Simultaneous pulsed flame photometric and mass spectrometric detection for enhanced pesticide analysis capabilities

Aroma Characterization of Roasted Meat and Meat Substitutes Using Gas Chromatography-Mass Spectrometry with Simultaneous Selective Detection and a Dedicated Software Tool, AromaMS

The development of healthier and more sustainable food products, such as plant-based meat substitutes (PBMSs), have received significant interest in recent years. A thorough understanding of the aroma composition can support efforts to improve the sensory properties of PBMS products and promote their consumer acceptability. Here, we developed an integrated hardware and software approach for aroma analysis of roasted food based on simultaneous analysis with three complementary detectors. Following the standard procedure of aroma headspace sampling and separation using solid-phase microextraction-gas chromatography, the column flow was split into three channels for the following detectors for the selective detection of nitrogen and sulfur (N/S)-containing compounds: an electron ionization-mass spectrometry for identification through a library search, a nitrogen-phosphorous detector, and a flame-photometric detector (FPD)/pulsed-FPD. Integration of results from the different types of detectors was achieved using a software tool, called AromaMS, developed in-house for data processing. As stipulated by the user, AromaMS performed either non-targeted screening for all volatile organic compounds (VOCs) or selective screening for N/S-containing VOCs that play a major role in the aroma experience. User-defined parameters for library matching and the retention index were applied to further eliminate false identifications. This new approach was successfully applied for comparative analysis of roasted meat and PBMS samples.

Software-Assisted Automated Detection and Identification of "Unknown" Analogues: Implementation on V-Type Nerve Agents

V-type nerve agents are among the most toxic organophosphorus chemical warfare agents, and they are under strict regulation and supervision by the OPCW (Organization for the Prohibition of Chemical Weapons). The V-type class of materials refers to a potentially large number of analogues and isomers. In order to expose instances of unfulfillment of the OPCW treaty, it is essential to have the ability to detect and identify "unknown" analogues of this family, even in the absence of an analytical standard. This work demonstrates a new automated tool for the detection and identification of V-type analogues, using high-resolution-accurate-mass LC-MS analysis, followed by "Compound Discoverer" software data processing. This software, originally developed for metabolism and metabolomics screening, is used here to automatically detect various V-type analogues by picking peaks and comparing them to "in-silico" calculated modifications made on a predefined basic V-backbone structure (according to the OPCW definitions for V-type agents). Subsequently, a complete structural elucidation for the proposed molecular formula is obtained by MS/MS data analysis of the suspected component, for both the V-type analogue (using ESI(+) analysis) as well as its hydrolysis product (using ESI(-) analysis) for a better elucidation of the phosphonate "head" structure. This method was found to be useful for the detection and identification of several "unknown" analogues, at low ng/mL levels in soil extracts.

Whole blood analysis for medical diagnostics by GC-MS with Cold EI

This study covers a new method and related instrumentation for whole blood analysis for medical diagnostics. Two-μL whole blood samples were collected using "minimal invasive" diabetes lancet and placed on a thin glass rod mounted on a newly designed BloodProbe. The BloodProbe with the whole blood sample was inserted directly into a ChromatoProbe mounted on the GC inlet, and thus, no sample preparation was involved. The analysis was performed within 10 min using a GC-MS with Cold EI that is based on interfacing GC and MS with supersonic molecular beams (SMB) along with electron ionization of vibrationally cold sample compounds in the SMB (hence the name Cold EI). Our blood analysis revealed several observations: (1) Detailed mass chromatograms were generated with full range of all the nonpolar lipids in blood including fatty acids, cholesterol, cholesteryl esters, vitamin E, monoglycerides, diglycerides, and triglycerides. (2) The analysis of whole blood was found to be as informative as the conventional clinical analysis of blood serum. (3) Cholesteryl esters were more sensitive than free cholesterol alone to the effect of diet of obese people. (4) Major enhancement of several fatty acid methyl esters was found in the blood of a cancer patient with liver dysfunction. (5) Vitamin E as both α- and β-tocopherol was found with person-dependent ratio of these two compounds. (6) Elemental sulfur S₈ was identified in blood. (7) Several drugs and other compounds were found and need further study of their correlation to medical issues.

