Fiber-optic-based UV–visible absorbance detector for capillary electrophoresis, utilizing focusing optical elements

Reciprocating free-flow isoelectric focusing with online array ultraviolet detector for process monitoring of protein separation

Free-flow isoelectric focusing (FFIEF) is a useful tool for separating and purifying proteins, DNA, cells, and organelles, etc. However, the online monitoring of each fraction during an FFIEF run has not been achieved yet, resulting in a lack of process monitoring of FFIEF. Herein, an online array ultraviolet (UV) detection system was developed for the easy assay of FFE fractions. The detector was integrated with an apparatus of FFIEF with 32 fractions to show the online monitoring, and bovine serum albumin (BSA) and lysozyme were chosen as the model proteins for manifesting the UV detector performance. The experiments revealed that (i) all the fluidic cells had good linearity from 0.03 to 10 mg/mL BSA and fair limits of detection (LODs) of 0.01 mg/mL; (ii) all the cells had good uniformity of UV absorbance; and (iii) the deviations of intra-day and inter-day of UV detector were respectively 3.8% and 5.8%, indicating the fair stability of the UV detector. The UV detector could be well used for the process monitoring of two model proteins through the whole FFIEF run, and the online absorbance assay of proteins at the end of FFIEF. The UV detector herein had the evident potential for rapid and convenient assay of protein fraction in FFIEF as well as other FFE modes.

Internal standard method for the measurement of doxorubicin and daunorubicin by capillary electrophoresis with in-column double optical-fiber LED-induced fluorescence detection

An internal standard method has been developed for the simultaneous determination of anthracycline antibiotics, doxorubicin (DOX) and daunorubicin (DAN), in rabbit plasma using capillary electrophoresis (CE) with in-column double optical-fiber LED-induced fluorescence detection (CE-ICDOF-LED-FLD). Rhodamine B (RhB) was selected as an internal standard because its emission wavelength is similar to that of the anthracycline antibiotics. Parameters including buffer pH, buffer concentration, organic solvents and separation voltage have been investigated to explore the sensitivity and separation efficiency of DOX and DAN. The optimal electrophoretic separation conditions were a borate buffer (15 mM, pH 9.0) containing 50% acetonitrile (v/v), 10 s hydrodynamic injection at a height of 20 cm and a separation voltage of 15 kV. The developed CE-ICDOF-LED-FLD method provides limits of detection of 18 and 13 ng/mL for DOX and DAN in rabbit plasma samples, respectively. The recoveries ranging from 93.7 to 104.8% and the relative standard deviations at 1.1-1.7% were achieved for DOX and DAN in spiked rabbit plasma samples.

In-column fiber-optic laser-induced fluorescence detection for CE

A highly sensitive in-column fiber-optic LIF detector for CE has been constructed and evaluated. In this detection system, a 457-nm diode-pumped solid-state blue laser was used as the excitation light source and an optical fiber (40 mum od) was used to transmit the excitation light. One end of the optical fiber was inserted into the separation capillary and was in situ positioned at the detection window. The other end of the fiber was protruded from the capillary to capture the excitation light beam from the blue laser. Fluorescence emission was collected by a 40 x microscope objective, focused on a spatial filter, and passed through a yellow color filter before reaching the photomultiplier tube. The present CE-fluorescence detection is a simple and compact optical system. It reduces the laser scattering effect from the capillary and fiber as compared to the conventional LIF detection for CE. Its utility was successfully demonstrated by the separation and determination of D-penicillamine labeled with naphthalene-2,3-dicarboxaldehyde. The detection limit was 0.8 nM (S/N = 3). The present detection scheme has been proven to be attractive for sensitive fluorescence detection for CE.

Optical fiber light-emitting diode-induced fluorescence detection for capillary electrophoresis

A highly sensitive optical fiber light-emitting diode (LED)-induced fluorescence detector for CE has been constructed and evaluated. In this detector, a violet or blue LED was used as the excitation source and an optical fiber with 40 microm OD was used to transmit the excitation light. The upper end of the fiber was inserted into the separation capillary and was situated right at the detection window. Fluorescence emission was collected by a 40 x microscope objective, focused on a spatial filter, and passed through a cutoff filter before reaching the photomultiplier tube. Output signals were recorded and processed with a computer using in-house written software. The present CE/fluorescence detector deploys a simple and inexpensive optical system that requires only an LED as the light source. Its utility was successfully demonstrated by the separation and determination of amino acids (AAs) labeled with naphthalene-2,3-dicarboxaldehyde (NDA) and FITC. Low detection limits were obtained ranging from 17 to 23 nM for NDA-tagged AAs and 8 to 12 nM for FITC-labeled AAs (S/N=3). By virtue of such valuable features as low cost, convenience, and miniaturization, the presented detection scheme was proven to be attractive for sensitive fluorescence detection in CE.

