dimethyl-beta-CD as selectors in CE and contactless conductivity measurement for detection. Alkylamines without any other functional group, amino alcohols, species with ether or ester groups and with a cyclic moiety were investigated. The detection limits were found to be about 1.0 microM and the determination is possible up to at least 1.0 mM. The determination of enantiomeric ratios of up to 99.5:0.5 was also found feasible.

Perphenylcarbamoylated β-cyclodextrin bonded-silica particles as chiral stationary phase for enantioseparation by pressure-assisted capillary electrochromatography

Perphenylcarbamoylated beta-cyclodextrin bonded-silica particles (5 microm) were packed into 75-mum fused-silica capillaries, and used for the enantiomer separation of neutral and basic solutes by pressure-assisted capillary electrochromatography. Triethylammonium acetate and phosphate buffer were employed as the BGEs. A cathodic EOF was observed with these two BGEs. Seven chiral analytes were successfully resolved into their enantiomers under optimized conditions, and five of them could be baseline-separated within 12 min due to their high electrophoretic mobility. Better results were achieved with phosphate buffer as the BGE. The effects of organic content and pH on the enantioseparation were also investigated.

Chiral separation principles in chromatographic and electromigration techniques

Almost half of the drugs in use today are chiral. It is well established that the pharmacological activity is mostly restricted to one of the enantiomers (eutomer). There can be qualitative and quantitative differences in the activity of the enantiomers. In many cases, the inactive enantiomer (distomer) shows unwanted side effects or even toxic effects. Even if the side effects are not that drastic, the distomer has to be metabolized and this represents an unnecessary burden for the organism. Therefore, the development of methods for the separation of enantiomers, both on analytical and preparative scale, has become increasingly important. Chromatographic techniques such as thin layer chromatography (TLC), gas chromatography (GC), supercritical fluid chromatography (SFC), and above all high-performance liquid chromatography (HPLC) have been used for enantiomer separation for about two decades. More recently, electromigration techniques, such as capillary electrophoresis and capillary electrochromatography, have been shown to be powerful alternatives to chromatographic methods. This review gives a short overview of different chiral separation principles and their application. Several new developments are discussed.

Chiral separations by capillary electrophoresis: Recent developments and applications

This paper provides an overview of the different classes of chiral selectors that are used in CE. The main properties of every class are described, together with the mechanism of enantioseparation. Newly introduced selectors are also discussed. Pharmaceutical and biomedical applications published from January 2004 till March 2005 are summarized.

Enantiomeric separation of 1-phenylethylamine and 1-cyclohexylethylamine in capillary electrophoresis with contactless conductivity detection

Contactless conductivity detection was employed for the detection of the enantiomers of 1-phenylethylamine and 1-cyclohexylethylamine which were separated in capillary electrophoresis with unprecedented high resolutions R(s) of 2.3 and 3.3, respectively, by using a combination of dimethyl-beta-cyclodextrin and the chiral crown ether 18C6H4 as chiral selectors in a citric acid buffer of pH 2.4. The conductivity measurement enabled the direct detection, i.e. without having to derivatize or resort to indirect methods, of all species including the non-UV-absorbing enantiomers of cyclohexylamine. Detection limits of 0.5 microM were achieved and the determination of enantiomeric ratios of up to 99:1 was found possible.

Recent advances in chiral separation principles in capillary electrophoresis and capillary electrochromatography

This review summarizes recent developments in chiral separation in capillary zone electrophoresis (CZE), electrokinetic chromatography (EKC), and capillary electrochromatography (CEC) covering literature published since the year 2000. New chiral selectors and innovative approaches for CE and CEC are introduced. Recent progress in column technology for CEC is highlighted and the development of new chiral stationary phases is discussed. This review is not dedicated to list applications but will focus on new developments.

Enantioselective capillary electrophoretic separation of tryptophane- and tyrosine-methylesters in a dual system with a tetra-oxadiaza-crown-ether derivative and a cyclodextrin

Different dual selector systems containing a cyclodextrin derivative (methyl-beta-cyclodextrin and dimethyl-beta-cyclodextrin) and a new diaza-crown-ether derivative (N-[2-(1,4,10,13-tetraoxa-7,16-diazacyclooctadecan-7-yl)propanoyl]glycine) were studied in the enantioselective separation of tryptophan-methylester and tyrosine-methylester enantiomers. This paper deals with the systematic study of the effects of changing the composition of the background electrolyte on the resolution of the d- and l- forms using an experimental design approach. It was found that the dual systems allowed a better chiral separation of the amino acid derivatives. The experimental design approach also allowed improving the separation compared to the starting conditions (center point of the design), which were adopted from a previous study.