Critical review and re-assessment of analyte protectants in gas chromatography

Despite nearly 80 years of advancements in gas chromatography (GC), indirect chemical matrix effects (MEs), known as the matrix-induced response enhancement effect, still occur to cause a high bias in the GC analysis of susceptible analytes, unless precautions are taken. Matrix-matched calibration is one common option used in GC to compensate for the MEs, but this approach is usually inconvenient, imprecise, and inefficient. Other options, such as the method of standard additions, surface deactivation techniques, chemical derivatizations, priming the GC, and/or use of internal standards, also have flaws in practice. When methods are accommodating, the use of analyte protectants (APs) can provide the best practical solution to not only overcome MEs, but also to maximize analyte signal by increasing chromatographic and detection efficiencies for the analytes. APs address the source of MEs in every injection by filling active sites in the GC inlet, column, and detector, particularly in GC-MS, rather than the analytes that would otherwise undergo degradation, peak tailing, and/or diminished response due to interactions with the active sites. The addition of an adequate amount of APs (e.g. sugar derivatives) to all calibration standards and final extracts alike often leads to lower detection limits, better accuracy, narrower peaks, and greater robustness than the other options to compensate for MEs in GC. This article consists of a critical review of the scientific literature, proposal of mechanisms and theory, and re-evaluation studies involving APs for the first time in GC-orbitrap and GC-MS/MS with a high-efficiency ion source design. The findings showed that 1 µg each of co-injected shikimic acid and sorbitol in the former case, and 1 µg shikimic acid alone in the latter case, led to high quality results in multi-residue analysis of pesticides and environmental contaminants.

Comprehensive two-dimensional gas chromatography coupled to high-resolution time-of-flight mass spectrometry and simultaneous nitrogen phosphorous and mass spectrometric detection for characterization of nanoparticles in roadside atmosphere

A method is described for characterization of size-resolved particles including the nanoparticles fraction with a diameter of 29-58 nm in roadside atmosphere. The method is based on thermal desorption (TD) of a sample followed by comprehensive two-dimensional gas chromatography (GC x GC) with novel detection capabilities, including high resolution time-of-flight mass spectrometry (HRTOF-MS) and simultaneous detection with a nitrogen phosphorous detector (NPD) and a quadrupole mass spectrometer (qMS). Increased selectivity with the GC x GC-HRTOF-MS allows a group type separation of a selected chemical class, e.g. oxygenated polycyclic aromatic hydrocarbons (oxy-PAHs), using mass chromatography with a 0.05 Da wide window in the complex sample matrix. Also, exact mass measurements provide candidate elemental compositions as well as NIST library search results for tentative identifications of 50 compounds. Moreover, the simultaneous detection with the NPD and the qMS elucidate the presence of 15 nitrogen-containing compounds. Quantitative analysis of selected PAHs in several size-resolved particles was also performed by use of the TD-GC x GC-qMS with limited scan range. The method showed good linearity (r2>0.988) and high sensitivity (limit of quantification: <10 pg) for most of the target PAHs. The concentration of PAHs per particulate matter (PM) mass in nanoparticles was considerably higher than those of larger size of particles with a diameter of >102 nm.

Protocols for optimizing MS/MS parameters with an ion-trap GC-MS instrument

The product ion spectrum allows us to achieve very selective detection of pesticides and to eliminate the ambiguities caused by more conventional analytical approaches. Owing to the enhanced capabilities of GC/MS/MS for multiresidue pesticides, the development of a GC/MS/MS pesticides library will be useful. The aim of this study was to develop a sensitive and specific analytical method for the identification and quantification of compounds without the need of a time-consuming procedure. Two methods were studied in order to optimize the nonresonant conditions of dissociation of five pesticides (deltamethrin, metalaxyl, myclobutanil, procymidone, pirimicarb). The first permits a systematic investigation of the influence of the qz trapping parameter on sensitivity in precursor ion detection and on the efficiency of collision-induced dissociation (CID). The second is more suited for analytical laboratories and less time-consuming and allows us to reach similar results: the experiments were conducted step by step at a constant stability parameter.