Integrated Light Collimating System for Extended Optical-Path-Length Absorbance Detection in Microchip-Based Capillary Electrophoresis

We have developed an integrated light collimating system with a microlens and a pair of slits for extended optical path length absorbance detection in a capillary electrophoresis (CE) microchip. The collimating system is made of the same material as the chip, poly(dimethylsiloxane) (PDMS), and it is integrated into the chip during the molding of the CE microchannels. In this microchip, the centers of an extended 500-microm detection cell and two optical fibers are self-aligned, and a planoconvex microlens (r = 50 microm) for light collimation is placed in front of a light-delivering fiber. To block stray light, two rectangular apertures, realized by a specially designed three-dimensional microchannel, are made on each end of the detection cell. In comparison to conventional extended detection cell having no collimator, the percentage of stray radiation readout fraction in the collimator integrated detection cell is significantly reduced from 31.6 to 3.8%. The effective optical path length is increased from 324 to 460 microm in the collimator integrated detection cell. The detection sensitivity is increased by 10 times in the newly developed absorbance detection cell as compared to an unextended, 50-microm-long detection cell. The concentration detection limit (S/N = 3) for fluorescein in the collimator integrated detection cell is 1.2 microM at the absorbance detection limit of 0.001 AU.

Capillary zone electrophoresis in wide bore capillary tubes with fiber-coupled diode array detection

This feasibility study deals with the use of a wide bore (320 microm I.D.) capillary tube for the detection and identification of capillary zone electrophoresis (CZE) analytes by optical fiber-coupled diode array detection. A 250-microm mean effective pathlength of the detection cell with an inherently enhanced photon flux through the cell were significant contributors in reaching 0.2-1 micromol/l concentration detectabilities of the CZE analytes by this combination. Experiments with model analytes (p-sulfanilic, sorbic and naphthalene-2-sulfonic acids, tryptophan and asulam) revealed that spectral confirmations of their identities were still possible when their concentrations in the loaded samples (200 nl) were 1-5 micromol/l. Here, chemometry procedures (target transformation factor analysis, fixed size moving window-target transformation factor analysis, fixed size moving window-evolving factor analysis and orthogonal projection approach) employed in the data processing effectively contributed to reliable confirmation of the identities of the analytes also in critical situations (e.g. peak overlaps). The CZE separations were carried out in tandem-coupled columns of identical I.D. This made it possible to use, in the first column of the tandem, carrier electrolyte solutions that provide the desired separative effects, while in the second (detection) column the compositions of the carrier electrolyte solutions employed could reflect favorable conditions for obtaining spectral data. Mixtures containing model constituents at significantly differing concentrations and Maillard's reaction products spiked with tryptophan enantiomers were employed in experiments aimed at assessing practical applicabilities and limits of the present approach to the analysis of samples characterized by complex ionic matrices.

Determination of orotic acid in urine by capillary zone electrophoresis in tandem-coupled columns with diode array detection

Analytical potentialities of capillary zone electrophoresis in the separation system with tandem-coupled columns to the spectral identification and determination of orotic acid (OA) in urine by diode array detection (DAD), coupled to the separation system via optical fibers, were investigated. A very significant "in-column" clean-up of OA from urine matrix was reached in the separation stage of the tandem by combining a low pH (2.8) with complexing effects of electroneutral agents [alpha- and beta-cyclodextrins, poly(vinylpyrrolidone) and 3-(N,N-dimethyldodecylammonio)propanesulfonate]. Due to this, its DAD spectral data could be acquired in the detection stage of the tandem with almost no disturbances by matrix co-migrants. The concentration limits of detection obtained under such working conditions for a 200-nl sample load of OA and 320 microm I.D. capillary tubes were 3.5 micromol/l (218 nm) and 0.4 micromol/l (280 nm). Using chemometry procedures (target transformation factor analysis, fixed size moving window-evolving factor analysis, orthogonal projection approach and fixed size moving window-target transformation factor analysis) in processing of the acquired spectral data, the presence of OA in the loaded urine matrix could be confirmed with confidence when its concentration was 10 micromol/l or slightly less.