Rapid Enantioseparation of 1-Aminoindan by Microchip Electrophoresis with Linear-Imaging UV Detection

Chiral separations of 1-aminoindan (AI) by cyclodextrin electrokinetic chromatography (CDEKC) were investigated on microfluidic quartz chips. By using a microchip electrophoresis (MCE) instrument equipped with a linear-imaging UV detector, the separation process of the enantiomeric compounds was observed. When sulfated beta-cyclodextrin was employed as a chiral selector, the baseline separation of AI could be achieved within 1 min with a high repeatability. The relative standard deviation of the migration time was less than 6%. The fastest separation was achieved in 14 s, utilizing a separation length of only 6.1 mm. These results show that the MCE analysis employing a linear imaging UV detector has a significant potential for fast chiral analysis.

Application of tetraoxadiaza-crown ether derivatives as chiral selector modifiers in capillary electrophoresis

Two new diaza-crown ether derivatives (R-1, RS-1) have been synthesized from 1,4,10,13-tetraoxa-7,16-diazacyclooctadecane and tested as potential chiral selectors in capillary electrophoresis (CE) for the chiral separation of five amino acid derivatives. The individual use of the selectors did not lead to chiral differentiation. However, they enhanced the enantioselective effect of different cyclodextrins in dual selector systems. In this paper, we report the effect of different substituted diaza-crown ether derivatives on the separation results obtained in dual systems with cyclodextrins.

Chiral On-Chip Separations of Neurotransmitters

The fast on-chip determination of a range of compounds of relevance in the study and treatment of neurological disorders is demonstrated. These include dopamine and its metabolites methoxytyramine, homovanillic acid, noradrenaline, adrenaline, normetanephrine, and metanephrine, its artificial precursors DOPA and tyrosine; and the related compounds DOPS and CDOPA. Two runs are needed for the determination of these compounds. The enantiomers of adrenaline, noradrenaline, and dopamine can be separated in a buffer containing the novel combination of a cyclodextrin and a dendrimer. The isomers of homovanillic acid, DOPA, CDOPA, methoxytyramine, metanephrine, and normetanephrine, which were found to interact more weakly with cyclodextrins, could be separated in approximately 3 min with a buffer containing a cyclodextrin and a crown ether. To our knowledge, this is the first report of a fast chiral separation of such a complex mixture on an electrophoresis chip. Detection was carried out amperometrically; derivatization of the analytes is not necessary.

Application of diaza-18-crown-6-capped beta-cyclodextrin bonded silica particles as chiral stationary phases for ultrahigh pressure capillary liquid chromatography

Two bonded chiral stationary phases (CSPs), 8-aminoquinoline-2-ylmethyl- and 8-aminoquinoline-7-ylmethyl-diaza-18-crown-6-capped [3-(2-O-beta-cyclodextrin)-2-hydroxypropoxy]propylsilyl silica particles (non-porous, 1.5 microm), have been prepared and evaluated using capillary liquid chromatography at high pressures (> or = 8000 p.s.i.). High column efficiency (up to 400 000 plates m(-1)) was achieved for chiral separations. These CSPs with two recognition sites, i.e. substituted-diaza-18-crown-6 and beta-cyclodextrin combined with high chromatographic efficiency provide good resolution of a variety of enantiomers and positional isomers in relatively short times under reversed-phase conditions. After inclusion of a Ni (II) ion from the mobile phase, the positively charged crown ether-capped beta-cyclodextrin facilitates specific static, dipolar, and host-guest complexation interactions with solutes.

Optimization of the chiral resolution of baclofen by capillary electrophoresis using beta-cyclodextrin as the chiral selector

The chiral resolution of baclofen was achieved by capillary electrophoresis using a fused-silica capillary (60 cm x 75 microm ID). The background electrolyte (BGE) was phosphate buffer (pH 7.0, 50 mM)-acetonitrile (95:5 v/v) containing 10 mM beta-cyclodextrin. The applied voltage was 15 kV. The values of alpha and R(s) were 1.06 and 1.00, respectively. The electrophoretic conditions were optimized varying the pH and the ionic strength of the BGE, concentrations of beta-cyclodextrin and acetonitrile and the applied voltage.

Fast enantioseparation of arylglycine amides by capillary electrophoresis with highly sulfated-beta-cyclodextrin as a chiral selector

Nine racemic arylglycine amides were synthesized and successfully enantioseparated by capillary electrophoresis (CE) using highly sulfated beta-cyclodextrin (HS-beta-CD) as a chiral selector. Baseline enantioseparation of the analytes was obtained around neutral pH but not in the acidic conditions that are commonly used. HS-beta-CD content, buffer pH, type and concentration, and organic modifier concentration were studied and optimized for fast and efficient separation. A chiral CE separation system composed of 1.5% (w/v) HS-beta-CD, 0 to 10% (v/v) methanol and 20 mM 3-(N-morpholino)propanesulfonic acid at pH 6.5 was shown suitable for baseline enantioseparation of the mentioned amides within 6 min, including simultaneous enantioseparation of three positional isomer series (methyl-, methoxyl or chloro-substituted). By using this system, D-enantiomers migrated ahead of the L-enantiomers and the enantiomeric resolution order of arylglycine amides was more or less parallel to the pK(a), order of the analytes.