A simple and inexpensive “solvent in silicone tube extraction” approach and its evaluation in the gas chromatographic analysis of pesticides in fruits and vegetables

A novel, simple, and inexpensive approach to sorptive extraction, which we call solvent in silicone tube extraction (SiSTEx), was applied to pesticide residue analysis and its effectiveness and efficiency were evaluated. In SiSTEx, which is a form of open tubular sorptive extraction, a piece of silicone tubing (4 cm long, 1.47 mm ID, 1.96 mm OD in this study) is attached to the cap of a 20 mL glass vial that contains the aqueous sample. The tubing is plugged at the end dangling in the sample solution, and MeCN (e.g., 40 microL) added by syringe to the inner tube volume through a septum in the cap. A stir-bar is used to mix the sample for a certain time (e.g., 60 min), which allows chemicals to partition into the tubing where they diffuse across the silicone and partition into the MeCN. The final MeCN extract is then analyzed for the concentrated analytes. In this study, the SiSTEx approach was evaluated for the analysis of organophosphorus (OP) and organochlorine (OC) pesticides in fruits and vegetables using GC/pulsed flame photometric (PFPD) and halogen specific (XSD) detectors for analysis. The produced samples were initially extracted by a rapid MeCN procedure, and 5 mL of the initial extract was diluted four-fold with water to undergo sorptive extraction for 60 min. The final extract was analyzed by GC/PFPD + XSD for 14 OP and 22 OC pesticides. This simple approach was able to detect 26 of the 36 pesticides at 10 ng/g or less original equivalent sample concentration with average reproducibility of 11% RSD. For those 26 pesticides, a 44-fold lower detection limit on average was achieved in matrix extracts using SiSTEx despite the four-fold dilution with water.

Organotin speciation in Bizerte lagoon (Tunisia)

For the first time, organotins have been assessed in samples collected from Bizerte lagoon, in Tunisia, during two seasons (summer and winter). The organotin distribution was studied in marine sediments and mussels tissues of this lagoon. Butyl-, phenyl- and octyltins were determined using a rapid speciation analytical method based on one-step ethylation/extraction with sodium tetraethylborate in aqueous phase. Simultaneously to the ethylation, the extraction was performed by either liquid/liquid extraction (LLE) or head-space solid phase microextraction (HS-SPME). Gas chromatography with pulsed flame photometric detection (GC-PFPD) was used to perform quantitative determination. The technique has been validated using biological and sediment reference materials. The different samples from Bizerte lagoon were found to be moderately contaminated, especially by butyltins. This pollution was attributed to industrial activities, which are very important in this area. Organotins appeared accumulated in both sediments and mussels, while significant degradations of triorganotins to monosubstituted ones was observed in water.

LC-MS/MS and FT-IR analyses of stones from a patient with Crohn’s disease: a case report

This report describes the unusual case of a patient affected by Crohn's disease suffering from intestinal obstruction with recurrent occlusive symptoms not due to the intestinal disease, but to the presence of two calcified foreign bodies in the pelvis. The stones were surgically removed and analysed by reverse-phase liquid chromatography coupled to UV diode array detection and mass spectrometry (LC-UV-DAD-MS/MS), Chromatoprobe-MS/MS and by Fourier-transform-infrared spectroscopy (FT-IR) techniques. The combined mass spectrometric approaches allowed unequivocally to identify 5-aminosalicylic acid (5-ASA) in stone 1, and to demonstrate that its formation was due to an unmodified 5-ASA tablet, a formulation that must undergo complete dissolution in the small bowel. The second stone was constituted by a solid layer (no solvent-extractable material) identified by FT-IR as a polystyrene fragment. This indicates that accidental ingestion of a plastic material, followed by its calcification, was responsible for its formation.

Investigation on the usage of clay modified electrode for the electrochemical determination of some pollutants

Redox behavior of three pollutants, namely endosulfan (EN), o-chlorophenol (OCP) and direct orange 8 (DO8) were investigated electrochemically using sodium montmorillonite clay modified glassy carbon electrode. Influence of pH, scan rate and concentration were studied on the voltammetric response. Suitable medium for the electrochemical studies of EN was pH 1.0 and for other two pollutants pH 13.0. EN exhibited one well-defined reduction peak accounting for irreversible 2e(-) transfer and leading to the removal of one chlorine atom. OCP underwent one electron oxidation to the formation of phenoxy radical resulting in an oxidation peak. DO8 showed two peaks for reductions and two peaks for oxidation as a result of the reduction of azo group and oxidation of phenoxide group. These electrochemical reactions of the three pollutants reveals the suitability of clay modified electrode for the electroanalysis. A differential pulse stripping voltammetric procedure for the determination of these pollutants was developed. The limits of determination for EN, OCP and DO8 are 5-300, 10-800 and 50-800 ppb, respectively.

