Liquid chromatography with fluorimetric detection of triorganotin compounds in marine biological materials

Speciation of organotin compounds by capillary electrophoresis: comparison of aqueous and mixed organic-aqueous systems

A capillary electrophoresis method with direct ultraviolet detection was developed for the analysis of organotin species. Despite the fact that direct detection of organotin compounds by ultraviolet absorption is difficult because most organotins possess poor chromophoric properties, the application of low wavelength (lambda = 200 nm) and mixed organic-aqueous media enabled a significant enhancement in sensitivity. A mixed organic-aqueous system (10% methanol/40% acetonitrile/50% H2O) containing acetic acid and tetrabutylammonium perchlorate formed the basis for rapid, efficient and sensitive determinations of organotin cations such as tripropyltin, tributyltin, triphenyltin and diphenyltin. The concentration limits of detection (LOD) for the four organotin compounds were in the range of 0.4-14 microM, comparable to that obtained with the most sensitive indirect UV method reported until now, and took advantage of a stable baseline, a symmetric peak shape and an absence of disturbing system peaks. The relative standard deviations (n = 7) for the relative peak time and peak area were 0.44-0.77 and 4.8-5.8%, respectively. In addition to sensitivity enhancements, the use of organic-aqueous systems instead of pure aqueous media resulted in improved selectivity and efficiency of separations.

Determination of triorganotin species in water samples by liquid chromatography-electrospray-mass spectrometry

Liquid chromatography coupled to electrospray-mass spectrometry (LC-ES-MS) with positive ion detection was evaluated for the determination of tributyltin and triphenyltin in water samples using tripropyltin as internal standard. The separation was performed in the isocratic mode on a silica-based C18 column with a mobile phase containing 0.02% trifluoroacetic acid in acetonitrile-water (50:50, v/v). The optimum LC-ES-MS conditions were established and quantification was performed on the basis of the [M]+ ions. Limits of detection for standard solutions were 100 and 200 pg Sn injected for triphenyltin and tributyltin, respectively, and good reproducibility was observed. Solid-phase extraction was carried out on C18 cartridges to preconcentrate the analytes from natural water samples, with recoveries ranging from 80 to 110%. Limits of detection for SPE-LC-ES-MS were in the range of low ng l(-1), which demonstrates the suitability of the method for environmental samples.

Speciation of butyl- and phenyltin compounds in sediments using pressurized liquid extraction and liquid chromatography-inductively coupled plasma mass spectrometry

A liquid chromatographic method with inductively coupled plasma mass spectrometry is proposed for the speciation of butyl- (monobutyltin, dibutyltin, tributyltin) and phenyl- (monophenyltin, diphenyltin, triphenyltin) tin compounds in sediments. After evaluation of different additives in the mobile phase, the use of 0.075% (w/v) of tropolone and 0.1% (v/v) of triethylamine in a mobile phase of methanol-acetic acid-water (72.5:6:21.5) allowed the best chromatographic separation of the six compounds. Pressurized liquid extraction (PLE) with a methanolic mixture of 0.5 M acetic acid and 0.2% (w/v) of tropolone was suitable for the quantitative extraction of butyl- and phenyltin compounds with recovery values ranging from 72 to 102%. This analytical approach was compared to conventional solvent extraction methods making use of acids and/or organic solvent of medium polarity. The main advantages of PLE over conventional solvent extraction are: (i) the possibility to extract quantitatively DPhT and MPhT from sediments, which could not be done by a solvent extraction approach; (ii) to preserve the structural integrity of the organotin compounds; (iii) to reduce the extraction time from several hours in case of solvent extraction techniques to just 30 min. For spiked sediments, limits of detection ranged from 0.7 to 2 ng/g of tin according to the compound. The relative standard deviations were found to be between 8 and 15%. The developed analytical procedure was validated using a reference material and was applied to various environmental samples.

Determination of butyltin and phenyltin species by reversed-phase liquid chromatography and fluorimetric detection

Chromatographic separation of monobutyltin (MBT), monophenyltin (MPhT), dibutyltin (DBT), diphenyltin (DPhT), tributyltin (TBT) and triphenyltin (TPhT) was studied using end-capped reversed-phases (RP) and methanol-acetic acid-water or acetronitrile-acetic acid-water mixtures as mobile phases. Several RP columns were evaluated, and the effect of acetic acid, oxalic acid, triethylamine, and organic modifier on peak shape and retention was examined. A method based on gradient elution RPLC and fluorimetric detection is proposed for the determination of DBT, DPhT, TBT and TPhT. The sensitivity of the method makes it suitable for environmental analysis.