Application of cyclam-capped beta-cyclodextrin-bonded silica particles as a chiral stationary phase in capillary electrochromatography for enantiomeric separations

Two novel types of substituted cyclam-capped beta-cyclodextrin (beta-CD)-bonded silica particles have been prepared and used as chiral stationary phases in capillary electrochromatography (CEC). The two stationary phases have a chiral selector with three recognition sites: beta-CD, cyclam, and the latter's sidearm. They exhibit excellent enantioselectivities in CEC for a wide range of compounds as a result of the cooperative functioning of the anchored beta-CD and cyclam. After inclusion of the metal ion (Ni2+) from the running buffer into the substituted cyclams and their sidearm ligands, the bonded stationary phases become positively charged and can provide extra electrostatic interactions with ionizable solutes and enhance the dipolar interactions with some polar neutral solutes. This enhances the host-guest interaction with some solutes and improves chiral recognition and enantioselectivity. These new types of stationary phases exhibit great potential for fast chiral separations in CEC.

Chiral separation by chromatographic and electromigration techniques. A review

This review gives a survey of different chiral separation principles and their use in high-performance liquid chromatography (HPLC), gas chromatography (GC), supercritical fluid chromatography (SFC), thin-layer chromatography (TLC), capillary electrophoresis (CE) and capillary electrochromatography (CEC) highlighting new developments and innovative techniques. The mechanisms of the different separation principles are briefly discussed and some selected applications are shown.

Fast enantiomeric separation of basis drugs by electrokinetic chromatography. Application to the quantitation of terbutaline in a pharmaceutical preparation

Electrokinetic chromatography (EKC) using micelles of bile salts alone or mixed with sodium dodecyl sulfate (SDS) and neutral, anionic, or cationic cyclodextrins (CDs) in the separation buffer has been employed in order to achieve fast enantiomeric separation of basic drugs. A study of the enantiomeric separation ability of these chiral selectors concerning four basic drugs (epinephrine, terbutaline, clenbuterol, and salbutamol) has been carried out under different experimental conditions. The best chiral selectors to perform the enantiomeric separation of these drugs were neutral beta-CD derivatives, specifically permethylated beta-CD PM-beta-CD. The effect of the PM-beta-CD concentration, temperature, and applied voltage on the enantiomeric resolution of the basic drugs was investigated. The use of a 25 mM ammonium acetate buffer (pH 5.0), 30 mM in PM-beta-CD together with an applied voltage of 20 kV and a temperature of 15 degrees C enabled the individual and fast enantiomeric separation of epinephrine, norepinephrine, terbutaline, clenbuterol, and salbutamol each one into its two enantiomers in less than 3 min. The EKC method was validated (precision and accuracy) to quantitate terbutaline in a pharmaceutical preparation, obtaining a limit of detection of 4 microg/mL.

Mechanistic study of enantiomeric recognition of primary amino compounds using an achiral crown ether with cyclodextrin by capillary electrophoresis and nuclear magnetic resonance

A model and theoretical equations are presented to investigate the enantiomeric recognition mechanism of primary amino compounds using an achiral crown ether with cyclodextrin by capillary electrophoresis (CE) and nuclear magnetic resonance (NMR). Association constants were calculated from CE and 1H NMR experiment results on the basis of the model and the equations. The key step of chiral recognition was identified from those values. Using CE analyses of three primary amino compounds [1-(1-naphthyl)ethylamine; 1-aminoindan; 1,2,3,4-tetrahydro-1-naphthylamine], the key step was identified with the equilibrium where the complex of a primary amino compound and 18-crown-6 becomes associated with 2,6-di-O-methyl-beta-cyclodextrin for all the three compounds. From the 1H NMR analyses of 1-(1-naphthyl)ethylamine, the key step was identified with the equilibrium where the complex of 1-(1-naphthyl)ethylamine and 18-crown-6 becomes associated with beta-cyclodextrin.

Enantioseparations in capillary electromigration techniques: recent developments and future trends

This review summarizes the current status of enantioseparations using capillary electromigration techniques and gives the authors insights on the selected fundamental aspects and future trends in this field. The most recent developments in the field of chiral separations using capillary electrophoresis (CE) and capillary electrochromatography (CEC) are summarized. The status of chiral electromigration techniques is evaluated tacking into account the most recent developments in related techniques such as chiral HPLC, GC and SFC.

Recent progress in chiral separation principles in capillary electrophoresis

This review summarizes recent developments in the field of chiral separations by electromigration techniques including capillary zone electrophoresis (CZE), capillary gel electrophoresis (CGE), isotachophoresis (ITP), electrokinetic chromatography (EKC), and capillary electrochromatography (CEC). This overview focuses on the development of new chiral selectors and the introduction of new techniques rather than applications of already established selectors and methods. The mechanisms of the different chiral separation principles are discussed.