Use of the Keele injector for sample introduction for gas chromatographic analysis of vinclozolin in lettuces

We examined a Keele injector for sample introduction for gas chromatographic analysis of vinclozolin treated in lettuces. Samples in milligram quantity were introduced into a glass tube in a Keele injector at a gas chromatograph injection port. The glass tube was then crushed to allow the sample to carry onto a capillary column in a normal manner. The standard calibration curve for quantitative detection of vinclozolin was obtained by determining vinclozolin spiked in samples at variable concentrations. The calibration curve showed a linear response to vinclozolin ranging from 0.05 to 1.0 microg/g, giving a slope value of 174.8, the y-intercept value of -2.8146 and the mean r2-value of 0.9994. Limit of quantification for vinclozolin was 0.05 microg/g by this method, comparable to 0.01 microg/g by a normal injector. When samples treated previously with vinclozolin were determined by the Keele injector, vinclozolin was found to be about 30% lower as compared to a normal method, suggesting about 70% recovery of the spiked vinclozolin by the Keele injector. From these results, the Keele injector was suggested to be potential for sample introduction in gas chromatographic analysis of vinclozolin in lettuce samples.

Targeted Multidimensional Gas Chromatography Using Microswitching and Cryogenic Modulation

A new method is described that allows fast target analysis in multidimensional gas chromatography by using a microswitching valve between two GC columns, with cryogenic trapping and rapid re-injection of trapped solutes in the second dimension. The essence of the procedure is that heart-cut fractions from the first column (1D) can be selectively transferred to column 2 (2D), where a moveable cryogenic trap first focuses the transferred solute(s) at the head of the second column and then permits their facile rapid analysis on 2D. Since 2D is a short narrow-bore column, which exhibits very fast analysis (on the order of a few seconds elution), peak responses (heights) are significantly enhanced (by up to 40-fold). Additionally, by using a 2D phase of a selectivity different from that used for 1D, it is possible to also separate components that are not resolved on the first column and to increase the resolution for other compounds. The heart-cut valve isolates the section(s) of solutes of interest from the first column separation, and this provides a considerable simplification to the chromatogram-in addition to the separation and sensitivity advantages. By using this method, multidimensional gas chromatography with multiple heart-cuts can be completed within the same time as the primary column separation. Since the described method permits non-heart-cut fractions to be transferred to a monitor detector, normal detection of these fractions is still permitted. By modulation of the cryotrap, it is also possible to achieve comprehensive two-dimensional gas chromatography for the heart-cut fractions; however, only those compounds passed to the second, separation column, which passes through the cryotrap, will be subjected to GC x GC analysis. The technique and the various modes of operation are described in this paper.

Extending the range of compounds amenable for gas chromatography-mass spectrometric analysis

Gas chromatography-mass spectrometry (GC-MS) suffers from a major limitation in that an expanding number of thermally labile or low volatility compounds of interest are not amenable for analysis. We found that the elution temperatures of compounds from GC can be significantly lowered by reducing the column length, increasing the carrier gas flow rate, reducing the capillary column film thickness and lowering the temperature programming rate. Pyrene is eluted at 287 degrees C in standard GC-MS with a 30 m x 0.25 mm I.D. column with 1-microm DB5ms film and 1-ml/min He column flow rate. In contrast, pyrene is eluted at 79 degrees C in our "Supersonic GC-MS" system using a 1 m x 0.25 mm I.D. column with 0.1-microm DB5ms film and 100-ml/min He column flow rate. A simple model has been invoked to explain the significantly (up to 208 degrees C) lower elution temperatures observed. According to this model, every halving of the temperature programming rate, or number of separation plates (either through increased flow rate or due to reduced column length), results in approximately 20 degrees C lower elution temperature. These considerably lower elution temperatures enable the analysis of an extended range of thermally labile and low volatility compounds, that otherwise could not be analyzed by standard GC-MS. We demonstrate the analysis of large polycyclic aromatic hydrocarbons (PAHs) such as decacyclene with ten fused rings, well above the current GC limit of PAHs with six rings. Even a metalloporphirin such as magnesiumoctaethylporphin was easily analyzed with elution temperatures below 300 degrees C. Furthermore, a range of thermally labile compounds were analyzed including carbamates such as methomyl, aldicarb, aldicarbsulfone and oxamyl, explosives such as pentaerythritol tetranitrate, Tetryl and HMX, and drugs such as reserpine (608 a.m.u.). Supersonic GC-MS was used, based on the coupling of a supersonic molecular beam (SMB) inlet and ion sources with a bench-top Agilent 6890 GC plus 5972 MSD. The Supersonic GC-MS provides enhanced molecular ion without any ion source related peak tailing. Thus, the lower GC separation power involved in the analysis of thermally labile and low volatility compounds is compensated by increased separation power of the MS gained from the enhanced molecular ion. Several implications of these findings are discussed, including our conclusion that slower chromatography leads to better analysis of thermally labile compounds.

Fast, high-sensitivity, multipesticide analysis of complex mixtures with supersonic gas chromatography-mass spectrometry

We developed a new instrumental approach, termed Supersonic GC-MS, which achieves fast, sensitive, confirmatory and quantitative analysis of a broad range of pesticides in complex agricultural matrices. Our Supersonic GC-MS system is a modification of a bench-top Agilent 6890 GC+5972 MSD with a supersonic molecular beam (SMB) interface and fly-through EI ion source. One of the main advantages of Supersonic GC-MS is an enhanced molecular ion (M+) in the resulting mass spectra. For example, the M+ was observed in all 88 pesticides that we studied using the Supersonic GC-MS whereas only 36 of 63 (57%) pesticides that we investigated in standard GC-MS exhibited a M+. We also found that the degree of matrix interference is exponentially reduced with the fragment mass by about 20-fold per 100 amu increasing mass. The enhancement of the M+ combined with the reduction in matrix background noise permit rapid full scan analysis of a potentially unlimited number of pesticides, unlike selected ion monitoring or MS-MS in which specific conditions are required in segments for targeted pesticides. Furthermore, unlike the case with chemical ionization, EI-SMB-MS spectra still give accurate identification of compounds using common mass spectral libraries. In practice,we found thatlibraries favor mass spectra in which the M+ appears, thus Supersonic GC-MS produced better spectra for compound identification than standard GC-MS. To achieve even lower identification limits, the M+ plus a second major ion (still using full scan data) gives higher signal-to-chemical noise ratios than the traditional 3-ion approach. The replacement of two low-mass ions with the M+ (supersonic two-ions method) results in a significant reduction of matrix interference by a factor of up to 90. Another main advantage of Supersonic GC-MS is its exceptional suitability for fast GC-MS with high carrier gas flow-rate. Fast Supersonic GC-MS was able to analyze thermally labile pesticides, such as carbamates, that are difficult or impossible to analyze in standard GC-MS. Large volume injection using a ChromatoProbe was also demonstrated, in the 6 min analysis of pesticides at 20 ng/g in a spice matrix.

Application of gas chromatography-tandem mass spectrometry to the analysis of pesticides in fruits and vegetables

A new analytical method was devised using gas chromatography with tandem mass spectrometry (GC-MS-MS) for the routine analysis of 31 multi-class pesticide residues and approximately 8000 fresh fruit and vegetable samples (green bean, cucumber, pepper, tomato, eggplant, watermelon, melon, and marrow). Extraction of the pesticides with dichloromethane was carried out. The optimal ionization mode, either electron impact or chemical ionization, was selected for each pesticide in the same run. Carbofrit was used in the liner and combined with the selectivity of the detector this avoided additional clean-up. Thus, not only was money and time saved, the uncertainty of the method was decreased in its application to routine analysis. The average recoveries in cucumber obtained for each pesticide ranged between 71 and 119% at two different fortification levels (n=10 each) that ranged between 7 and 300 ng g(-1) (depending on the pesticide). The relative standard deviation was lower than 19% for all compounds tested. The calculated limits of detection and quantification were typically <1 ng g(-1) which were much lower than the maximum residue levels established by European legislations.

Solid-phase microextraction method for gas chromatography with mass spectrometric and pulsed flame photometric detection: studies of organoarsenical speciation

The development, optimization, and application of a novel method for arsenic speciation based on capillary gas-liquid chromatography with simultaneous quadrupole ion-trap mass spectrometric (MS) detection and pulsed flame photometric detection (PFPD) is described. The method couples the sensitive arsenic-selectivity of PFPD with the structure elucidation capability of molecular MS detection for the determination of trace levels of unknown organoarsenicals in complex matrices. The conditions that affect the PFPD response in the presence of interfering species were optimized using the sequential Simplex algorithm for three key factors: gate delay (18.3 ms), gate width (9.1 ms), and combustion gas composition (16.6 ml/min H2). Complete discrimination in the PFPD of the arsenic signal from interfering S-, C-, and OH-emitting species that are problematic in existing methods was achieved. Additionally, a revised interpretation of our previously reported mechanism [J. Chromatogr. A 807 (1998) 253] for the dithiol derivatization and subsequent GC-MS determination of dimethylarsinic acid is presented.

SnifProbe: new method and device for vapor and gas sampling

SnifProbe is based on the use of 15 mm short pieces of standard 0.53 mm I.D. capillary or porous layer open tubular columns for sampling airborne, headspace, aroma or air pollution samples. A miniaturized frit-bottomed packed vial named MicroSPE was also prepared which served for the sampling of solvent vapors and gases as well as liquid water. The short (15 mm) trapping column is inserted into the SnifProbe easy-insertion-port and the SnifProbe is located or aimed at the sample environment. A miniature pump is operated for pumping 10-60 ml/min of the air sample through the short piece of column to collect the sample. After a few seconds up to a few minutes of pumping, the short column is removed from the SnifProbe with tweezers (or gloved hands) and placed inside a glass vial of a direct sample introduction device (ChromatoProbe) having a 0.5 mm hole at its bottom. The ChromatoProbe sample holder with its glass vial and sample in the short column are introduced into the GC injector as usual. The sample is then quickly and efficiently desorbed from the short sample column and is transferred into the analytical column for conventional GC and/or GC-MS analysis. We have explored the various characteristics of SnifProbe and demonstrated its applicability and effectiveness in many applications. These applications include: the analysis of benzene, toluene and o-xylene in air, SO2 in air, perfume aroma on hand, beer headspace, wine aroma, coffee aroma, cigarette smoke, trace chemical warfare agent simulants, explosives vapors, ethanol in human breath and odorants in domestic cooking gas. SnifProbe can be operated in the field or at a chemical process. The sample columns can be plugged and stored in a small union storage device, placed in a small plastic bag, marked and brought to the laboratory for analysis with the full power of GC and/or GC-MS. Accordingly, we feel that the major and most significant feature of SnifProbe is that it brings the field and process to the laboratory. Thus, SnifProbe can extend the "arm" of the GC and GC-MS laboratory and enable high-quality field and process analysis.

Comparison of gas chromatography-pulsed flame photometric detection-mass spectrometry, automated mass spectral deconvolution and identification system and gas chromatography-tandem mass spectrometry as tools for trace level detection and identification

The complexity of a matrix is in many cases the major limiting factor in the detection and identification of trace level analytes. In this work, the ability to detect and identify trace level of pesticides in complex matrices was studied and compared in three, relatively new methods: (a) GC-PFPD-MS where simultaneous PFPD (pulsed flame photometric detection) and MS analysis is performed. The PFPD indicates the exact chromatographic time of suspected peaks for their MS identification and provides elemental information; (b) automatic GC-MS data analysis using the AMDIS ("Automated Mass Spectral Deconvolution and Identification System") software by the National Institute of Standards and Technology; (c) GC-MS-MS analysis. A pesticide mixture (MX-5), containing diazinon, methyl parathion, ethyl parathion, methyl trithion and ethion was spiked, in descending levels from 1 ppm to 10 ppb, into soil and sage (spice) extracts and the detection level and identification quality were evaluated in each experiment. PFPD-MS and AMDIS exhibited similar performance, both superior to standard GC-MS, revealing and identifying compounds that did not exhibit an observable GC peak (either buried under the chromatographic background baseline or co-eluting with other interfering GC peaks). GC-MS-MS featured improved detection limits (lower by a factor of 6-8) compared to AMDIS and PFPD-MS. The GC-PFPD-MS-MS combination was found useful in several cases, where no reconstructed ion chromatogram MS-MS peaks existed, but an MS-MS spectrum could still be extracted at the elution time indicated by PFPD. The level of identification and confirmation with MS-MS was inferior to that of the other two techniques. In comparison with the soil matrix, detection limits obtained with the loaded sage matrix were poorer by similar factors for all the techniques studied (factors of 5.8, >6.5 and 4.0 for AMDIS, PFPD-MS and MS-MS, respectively). Based on the above results, the paper discusses the trade-offs between detectivity and identification level with the compared three techniques as well as other more traditional techniques and approaches.

Trace analysis of pesticides by gas chromatography

The analysis of pesticides is relevant to both food quality and the environment. Many laboratories are occupied with the analysis of pesticides in food, water or soil. Capillary gas chromatography is the technique most widely used in pesticide analysis. In present laboratory practice it serves as a screening method for over 300 pesticides. In this review we describe the role of gas chromatography as an analytical tool in combination with currently used or recently developed sample preparation techniques.